POLECENIA AUTO CAD 2005 / AUTO CAD 2005 COMMANDS

3DARRAY 3DCLIP 3DCONFIG 3DCORBIT 3DDISTANCE 3DFACE 3DMESH 3DCORBIT 3DORBITCTR 3DPAN 3DPOLY 3DSIN 3DSOUT 3DSWIVEL 3DZOOM ABOUT ACADLSPASDOC

Creates a three-dimensional array Starts the interactive 3D view and opens the Adjust Clipping Planes window
Provides a command-line interface to the 3D graphics system's configuration settings

Starts the interactive 3D view and enables you to set the objects in the 3D view into continuous motion
Starts the interactive 3D view and makes objects appear closer or farther away Creates a three-dimensional face

Creates a free-form polygon mesh

Starts the interactive 3D view and enables you to set the objects in the 3D view into continuous motion Sets the center of rotation in 3D Orbit view Starts the interactive 3D view and enables you to drag the view horizontally and vertically

Creates a polyline of line segments in 3D space

Imports a 3D Studio (3DS) file Exports to a 3D Studio (3DS) file

Starts the interactive 3D view and simulates the effect of turning the camera Starts the interactive 3D view so you can zoom in and out on the view
Displays information about AutoCAD Controls whether AutoCAD loads the acad.lsp file into every drawing or just the first drawing opened in an AutoCAD session Stores the directory path, if any, specified by the ACAD environment variable, with path separators appended if necessary Stores the AutoCAD version number. This variable differs from the DXF file $ACADVER header variable, which contains the drawing database level number Imports an ACIS file Exports AutoCAD solid objects to an ACIS file Controls the ACIS version of SAT files created using the ACISOUT command

ACADPREFIX

ACADVER

ACISIN ACISOUT ACISOUTVER

ADCCLOSE ADCENTER ADCNAVIGATE ADCSTATE AFLAGS ALIGN AMECONVERT ANGBASE ANGDIR APBOX APERTURE APPLOAD ARC AREA ARRAY ARX ASSIST ATTACHURL ATTDEF ATTDIA ATTDISP ATTEDIT ATTEXT ATTMODE ATTREDEF ATTREQ ATTSYNC

Closes DesignCenter Manages and inserts content such as blocks, xrefs, and hatch patterns Loads a specified DesignCenter drawing file, folder, or network path Determines whether DesignCenter is active or not Sets attribute flags for ATTDEF bitcode Aligns objects with other objects in 2D and 3D

Converts AME solid models to AutoCAD solid objects

Sets the base angle to 0 with respect to the current UCS Sets the direction of positive angles Turns the AutoSnap aperture box on or off

Controls the size of the object snap target box

Loads and unloads applications and defines which applications to load at startup

Creates an arc Calculates the area and perimeter of objects or of defined areas
Creates multiple copies of objects in a pattern Loads, unloads, and provides information about ObjectARX applications

Opens the Active Assistance window, which provides either automatic or on-demand context-sensitive information
Attaches hyperlinks to objects or areas in a drawing Creates an attribute definition Controls whether the INSERT command uses a dialog box for attribute value entry Globally controls attribute visibility Changes attribute information Extracts attribute data Controls display of attributes

Redefines a block and updates associated attributes

Determines whether the INSERT command uses default attribute settings during insertion of blocks Updates all instances of a specified block with the current attributes defined for the block

AUDIT AUNITS AUTOSNAP BACKGROUND BACKZ BASE BATTMAN BHATCH BINDTYPE BLIPMODE

Evaluates the integrity of a drawing Sets units for angles Controls AutoSnap marker, tooltip, and magnet Sets up the background for your scene Stores the back clipping plane offset from the target plane for the current viewport, in drawing units Sets the insertion base point for the current drawing Edits attribute properties of a block definition Fills an enclosed area or selected objects with a hatch pattern or gradient fill Controls how xref names are handled when binding xrefs or editing xrefs in place

Controls the display of marker blips

BLOCK BLOCKICON BMPOUT BOUNDARY BOX BREAK BROWSER CAL CAMERA CCONFIG CDATE CECOLOR CELTSCALE CELTYPE CELWEIGHT CHAMFER CHAMFERA

Creates a block definition from objects you select

Generates preview images for blocks displayed in DesignCenter

Saves selected objects to a file in device-independent bitmap format

Creates a region or a polyline from an enclosed area

Creates a three-dimensional solid box

Breaks the selected object between two points Launches the default web browser defined in your system's registry

Evaluates mathematical and geometric expressions

Sets a different camera and target location The CCONFIG command has been discontinued Sets calendar date and time Sets the color of new objects Sets the current object linetype scaling factor Sets the linetype of new objects Sets the lineweight of new objects Bevels the edges of objects Sets the first chamfer distance

CHAMFERB CHAMFERC CHAMFERD CHAMMODE CHANGE CHECKSTANDARDS CHPROP CIRCLE CIRCLERAD CLAYER CLOSE CLOSEALL CMDACTIVE

Sets the second chamfer distance Sets the chamfer length Sets the chamfer angle Sets the input method by which AutoCAD creates chamfers

Changes the properties of existing objects

Checks the current drawing for standards violations

Changes the color, layer, linetype, linetype scale factor, lineweight, thickness, and plot style of an object
Creates a circle Sets the default circle radius Sets the current layer Closes the current drawing Closes all currently open drawings Stores the bitcode that indicates whether an ordinary command, transparent command, script, or dialog box is active Controls whether AutoCAD echoes prompts and input during the AutoLISP command function Displays the names of the active and transparent commands Specifies multiline justification Controls the overall width of a multiline Sets the multiline style that AutoCAD uses to draw the multiline Controls whether the 3D compass is on or off in the current viewport compiles a shape or font file Optimizes 2D polylines and associative hatches created in AutoCAD Release 13 or earlier Converts a color-dependent plot style table (CTB) to a named plot style table (STB) Converts the current drawing to either named or colordependent plot styles Controls when coordinates are updated on the status line Duplicates objects Copies objects with a specified base point Copies objects to the Clipboard

CMDECHO CMDNAMES CMLJUST CMLSCALE CMLSTYLE COMPASS COMPILE CONVERT CONVERTCTB CONVERTPSTYLES COORDS COPY COPYBASE COPYCLIP

COPYHIST COPYLINK CPLOTSTYLE CPROFILE CTAB CURSORSIZE CUSTOMIZE CUTCLIP CVPORT CYLINDER DATE DBCCLOSE DBCONNECT DBCSTATE DBLCLKEDIT DBLIST DBMOD DCTCUST DCTMAIN DDEDIT DDVPOINT DEFLPLSTYLE DEFPLSTYLE DELAY DELOBJ DEMANDLOAD

Copies the text in the command line history to the Clipboard

Copies the current view to the Clipboard for linking to other OLE applications
Controls the current plot style for new objects Displays the name of the current profile Returns the name of the current (model or layout) tab in the drawing Determines the size of the crosshairs as a percentage of the screen size

Customizes toolbars, buttons, and shortcut keys Copies objects to the Clipboard and removes the objects from the drawing
Sets the identification number of the current viewport Creates a three-dimensional solid cylinder Stores the current date and time

Closes the dbConnect Manager

Provides an AutoCAD interface to external database tables Stores the state of the dbConnect Manager, active or not active Controls double-click behavior Lists database information for each object in the drawing dblist Indicates the drawing modification status using bitcode Displays the path and file name of the current custom spelling dictionary Displays the file name of the current main spelling dictionary Edits text, dimension text, attribute definitions, and feature control frames Sets the three-dimensional viewing direction Specifies the default plot style for layer 0. Specifies the default plot style for new objects Provides a timed pause within a script Controls whether objects used to create other objects are retained or deleted from the drawing database Specifies if and when AutoCAD demand-loads a third-party application if a drawing contains custom objects created in that application

DETACHURL DIASTAT DIM and DIM1 DIMADEC DIMALIGNED DIMALT DIMALTD DIMALTF DIMALTRND DIMALTTD DIMALTTZ DIMALTU DIMALTZ DIMANGULAR DIMAPOST

Removes hyperlinks in a drawing Stores the exit method of the most recently used dialog box Accesses Dimensioning mode Controls the number of precision places displayed in angular dimensions Creates an aligned linear dimension Controls the display of alternate units in dimensions Controls the number of decimal places in alternate units Controls the multiplier for alternate units Rounds off the alternate dimension units Sets the number of decimal places for the tolerance values in the alternate units of a dimension Toggles suppression of zeros in tolerance values Sets the units format for alternate units of all dimension style family members except Angular Controls the suppression of zeros for alternate unit dimension values Creates an angular dimension Specifies a text prefix or suffix (or both) to the alternate dimension measurement for all types of dimensions except angular Controls the associativity of dimension objects Controls the associativity of dimension objects Controls the size of dimension line and leader line arrowheads Determines how dimension text and arrows are arranged when space is not sufficient to place both within the extension lines Sets the units format for angular dimensions Suppresses zeros for angular dimensions Creates a linear, angular, or ordinate dimension from the baseline of the previous dimension or a selected dimension Sets the arrowhead block displayed at the ends of dimension lines or leader lines Sets the arrowhead for the first end of the dimension line when DIMSAH is on Sets the arrowhead for the second end of the dimension line when DIMSAH is on

DIMASO DIMASSOC DIMASZ DIMATFIT

DIMAUNIT DIMAZIN DIMBASELINE DIMBLK DIMBLK1 DIMBLK2

DIMCEN

Controls drawing of circle or arc center marks and centerlines by the DIMCENTER, DIMDIAMETER, and DIMRADIUS commands Creates the center mark or the centerlines of circles and arcs Assigns colors to dimension lines, arrowheads, and dimension leader lines Assigns colors to dimension extension lines Assigns colors to dimension text Creates a linear, angular, or ordinate dimension from the second extension line of the previous dimension or a selected dimension Sets the number of decimal places displayed for the primary units of a dimension Creates diameter dimensions for circles and arcs Removes associativity from selected dimensions Sets the distance the dimension line extends beyond the extension line when oblique strokes are drawn instead of arrowheads Controls the spacing of the dimension lines in baseline dimensions Specifies a single-character decimal separator to use when creating dimensions whose unit format is decimal Edits dimensions Specifies how far to extend the extension line beyond the dimension line Specifies how far extension lines are offset from origin points Obsolete. Has no effect except to preserve the integrity of scripts. DIMFIT is replaced by DIMATFIT and DIMTMOVE.

DIMCENTER DIMCLRD DIMCLRE DIMCLRT DIMCONTINUE

DIMDEC DIMDIAMETER DIMDISASSOCIATE DIMDLE

DIMDLI DIMDSEP DIMEDIT DIMEXE DIMEXO DIMFIT DIMFRAC DIMGAP DIMJUST DIMLDRBLK DIMLFAC DIMLIM DIMLINEAR

Sets the fraction format when DIMLUNIT is set to 4 (Architectural) or 5 (Fractional).

Sets the distance around the dimension text when the dimension line breaks to accommodate dimension text Controls the horizontal positioning of dimension text Specifies the arrow type for leaders Sets a scale factor for linear dimension measurements Generates dimension limits as the default text Creates linear dimensions

DIMLUNIT DIMLWD DIMLWE DIMORDINATE DIMOVERRIDE DIMPOST DIMRADIUS DIMREASSOCIATE DIMREGEN DIMRND DIMSAH DIMSCALE DIMSD1 DIMSD2 DIMSE1 DIMSE2 DIMSHO DIMSOXD DIMSTYLE DIMTAD DIMTDEC DIMTEDIT DIMTFAC

Sets units for all dimension types except Angular Assigns lineweight to dimension lines Assigns lineweight to extension lines Creates ordinate point dimensions Overrides dimensioning system variables Specifies a text prefix or suffix (or both) to the dimension measurement Creates radial dimensions for circles and arcs Associates selected dimensions to geometric objects Updates the locations of all associative dimensions Rounds all dimensioning distances to the specified value Controls the display of dimension line arrowhead blocks Sets the overall scale factor applied to dimensioning variables that specify sizes, distances, or offsets Controls suppression of the first dimension line Controls suppression of the second dimension line Suppresses display of the first extension line Suppresses display of the second extension line

Obsolete. Has no effect except to preserve the integrity of scripts.

Suppresses drawing of dimension lines outside the extension lines Creates and modifies dimension styles Controls the vertical position of text in relation to the dimension line. Sets the number of decimal places to display in tolerance values for the primary units in a dimension Moves and rotates dimension text Specifies a scale factor for the text height of fractions and tolerance values relative to the dimension text height, as set by DIMTXT Controls the position of dimension text inside the extension lines for all dimension types except Ordinate Draws text between extension lines Sets the minimum (or lower) tolerance limit for dimension text when DIMTOL or DIMLIM is on

DIMTIH DIMTIX DIMTM

DIMTMOVE DIMTOFL DIMTOH DIMTOL DIMTOLJ DIMTP DIMTSZ DIMTVP DIMTXSTY DIMTXT DIMTZIN DIMUNIT DIMUPT DIMZIN DISPSILH DIST DISTANCE DIVIDE DONUT DONUTID DONUTOD DRAGMODE DRAGP1 DRAGP2 DRAWORDER DSETTINGS

Sets dimension text movement rules Controls whether a dimension line is drawn between the extension lines even when the text is placed outside Controls the position of dimension text outside the extension lines Appends tolerances to dimension text Sets the vertical justification for tolerance values relative to the nominal dimension text Sets the maximum (or upper) tolerance limit for dimension text when DIMTOL or DIMLIM is on Specifies the size of oblique strokes drawn instead of arrowheads for linear, radius, and diameter dimensioning Controls the vertical position of dimension text above or below the dimension line Specifies the text style of the dimension Specifies the height of dimension text, unless the current text style has a fixed height Controls the suppression of zeros in tolerance values

Obsolete. Has no effect except to preserve the integrity of scripts. DIMUNIT is replaced by DIMLUNIT and DIMFRAC.
Controls options for user-positioned text Controls the suppression of zeros in the primary unit value Controls display of silhouette curves of solid objects in Wireframe mode Measures the distance and angle between two points Stores the distance computed by the DIST command Places evenly spaced point objects or blocks along the length or perimeter of an object Draws filled circles and rings

Sets the default for the inside diameter of a donut

Sets the default for the outside diameter of a donut Controls the way AutoCAD displays dragged objects Sets the regen-drag input sampling rate Sets the fast-drag input sampling rate Changes the display order of images and other objects Specifies settings for Snap mode, grid, and polar and object

snap tracking DSVIEWER DVIEW DWGCHECK DWGCODEPAGE DWGNAME DWGPREFIX DWGPROPS DWGTITLED DXBIN EATTEDIT EATTEXT EDGE EDGEMODE EDGESURF ELEV ELEVATION ELLIPSE ERASE ERRNO ETRANSMIT EXPERT EXPLMODE EXPLODE EXPORT EXTEND EXTMAX EXTMIN EXTNAMES Opens the Aerial View window Defines parallel projection or perspective views

Checks drawings for potential problems when opening them

Stores the same value as SYSCODEPAGE (for compatibility reasons) Stores the drawing name as entered by the user Stores the drive/directory prefix for the drawing Sets and displays the properties of the current drawing Indicates whether the current drawing has been named Imports specially coded binary files Edits attributes in a block reference Exports block attribute information to an external file Changes the visibility of three-dimensional face edges Controls how the TRIM and EXTEND commands determine cutting and boundary edges Creates a three-dimensional polygon mesh Sets elevation and extrusion thickness of new objects Stores the current elevation relative to the current UCS for the current viewport in the current space Creates an ellipse or an elliptical arc Removes objects from a drawing Displays the number of the appropriate error code when an AutoLISP function call causes an error that AutoCAD detects Creates a transmittal set of a drawing and related files Controls whether certain prompts are issued Controls whether the EXPLODE command supports nonuniformly scaled (NUS) blocks Breaks a compound object into its component objects Saves objects to other file formats Extends an object to meet another object Stores the upper-right point of the drawing extents Stores the lower-left point of the drawing extents Sets the parameters for named object names (such as linetypes

and layers) stored in definition tables EXTRUDE FACETRATIO FACETRES FILL FILLET FILLETRAD FILLMODE FILTER FIND FOG FONTALT FONTMAP FROM (Command Modifier) FRONTZ FULLOPEN GFANG GFCLR1 GFCLR2 GFCLRLUM GFCLRSTATE GFNAME GFSHIFT GOTOURL GRAPHSCR Creates unique solid primitives by extruding existing twodimensional objects Controls the aspect ratio of faceting for cylindrical and conic ShapeManager solids Adjusts the smoothness of shaded and rendered objects and objects with hidden lines removed Controls the filling of objects such as hatches, twodimensional solids, and wide polylines Rounds and fillets the edges of objects Stores the current fillet radius Specifies whether hatches (including solid fills and gradient fills), two-dimensional solids, and wide polylines are filled in Creates reusable filters for object selection Finds, replaces, selects, or zooms to specified text Provides visual cues for the apparent distance of objects Specifies the alternate font to be used when the specified font file cannot be located Specifies the font mapping file to be used Locates a point offset from a reference point within a command Stores the front clipping plane offset from the target plane for the current viewport, in drawing units Indicates whether the current drawing is partially open Specifies the angle of a gradient fill Specifies the color for a one-color gradient fill or the first color for a two-color gradient fill Specifies the second color for a two-color gradient fill Makes the color a tint (mixed with white) or a shade (mixed with black) in a one-color gradient fill Specifies whether a gradient fill uses one color or two colors Specifies the pattern of a gradient fill Specifies whether the pattern in a gradient fill is centered or is shifted up and to the left

Opens the file or Web page associated with the hyperlink attached to an object Switches from the text window to the drawing area

GRID GRIDMODE GRIDUNIT GRIPBLOCK GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT GRIPS GRIPSIZE GRIPTIPS GROUP HALOGAP HANDLES HATCH HATCHEDIT HELP HIDE HIDEPRECISION HIDETEXT HIGHLIGHT HLSETTINGS HPANG HPBOUND HPCONFIG HPDOUBLE

Displays a dot grid in the current viewport Specifies whether the grid is turned on or off Specifies the grid spacing (X and Y) for the current viewport Controls the assignment of grips in blocks Controls the color of nonselected grips Controls the color of selected grips Controls the fill color of a grip when the cursor pauses over the grip Suppresses the display of grips when the initial selection set includes more than the specified number of objects. Controls the use of selection set grips for the Stretch, Move, Rotate, Scale, and Mirror Grip modes Sets the size of the grip box in pixels Controls the display of grip tips when the cursor hovers over grips on custom objects that support grip tips Creates and manages saved sets of objects called groups Specifies a gap to be displayed where an object is hidden by another object Reports whether object handles can be accessed by applications Fills an area with a nonassociative hatch pattern Modifies an existing hatch object Displays Help Regenerates a three-dimensional model with hidden lines suppressed Controls the accuracy of hides and shades Specifies whether text objects created by the TEXT, DTEXT, or MTEXT commands are processed during a HIDE command

Controls object highlighting; does not affect objects selected with grips
Changes the display properties of hidden lines Specifies the hatch pattern angle Controls the object type created by the BHATCH and BOUNDARY commands The HPCONFIG command has been discontinued Specifies hatch pattern doubling for user-defined patterns

HPNAME HPSCALE HPSPACE HYPERLINK HYPERLINKBASE HYPERLINKOPTION S ID IMAGE IMAGEADJUST IMAGEATTACH IMAGECLIP IMAGEFRAME IMAGEHLT IMAGEQUALITY IMPORT INDEXCTL INETLOCATION INSBASE INSERT INSERTOBJ INSNAME INSUNITS

Sets a default hatch pattern name of up to 34 characters without spaces Specifies the hatch pattern scale factor, which must be nonzero Specifies the hatch pattern line spacing for user-defined simple patterns, which must be nonzero Attaches a hyperlink to an object or modifies an existing hyperlink Specifies the path used for all relative hyperlinks in the drawing Controls the display of the hyperlink cursor and tooltips Displays the coordinate of a location Manages images Controls the image display of the brightness, contrast, and fade values of images Attaches a new image to the current drawing Creates new clipping boundaries for an image object Controls whether image frames are displayed or hidden from view Controls whether the entire raster image or only the raster image frame is highlighted Controls the display quality of images Imports files in various formats into AutoCAD Controls whether layer and spatial indexes are created and saved in drawing files Stores the Internet location used by the BROWSER command and the Browse the Web dialog box Stores the insertion base point set by BASE, which gets expressed as a UCS coordinate for the current space Places a named block or drawing into the current drawing Inserts a linked or embedded object Sets a default block name for the INSERT command Specifies a drawing-units value for automatic scaling of blocks or images dragged from DesignCenter and inserted into a drawing Sets source content units value

INSUNITSDEFSOUR CE

INSUNITSDEFTARG ET INTERFERE INTERSECT

Sets target drawing units value Creates a composite 3D solid from the common volume of two or more solids Creates composite solids or regions from the intersection of two or more solids or regions and removes the areas outside of the intersection Specifies the color of intersection polylines Specifies the display of intersection polylines Improves the speed of incremental saves, especially for large drawings Determines the amount of wasted space tolerated in a drawing file Specifies the number of contour lines per surface on objects

INTERSECTIONCOL OR INTERSECTIONDISP LAY ISAVEBAK ISAVEPERCENT ISOLINES ISOPLANE JPGOUT JUSTIFYTEXT LASTANGLE LASTPOINT

Specifies the current isometric plane

Saves selected objects to a file in JPEG file format Changes the justification point of selected text objects without changing their locations Stores the end angle of the last arc entered relative to the XY plane of the current UCS for the current space Stores the last point entered, expressed as a UCS coordinate for the current space; referenced by the at symbol (@) during keyboard entry. Stores the last string echoed to the command line Manages layers and layer properties

LASTPROMPT LAYER LAYERP LAYERPMODE LAYOUT LAYOUTREGENCTL LAYOUTWIZARD LAYTRANS LEADER LENGTHEN LENSLENGTH

Undoes the last change or set of changes made to layer settings Turns the tracking of changes made to layer settings on and off
Creates and modifies drawing layout tabs Specifies how the display list is updated in the Model tab and layout tabs Creates a new layout tab and specifies page and plot settings Changes a drawing's layers to layer standards you specify Creates a line that connects annotation to a feature Changes the length of objects and the included angle of arcs Stores the length of the lens (in millimeters) used in

perspective viewing for the current viewport LIGHT LIMCHECK LIMITS LIMMAX LIMMIN LINE LINETYPE LISPINIT Manages lights and lighting effects Controls the creation of objects outside the drawing limits Sets and controls the limits of the drawing boundaries and grid display in the current Model or layout tab Stores the upper-right drawing limits for the current space, expressed as a world coordinate Stores the lower-left drawing limits for the current space, expressed as a world coordinate Creates straight line segments Loads, sets, and modifies linetypes When single-document interface is enabled, specifies whether AutoLISP-defined functions and variables are preserved when you open a new drawing or whether they are valid in the current drawing session only Displays database information for selected objects Makes shapes available for use by the SHAPE command Displays the International Standards Organization (ISO) language code of the current AutoCAD version you're running Stores the full path to the root folder where local customizable files were installed Specifies whether the contents of the text window are written to a log file. Specifies the path and name of the log file for the current drawing Closes the log file opened by LOGFILEON

LIST LOAD LOCALE

LOCALROOTPREFIX LOGFILEMODE LOGFILENAME LOGFILEOFF LOGFILEON LOGFILEPATH LOGINNAME LSLIB LSNEW LTSCALE LTSCALE

Writes the text window contents to a file

Specifies the path for the log files for all drawings in a session Displays the user's name as configured or as input when AutoCAD is loaded Maintains libraries of landscape objects Adds realistic landscape items, such as trees and bushes, to your drawings Sets the global linetype scale factor Sets the global linetype scale factor. The linetype scale factor cannot equal zero

LUNITS LUPREC

Sets linear units Sets the number of decimal places displayed for all read-only linear units, and for all editable linear units whose precision is less than or equal to the current LUPREC value Sets the value for the default lineweight Controls whether the lineweight is displayed Sets the current lineweight, lineweight display options, and lineweight units Controls whether lineweight units are displayed in inches or millimeters Calculates the mass properties of regions or solids Applies the properties of a selected object to other objects Imports and exports materials to and from a library of materials Sets the maximum number of viewports that can be active at one time in a layout Sets the maximum number of symbol names or block names sorted by listing commands Controls the behavior of the third button or wheel on the pointing device Places point objects or blocks at measured intervals on an object Sets the initial drawing units as imperial or metric Sets drawing units as imperial or metric for the current drawing only Loads a menu file Controls the page switching of the screen menu Sets menu echo and prompt control bits Loads partial menu files Stores the menu file name, including the path for the file name Unloads partial menu files Inserts multiple instances of a block in a rectangular array Creates a mirror image copy of objects Creates a mirror image of objects about a plane Controls how the MIRROR command reflects text Edits multiple parallel lines

LWDEFAULT LWDISPLAY LWEIGHT LWUNITS MASSPROP MATCHPROP MATLIB MAXACTVP MAXSORT MBUTTONPAN MEASURE MEASUREINIT MEASUREMENT MENU MENUCTL MENUECHO MENULOAD MENUNAME MENUUNLOAD MINSERT MIRROR MIRROR3D MIRRTEXT MLEDIT

MLINE MLSTYLE MODEL MODEMACRO MOVE MREDO MSLIDE MSPACE MTEXT MTEXTED MTEXTFIXED MTJIGSTRING MULTIPLE MVIEW MVSETUP MYDOCUMENTSPRE FIX NEW NOMUTT

Creates multiple parallel lines Defines a style for multiple parallel lines

Switches from a layout tab to the Model tab

Displays a text string on the status line, such as the name of the current drawing, time/date stamp, or special mod

Displaces objects a specified distance in a specified direction

Reverses the effects of several previous UNDO or U commands

Creates a slide file of the current model viewport or the current layout Switches from paper space to a model space viewport
Creates multiline text Sets the name of the application to use for editing multiline text objects Controls the appearance of the Multiline Text Editor Sets the content of the sample text displayed at the cursor location when the MTEXT command is started

Repeats the next command until canceled

Creates and controls layout viewports

Sets up the specifications of a drawing

Stores the full path to the My Documents folder for the user currently logged-on Creates a new drawing Suppresses the message display (muttering) when it wouldn't normally be suppressed Specifies the color of obscured lines Specifies the linetype of obscured lines The OCECONFIG command has been discontinued Creates concentric circles, parallel lines, and parallel curves Sets the default offset distance Controls how potential gaps between segments are treated when polylines are offset Controls the display of OLE objects in AutoCAD Updates, changes, and cancels existing OLE links Controls the default quality level for embedded OLE objects

OBSCUREDCOLOR OBSCUREDLTYPE OCECONFIG OFFSET OFFSETDIST OFFSETGAPTYPE OLEHIDE OLELINKS OLEQUALITY

OLESCALE OLESTARTUP OOPS OPEN OPTIONS ORTHO ORTHOMODE OSMODE OSNAP OSNAPCOORD PAGESETUP

Controls the size, scale, and other properties of a selected OLE object
Controls whether the source application of an embedded OLE object loads when plotting Restores erased objects Opens an existing drawing file Customizes the AutoCAD settings Constrains cursor movement Constrains cursor movement to the perpendicular Sets running Object Snap modes using the bitcodes Sets running object snap modes Controls whether coordinates entered on the command line override running object snaps

Specifies the plotting device, paper size, and settings for each new layout Controls window transparency.

PALETTEOPAQUE

PAN PAPERUPDATE

Moves the view in the current viewport Controls the display of a warning dialog when attempting to print a layout with a paper size different from the paper size specified by the default for the plotter configuration file

PARTIALOAD PARTIALOPEN PASTEBLOCK PASTECLIP PASTEORIG PASTESPEC PCINWIZARD PDMODE PDSIZE PEDIT PEDITACCEPT

Loads additional geometry into a partially opened drawing

Loads geometry from a selected view or layer into a drawing

Pastes copied objects as a block

Inserts data from the Clipboard

Pastes a copied object in a new drawing using the coordinates from the original drawing
Inserts data from the Clipboard and controls the format of the data Displays a wizard to import PCP and PC2 configuration file plot settings into the Model tab or current layout Controls how point objects are displayed Sets the display size for point objects Edits polylines and three-dimensional polygon meshes Suppresses display of the Object Selected Is Not a Polyline

prompt in PEDIT PELLIPSE PERIMETER PFACE PFACEVMAX PICKADD PICKAUTO PICKBOX PICKDRAG PICKFIRST PICKSTYLE PLAN PLATFORM PLINE PLINEGEN PLINETYPE PLINEWID PLOT PLOTROTMODE PLOTSTAMP PLOTSTYLE PLOTTERMANAGER PLQUIET PNGOUT POINT Controls the ellipse type created with ELLIPSE Stores the last perimeter value computed by the AREA, DBLIST, or LIST commands Creates a three-dimensional polyface mesh vertex by vertex Sets the maximum number of vertices per face Controls whether subsequent selections replace the current selection set or add to it Controls automatic windowing at the Select Objects prompt Sets the object selection target height, in pixels Controls the method of drawing a selection window Controls whether you select objects before (noun-verb selection) or after you issue a command Controls the use of group selection and associative hatch selection Displays the plan view of a specified user coordinate system Indicates which AutoCAD platform is in use Creates two-dimensional polylines Sets how linetype patterns generate around the vertices of a 2D polyline Specifies whether AutoCAD uses optimized 2D polylines Stores the default polyline width Plots a drawing to a plotter, printer, or file Controls the orientation of plots Places a plot stamp on a specified corner of each drawing and logs it to a file Sets the current plot style for new objects or assigns a plot style to selected objects

Displays the Plotter Manager, where you can add or edit a plotter configuration
Controls the display of optional dialog boxes and nonfatal errors for batch plotting and scripts Saves selected objects to a file in a Portable Network Graphics format Creates a point object

POLARADDANG POLARANG POLARDIST POLARMODE POLYGON POLYSIDES POPUPS PREVIEW PRODUCT PROGRAM PROJECTNAME PROJMODE PROPERTIES PROPERTIESCLOSE PROXYGRAPHICS PROXYNOTICE PROXYSHOW PROXYWEBSEARCH PSETUPIN PSLTSCALE PSPACE PSTYLEMODE PSTYLEPOLICY PSVPSCALE PUBLISH

Contains user-defined polar angles Sets the polar angle increment Sets the snap increment when the SNAPTYPE system variable is set to 1 (PolarSnap) Controls settings for polar and object snap tracking Creates an equilateral closed polyline Sets the default number of sides for the POLYGON command Displays the status of the currently configured display driver Shows how the drawing will look when it is plotted Returns the product name Returns the program name Assigns a project name to the current drawing Sets the current Projection mode for trimming or extending

Controls properties of existing objects

Closes the Properties palette Specifies whether images of proxy objects are saved in the drawing Displays a notice when a proxy is created Controls the display of proxy objects in a drawing Specifies whether AutoCAD checks for Object Enablers Imports a user-defined page setup into a new drawing layout Controls paper space linetype scaling Switches from a model space viewport to paper space Indicates whether the current drawing is in a ColorDependent or Named Plot Style mode Controls whether an object's color property is associated with its plot style Sets the view scale factor for all newly created viewports Creates multi-sheet drawing sets for publishing to a single multi-sheet DWF (Design Web Format) file, a plotting device, or a plot file Creates HTML pages that include images of selected drawings Stores the name of the UCS that defines the origin and orientation of orthographic UCS settings in paper space only

PUBLISHTOWEB PUCSBASE

PURGE QDIM QLEADER QNEW QSAVE QSELECT QTEXT QTEXTMODE QUIT RASTERPREVIEW RAY RECOVER RECTANG REDEFINE REDO REDRAW REDRAWALL REFCLOSE REFEDIT REFEDITNAME REFSET REGEN REGENALL REGENAUTO REGENMODE REGION REINIT RE-INIT

Removes unused named items, such as block definitions and layers, from the drawing
Quickly creates a dimension Creates a leader and leader annotation Starts a new drawing with the option of using a default drawing template file

Saves the current drawing using the file format specified in the Options dialog box
Creates a selection set based on filtering criteria

Controls the display and plotting of text and attribute objects

Controls how text is displayed Exits AutoCAD Controls whether BMP preview images are saved with the drawing Creates a semi-infinite line Repairs a damaged drawing Draws a rectangular polyline Restores AutoCAD internal commands overridden by UNDEFINE Reverses the effects of previous UNDO or U commands Refreshes the display in the current viewport Refreshes the display in all viewports Saves back or discards changes made during in-place editing of a reference (an xref or a block) Selects a reference for editing Displays the name of the reference being edited Adds or removes objects from a working set during in-place editing of a reference (an xref or a block)

Regenerates the entire drawing from the current viewport

Regenerates the drawing and refreshes all viewports Controls automatic regeneration of a drawing Controls automatic regeneration of the drawing Converts an object that encloses an area into a region object Reinitializes the digitizer, digitizer input/output port, and program parameters file Reinitializes the digitizer, digitizer port, and acad.pgp file by

using the bitcodes REMEMBERFOLDER S RENAME RENDER RENDSCR REPORTERROR RESUME REVCLOUD REVOLVE REVSURF RMAT RMLIN ROAMABLEROOTPR EFIX ROTATE ROTATE3D RPREF RSCRIPT RTDISPLAY RULESURF SAVE SAVEAS SAVEFILE SAVEFILEPATH SAVEIMG SAVENAME Controls the default path for the Look In or Save In option in standard file selection dialog boxes Changes the names of objects Creates a photorealistic or realistically shaded image of a three-dimensional wireframe or solid model Redisplays the last rendering created with the RENDER command Controls whether an error report can be sent to Autodesk if AutoCAD closes unexpectedly Continues an interrupted script Creates a polyline of sequential arcs to form a cloud shape Creates solids by revolving two-dimensional objects about an axis Creates a revolved surface about a selected axis Manages rendering materials Inserts markups from an RML file into a drawing Stores the full path to the root folder where roamable customizable files were installed Moves objects about a base point

Moves objects about a three-dimensional axis

Sets rendering preferences Repeats a script file Controls the display of raster images during Realtime ZOOM or PAN Creates a ruled surface between two curves Saves the drawing under the current file name or a specified name Saves a copy of the current drawing under a new file name Stores the current automatic save file name Specifies the path to the directory for all automatic save files for the AutoCADsession Saves a rendered image to a file Stores the file name and directory path of the current drawing after you save it

SAVETIME SCALE SCALETEXT SCENE SCREENBOXES SCREENMODE SCREENSIZE SCRIPT SDI SECTION SECURITYOPTIONS SELECT SETIDROPHANDLER SETUV SETVAR SHADEDGE SHADEDIF

Sets the automatic save interval, in minutes

Enlarges or reduces selected objects proportionally in the X, Y, and Z directions Enlarges or reduces selected text objects without changing their locations
Manages scenes in model space Stores the number of boxes in the screen menu area of the drawing area Stores a bitcode indicating the graphics/text state of the AutoCAD display Stores current viewport size in pixels (X and Y) Executes a sequence of commands from a script file Controls whether AutoCADruns in single- or multipledocument interface Uses the intersection of a plane and solids to create a region Controls security settings using the Security Options dialog box

Places selected objects in the Previous selection set

Specifies the default type of i-drop content for the current Autodesk application Maps materials onto objects Lists or changes the values of system variables Controls the shading of edges in rendering Sets the ratio of diffuse reflective light to ambient light in percentage of diffuse reflective light, when SHADEDGE is set to 0 or 1 Controls the display of solid object shading in the current viewport Inserts a shape Accesses operating system commands Controls whether Default, Edit, and Command mode shortcut menus are available in the drawing area Lists the material type and attachment method for a selected object Sets a default shape name that must conform to symbolnaming conventions Displays information about the digital signature attached to a file

SHADEMODE SHAPE SHELL SHORTCUTMENU SHOWMAT SHPNAME SIGVALIDATE

SIGWARN SKETCH SKETCHINC SKETCH SLICE SNAPANG SNAPBASE SNAPISOPAIR SNAPMODE SNAPSTYL SNAPTYPE SNAPUNIT SOLDRAW SOLID SOLIDCHECK SOLIDEDIT SOLPROF SOLVIEW

Controls whether a warning is presented when a file with an attached digital signature is opened Creates a series of freehand line segments Sets the record increment for the SKETCH command Creates a series of freehand line segments

Slices a set of solids with a plane

Sets the snap and grid rotation angle for the current viewport Sets the snap and grid origin point for the current viewport relative to the current UCS Controls the isometric plane for the current viewport Turns the Snap mode on and off Sets the snap style for the current viewport Sets the type of snap for the current viewport Sets the snap spacing for the current viewport Generates profiles and sections in viewports created with SOLVIEW Creates solid-filled triangles and quadrilaterals Turns the solid validation on and off for the current AutoCAD session Edits faces and edges of 3D solid objects Creates profile images of three-dimensional solids Creates floating viewports using orthographic projection to lay out multi- and sectional view drawings of 3D solid and body objects while in a layout Controls the OPTIONS command (from the User Preferences tab) object sort order operations Converts length values between model space and paper space Checks spelling in a drawing Creates a three-dimensional solid sphere Controls the display of splines and spline-fit polylines Creates a nonuniform rational B-spline (NURBS) curve Edits a spline or spline-fit polyline Sets the number of line segments to be generated for each spline-fit polyline generated by the Spline option of the PEDIT command

SORTENTS SPACETRANS SPELL SPHERE SPLFRAME SPLINE SPLINEDIT SPLINESEGS

SPLINETYPE STANDARDS STANDARDSVIOLA TION STARTUP

Sets the type of curve generated by the Spline option of the PEDIT command Manages the association of standards files with AutoCAD drawings Specifies whether a user is notified of standards violations that exist in the current drawing when a non-standard object is created or modified Controls whether the Create New Drawing dialog box is displayed when starting a new drawing with the NEW and QNEW commands

STATS STATUS STLOUT STRETCH STYLE STYLESMANAGER SUBTRACT SURFTAB1 SURFTAB2 SURFTYPE SURFU SURFV SYSCODEPAGE SYSWINDOWS TABLET TABMODE TABSURF TARGET TDCREATE TDINDWG

Displays rendering statistics

Displays drawing statistics, modes, and extents Stores a solid in an ASCII or binary file Moves or stretches objects Creates, modifies, or sets named text styles Displays the Plot Style Manager Combines selected regions or solids by subtraction Sets the number of tabulations to be generated for the RULESURF and TABSURF commands Sets the mesh density in the N direction for the REVSURF and EDGESURF commands Controls the type of surface-fitting to be performed by the Smooth option of the PEDIT command the surface density for PEDIT Smooth in the M direction Sets the surface density for PEDIT Smooth in the N direction Indicates the system code page, which is determined by the operating system Arranges windows and icons Calibrates, configures, and turns on and off an attached digitizing tablet Controls the use of the tablet Creates a tabulated surface from a path curve and a direction vector Stores the location (as a UCS coordinate) of the target point for the current viewport Stores the local time and date the drawing was created Stores the total editing time, which is the total elapsed time

between saves of the current drawing TDUCREATE TDUPDATE TDUSRTIMER TDUUPDATE TEMPPREFIX Stores the universal time and date that the drawing was created Stores the local time and date of the last update/save Stores the user-elapsed timer Stores the universal time and date of the last update/save Contains the directory name (if any) configured for placement of temporary files, with a path separator appended Creates a single-line text object Controls the method of evaluation of text strings entered with the TEXT or -TEXT commands Controls the filling of TrueType fonts while plotting and rendering Sets the resolution tessellation fineness of text outlines for TrueType fonts while plotting and rendering Opens the text window Sets the default height for new text objects drawn with the current text style (has no effect if the style has a fixed height) Sets the name of the current text style Sets the current 3D thickness Saves selected objects to a file in TIFF file format Makes the Model tab or the last layout tab current Displays the date and time statistics of a drawing Creates geometric tolerances Displays, hides, and customizes toolbars Controls the display of tooltips Creates a donut-shaped solid Determines whether the Tool Palettes window is active or not Creates solid lines Sets the default trace width Locates a point from a series of temporary points Controls the display of polar and object snap tracking alignment paths Controls whether background pixels in an image are

TEXT TEXTEVAL TEXTFILL TEXTQLTY TEXTSCR TEXTSIZE TEXTSTYLE THICKNESS TIFOUT TILEMODE TIME TOLERANCE TOOLBAR TOOLTIPS TORUS TPSTATE TRACE TRACEWID TRACKING TRACKPATH TRANSPARENCY

transparent or opaque TRAYICONS TRAYNOTIFY TRAYSETTINGS TRAYTIMEOUT TREEDEPTH TREEMAX TREESTAT TRIM TRIMMODE TSPACEFAC TSPACETYPE TSTACKALIGN TSTACKSIZE U UCS UCSAXISANG UCSBASE UCSFOLLOW UCSICON UCSMAN UCSNAME UCSORG Controls whether a tray is displayed on the status bar Controls whether service notifications are displayed in the status bar tray Controls the display of icons and notifications in the status bar tray Controls the length of time (in seconds) that service notifications are displayed Specifies the maximum depth, that is, the number of times the tree-structured spatial index can divide into branches Limits memory consumption during drawing regeneration by limiting the number of nodes in the spatial index (oct-tree) Displays information about the drawing's current spatial index Trims objects at a cutting edge defined by other objects Controls whether AutoCAD trims selected edges for chamfers and fillets Controls the multiline text line-spacing distance measured as a factor of text height Controls the type of line spacing used in multiline text Controls the vertical alignment of stacked text Controls the percentage of stacked text fraction height relative to selected text's current height Reverses the most recent operation Manages user coordinate systems Stores the default angle when rotating the UCS around one of its axes using the X, Y, or Z options of the UCS command Stores the name of the UCS that defines the origin and orientation of orthographic UCS settings Generates a plan view whenever you change from one UCS to another Controls the visibility and placement of the UCS icon Manages defined user coordinate systems Stores the name of the current coordinate system for the current viewport in the current space Stores the origin point of the current coordinate system for the current viewport in the current space. This value is

always stored as a world coordinate UCSORTHO Determines whether the related orthographic UCS setting is restored automatically when an orthographic view is restored Determines whether the current UCS is saved with a named view Determines whether the UCS in viewports remains fixed or changes to reflect the UCS of the current viewport

UCSVIEW UCSVP UCSXDIR UCSYDIR UNDEFINE UNDO UNDOCTL UNDOMARKS UNION UNITMODE UNITS USERI1, USERI2, USERI3, USERI4, and USERI5

Stores the X direction of the current UCS for the current viewport in the current space
Stores the Y direction of the current UCS for the current viewport in the current space

Allows an application-defined command to override an internal AutoCAD command

Reverses the effect of commands Stores a bitcode indicating the state of the Auto and Control options of the UNDO command Stores the number of marks placed in the UNDO control stream by the Mark option Combines selected regions or solids by addition Controls the display format for units Controls coordinate and angle display formats and precision used for storage and retrieval of integer values

USERR1, USERR2, for storage and retrieval of real numbers USERR3, USERR4, and USERR5 USERS1, USERS2, USERS3, USERS4, and USERS5 VBAIDE VBALOAD VBAMAN VBARUN VBASTMT VBAUNLOAD for storage and retrieval of text string data

Displays the Visual Basic Editor

Loads a global VBA project into the current AutoCAD session

Loads, unloads, saves, creates, embeds, and extracts VBA projects Runs a VBA macro

Executes a VBA statement on the AutoCAD command line Unloads a global VBA project

VIEW VIEWCTR VIEWDIR VIEWMODE VIEWRES VIEWSIZE VIEWTWIST VISRETAIN VLISP VPCLIP VPLAYER VPOINT VPORTS VSLIDE VSMAX VSMIN WBLOCK WEDGE WHIPARC WHIPTHREAD

Saves and restores named views Stores the center of view in the current viewport Stores the viewing direction in the current viewport Stores the View mode for the current viewport using bitcode Sets the resolution for objects in the current viewport Stores the height of the current viewport in drawing units Stores the view twist angle for the current viewport Controls the visibility, color, linetype, lineweight, and plot styles (if PSTYLEPOLICY is set to 0) of xref-dependent layers

Displays the Visual LISP interactive development environment (IDE)

Clips viewport objects Sets layer visibility within viewports Sets the viewing direction for a three-dimensional visualization of the drawing Creates multiple viewports Displays an image slide file in the current viewport Stores the upper-right corner of the current viewport's virtual screen. Expressed as a UCS coordinate Stores the lower-left corner of the current viewport's virtual screen. Expressed as a UCS coordinate Writes objects or a block to a new drawing file Creates a 3D solid with a sloped face tapering along the X axis Controls whether the display of circles and arcs is smooth Controls whether to use an additional processor (known as multithreaded processing) to improve the speed of operations such as ZOOM and PAN that redraw or regenerate the drawing Displays ownership information for opened drawing files Covers existing objects with a blank area Controls whether the background display of AutoCAD objects is transparent in other applications when these objects are [] Controls the assignment of the foreground color of AutoCAD objects in other applications when these objects are [] Imports a Windows metafile

WHOHAS WIPEOUT WMFBKGND

WMFFOREGND WMFIN

WMFOPTS WMFOUT WORLDUCS WORLDVIEW

Sets options for WMFIN Saves objects to a Windows metafile Indicates whether the UCS is the same as the WCS Determines whether input to the 3DORBIT, DVIEW, and VPOINT commands is relative to the WCS (default) or the current UCS Indicates whether a drawing file is read-only or can be written to

WRITESTAT XATTACH XBIND XCLIP XCLIPFRAME XEDIT XFADECTL XLINE XLOADCTL

Attaches an external reference to the current drawing

Binds one or more definitions of named objects in an xref to the current drawing Defines an xref or block clipping boundary and sets the front or back clipping planes Controls the visibility of xref clipping boundaries Controls whether the current drawing can be edited in-place when being referenced by another drawing Controls the fading intensity percentage for references being edited in-place Creates an infinite line Turns xref demand-loading on and off, and controls whether referenced drawing files are opened or copies of referenced drawing files are opened Creates a path for storing temporary copies of demandloaded xref files Creates an infinite line Breaks a compound object into its component objects Controls external references to drawing files Controls whether AutoCAD writes external reference log (XLG) files Controls the notification for updated or missing xrefs Increases or decreases the apparent size of objects in the current viewport Sets the zoomfactor

XLOADPATH XLINE XPLODE XREF XREFCTL XREFNOTIFY ZOOM ZOOMFACTOR