Scribd
Upload
11 views6 pages

Assignment 1

This document is an assignment for a Solid Mechanics course, detailing problems related to structural analysis and stress calculations. It includes tasks such as determining reactions at supports, calculating normal and shearing stresses in various members and pins. The assignment is to be submitted by a specified date and is overseen by Professor Aminreza Noghrehabadi.

Uploaded by

reemo20041234
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views6 pages

Assignment 1

This document is an assignment for a Solid Mechanics course, detailing problems related to structural analysis and stress calculations. It includes tasks such as determining reactions at supports, calculating normal and shearing stresses in various members and pins. The assignment is to be submitted by a specified date and is overseen by Professor Aminreza Noghrehabadi.

Uploaded by

reemo20041234
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Department of Mechanical and Industrial Engineering

Solid Mechanics Assignment 1


Name……………………………………………………………………. Submission Date: 05/02/2025
Student ID……………………………
Instructor: Professor Aminreza Noghrehabadi Score……………….

1- A structure formed by joining members ABC, AD, BE, and DEF with pins is subjected to a
horizontal load P = 30 kN at point A, as shown in Figure. Determine:
 The reactions at supports C and F.
 The axial forces in members AD and BE.
Department of Mechanical and Industrial Engineering
Solid Mechanics Assignment 1
Name……………………………………………………………………. Submission Date: 05/02/2025
Student ID……………………………
Instructor: Professor Aminreza Noghrehabadi Score……………….
Department of Mechanical and Industrial Engineering
Solid Mechanics Assignment 1
Name……………………………………………………………………. Submission Date: 05/02/2025
Student ID……………………………
Instructor: Professor Aminreza Noghrehabadi Score……………….

2- For the frame, calculate:


 The normal stress in member BD for a cross-sectional area 𝐴 = 6 × 10 𝑚 .
 The shearing stress in the pin at A for a diameter of 24 mm in single shear.
Department of Mechanical and Industrial Engineering
Solid Mechanics Assignment 1
Name……………………………………………………………………. Submission Date: 05/02/2025
Student ID……………………………
Instructor: Professor Aminreza Noghrehabadi Score……………….
Department of Mechanical and Industrial Engineering
Solid Mechanics Assignment 1
Name……………………………………………………………………. Submission Date: 05/02/2025
Student ID……………………………
Instructor: Professor Aminreza Noghrehabadi Score……………….

3- The linkage to the aircraft landing gear is schematically depicted in Figure. Calculate the
shearing stresses produced in the pins at A and B. Each pin has a diameter of d = 25 mm.
Each pin is in double shear.
Department of Mechanical and Industrial Engineering
Solid Mechanics Assignment 1
Name……………………………………………………………………. Submission Date: 05/02/2025
Student ID……………………………
Instructor: Professor Aminreza Noghrehabadi Score……………….

You might also like