Harmonic filters up to 110kW | DATASHEET

Approvals
EF3H
Passive harmonic filter *
up to 110 kW Technical data
Rated power 2,2-110 kW
Rated voltage 380-415 V ±10%
Rated frequency 50 Hz

THDi according to IEEE 519

110% Pn (continuous)
Overload capability
160% Pn 1 min/h (momentary)
Capacitive power
≤20% Pn
consumption at no load
40°C – land design
Max ambient
45°C – maritime design
temperature
≥50°C – heavy duty design
F (2,2-75 kW, 155°C)
Insulation class
H (90-110 kW, 180°C)
Winding material copper

Standard equipment NC temperature switch

Mounting wall mounted

Degree of protection IP20, IP00
Standards compatibility PN-EN 60076-6
*- UL approved insulation system

Function Benefits Application

Mitigation of harmonics caused by non-linear ▪ Lower input current RMS ▪ Electric drives
loads is vital procedure if it comes to energy value
▪ 6-pulse rectifiers
cost reduction. ElhandHF™ Harmonic filter
▪ Lower power losses
allows to utilize system power capacity to ▪ Energy chargers
maximum degree, protects against shortened ▪ Increased energy quality
▪ Systems sensitive to
installation life and equipment malfunction. Due
▪ Extended lifetime of energy quality
to compact design, filter can be easily integrated
another devices installed
with existing system and is ready to use right ▪ Light and heavy industry
in the system
after installation. Compensation of harmonics
by filter application helps to comply with IEEE ▪ Very low capacitive input ▪ Marine equipment
519, EN-61000-3 or other energy quality current in no load state ▪ Oil & Gas
standards.

http://www.en.elhand.pl | +48 343 473 100

 Harmonic filters up to 110kW | DATASHEET | 2

Dimensions
IP20
380-415 V, 50 Hz, IP00

Power of drive L B H d e f Weight

No. Type of filter
[kW] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

1 EF3H-2,2kW 2,2 230 252 358 212 300 4x7 15

2 EF3H-3kW 3 230 252 358 212 300 4x7 16

3 EF3H-4kW 4 230 252 358 212 300 4x7 19

4 EF3H-5,5kW 5,5 275 267 408 257 350 4x9 23

5 EF3H-7,5kW 7,5 275 267 408 257 350 4x9 27

6 EF3H-11kW 11 310 282 535 292 475 4x9 34

7 EF3H-15kW 15 310 282 535 292 475 4x9 44

8 EF3H-18,5kW 18,5 370 340 600 346 2x285 6x11 56

9 EF3H-22kW 22 370 340 600 346 2x285 6x11 64

10 EF3H-30kW 30 370 340 600 346 2x285 6x11 75

11 EF3H-37kW 37 420 400 735 396 2x352,5 6x11 88

12 EF3H-45kW 45 420 400 735 396 2x352,5 6x11 101

13 EF3H-55kW 55 420 400 735 396 2x352,5 6x11 123

14 EF3H-75kW 75 420 400 735 396 2x352,5 6x11 145

15 EF3H-90kW 90 460 420 990 436 2x480 6x11 183

16 EF3H-110kW 110 460 420 990 436 2x480 6x11 202

Manufacturer reserves the right to make changes resulting from the continuous development of products offered

Drawings
IP20

http://www.en.elhand.pl | +48 343 473 100

 Harmonic filters up to 110kW | DATASHEET | 3

Dimensions
IP00
380-415 V, 50 Hz, IP00

Power of drive L B H d e f Weight

No. Type of filter
[kW] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

1 EF3H-2,2kW 2,2 230 188 358 212 300 4x7 12

2 EF3H-3kW 3 230 188 358 212 300 4x7 13

3 EF3H-4kW 4 230 206 358 212 300 4x7 16

4 EF3H-5,5kW 5,5 275 211 408 257 350 4x9 19

5 EF3H-7,5kW 7,5 275 238 408 257 350 4x9 23

6 EF3H-11kW 11 310 253 535 292 475 4x9 28

7 EF3H-15kW 15 310 263 535 292 475 4x9 37

8 EF3H-18,5kW 18,5 370 269 600 346 2x285 6x11 47

9 EF3H-22kW 22 370 279 600 346 2x285 6x11 54

10 EF3H-30kW 30 370 324 600 346 2x285 6x11 64

11 EF3H-37kW 37 420 334 735 396 2x352,5 6x11 76

12 EF3H-45kW 45 420 344 735 396 2x352,5 6x11 87

13 EF3H-55kW 55 420 374 735 396 2x352,5 6x11 108

14 EF3H-75kW 75 420 384 735 396 2x352,5 6x11 129

15 EF3H-90kW 90 460 394 990 436 2x480 6x11 167

16 EF3H-110kW 110 460 404 990 436 2x480 6x11 186

Manufacturer reserves the right to make changes resulting from the continuous development of products offered

Dimensional drawings
IP00

http://www.en.elhand.pl | +48 343 473 100

 Harmonic filters up to 110kW | DATASHEET | 4

Typical application schematic diagram

Product code
E F 3 H 900 kW 380-415V 50Hz T40H AL IP20
Manufacturer symbol

Rated supply voltage

Rated power of filter
Number of phases

Protection degree
Winding material
Rated frequency
Application type
Instrument type

Insulation class

Blank if copper

Blank if IP00
Special execution
Products with parameters exceeding the catalog card can be made upon prior contact.

Contact
Elhand Transformatory Sp. z o.o.

ul. Klonowa 60 +48 (34) 34 73 100

42-700 Lubliniec
Śląskie, Polska [email protected]

https://www.linkedin.com/company/elhand-transformatory/

V05.21

http://www.en.elhand.pl | +48 343 473 100