Scribd
Upload
260 views8 pages

Drawing - Design pp1 Form 4

This document is an examination paper for the Kenya Certificate of Secondary Education (K.C.S.E) in Drawing & Design, specifically Paper 1, for Form Four students. It includes instructions for candidates, various sections with questions related to drawing techniques, materials, and design principles, as well as practical drawing tasks. The exam is structured to assess knowledge in industrial training, metal classification, drawing conventions, and the application of scales in design.

Uploaded by

vngerecha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
260 views8 pages

Drawing - Design pp1 Form 4

This document is an examination paper for the Kenya Certificate of Secondary Education (K.C.S.E) in Drawing & Design, specifically Paper 1, for Form Four students. It includes instructions for candidates, various sections with questions related to drawing techniques, materials, and design principles, as well as practical drawing tasks. The exam is structured to assess knowledge in industrial training, metal classification, drawing conventions, and the application of scales in design.

Uploaded by

vngerecha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

NAME…………………………………………….………..INDEX NO………….….....................

………
SCHOOL………………………………………………..CANDIDATES SIGN…………....................….
DATE…………………......................………
449/1
DRAWING & DESIGN
PAPER 1
TIME: 2 ½ HOURS
AUGUST-2022

CEKENAS END OF TERM TWO EXAM-2022


FORM FOUR EXAM
Kenya Certificate of Secondary Education. (K.C.S.E)
DRAWING & DESIGN
PAPER 1
449/1

INSTRUCTIONS TO CANDIDATES
1. Write your name and index number in the spaces provided above
2. Sign and write date of examination in the space provided.
3. Answer ALL questions in this paper.
4. Candidates should check the question paper to ensure that all pages are printed as indicated
and no questions are missing.
5. Answer all questions in English.

CEKENA2022 FM4 1 Drawing & Design 449/1 Turn Over


Section A
1. a. State what an industrial training centre in Kenya is. (lmk)
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
b. State two factors to consider in order to produce quality drawing. (2mks)
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
c. State four ways through which design ideas are communicated (2mks)
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
2. State two classification of metals and to each case give an example. (2mks)
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
3. Give reasons for each of the following cases. (4mks)
a) Set squares are made of plastics
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
b) Drawing board are made of block board.
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
4. State the reasons why manufactured board were introduced into the wood industries. (3mks)
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....

CEKENA2022 FM4 2 Drawing & Design 449/1 Turn Over


5. With the aid of sketches explain two (2) methods of obtaining veneers from logs. (6mks)

6. Sketch the following types of wood joints. (4mks)


a) Dovetail joint

b) Dowelled joint

CEKENA2022 FM4 3 Drawing & Design 449/1 Turn Over


7. a. Sketch the conventions for each of the following: (4mks)
i. Circular tube

ii. Planed timber

iii. Switch

iv. Knurling

CEKENA2022 FM4 4 Drawing & Design 449/1 Turn Over


b. Give the composition of the each of the following alloys: (2mks)
i. Brass
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
ii. Stainless steel
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
8. Explain each of the following scales in relation to the size of the drawing and the actual object. Give a
common example where each of the below scales would be used. (4mks)
i. 20:1
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
ii. 1:20
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
…………………………………………………………………………………………………………….....
9. The figure below shows a pictorial view of a machined block. Draw FULL SIZE in first angle
projection, the three orthographic views of the block. (9mks)

CEKENA2022 FM4 5 Drawing & Design 449/1 Turn Over


10. The figure below shows three views drawn in third angle projections. Make an isometric drawing
from the three views. (7mks)

CEKENA2022 FM4 6 Drawing & Design 449/1 Turn Over


SECTION B (20MKS)
Question 11 compulsory
It should be answered on the A3 paper provided.
11 Figure 6 shows parts of a tool post drawn in first angle projection Assemb1c the parts and draw full
size the following views in third angle projection:
(a) Sectional front elevation along the cutting plane X—X,
(b) Plan.
Insert four leading dimensions and do not show hidden details. (20 marks)

Section C
11. A wheel 72mm diameter is rolled on the outside of a large wheel 190mm diameter and after one
revolution it is turned to roll on the inside of the same large wheel. Draw the locus of a point on the
circumference of the small wheel as it rolls on both surface. (l5mks)
12. The figure below shows three views of a bracket in first angle projection. Draw the full size the
oblique view of the bracket with X-X as the lowest edge. (l5mks)

CEKENA2022 FM4 7 Drawing & Design 449/1 Turn Over


13. The figure below shows the intersection of two pieces of equal diameter at 45°. (l5mks)
Copy the given views
Complete the plan
Draw the surface development of the branch pipe labelled A

CEKENA2022 FM4 8 Drawing & Design 449/1 Turn Over

You might also like