7:57:53 AM [INFORMATION] Initialising A1 Evo Nexus Finale ...

7:57:54 AM [INFORMATION] Audyssey calibration 'Dec 26,2024 3 positions Mobile.ady' has

been uploaded!
7:57:54 AM [INFORMATION] Speed of sound setting has been automatically adjusted for your
Marantz AV8805 at 300 m/s.
7:57:56 AM [WARNING!] Unable to detect REW!
7:57:56 AM [WARNING!] No measurements found. Retrying in 2 seconds...
7:58:00 AM [WARNING!] Unable to detect REW!
7:58:00 AM [WARNING!] No measurements found. Retrying in 3 seconds...
7:58:06 AM [WARNING!] Unable to detect REW!
7:58:06 AM [WARNING!] No measurements found. Retrying in 0 seconds...
7:58:06 AM [WARNING!] Unable to detect REW!
7:58:06 AM [WARNING!] No measurements found. Retrying in 1 seconds...
7:58:08 AM [INFORMATION] Comparing REW measurements with the uploaded calibration
file...
7:58:08 AM [INFORMATION] All speaker checks passed. Proceeding with subwoofer(s)
check...
7:58:08 AM [INFORMATION] Subwoofer count consistency checks passed!
7:58:25 AM [IMPORTANT] Optimization started...
7:58:25 AM [WARNING!] Please keep REW on 'SPL & Phase' tab, close any child windows and
stay on this web page until optimization is completed!
7:58:25 AM [INFORMATION] Checking and sorting measurements in REW...
7:58:31 AM [INFORMATION] Measurements in REW are consistent and have been
successfully sorted.
7:58:49 AM [INFORMATION] Enforcing REW defaults to all measurements / Removing
Audyssey Reference High Frequency Roll Off 1 (15/15)
7:58:51 AM [IMPORTANT] Active custom target curve: D:Target Curves.txt
7:58:51 AM [INFORMATION] Integrity checks completed successfully. Running Room EQ
Wizard version 5.40 Beta 63 API 0.7.1
7:59:31 AM [INFORMATION] Proprietary cross correlation of 'filtered excess phase' based
impulse alignment timing adjustments completed!
7:58:52 AM [IMPORTANT] Target level optimized for minimum total volume step deviation per
speaker and maximum overall adjustment flexibility: 125.33dB
7:59:31 AM [WARNING!] Your system will now be converted to 'standard bass' mode for a
better bass experience with movies...
7:59:31 AM [INFORMATION] Matching subwoofer volumes...
7:59:31 AM [INFORMATION] Subwoofer #1:
7:59:32 AM [INFORMATION] Aligning subwoofer volume to best track the target curve
between 30Hz - 80Hz (Dolby standard)...
7:59:32 AM [IMPORTANT] Subwoofer - target adjustment: 2dB.
7:59:34 AM [INFORMATION] Calculated natural lowpass filter frequency: 250Hz
7:59:35 AM [INFORMATION] Subwoofer #2:
7:59:35 AM [INFORMATION] Aligning subwoofer volume to best track the target curve
between 30Hz - 80Hz (Dolby standard)...
7:59:35 AM [IMPORTANT] Subwoofer - target adjustment: 2dB.
7:59:37 AM [INFORMATION] Calculated natural lowpass filter frequency: 250Hz
7:59:38 AM [INFORMATION] Aligning multiple subs between each other for best bass
performance...
7:59:47 AM [INFORMATION] Skipping potential alignment @ 203Hz - required delay is
outside limits by 0ms
7:59:50 AM [INFORMATION] Possible alignment: @243Hz, 138.1141750586294dB,
isInverted: false, required delay: 0.00ms
7:59:50 AM [INFORMATION] Sub array: [0,1]
8:00:00 AM [INFORMATION] Skipping potential alignment @ 203Hz - required delay is
outside limits by 0ms
8:00:02 AM [INFORMATION] Possible alignment: @243Hz, 138.1141750586294dB,
isInverted: false, required delay: 0.00ms
8:00:02 AM [INFORMATION] Sub array: [1,0]
8:00:03 AM [INFORMATION] Configuration #1 average bass region excess phase:
72.90390133491938°
8:00:03 AM [INFORMATION] Configuration #2 average bass region excess phase:
72.90390133491938°
8:00:03 AM [INFORMATION] Optimal selection: Configuration #1 [0,1] with 72.90° average
excess phase.
8:00:04 AM [WARNING!] Time and volume aLignment of subwoofers between each other in
'standard bass' mode completed.
8:00:04 AM [INFORMATION] No distance value was found for speaker C in the calibration file
and it's been temporarily set to 2.75 meters.
8:00:04 AM [IMPORTANT] Available bass system volume adjustment range → -12dB : 10dB
8:00:04 AM [IMPORTANT] Total 'delay headroom' available to subwoofer after maxing out all
tweaks → 33.1683944385205ms
8:00:04 AM [IMPORTANT] C - applied adjustment: -5dB
8:00:04 AM [IMPORTANT] FL - applied adjustment: -8.5dB
8:00:04 AM [IMPORTANT] FR - applied adjustment: -9dB
8:00:04 AM [IMPORTANT] RHL - applied adjustment: 6dB
8:00:04 AM [IMPORTANT] RHR - applied adjustment: 6dB
8:00:04 AM [IMPORTANT] SBL - applied adjustment: 1dB
8:00:04 AM [IMPORTANT] SBR - applied adjustment: 1dB
8:00:04 AM [IMPORTANT] SLA - applied adjustment: 1.5dB
8:00:04 AM [IMPORTANT] SRA - applied adjustment: 0.5dB
8:00:04 AM [IMPORTANT] TML - applied adjustment: 6.5dB
8:00:04 AM [IMPORTANT] TMR - applied adjustment: 7dB
8:00:04 AM [IMPORTANT] FHL - applied adjustment: 9dB
8:00:04 AM [IMPORTANT] FHR - applied adjustment: 9.5dB
8:00:04 AM [INFORMATION] Aligning subwoofer volume to best track the target curve
between 30Hz - 80Hz (Dolby standard)...
8:00:04 AM [IMPORTANT] Subwoofer - target adjustment: -6.5dB.
8:00:04 AM [INFORMATION] Generating proprietary room correction filters based on Hilbert
transforms of the impulse responses...
8:01:06 AM [IMPORTANT] Your bass management system is expected to measure flat down to
27.10 ± 0.18 Hz!
8:01:07 AM [IMPORTANT] Calculating 'steady state' roll off frequencies based on 12dB/octave
Butterworth high-pass filter slopes (receiver spec.)...
8:01:38 AM [INFORMATION] Speaker C: 60Hz
8:01:38 AM [INFORMATION] Speaker FL: 'Large/Full range'
8:01:38 AM [INFORMATION] Speaker FR: 40Hz
8:01:38 AM [INFORMATION] Speaker RHL: 120Hz
8:01:38 AM [INFORMATION] Speaker RHR: 100Hz
8:01:38 AM [INFORMATION] Speaker SBL: 120Hz
8:01:38 AM [INFORMATION] Speaker SBR: 110Hz
8:01:38 AM [INFORMATION] Speaker SLA: 80Hz
8:01:38 AM [INFORMATION] Speaker SRA: 80Hz
8:01:38 AM [INFORMATION] Speaker TML: 90Hz
8:01:38 AM [INFORMATION] Speaker TMR: 80Hz
8:01:38 AM [INFORMATION] Speaker FHL: 90Hz
8:01:38 AM [INFORMATION] Speaker FHR: 80Hz
8:01:40 AM [IMPORTANT] Calculated subwoofer(s) natural lowpass filter roll off frequency:
8:01:43 AM [IMPORTANT] 250Hz
8:01:44 AM [INFORMATION] Analysing 'Large / Full range' front main speakers in 'Subwoofer
Mode: LFE' setting:
8:01:44 AM [INFORMATION] Expected dip removal efficiency: 91.90%
8:01:44 AM [INFORMATION] Analysing 'Large / Full range' front main speakers in 'Subwoofer
Mode: LFE + Main' setting:
8:01:46 AM [INFORMATION] Skipping potential alignment at 33Hz - required delay is outside
limits by 6ms
8:02:00 AM [INFORMATION] Sub LPF frequency: 40Hz, required delay: 0.36ms, expected dip
removal efficiency: 92.66%
8:02:05 AM [INFORMATION] Skipping potential alignment at 91Hz - required delay is outside
limits by 9ms
8:02:15 AM [INFORMATION] Sub LPF frequency: 60Hz, required delay: 0.05ms, expected dip
removal efficiency: 92.85%
8:02:23 AM [INFORMATION] Skipping potential alignment at 127Hz - required delay is
outside limits by 3ms
8:02:31 AM [INFORMATION] Sub LPF frequency: 80Hz, required delay: 0.01ms, expected dip
removal efficiency: 92.88%
8:02:39 AM [INFORMATION] Skipping potential alignment at 136Hz - required delay is
outside limits by 4ms
8:02:46 AM [INFORMATION] Sub LPF frequency: 90Hz, required delay: 0.26ms, expected dip
removal efficiency: 92.90%
8:02:55 AM [INFORMATION] Skipping potential alignment at 144Hz - required delay is
outside limits by 2ms
8:03:02 AM [INFORMATION] Sub LPF frequency: 100Hz, required delay: 0.51ms, expected
dip removal efficiency: 92.95%
8:03:11 AM [INFORMATION] Skipping potential alignment at 150Hz - required delay is
outside limits by 6ms
8:03:17 AM [INFORMATION] Sub LPF frequency: 110Hz, required delay: 0.76ms, expected
dip removal efficiency: 93.03%
8:03:27 AM [INFORMATION] Skipping potential alignment at 158Hz - required delay is
outside limits by 2ms
8:03:33 AM [INFORMATION] Sub LPF frequency: 120Hz, required delay: 1.05ms, expected
dip removal efficiency: 93.12%
8:03:34 AM [INFORMATION] Deep searching alignment options...
8:03:48 AM [INFORMATION] Sub LPF frequency: 150Hz, required delay: 2.01ms, expected
dip removal efficiency: 93.39%
8:03:50 AM [INFORMATION] Deep searching alignment options...
8:04:04 AM [INFORMATION] Sub LPF frequency: 180Hz, required delay: 2.68ms, expected
dip removal efficiency: 93.67%
8:04:05 AM [INFORMATION] Deep searching alignment options...
8:04:20 AM [INFORMATION] Sub LPF frequency: 200Hz, required delay: 2.95ms, expected
dip removal efficiency: 93.85%
8:04:27 AM [INFORMATION] Skipping potential alignment at 116Hz - required delay is
outside limits by 1ms
8:04:36 AM [INFORMATION] Sub LPF frequency: 250Hz, required delay: 3.47ms, expected
dip removal efficiency: 94.24%
8:04:36 AM [INFORMATION] Large / Full range speakers 'LFE + Main' mode, subwoofer lpf:
250Hz, expected dip removal efficiency: 94.24%
8:04:36 AM [INFORMATION] Analysis of Front mains set as 'Small' speakers:
8:04:38 AM [INFORMATION] Deep searching alignment options...
8:04:53 AM [INFORMATION] Crossover frequency: 40Hz, required delay: 3.37ms (subwoofer
polarity inverted) , expected dip removal efficiency: 92.35%
8:04:56 AM [INFORMATION] Deep searching alignment options...
8:05:10 AM [INFORMATION] Crossover frequency: 60Hz, required delay: 3.47ms (subwoofer
polarity inverted) , expected dip removal efficiency: 92.25%
8:05:13 AM [INFORMATION] Deep searching alignment options...
8:05:28 AM [INFORMATION] Crossover frequency: 80Hz, required delay: 3.39ms (subwoofer
polarity inverted) , expected dip removal efficiency: 92.00%
8:05:31 AM [INFORMATION] Deep searching alignment options...
8:05:46 AM [INFORMATION] Crossover frequency: 90Hz, required delay: 3.28ms (subwoofer
polarity inverted) , expected dip removal efficiency: 91.85%
8:05:49 AM [INFORMATION] Deep searching alignment options...
8:06:03 AM [INFORMATION] Crossover frequency: 100Hz, required delay: 3.1ms (subwoofer
polarity inverted) , expected dip removal efficiency: 91.75%
8:06:06 AM [INFORMATION] Deep searching alignment options...
8:06:21 AM [INFORMATION] Crossover frequency: 110Hz, required delay: 3.14ms (subwoofer
polarity inverted) , expected dip removal efficiency: 91.71%
8:06:28 AM [INFORMATION] Skipping potential alignment at 84Hz - required delay is outside
limits by 8ms
8:06:39 AM [INFORMATION] Crossover frequency: 120Hz, required delay: 3.26ms (subwoofer
polarity inverted) , expected dip removal efficiency: 91.68%
8:06:39 AM [IMPORTANT] Selected optimal set up:
8:06:39 AM [WARNING!] Front speakers will be set to 'Large / Full range', set 'Subwoofer
Mode' to 'LFE + Main', set 'bass extraction lpf' to 250Hz in the AVR
8:06:40 AM [IMPORTANT] Final speaker and subwoofer distances:
8:06:40 AM [IMPORTANT] C: 2.75 meters
8:06:40 AM [IMPORTANT] FL: 2.94 meters
8:06:40 AM [IMPORTANT] FR: 2.93 meters
8:06:40 AM [IMPORTANT] RHL: 2.19 meters
8:06:40 AM [IMPORTANT] RHR: 2.20 meters
8:06:40 AM [IMPORTANT] SBL: 0.99 meters
8:06:40 AM [IMPORTANT] SBR: 1.04 meters
8:06:40 AM [IMPORTANT] SLA: 1.57 meters
8:06:40 AM [IMPORTANT] SRA: 1.58 meters
8:06:40 AM [IMPORTANT] TML: 2.40 meters
8:06:40 AM [IMPORTANT] TMR: 2.38 meters
8:06:40 AM [IMPORTANT] FHL: 3.02 meters
8:06:40 AM [IMPORTANT] FHR: 3.04 meters
8:06:40 AM [WARNING!] SW1: 5.95 meters, keep this subwoofer's polarity AS IS!
8:06:40 AM [WARNING!] SW2: 5.95 meters, keep this subwoofer's polarity AS IS!
8:06:40 AM [INFORMATION] Optimizing crossover frequencies for the remaining speakers:
8:06:40 AM [INFORMATION] Speaker: C set to 'Small':
8:06:43 AM [INFORMATION] Crossover frequency: 60Hz, expected dip removal efficiency:
95.34%
8:06:47 AM [INFORMATION] Crossover frequency: 80Hz, expected dip removal efficiency:
95.47%
8:06:51 AM [INFORMATION] Crossover frequency: 90Hz, expected dip removal efficiency:
95.39%
8:06:55 AM [INFORMATION] Crossover frequency: 100Hz, expected dip removal efficiency:
95.21%
8:06:59 AM [INFORMATION] Crossover frequency: 110Hz, expected dip removal efficiency:
94.96%
8:07:03 AM [INFORMATION] Crossover frequency: 120Hz, expected dip removal efficiency:
94.63%
8:07:04 AM [INFORMATION] Speaker pair: RHL & RHR set to 'Small':
8:07:07 AM [INFORMATION] Crossover frequency: 100Hz, expected dip removal efficiency:
93.44%
8:07:11 AM [INFORMATION] Crossover frequency: 110Hz, expected dip removal efficiency:
93.42%
8:07:15 AM [INFORMATION] Crossover frequency: 120Hz, expected dip removal efficiency:
93.30%
8:07:19 AM [INFORMATION] Crossover frequency: 150Hz, expected dip removal efficiency:
93.27%
8:07:21 AM [INFORMATION] Speaker pair: SBL & SBR set to 'Small':
8:07:24 AM [INFORMATION] Crossover frequency: 110Hz, expected dip removal efficiency:
94.65%
8:07:28 AM [INFORMATION] Crossover frequency: 120Hz, expected dip removal efficiency:
94.68%
8:07:32 AM [INFORMATION] Crossover frequency: 150Hz, expected dip removal efficiency:
94.65%
8:07:33 AM [INFORMATION] Speaker pair: SLA & SRA set to 'Small':
8:07:37 AM [INFORMATION] Crossover frequency: 80Hz, expected dip removal efficiency:
96.57%
8:07:40 AM [INFORMATION] Crossover frequency: 90Hz, expected dip removal efficiency:
96.43%
8:07:44 AM [INFORMATION] Crossover frequency: 100Hz, expected dip removal efficiency:
96.30%
8:07:47 AM [INFORMATION] Crossover frequency: 110Hz, expected dip removal efficiency:
96.15%
8:07:51 AM [INFORMATION] Crossover frequency: 120Hz, expected dip removal efficiency:
95.97%
8:07:52 AM [INFORMATION] Speaker pair: TML & TMR set to 'Small':
8:07:55 AM [INFORMATION] Crossover frequency: 80Hz, expected dip removal efficiency:
96.10%
8:07:59 AM [INFORMATION] Crossover frequency: 90Hz, expected dip removal efficiency:
95.96%
8:08:02 AM [INFORMATION] Crossover frequency: 100Hz, expected dip removal efficiency:
95.77%
8:08:06 AM [INFORMATION] Crossover frequency: 110Hz, expected dip removal efficiency:
95.57%
8:08:09 AM [INFORMATION] Crossover frequency: 120Hz, expected dip removal efficiency:
95.42%
8:08:13 AM [INFORMATION] Crossover frequency: 150Hz, expected dip removal efficiency:
95.07%
8:08:14 AM [INFORMATION] Speaker pair: FHL & FHR set to 'Small':
8:08:17 AM [INFORMATION] Crossover frequency: 80Hz, expected dip removal efficiency:
94.06%
8:08:20 AM [INFORMATION] Crossover frequency: 90Hz, expected dip removal efficiency:
93.85%
8:08:24 AM [INFORMATION] Crossover frequency: 100Hz, expected dip removal efficiency:
93.69%
8:08:27 AM [INFORMATION] Crossover frequency: 110Hz, expected dip removal efficiency:
93.67%
8:08:31 AM [INFORMATION] Crossover frequency: 120Hz, expected dip removal efficiency:
93.69%
8:08:34 AM [INFORMATION] Crossover frequency: 150Hz, expected dip removal efficiency:
93.90%
8:08:35 AM [IMPORTANT] Final crossover frequencies will automatically be set as follows:
8:08:35 AM [IMPORTANT] Speaker C: 80Hz
8:08:35 AM [IMPORTANT] Speaker FL: 'Large / Full range'
8:08:35 AM [IMPORTANT] Speaker FR: 'Large / Full range'
8:08:35 AM [IMPORTANT] Speaker RHL: 100Hz
8:08:35 AM [IMPORTANT] Speaker RHR: 100Hz
8:08:35 AM [IMPORTANT] Speaker SBL: 120Hz
8:08:35 AM [IMPORTANT] Speaker SBR: 120Hz
8:08:35 AM [IMPORTANT] Speaker SLA: 80Hz
8:08:35 AM [IMPORTANT] Speaker SRA: 80Hz
8:08:35 AM [IMPORTANT] Speaker TML: 80Hz
8:08:35 AM [IMPORTANT] Speaker TMR: 80Hz
8:08:35 AM [IMPORTANT] Speaker FHL: 80Hz
8:08:35 AM [IMPORTANT] Speaker FHR: 80Hz
8:08:35 AM [IMPORTANT] Above crossover settings are calculated to be optimal. If you wish
to change them, use speaker XO customization tables inside the script.
8:08:35 AM [IMPORTANT] The settings below should be manually applied in the receiver's
setup menu:
8:08:35 AM [WARNING!] Please set 'Subwoofer Mode' to 'LFE + Main', set 'Bass extraction lpf'
to 250Hz in your receiver!
8:08:35 AM [WARNING!] In older receivers, 'bass extraction lpf' can be set by the crossover
frequency of the 'Large' speaker pair in 'LFE + Main' mode!
8:08:35 AM [INFORMATION] Optimizing EQ filters and generating expected final outputs in
REW for each channel...
8:10:55 AM [INFORMATION] Calculating Audyssey auto-levelling compensations and
uploading optimized settings into the final calibration file...
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker C to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker FL to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker FR to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker RHL to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker RHR to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker SBL to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker SBR to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker SLA to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker SRA to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker TML to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker TMR to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker FHL to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied 0.0dB extra volume adjustment to speaker FHR to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied -2.0dB extra adjustment to speaker SWMIX to
compensate for Audyssey auto-levelling.
8:10:56 AM [INFORMATION] Applied -2.0dB extra adjustment to speaker SWMIX to
compensate for Audyssey auto-levelling.
8:10:56 AM [IMPORTANT] Congratulations! 'A1 EVO' optimization completed successfully in
12 minutes and 31 seconds on Dec 26, 2024, 08:10 AM.
8:10:56 AM [INFORMATION]
******************************************************************************
***************************************************************
8:10:57 AM [IMPORTANT] When prompted, save the optimized .ady file to your computer and
transfer it to your MultEQ Editor app.
8:10:57 AM [IMPORTANT] Next, transfer ady file 'as is' from MultEQ Editor app to your AV
receiver as you normally would after a calibration.
8:10:57 AM [IMPORTANT] If you are using Dynamic EQ, consider the included program to fix
Audyssey's excessive surround boost at lower volumes.
8:10:57 AM [INFORMATION] The Editor app graphs will no longer represent before/after
speaker responses due to the special filtering technique implemented.
8:10:57 AM [IMPORTANT] You can save this log to your computer for future reference with
mouse right click and by selecting 'Save as'.
8:10:57 AM [INFORMATION] Do not forget to regularly check YT video comments for info on
frequent issues and solutions:https://youtu.be/JDOaU-1n3ek?si=cVJA5IzMv23Ngqs6
8:10:57 AM [INFORMATION]
******************************************************************************
***************************************************************
8:10:57 AM [IMPORTANT] Enjoy your EVO'lved sound!