Contact Information

If you need to contact ASRock or want to know more about ASRock, you’re
welcome to visit ASRock’s website at http://www.asrock.com; or you may contact
your dealer for further information. For technical questions, please submit a
support request form at https://event.asrock.com/tsd.asp

ASRock Incorporation
e-mail: [email protected]

ASRock EUROPE B.V.

e-mail: [email protected]

ASRock America, Inc.

e-mail: [email protected]

Scan the QR code to view more manuals and documents.

Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 5

1.4 I/O Panel 7

1.5 Block Diagram 8

Chapter 2 Installation 9
2.1 Installing the CPU 10

2.2 Installing the CPU Fan and Heatsink 12

2.3 Installing Memory Modules (DIMM) 13

2.4 Connecting the Front Panel Header 15

2.5 Installing the I/O Panel Shield 16

2.6 Installing the Motherboard 17

2.7 Installing SATA Drives 18

2.8 Installing a Graphics Card 20

2.9 Connecting Peripheral Devices 22

2.10 Connecting the Power Connectors 23

2.11 Power On 24

2.12 Jumpers Setup 25

2.13 Onboard Headers and Connectors 26

2.14 M.2 SSD Module Installation Guide (M2_1) 33

 H510M-HDV/M.2 SE

Chapter 1 Introduction
Thank you for purchasing ASRock H510M-HDV/M.2 SE motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.

1.1 Package Contents

• ASRock H510M-HDV/M.2 SE Motherboard (Micro ATX Form Factor)
• ASRock H510M-HDV/M.2 SE User Manual
• 1 x I/O Shield
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x Screw for M.2 Socket (Optional)

English

1
 1.2 Specifications

Platform • Micro ATX Form Factor

th th TM
CPU • Supports 10 Gen & 11 Gen Intel® Core Processors
(LGA1200)
• Supports Intel® Turbo Boost Max 3.0 Technology

Chipset • Intel® H470

Memory • Dual Channel DDR4 Memory Technology

• 2 x DDR4 DIMM Slots
• Supports DDR4 3200/2933/2800/2666/2400/2133 non-ECC,
un-buffered memory*
• Supports ECC UDIMM memory modules (operate in non-
ECC mode)
• Max. capacity of system memory: 64GB
• Supports Intel® Extreme Memory Profile (XMP) 2.0
• 15μ Gold Contact in DIMM Slots
* 11th Gen Intel® CoreTM (i9/i7/i5) support DDR4 3200 natively;
CoreTM (i3), Pentium® and Celeron® support DDR4 2666
natively.
* 10th Gen Intel® CoreTM (i9/i7) support DDR4 2933 natively;
CoreTM (i5/i3), Pentium® and Celeron® support DDR4 2666
natively.
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)

Expansion Intel® 11th Gen & 10th Gen Processors:

Slot • 1 x PCIe 4.0 x16 Slot (PCIE1)*
Intel® 11th Gen Processors support PCIe 4.0 x16
Intel® 10th Gen Processors support PCIe 3.0 x16
Intel® H470 Chipset:
• 1 x PCIe 3.0 x1 Slot (PCIE2)*

* Supports NVMe SSD as boot disks

English

Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
integrated.
2
 H510M-HDV/M.2 SE

• Graphics specifications may vary between CPU types.

• 1 x HDMI
Intel® 11th Gen Processors support HDMI 2.0, HDCP 2.3
and max. resolution up to 4K 60Hz
Intel® 10th Gen Processors support HDMI 1.4, HDCP 2.3
and max. resolution up to 4K 30Hz
• 1 x DVI-D, supports HDCP 2.3 and max. resolution up to
Full HD (1920x1200) 60Hz
• 1 x D-Sub, supports max. resolution up to Full HD
(1920x1200) 60Hz

Audio • 7.1 CH HD Audio (Realtek ALC897 Audio Codec)

LAN • Gigabit LAN 10/100/1000 Mb/s

• Realtek 8111H

USB • 6 x USB 3.2 Gen1 (4 Rear, 2 Front)

• 6 x USB 2.0 (2 Rear, 4 Front)
* All USB ports support ESD Protection

Rear Panel • 1 x PS/2 Mouse/Keyboard Port

I/O • 1 x D-Sub Port
• 1 x DVI-D Port
• 1 x HDMI Port
• 2 x USB 2.0 Ports
• 4 x USB 3.2 Gen1 Ports
• 1 x RJ-45 LAN Port
• HD Audio Jacks: Line in / Front Speaker / Microphone

Storage Chipset:
• 1 x Ultra M.2 Socket (M2_1, Key M), supports type
2260/2280 SATA3 6.0 Gb/s & PCIe Gen3x4 (32 Gb/s) modes*
• 4 x SATA3 6.0 Gb/s Connectors

* Supports Intel® OptaneTM Technology

English

* Supports NVMe SSD as boot disks

RAID • Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA

storage devices

3
 Connector • 1 x COM Port Header
• 1 x SPI TPM Header
• 1 x Chassis Intrusion and Speaker Header
• 1 x CPU Fan Connector (4-pin)*
• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)**
• 2 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
Speed Control)***
• 1 x 24 pin ATX Power Connector

• 1 x 8 pin 12V Power Connector

• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
* CPU_FAN1 supports the fan power up to 1A (12W).
** CPU_FAN2/WP supports the fan power up to 2A (24W).
*** CHA_FAN1~2/WP support the fan power up to 2A (24W).
*** CPU_FAN2/WP and CHA_FAN1~2/WP can auto detect if
3-pin or 4-pin fan is in use.

BIOS • AMI UEFI Legal BIOS with GUI support

Feature

OS • Microsoft® Windows® 10 64-bit / 11 64-bit

Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
English

overclocking.

4
 H510M-HDV/M.2 SE

1.3 Motherboard Layout

English

5
 No. Description
1 ATX 12V Power Connector (ATX12V1)
2 CPU Fan Connector (CPU_FAN1)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4 Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
5 ATX Power Connector (ATXPWR1)
6 USB 3.2 Gen1 Header (USB32_5_6)
7 SATA3 Connectors (SATA3_0)(Upper), (SATA3_1)(Lower)
8 SATA3 Connectors (SATA3_2)(Upper), (SATA3_3)(Lower)
9 SPI TPM Header (SPI_TPM_J1)
10 System Panel Header (PANEL1)
11 Chassis Intrusion and Speaker Header (SPK_CI1)
12 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
13 USB 2.0 Header (USB_5_6)
14 USB 2.0 Header (USB_3_4)
15 Clear CMOS Jumper (CLRMOS1)
16 COM Port Header (COM1)
17 CPU/Water Pump Fan Connector (CPU_FAN2/WP)
18 Front Panel Audio Header (HD_AUDIO1)
English

6
 H510M-HDV/M.2 SE

1.4 I/O Panel

4
1 2 3 5

11 10 9 8 7 6

No. Description No. Description

1 D-Sub Port 7 USB 3.2 Gen1 Type-A Ports (USB32_34)
2 PS/2 Mouse/Keyboard Port 8 USB 2.0 Ports (USB_12)
3 LAN RJ-45 Port* 9 USB 3.2 Gen1 Type-A Ports (USB32_12)
4 Line In (Light Blue)** 10 DVI-D Port
5 Front Speaker (Lime)** 11 HDMI Port
6 Microphone (Pink)**

* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

** Function of the Audio Ports in 7.1-channel Configuration:

English

Port Function
Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out
7
 1.5 Block Diagram

PCIe x16 Gen4 SLOT (PCIE1) x16 Gen4 Channel A DDR4

*10th processor runs Gen3x16

INTEL Channel B DDR4

10th & 11th
DIGITAL PORT C HDMI
Processor
DIGITAL PORT D DVI

VGA IT6516BFN eDP

DMI 3.0

x4 Gen3 / SATA
M.2 slot (M2_1)
ALC897 24MHz

x1 Gen3
PCIe x1 Gen3 SLOT (PCIE2)
RTL8111H LAN x1 Gen3

INTEL
USB3.2 Gen1 5Gb/s H470 6Gb/s
SATA3_0 SATA3_2
6 ports(2*Front+4*Rear) SATA3_1 SATA3_3

USB2.0 480Mb/s
6 ports(4*Front+2*Rear)

SPI SPI FLASH

128Mb

SPI TPM header

33MHz
LPC BUS

CPU_FAN1 COM Port header

SIO
CPU_FAN2/WP NCT3947S Nuvoton NCT6796D-E
CHA_FAN1/WP NCT3947S PS2 port
CHA_FAN2/WP NCT3947S
English

8
 H510M-HDV/M.2 SE

Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a
grounded wrist strap or touch a safety grounded object before you handle the
components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

English

9
 2.1 Installing the CPU

1. Before you insert the 1200-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

2
English

10
 H510M-HDV/M.2 SE

3 4

English

Please save and replace the cover if the processor is removed. The cover must be
placed if you wish to return the motherboard for after service.

11
 2.2 Installing the CPU Fan and Heatsink

1 2

AN
_F
U
CP
English

12
 H510M-HDV/M.2 SE

2.3 Installing Memory Modules (DIMM)

This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one memory
module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
4. The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.

English

13
 3
2
1

14
English
 H510M-HDV/M.2 SE

2.4 Connecting the Front Panel Header

:
6
(5
: ('
32 '
/
'
+
/( 

6:
('

7
'

6(
/
(5

5(
:

(5
32

:
32

2
RESET SW
HDD LED

3$1(/

System Panel Header Front Panel Wires

10 9

Power SW (-) RESET SW (+)

B D
Power SW (+) RESET SW (-)

Power LED (-) HDD LED (-)

A C
Power LED (+) HDD LED (+) A B C D
English

2 1
PANEL1

15
 2.5 Installing the I/O Panel Shield

1
English

16
 H510M-HDV/M.2 SE

2.6 Installing the Motherboard

English

17
 2.7 Installing SATA Drives

Optical Drive

SATA Drive

SATA Data Cable

English

18
 H510M-HDV/M.2 SE

SATA Power Connector

SATA Data Connector

English

19
 2.8 Installing a Graphics Card

CLICK!
English

20
 H510M-HDV/M.2 SE

Expansion Slots (PCIe Slots)

There are 2 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.

PCIe slots:

PCIE1 (PCIe 4.0 x16 slot) is used for PCIe x16 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.

English

21
 2.9 Connecting Peripheral Devices
English

22
 H510M-HDV/M.2 SE

2.10 Connecting the Power Connectors

$7;9 $7;3:5
English

23
 2.11 Power On

1 3

4
English

24
 H510M-HDV/M.2 SE

2.12 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.

Clear CMOS Jumper

(CLRMOS1) (see p.5, No. 15)
CLRMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please turn
off the computer and unplug the power cord, then use a jumper cap to short the
pins on CLRMOS1 for 3 seconds. Please remember to remove the jumper cap after
clearing the CMOS. If you need to clear the CMOS when you just finish updating
the BIOS, you must boot up the system first, and then shut it down before you do
the clear-CMOS action.

CLRMOS1

2-pin Jumper

Short: Clear CMOS

Open: Default
English

25
 2.13 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.

System Panel Header

(9-pin PANEL1) (see p.5, No. 10)
Connect the power button, reset button and system status indicator on the chassis
to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.

PANEL1
PLED+
PLED-
PWRBTN#
GND

1
GND
RESET#
GND
HDLED-
HDLED+

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way
to turn off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to
restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep
state. The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

English

Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
26
 H510M-HDV/M.2 SE

Chassis Intrusion and Speaker Header

(7-pin SPK_CI1) (see p.5, No. 11)
Please connect the chassis intrusion and the chassis speaker to this header.

SPK_CI1
SPEAKER
DUMMY
DUMMY
+5V

SIGNAL
GND
DUMMY

Serial ATA3 Connectors

Right Angle:
(SATA3_0) (see p.5, No. 7) (Upper)
(SATA3_1) (see p.5, No. 7) (Lower)
(SATA3_2) (see p.5, No. 8) (Upper)
(SATA3_3) (see p.5, No. 8) (Lower)
These four SATA3 connectors support SATA data cables for internal storage
devices with up to 6.0 Gb/s data transfer rate.
SATA3_1
SATA3_0

SATA3_3
SATA3_2

English

27
 USB 2.0 Headers
(9-pin USB_5_6) (see p.5, No. 13)
(9-pin USB_3_4) (see p.5, No. 14)
There are two headers on this motherboard. Each USB 2.0 header can support
two ports.

USB_3_4
USB_PWR
-B
+B
GND
DUMMY

1
GND
+A
-A
USB_PWR

USB_5_6
USB_PWR
-B
+B
GND
DUMMY

1
GND
+A
-A
USB_PWR

USB 3.2 Gen1 Header

(19-pin USB32_5_6) (see p.5, No. 6)
There is one header on this motherboard. This USB 3.2 Gen1 header can support
two ports.

USB32_5_6
Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
English

28
 H510M-HDV/M.2 SE

Front Panel Audio Header

(9-pin HD_AUDIO1) (see p.5, No. 18)
This header is for connecting audio devices to the front audio panel.

HD_AUDIO1
GND
PRESENCE#
MIC_RET
OUT_RET

1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L

High Definition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.

Chassis/Water Pump Fan Connectors

(4-pin CHA_FAN1/WP) (see p.5, No. 4)
(4-pin CHA_FAN2/WP) (see p.5, No. 12)
This motherboard provides two 4-Pin water cooling chassis fan connectors. If you plan to
connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.

CHA_FAN1/WP
4 3 2 1

FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
English

CHA_FAN2/WP
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

1 2 3 4

29
 CPU Fan Connector
(4-pin CPU_FAN1) (see p.5, No. 2)
This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to
connect a 3-Pin CPU fan, please connect it to Pin 1-3.

CPU_FAN1
+12V
CPU_FAN_SPEED
GND FAN_SPEED_CONTROL

1 2 3 4

CPU/Water Pump Fan Connector

(4-pin CPU_FAN2/WP) (see p.5, No. 17)
This motherboard provides a 4-Pin water cooling CPU fan connector. If you plan
to connect a 3-Pin CPU water cooler fan, please connect it to Pin 1-3.

CPU_FAN2/WP
FAN_SPEED_CONTROL
CPU_FAN_SPEED
FAN_VOLTAGE
GND

1 2 3 4
English

30
 H510M-HDV/M.2 SE

ATX Power Connector

(24-pin ATXPWR1) (see p.5, No. 5)
This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX
power supply, please plug it along Pin 1 and Pin 13.

ATXPWR1
12 24

1 13

ATX 12V Power Connector

(8-pin ATX12V1) (see p.5, No. 1)
This motherboard provides a 8-pin ATX 12V power connector. To use a 4-pin
ATX power supply, please plug it along Pin 1 and Pin 5.
*Warning: Please make sure that the power cable connected is for the CPU and
not the graphics card. Do not plug the PCIe power cable to this
connector.

ATX12V1
8 5

4 1
English

31
 SPI TPM Header
(13-pin SPI_TPM_J1) (see p.5, No. 9)
This connector supports SPI Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords, and data. A TPM system also
helps enhance network security, protects digital identities, and ensures platform
integrity.

SPI_TPM_J1
SPI_DQ3
SPI_PWR
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ

SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2

Serial Port Header

(9-pin COM1) (see p.5, No. 16)
This COM header supports serial port module.

COM1
RRXD1
DDTR#1
DDSR#1
CCTS#1

1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
English

32
 H510M-HDV/M.2 SE

2.14 M.2 SSD Module Installation Guide (M2_1)

The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Ultra M.2 Socket (M2_1, Key M) supports type 2260/2280 SATA3 6.0 Gb/s &
PCIe Gen3x4 (32 Gb/s) modes.

Installing the M.2 SSD Module

Step 1

Prepare a M.2 SSD module and the

screw.

Step 2

Depending on the PCB type and

length of your M.2 SSD module, find
the corresponding nut location to be
used.

No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280
English

33
 Step 3

Move the standoff based on the

module type and length.
The standoff is placed at the nut
location B by default. Skip Step 3
and 4 and go straight to Step 5 if you
are going to use the default nut.
Otherwise, release the standoff by
hand.

Step 4

Peel off the yellow protective film on

the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.

Step 5

Align and gently insert the M.2 SSD

module into the M.2 slot. Please be
aware that the M.2 SSD module only
B A 20o
fits in one orientation.

B A

Step 6

Tighten the screw with a screwdriver

to secure the module into place.
English

Please do not overtighten the screw

B NUT2 NUT1
as this might damage the module.

For the latest updates of M.2 SSD module support list, please visit our website for details:
34 http://www.asrock.com
Version 1.0
Published March 2023

Copyright©2023 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from
any defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
 INTEL END USER SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software
only in its unmodified and binary form, (with the accompanying documentation, the
“Software”) for Licensee’s personal use only, and not commercial use, in connection with
Intel-based products for which the Software has been provided, subject to the following
conditions:
(a) Licensee may not disclose, distribute or transfer any part of the Software, and You
agree to prevent unauthorized copying of the Software.
(b) Licensee may not reverse engineer, decompile, or disassemble the Software.
(c) Licensee may not sublicense the Software.
(d) The Software may contain the software and other intellectual property of third party
suppliers, some of which may be identified in, and licensed in accordance with, an en-
closed license.txt file or other text or file.
(e) Intel has no obligation to provide any support, technical assistance or updates for the
Software.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its licensors or suppliers. The Software is copyrighted and protected
by the laws of the United States and other countries, and international treaty provisions.
Licensee may not remove any copyright notices from the Software. Except as otherwise
expressly provided above, Intel grants no express or implied right under Intel patents,
copyrights, trademarks, or other intellectual property rights. Transfer of the license ter-
minates Licensee’s right to use the Software.
DISCLAIMER OF WARRANTY. The Software is provided “AS IS” without warranty of
any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUR-
POSE.
LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS
WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF
BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAG-
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN
IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. This Agreement does NOT
obligate Licensee to provide Intel with comments or suggestions regarding the Software.
However, if Licensee provides Intel with comments or suggestions for the modification,
correction, improvement or enhancement of (a) the Software or (b) Intel products or pro-
cesses that work with the Software, Licensee grants to Intel a non-exclusive, worldwide,
perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense,
under Licensee’s intellectual property rights, to incorporate or otherwise utilize those
comments and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license
at any time if Licensee is in breach of any of its terms or conditions. Upon termination,
Licensee will immediately destroy or return to Intel all copies of the Software.
THIRD PARTY BENEFICIARY. Intel is an intended beneficiary of the End User License
Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as
defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial
computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent
with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide
the Software to the U.S. Government. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will
export/re-export the Software, directly or indirectly, to any country for which the U.S.
Department of Commerce or any other agency or department of the U.S. Government
or the foreign government from where it is shipping requires an export license, or other
governmental approval, without first obtaining any such required license or approval. In
the event the Software is exported from the U.S.A. or re-exported from a foreign destina-
tion by Licensee, Licensee will ensure that the distribution and export/re-export or import
of the Software complies with all laws, regulations, orders, or other restrictions of the U.S.
Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. This Agreement and any dispute arising out of or relating to it will
be governed by the laws of the U.S.A. and Delaware, without regard to conflict of laws
principles. The Parties to this Agreement exclude the application of the United Nations
Convention on Contracts for the International Sale of Goods (1980). The state and federal
courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute aris-
ing out of or relating to this Agreement. The Parties consent to personal jurisdiction and
venue in those courts. A Party that obtains a judgment against the other Party in the
courts identified in this section may enforce that judgment in any court that has jurisdic-
tion over the Parties.
Licensee’s specific rights may vary from country to country.
 WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related UKCA Directives. Full text of UKCA
declaration of conformity is available at: http://www.asrock.com

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related Directives. Full text of EU declaration of
conformity is available at: http://www.asrock.com
ASRock follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASRock product is in line with
global
environmental regulations. In addition, ASRock disclose the relevant information based
on regulation requirements.
Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for informa-
tion disclosure based on regulation requirements ASRock is complied with.

DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.