Scribd
Upload
8 views1 page

Assignment 1 PSED Lab

The document outlines an assignment for a MATLAB program focused on calculating the Geometric Mean Radius of Line (GMRL) and Geometric Mean Radius of Conductor (GMRC) for composite and bundle conductors. It also includes tasks for determining line constants L and C for overhead 3-phase transmission lines under various configurations and arrangements. Additionally, it specifies a practical example involving a double circuit 3-phase transmission line with ACSR conductors, requiring calculations of inductance and capacitance per phase per kilometer.

Uploaded by

anshijain0306
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views1 page

Assignment 1 PSED Lab

The document outlines an assignment for a MATLAB program focused on calculating the Geometric Mean Radius of Line (GMRL) and Geometric Mean Radius of Conductor (GMRC) for composite and bundle conductors. It also includes tasks for determining line constants L and C for overhead 3-phase transmission lines under various configurations and arrangements. Additionally, it specifies a practical example involving a double circuit 3-phase transmission line with ACSR conductors, requiring calculations of inductance and capacitance per phase per kilometer.

Uploaded by

anshijain0306
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PSED Lab (VI Sem.

Assignment 1
Develop program in MATLAB to determine

1. GMRL and GMRC for a composite conductor having 7 identical strands of radius 'r'
each.

2. GMRL and GMRC of bundle conductor having bundle spacing of 'd' having total
number of conductor 2, 3 (equilateral triangle configuration) or 4 (square configuration)
each of radius 'r'.

3. Develop program in MATLAB to determine line constants L and C for an overhead 3-


phase general transmission line considering following options:
I. Type of conductor
1. Single conductor
2. Bundle conductor (with configuration)
II. Number of Three phase circuits
1. Single circuit
2. Double circuit vertical configuration
3. Double circuit Horizontal configuration
III. For double circuit configuration - the circuit arrangement
1. abc-c'b'a'
2. abc-a'b'c'
IV. Whether the line is transposed or not

4. A double circuit 3 phase transmission line is composed of two ACSR, 2,16,7000-cmil,


72/7 Kiwi conductor per phase with vertical configuration as shown in the figure. the
conductor have the diameter of 4.4069 cm and a GMR of 1.7374 cm. The bundle spacing
is 45 cm. Find the inductance and capacitance per phase per kilometer of the line and
verify the result using MATLAB program developed in Ex. 3, if the line is untransposed.
Neglect the effect of earth.
(cmil-A circular mil is a unit of area, equal to the area of a circle with a diameter of one
mil (one thousandth of an inch).

You might also like