Hollow Stem Auger Modifications

Auger Extensions
Auger Extensions are used to compensate for the distance from the ground up to the rig.
To order these extensions please specify:

1. Length: standards are 24, 30, 36, 42, or 48 shoulder to shoulder.

2. Tool Joint: Double Key or Triple Key in Standard or Heavy Duty Tapered
3. Auger I.D. (inside diameter)
4. Flighted or flightless. All flightless augers are made with heavy duty tube.

Laser Slotted Augers

These special hollow stem augers are designed to enable sampling of the ground water as it
flows through the inside of the auger tube. To maintain the integrity and strength of the auger
we use an industrial laser to cut the slots through the auger tube wall. The vertically cut slots are
.0015 wide with the number of slots depending on diameter of the auger.

Heavy Duty Flighting

Our standard flighting is 3/8 (9.5 mm) at the outer edge with hardfacing material applied to the
working edge. Where severe conditions exist we have cobble chasers available which feature
double thick heavy-duty flighting, or any other thickness you desire.

Wide Flighting
Each size auger has a standard flighting size as listed on the catalog sheet. Often there is a
need for wider flighting to drill larger size holes. We will custom manufacture augers to meet your width
specifications.

Flighting Pitch
The pitch on an auger is the distance between the flights. The standard pitch for our augers is listed on
each individual catalog sheet. If you need a different pitch we will be more than happy to make the auger
pitch to whatever dimension you need.

I D of Auger
The I.D. (inside diameter) of the Hollow Stem Augers is considered to be the working area of the auger.
We manufacture to industry standards or we can make any I.D. that you might require.

Auger Length
Our augers are available in a standard industry length of 5 feet but we have manufactured augers up to
40 feet long and metric lengths are available on request.

Special Connections
Other connections are available: Tapered threads, Acker, Diedrich, etc. We also manufacture
extra heavy-duty tool joints for harsh applications.

Special Materials
The standard auger comes with 4142 heat-treated alloy tool joints, mild steel tube and 3/8
(9.5 mm) heavy duty steel flighting with hardfacing on the outer edge. These materials may be
modified to meet special needs. We are able to work with unusual requirements such as non-
magnetic material and corrosion resistant material.

Other Modifications
There are special needs for augers that have yet to be defined. Mills Machine stands ready to satisfy those
needs. We have a full line of augers and have been a leader in the development and design of special
augers for the individual requirements of our customers.

“PLEASE CALL FORCUSTOM OPTIONS AND OTHER ACCESSORIES”

See our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802 0103
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-1
 Auger Cutter Heads and Their Components

Auger Cutter Heads

All cutter heads are available with Double Key or Triple Key, Standard or Heavy Duty, Acker or
Diedrich style tool joints. Auger cutter heads are designed to cut at the gage dimension listed for
each auger size as follows:

Auger ID Size Cutting Diameter

2 1/4 57 mm 6 1/2 165 mm
3 1/4 83 mm 7 1/2 190 mm
3 3/4 95 mm 8 1/4 210 mm
4 1/4 108 mm 8 3/4 222 mm
6 1/4 159 mm 11 279 mm
6 5/8 168 mm 11 1/2 292 mm
7 1/4 184 mm 12 305 mm
8 1/4 210 mm 13 330 mm
10 1/4 260 mm 15 381 mm
12 1/4 451 mm 17 3/4 451 mm

For details on formation capabilities and see the four color bulletin at the front of this catalog
section.

Components for Cutter Heads and Pilot Bits

Component Part # Lbs Kgs

Mini-bullet CMM4 0.2 0.1
Standard Bullet C23 0.4 0.2
Standard Blade, Carbide CO11 1 0.5
Flat Head Screws for Blade 5/8-11 x 1 1/2 CO12 0.2 0.1
Spade Type Blade Cutters, .868 (22.0 mm) C87L 1 0.5
Cutter Block for Mini-bullet CMM4 0.4 0.2
Cutter Block for Standard Bullet C20 0.7 0.3
Cutter Block, Heavy Duty for Standard Bullet C20HD 1.3 0.6
Cutter Block for Spade Type Blade C87B 1 0.5
5-T Square Finger Bit C5T .2 0.1
Square Finger Bit Cutter Block without Flighting C5TB .7 0.3
Square Finger Bit Cutter Block with Flighting C5TBF 1 0.5
Knock out wrench for C23 Bullet C123 4.4 2.0

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

0303 See our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-2
 Auger Pilot Bits and Tool Joints
Auger Pilot Bits
Pilot bits are designed to fit snugly in the center of the auger ID for drilling
without sampling. The pilot bit OD is 1/8 smaller than the auger ID. Designed
to match the auger cutter head style, the pilot bit compliments the cutter head
for smooth, rapid drilling.

Pilot bits may be attached to the center drill rod string, with an additional drill rod connected as each
auger section is connected. For wireline sampling systems, the pilot bit is attached to the lead auger
latching tube and only another auger section is necessary as new depths are reached. The wireline
system is used to remove the pilot bit system and a sampling system inserted as required.

For details on formation capability of each style of pilot bit see the color bulletin in the front of this
section.
Auger Tool Joints

Mills Machine stocks auger tool joints for repair of Mills augers.
We also stock the cutter head connectors for repair or
modification of cutter heads. We will sell a small quantity of an
auger tool joints on an as needed basis. For prices or discussions
on larger volumes please contact your sales representative.

Internal Fishing Tools (Auger Retrievers)

Internal Auger Fishing Tools (Auger Retriever)

Used for recovery of hollow stem augers lost down-hole. Mills stocks the threaded ends and the tool joints to give fast response to your
needs. These tools are for each specific inside diameter of auger and are with left hand thread. Used on both standard and heavy duty-
tapered augers. Non-standard tool joints are readily available.
Some typical Auger Fishing Tools
Fishing Tool Description Size Tool Joint Part #
A. For 2 1/4 (57 mm) or 3 1/4 (83 mm) augers. 2 1/4 2 1/4 DK AFT214DK
Large OD Wicker - 3 3/4(95 mm) 2 1/4 Diedrich Style AFT214DD
Small OD Wicker - 1 3/4 (44 mm) 3 1/4 3 1/4 DK AFT314DK
Thread length - 18 (457 mm) 3 1/4 3 1/4 TK AFT314TK
3 1/4 3 1/4 DK, HD AFT314DKHD
B. For 3 1/4 (83 mm) or 4 1/4 (108 mm) augers. 3 1/4 3 1/4 TK, HD AFT314TKHD
Large OD Wicker - 4 3/4 (121 mm) 3 1/4 Diedrich Style AFT314DD
Small OD Wicker - 2 3/4 (70 mm) 3 1/4 Acker Style AFT314AC
Thread length - 18 (457 mm) 4 1/4 4 1/4 DK AFT414DK
4 1/4 4 1/4 TK AFT414TK
C. For 6 1/4 (159 mm) or 6 5/8 (168 mm) augers. 4 1/4 4 1/4 DK, HD AFT414DKHD
Large OD Wicker - 7 1/4 (184 mm) 4 1/4 4 1/4 TK, HD AFT414TKHD
Small OD Wicker - 5 3/4 (146 mm) 4 1/4 Diedrich Style AFT414DD
Thread Length - 18 (457 mm) 4 1/4 Acker Style AFT414AC
6 1/4 6 1/4 DK AFT614DK
Please call for prices. 6 1/4 6 1/4 DK, HD AFT614DKHD
6 5/8 6 5/8 TK AFT658TK
6 5/8 6 5/8 TK, HD AFT658TKHD
7 1/4 7 1/4 TK AFT714TK

External spiral auger fishing tools available on request.

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802 0303
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-3
Concrete Cutter Bits

Concrete Cutter Bits

The concrete cutter bit has been specially designed to drill through concrete to set manhole covers and give
access to the earth below the concrete. The bits feature our inexpensive field replaceable bullet carbide cutters.
They make a clean round hole with rapid penetration. They are not manufactured to drill below the concrete.
We also, manufacture a complete line of solid face cutter heads to drill through and below the concrete. Our
Concrete Cutter Bits are available in a variety of sizes and tool joint connections with some of our more common
configurations listed below.

Part # Description Number Weight

of Cutters Lbs. Kgs.
ACBB600158HXP 6 Concrete Bullet Bit with 1 5/8 Hex Pin 6
ACBB700314DKP 7 Concrete Bullet Bit with 3 1/4 Auger DK Pin 7
ACBB800414TKP 8 Concrete Bullet Bit with 4 1/4 Auger TK Pin 9
ACBB900414TKPHD 9 Concrete Bullet Bit with 4 1/4 Auger TK HD Pin 10
ACBB1000414DKP 10 Concrete Bullet Bit with 4 1/4 Auger DK Pin 12
ACBB1200614DKP 12 Concrete Bullet Bit with 6 1/4 Auger DK Pin 15
ACBB1400614DKPHD 14 Concrete Bullet Bit with 6 1/4 Auger DK HD Pin 18
ACBB1500658TKP 15 Concrete Bullet Bit with 6 5/8 Auger TK Pin 20
ACBB1600658TKPHD 16 Concrete Bullet Bit with 6 5/8 Auger TK HD Pin 21
ACBB1800814DKP 18 Concrete Bullet Bit with 8 1/4 Auger DK Pin 24
ACBB2000814TKP 20 Concrete Bullet Bit with 8 1/4 Auger TK Pin 30
ACBB22001014TKP 22 Concrete Bullet Bit with 10 1/4 Auger TK Pin 33
ACBB24001214TKP 24 Concrete Bullet Bit with 12 1/4 Auger TK Pin 36

The bits are available with any auger or threaded tool joint. Call your Mills Sales Representative for
specific pricing information.

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

0303 Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-4
 Hollow Stem Auger Accessories
Auger plugs are used to block the ID of the auger when drilling without the Auger Plugs
pilot bit. Plugs may be left in the hole when sampling or the sampling tube
will pass through the flex plug.

High Density Polyethylene

Auger Size Part # Weight
Lbs Kgs
3 1/4 APEP314HD PLHDP314
4 1/4 APEP414HD .5 .2
6 5/8 APEP614 .7 .3
8 1/4 APEP814
Plastic Flex Plug
2 1/4 APFP214 .1 .05
3 1/4 APFP314 .2 .1
4 1/4 APFP414 .3 .1
6 1/4 APFP614 .4 .2
Wooden Plug
2 1/4' APW214 2 .9
3 1/4 APW314 3 1.4
4 1/4 APW414 4 1.8
6 1/4 APW614 5 2.3
6 5/8 APW658 5 2.3
8 1/4 APW614
10 1/4 APW1014
12 1/4 APW1214
Wooden Plug - Heavy Duty
3 1/4 APW314HD 4 1.8
4 1/4 APW414HD 5 2.3

Pulling Plates and Holding Irons

For holding or pulling 1 3/4 OD, 2 3/8 and 2 5/8 OD Drill Rod

Pulling Plate Closed Lbs Kgs

AW and AWJ Rod AHIPPCAW-AWJ 11 5.0
NW and NWJ Rod AHIPPCNW-NWJ 23 23
Pulling Plate Open
AW and AWJ Rod AHIPPOAW-AWJ 9 4.1
NW and NWJ Rod AHIPPONW-NWJ 20 9.1
2 3/8 ID AHIPPO238ID 21 9.5
Holding Iron Closed
AW AHICAW-AWJ 16 7.3
NW AHICNW-NWJ 16 7.3
Holding Iron Open
AW AHIONW-NWJ 13 5.9
NW AHIOAW-AWJ 15 6.8

Hex Extension Rod

These extension rods are used to compensate for the drill base height above the ground or to
extend the drive cap.
Solid Rods 1 5/8 (41.3 mm) Hex Pin to 1 5/8 (41.3 mm) Hex Box - 5' (1524 mm) length. AEXT158-5
Adjustable Rod 1 5/8 (41.3 mm) Hex Pin to 1 5/8 (41.3 mm) Hex Box, AEXT158-2-3
Adjustable from 2' to 3' (610 mm to 914 mm).

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802 0303
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-5
 Hollow Stem Auger Accessories
The hoisting assembly is used to lift the
Auger Hoisting Assembly auger string with the main hoist and
features a heavy-duty wire cable bridal
assembly with two snap on safety hooks.

Hook Weight
Description Part # Capacity Lbs Kgs
2 1/4 (57 mm) Double key, standard duty AHA2142 3 Ton 20 9.1
3 1/4 (83 mm) Double key, standard duty AHA3142 3 Ton 21 9.5
3 1/4 (83 mm) Double key, heavy duty AHA3142HD 3 Ton 21 9.5
3 1/4 (83 mm) Triple key, standard duty AHA3143 3 Ton 21 9.5
3 1/4 (83 mm) Triple key, heavy-duty AHA314HD 3 Ton 21 9.5
4 1/4 (108 mm) Double key, standard duty AHA4142 3 Ton 22 10
4 1/4 (108 mm) Double key, heavy-duty AHA4142HD 3 Ton 22 10
4 1/4 (108 mm) Triple key, standard duty AHA4143 3 Ton 22 10
4 1/4 (108 mm) Triple key, heavy-duty AHA4143TP 3 Ton 22 10
6 1/4 (159 mm) Double key, standard duty AHA6142 3 Ton 27 12.2
6 1/4 (159 mm) Double key, heavy-duty AHA6142TP 3 Ton 27 12.2
6 5/8 (168 mm) Triple key, standard duty AHA6583 3 Ton 28 12.7
6 5/8 (168 mm) Triple key, heavy-duty AHA6583HD 3 Ton 28 12.7
8 1/4 (210 mm) Double key, heavy-duty AHA8142 5 Ton 36 16.3
8 1/4 (210 mm) Triple key, standard-duty AHA8143 5 Ton 36 16.3
10 1/4 (260 mm) Triple key, heavy-duty AHA10143 5 Ton 48 21.8
12 1/4 (311 mm) Triple key, heavy-duty AHA12143 5 Ton 59 26.8

Hoisting Assemblies are available in Acker, Diedrich or other special tool joints.
The removable wire cable assembly may be used for other lifting jobs within the
capacity of the lifting hook.

Auger Forks

These forks are used as temporary support for hollow stem augers.
Description Part # Lbs Kgs
2 1/4 (57 mm) with side handles AFRK2143 6 2.7
3 1/4 (83 mm) with side handles AFRK3143 7 3.2
3 3/4 (95 mm) with side handles AFRK3343 10 4.5
4 1/4 (108 mm) with side handles AFRK4143 10 4.5
4 7/8 (124 mm) with side handles AFRK4873 10 4.5
6 1/4 (159 mm) with side handles AFRK6143 14 6.4
6 5/8 (168 mm) with side handles AFRK6583 14 6.4
8 1/4 (210 mm) with side handles AFRK8143 21 9.5
10 1/4 (260 mm) with side handles AFRK10143 25 11.3
12 1/4 (311 mm) with side handles AFRK12143 38 17.2
Comes

Auger Hook
This hand hook is made to handle all augers - made from 3/4 (19 mm) round bar.
Description Part #
Auger Hook AHO75

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

0303 Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-6
 Hollow Stem Auger Accessories

Pipe Auger Drill Pipe

Auger Drill Pipe is carried in inventory in the following sizes:

Part # Description Weight
Lbs Kgs
AWRD5 AW Rod X 5' 21 9.5
AWRD10 AW Rod X 10' 45 20.4
NWRD5 NW Rod X 5' 31 14.1
NWRD10 NW Rod X 10' 60 27.2
AWJRD5 AWJ Rod X 5' 23 10.4
AWJRD10 AWJ Rod X 10' 49 22.2
NWJRD5 NWJ Rod X 5' 35 15.9
NWJRD10 NWJ Rod X 10’ 68 30.8

Hoist
Hoist Plugs

In addition to the hoisting assembly and auger forks on the

previous page, page 2-5, Mills Machine carries Swivel Hoist
Plugs, Swivel-Hinged Hoist Plugs, Lifting Plugs and Murphy Fast
Plugs. The full line is described in the Pipe handling Tools section
of this catalog. Following are specific plugs we inventory:
Size Swivel Swivel Murphy
Hinged Fast Plug
NW Pin X X
NWJ Pin X X X
AW Pin X X
AWJ Pin X X
NW Box X X
NWJ Box X X
AW Box X X
AWJ Box X X

Hollow Stem Wash

Tee
Used for mud rotary drilling, the hollow stem wash tee has a pipe thread
coupling located on the side of the tube, a 2 NPT on the smaller sizes and a
3 NPT on the larger sizes. Our wash tees have tool joints the same as the
auger string. We can supply special tool joints to meet your specific needs
or lengths as required. The standard length is 18 (457 mm) shoulder to
shoulder with the wash tee 6 (152 mm) below the bottom edge of the top
tool joint.

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802 0303
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956 2-7
Hollow Stem Auger Construction Components - Reference Sheet
Hollow Stem Auger Hardware

Auger Size Qty. Bolt # Qty. Bushing # Qty. Key # Pitch Rod to Cap Bolt
Standard Double Key 2 1/4 (57 mm) 1 ALB2 1 ABN2 2 ADK1 5 Pitch ANAB2
3 1/4 (83 mm) 1 ALB2 1 ABN2 2 ADK1 5 Pitch ANAB3
3 3/4 (95 mm) 1 ALB2 1 ABN2 2 ADK1 5 Pitch ANAB4
4 1/4 (108 mm) 2 ALB2 2 ABN2 2 ADK1 5 Pitch ANAB4
6 1/4 (159 mm) 2 ALB2 2 ABN2 2 ADK1 6 Pitch ANAB6
Heavy Duty - Double Key 3 3/4 (95 mm) 2 ALB3 2 ABN3 2 ADK2 5 Pitch ANAB4
4 1/4 (108 mm) 2 ALB3 2 ABN3 2 ADK2 6 Pitch ANAB4
6 1/4 (159 mm) 2 ALB3 2 ABN3 2 ADK2 6 Pitch ANAB6
8 1/4 (210 mm) 2 ALB3 2 ABN3 2 ADK2 6 Pitch ANAB4
Standard Triple Key 3 1/4 (83 mm) 1 ALB1 1 ABN1 3 ADK1 5 Pitch ANAB3
4 1/4 (108 mm) 2 ALB1 2 ABN1 3 ADK1 5 Pitch ANAB4
6 5/8 (168 mm) 2 ALB1 2 ABN1 3 ADK1 6 Pitch ANAB6
8 1/4 (210 mm) 2 ALB1 2 ABN1M 3 ADK1-S 6 Pitch ANAB4
Heavy Duty - Triple Key 4 1/4 (108 mm) 2 ALB3 2 ABN3 3 ADK2 6 Pitch ANAB4
6 5/8 (168 mm) 2 ALB3 2 ABN3 3 ADK2 6 Pitch ANAB6
10 1/4 (260 mm) 2 ALB4 2 ABN3-M 3 ADK3 7 1/2 Pitch ANAB4
12 1/4 (311 mm) 2 ALB4 2 ABN3-M 3 ADK3 7 1/2 Pitch ANAB4

Auger Cutter Head Hardware

Auger Size Carbide Blade Spade Type Blade Blade-Bullet Combo Spade-Bullet Combo Bullet Cutter 5-T Cutter Head
2 1/4 (57 mm) 2 - C87L Spade Type 2 - C87L Spade Blades 4 - C23 Bullets 4 - C5T Finger Bits
Blades 2 - C87B Blocks 4 - C20 Blocks 2 – C5TBF Cutter
Blocks/Flighting
2 - C87B Blocks 2 -C23 Bullets 2 – ACHF214BU Bullet 2 – CFTB Cutter Blocks
Flights No Flighting
2 -C20 Blocks
3 1/4 (83 mm) 2 - C011 Carbide Blades 3 - C87L Spade 2 - C011 Carbide Blades 2 - C87L Spade Blades 4 - C23 Bullets 4 - C5T Finger Bits
2 - C012 Cap Screws 2 - C012 Cap Screw 2 - C87B Blocks 4 - C20 Blocks 2 – C5TBFCutter.
2 – ACHF314BL Blade Flights 3 - C87B Blocks 2 – ACHF314BL Blade Flights 2 - C23 Bullets 2 – ACHF314BU Bullet Blocks/Flighting
2 - C23 Bullets 2 - C20 Blocks Flights 2 – C5TB Cutter Blocks
2 - C20 Blocks No Flighting
3 3/4 (95 mm) or 3 - C011 Carbide Blades 4 - C87L Spade Type 3 - C011 Carbide Blades 3 - C87L Spade Blades 6 - C23 Bullets 4 - C5T Finger Bits
4 1/4 (108 mm) 3 - C012 Cap Screws Blades 3 - C012 Cap Screw 3 - C87B Blocks 6 - C20 Blocks 2 – C5TBFCutter
Blocks/flighting
3 – ACHF414BL Blade Flights 4 - C87B Blocks 3 – ACHF414BL Blade Flights 3 - C23 Bullets 3 – ACHF414BU Bullet .
3 - C23 Bullets 3 - C20 Blocks Flights 2 – C5TB Cutter Blocks
3 - C-20 Blocks No Flighting
6 1/4 (159 mm) 4 - C011 Carbide Blades 5 - C87L Spade Type 4 - C011 Carbide Blades 4 - C87L Spade Blades 8 - C23 Bullets 4 - C5T Finger Bits
4 - C012 Cap Screws Blades 4 - C012 Cap Screw 4 - C87B Blocks 8 - C20 Blocks 2 – C5TBFCutter
4 – ACHF614BL Blade Flights 5 - C87B Blocks 4 – ACHF614BL Blade Flights 4 - C23 Bullets 4 – ACHF614BU Bullet Blocks/Flighting.
4 - C23 Bullets 4 - C20 Blocks Flights 2 – C5TB Cutter
4 - C20 Blocks Blocks/no Flighting
6 5/8 (168 mm) 4 - C011 Carbide Blades 5 - C87L Spade Type 4 - C011 Carbide Blades 4 - C87L Spade Blades 8 - C23 Bullets 6 - C5T Finger Bits
4 - C012 Cap Screws Blades 4 - C012 Cap Screw 4 - C87B Blocks 8 - C20 Blocks 3 – C5TBF Cutter
Blocks/Flt.
4 – ACHF658BL Blade Flights 5 - C87B Blocks 4 – ACHF658BL Blade Flights 4 - C23 Bullets 4 – ACHF658BU Bullet 3 – C5TB Cutter Blocks
4 - C23 Bullets 4 - C20 Blocks Flights No Flighting
4 - C20 Blocks 8 - Bit Available
8 1/4 (210 mm) 5 - C011 Carbide Blades 5 - C87L Spade Type 5 - C011 Carbide Blades 4 – C87L Spade Blades 10 - C23 Bullets 6 - C5T Finger Bits
5 - C012 Cap Screws Blades 5 - C012 Cap Screw 4 - C87B Blocks 10 - M20 Blocks 3 – C5TBF Cutter
Blocks/Flighting
5 – ACHF814BL Blade Flights 5 - C87B Blocks 5 – ACHF814BL Blade Flights 4 - C23 Bullets 5 – ACHF814BU Bullet 3 – C5TB Cutter Blocks
5 - C23 Bullets 4 - C20 Blocks Flights No Flighting
5 - C20 Blocks 8 - Bit Available
10 1/4 (260 mm) 6 - C011 Carbide Blades 8 - C87L Spade Type 6 - C011 Carbide Blades 5 - C87L Spade Blades 10 - C23 Bullets
6 - C012 Cap Screws Blades 6 - C012 Cap Screw 5 - C87B Blocks 10 - C20 Blocks
6 – ACHF1014BL Blade 8 - C87B Blocks 6 - ACHF1014BL Blade Flights 5 - C23 Bullets 5 – ACHF1014BU
Flights 6 - C23 Bullets 5 - C20 Blocks Bullet Flights
6 - C20 Blocks
12 1/4 (311 mm) 7 - C011 Carbide Blades 10 - MMC87L Spade Type 7 -CC011 Carbide Blades 6 - 87L Spade Blades 12 -CC23 Bullets
7 - C012 Cap Screws Blades 7 - C012 Cap Screw 6 - 87B Blocks 12 -CC20 Blocks
7 – ACHF1214BL Blade 10 - MMC87B Blocks 7 – ACHF1214BL Blade Flights 6 -CC23 Bullets 6 – ACHF1214BU
Flights 7 -C23 Bullets 6 - C20 Blocks Bullet Flights
7 - C20 Blocks

Pilot Bit Hardware

Auger Size
3 1/4 (83 mm) 3 3/4 (95 mm) or 6 1/4 (159 mm) 6 5/8 (168 mm) 8 1/4 (210 mm) 10 1/4 (260 mm) 12 1/4 (311 mm)
4 1/4 (108 mm)
Bullet 3-CMM4 Bullets 3-C23 Bullets 6-C23 Bullets 6-C23 Bullets 8-C23 Bullets 10-C23 Bullets 12-C23 Bullets
3-CMM4B Blocks 3-C20 Blocks 6-C20 Blocks 6-C20 Blocks 8-C20 Blocks 10-C20 Blocks 12-C20 Blocks
Spade 2-C87L Spaded 4-87L Spade 4-C87L Spaded 6-C87L Spade 8-C87L Spade 10-C87L Spade
2-C87B Blocks 4-C87B Blocks 4-C87B Blocks 6-C87B Blocks 8-C87B Blocks 10-C 87B Blocks

“PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

0303 Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-8
 “PLEASE CALL FOR CUSTOM OPTIONS AND OTHER ACCESSORIES”

0303 Check our Web site: MILLS MACHINE CO. INC., P O BOX 1514, SHAWNEE, OK, 74802
www.MillsMachine.com Phone: 800-654-2703 or 405-273-4900 Fax: 405-273-4956
2-8