0% found this document useful (0 votes)
27 views2 pages

IP Camera Quick Start Guide 8.1.38.4

This document provides a quick start guide for setting up an IP camera, including network settings, connection procedures, and safety precautions. It outlines the steps for ensuring the PC and camera are on the same network segment, how to ping the device, and instructions for downloading necessary software. Additionally, it includes information on adding devices to the FreeIP app for real-time video monitoring.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
27 views2 pages

IP Camera Quick Start Guide 8.1.38.4

This document provides a quick start guide for setting up an IP camera, including network settings, connection procedures, and safety precautions. It outlines the steps for ensuring the PC and camera are on the same network segment, how to ping the device, and instructions for downloading necessary software. Additionally, it includes information on adding devices to the FreeIP app for real-time video monitoring.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1.Network Settings 2.Ping device address 3.

Connection and login


IPv4 address of the PC needs to be in the same network segment ① Connect camera and PC by network cable in the same LAN, power Please download and install OCX plugin when the first time you
as the IP address of the IP camera to make it could be used on. Connecting as following (PoE switch, camera, PC connection connect to the camera, open 【 Search Tool 】, double
normally(Note: The default IP address of the IP Camera: photo).
click the camera you need to connect, webpage of login will come
192.168.1.168.). Specific settings in window system can refer to
out, then click【Download】to download the OCX plugin and install.
the following methods:
Method one: After installation, please click to refresh the webpage and input user
and password (Default Factory setting user is admin, default
① Check the IPv4 address of PC, click 【Start】 / 【Control Panel】 /
【Network and Internet】 / 【Network and Sharing Center】 / 【Local password is admin, we strongly suggest you to change the user and
Network】 / 【Details】. password to higher safety level), details are shown as below photo.

IP Camera
Quick Start Guide ② Left click window【Start 】menu, input ”cmd” in【Program/
file searcher】 to open window command(or you can press
shortcut ”win+R” directly on keyboard to input ”cmd”), from the Cursor
blinking side, input ”Ping *** *** *** ***” and press “Enter” (For
example, when the camera IP address is 192.168.1.168, then input
“ping 192.168.1.168” and press ”Enter”) to check the system statistical
② Set the PC IPv4 address(E.g PC:192.168.1.165) connect information. For example as below photo, when system
statistical connect information is data package: sent=4, received=4,
loss=0, <0% loss> means PC and camera signal communication is
normal, you can login the camera by webpage.
3-1

Please read this manual carefully and keep it properly before using our
network camera products.
Related tools and documents of products, please download from
www.herospeed.net.

③ Or add PC and network cameras in a same network segment


Statement (E.g:192.168.1.165).

Thank you for using our products, please read this manual carefully
before trying.
3-2
This manual is applicable to network series products.
This manual may contain information that is technically inaccurate,
inconsistent in the product's function and operation, or in a
typographical error. Our company will update the context in the
manual according to the enhancement of product features. Updated
content will be added in the new version of this manual without
further notice. If there is manual description of the product does not
match with the physical, in order to prevail in kind.

Note: The IPv4 address can not be conflicted when you add in
LAN.
Safety Precautions
This equipment should be installed in a well-ventilated environment.
Method Two:
Please keep proper space with the ground during installation. It is Use IP search tool 6.1.4.2 or above version, changing searched IP 3-3
good for the heat dissipation of the machine. Do not block the camera to the same network segment as the PC's. (Note: Default IP
ventilation door of the equipment, away from the heat source and address of the IP Camera: 192.168.1.168. Default Username: admin,
avoid high temperature environment. default password: admin; the changed URL can not conflict with the IP
This product can not withstand heavy loads. Do not place heavy address of other devices in the LAN).
objects or multi-layer overlays on this product.
Power must be under safety certification, Its output voltage, current,
voltage polarity and operating temperature must comply with the
power requirements of this equipment.
When using this equipment in thunder and lightning conditions,
please pay attention to install lightning protection device or cut off
the power.
In order to get high quality video and pictures, make sure your 3-4
internet connection is stable and smooth.

1 2 3 4
4.Real-time preview and parameter 5.Add Device 6.FreeIP Download 7.Add Devices on FreeIP App
configuration
Before adding device, please confirm that the IP address of NVR Download and install FreeIP on smart phone by following way: Open FreeIP App ( New user please register an account ),
① Enter the user name and password of the device in the and the device are in the same network segment and do not ① In the Android phone Google App Store or iPhone App Store follow up next steps to add the devices.
browser user interface and enter the real-time preview interface. conflict.
enter “FreeIP” search, download and install.
Click the 【Camera】under the NVR main menu to enter the menu
② Scan the following QR Codes to download and install the
and click【Add】. Tick the device to be added and click 【Add】,
click 【Cancel】 to complete the addition. As shown in the App.
following figure: ③ Download from the following websites.

Android App download address:


https://play.google.com/store/apps/details?id=com.xc.hdscreen

② Click 【Configuration】 to enter the device and other functions,


5-1
including local configuration, system, local network, video, image
and event configuration. Users can selectively set these features to
achieve better performance based on the actual situation of the
application scenario.
① Click 【Device】to enter the ”Device” interface;

② Click【+Add device】, click【SN Add】 ;

③ Scan the QR code printed on the device sticker or posted on

Android App the P2P interface.

④ Enter device user name, password and Captcha (printed on

the label), click 【Submit】,set device name, select group, click


5-2 iOS App download address:
【Add】.
https://itunes.apple.com/cn/app/freeip/id898690336?mt=8
⑤ Click 【Preview】in the sliding menu.

⑥ Click【+】to enter the ”Device” interface;

⑦ Choose the device channel you want to preview, click

【Preview】.

⑧ Start to play the real-time video.

5-3

iOS App

5-4

Under the NVR main menu, you can also set Recording, Playback,
Motion Detection, coding parameters and other operations.

5 6 7 8

You might also like