QUIZ 1 2 Compilation
QUIZ 1 2 Compilation
QUIZ 2
0 : + to -
1: - to +
5. Which line coding scheme below has no DC component
Ans. Unipolar
6. Identify which encoding method does not provide per
synchronization?
Ans. NRZ-L
7. This term describes the difference in the number of
transmitter “low” and the number transmitted “high” in
binary transmission system
Ans. Disparity
8. In the G.890 standard, jitter is defined as phase
variation with frequency components greater than or equal
to 10 Hz.
Ans. False
9. This term is synonymous to the signal rate in a data
communication system. It also refers to the number of
signal/symbol changes that occur per second.
Ans. Baud Rate
10. This normal referred to as mB/nB coding because it
replaces each m-bit group code with an n-bit group code.
Ans. Block Coding
11. Which line coding scheme is best characterized by
the following:
- The positive & negative pulse alternate
- A “1” forces a positive/negative pulse for
half of the bit period
- A “0” does nothing
Ans. Bipolar
12. Which of the schemes below is the best characterized
as having DC component & with self-synchronization for
long 0’s?
Ans. AMI
13. Which of the following line coding diagram is
depictive of an NRZ-L coding scheme?
14. Ans. 0: Positive
1: Negative
15. What is the signal rate for an NRZ coding scheme if
its equivalent manchester to coding has a signal rate for
500 baud?
Ans. 250 baud
16. Which of the following most accurately describes
what type of conversion is performed in line coding?
Ans. Bits to digital signal