PROJECT REPORT FORMAT

A Project Report must include the following items:

 Front Page (See the format of the Design below)

 internship letter issued by organizations
 Certificate issued by the Organization.
 Certificate by Project Guide of the Institute.
 Acknowledgement
 Declaration

NOTE: The Final Project Report must be submitted in three copies (Hard binding) by every
member of a Project.
PAGE DIMENSIONS AND MARGIN
 The dimensions of the final bound report should be 290mm x 205mm. Standard A4
size (297mm x 210mm) executive bond paper must be used.

 The size of Report should 60 to 80 Pages of typed matter (Excluding Coding).

 The Report (at the time of submission) should have the following page margins:

Top edge : 30 to 35 mm
Bottom edge : 25 to 30mm
Left side : 35 to 40mm
Right side : 20 to 25 mm
 The Report should be prepared on good quality white paper preferably no lower than
80gsm.

 Tables and figures should conform to the margin specifications. Large size figures
should be photographically or otherwise reduced to the appropriate size before
insertion.

BINDING SPECIFICATIONS
 Project report should be hard bound in good quality.

 Color of the binding paper must be Black .

 The cover should be printed in block letters
 The text for printing should be GOLDEN in color.
 Name of the student, batch and title of the project must be printed at the side of the
report, on the cover.

FORMATTING:-
Main heading
(Title Case, font size 16, Times New Roman, Bold, Left Align)
Sub Heading
(Title Case, font size 14, Times New Roman, Bold, Left Align)
Content Formatting
(Font Size 12, Times New Roman, Spacing 1.5, Justified Alignment)
Numbering of pages should be done in bottom of the pages
 TITLE OF PROJECT REPORT
<Hard Binding cover page, Times New Roman, Font Size 20><1.5 line spacing>

A Project Report Submitted

In Partial Fulfillment
for award of Master of Computer Applications
< Times New Roman, Font Size 14, Italic>

by

NAME OF STUDENT
(Roll No.XXXXXX)
< Times New Roman, Font Size 14>

Under the Supervision of <font size 12>

Mr. NAME OF SUPERVISOR
Designation, Department
< Times New Roman, font size 14>

School of Computer Applications

NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY,
GREATER NOIDA
(An Autonomous Institute)
Affiliated to
DR. A.P.J. ABDUL KALAM TECHNICAL UNIVERSITY, LUCKNOW
May, 2024
< Times New Roman, font size 14>
 Table of Contents – Chapters with Page No.

TABLE OF CONTENTS
Page No.

Declaration i
Certificate ii
Acknowledgements iii
Abstract iv
Dedication (optional)
List of Tables vii
List of Figures viii
List of Abbreviations ix

Chapter No. Chapter Page No.

1. Introduction
1.1 Introduction to the project
1.2 Purpose of the project
1.3 Problems in the existing system
1.4 Solution to these problems
2. Feasibility Study
2.1 Technical Feasibility
2.1.1 ……..
2.2 Operational Feasibility
3. System Analysis
3.1 Study of the system
3.2 Proposed system
3.3 Input and Output
3.4 Process models used with justifications.
4. Software Requirement Specifications
4.1 Functional Requirements
4.2 Performance Requirement
4.3 Hardware Requirements
4.4 Software Requirements
5. System Design
5.1 Introduction
5.2 E-R Diagram
5.3 Data Flow Diagram
5.4 Data Dictionary
6. Output Screens (Snap shot with filling data in text box )
7. System Testing and Implementation
7.1 Introduction of testing
7.2 Implementation
8. System Security
 8.1 Introduction
8.2 Security in Software
9. Conclusion
10. Future Scope
11. Reference
12. CURRICULUM VITAE

(Signature of the Candidate)

Name: ……………………..

Roll No:…………….
 DECLARATION
<Times New Roman, font size 14>

I hereby declare that the work presented in this report entitled “PROJECT REPORT
TITLE”, was carried out by me. I have not submitted the matter embodied in this report for
the award of any other degree or diploma of any other University or Institute. I have given
due credit to the original authors/sources for all the words, ideas, diagrams, graphics,
computer programs, experiments, results, that are not my original contribution. I have used
quotation marks to identify verbatim sentences and given credit to the original
authors/sources.

I affirm that no portion of our work is plagiarized, and the experiments and results reported in
the report are not manipulated. In the event of a complaint of plagiarism and the manipulation
of the experiments and results, I shall be fully responsible and answerable.

< Times New Roman, font size 12>

Name :
Roll Number :
(Candidate Signature)
 NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY,
GREATER NOIDA
(An Autonomous Institute Affiliated to AKTU, Lucknow)

CERTIFICATE

Certified that Name of students (enrollment numbers: xxxxxxxxxxxxx) have carried out the

Industrial Project in this Report entitled “Title of Project Report” for the award of Master

Of Computer Applications from Dr. APJ Abdul Kalam Technical University, Lucknow

under my supervision. The Project Report embodies results of original work, and studies are

carried out by the students herself/himself. < Times New Roman, font size 12>

(Signature)
Name of Project Coordinator
Designation of Coordinator
Date :

(Signature of Dean) (Signature of HoD)

Prof. (Dr.) C. S. Yadav Dr. Apoorva Joshi
Dean, MCA HoD, MCA

Date: Date :
 ACKNOWLEDGEMENTS
<Times New Roman, font size 14>

We would like to express my gratitude towards Guide name and Co guide name for their
guidance and constant supervision as well as for providing necessary information regarding
the project & also for their support in completing the project.

Our thanks and appreciations to respected HOD, Dy. HOD, for their motivation and support
throughout.

<Times New Roman, font size 12>

 ABSTRACT
<Times New Roman, font size 14>

<It should be typed single line spacing, in Times New Roman with font size 12 .>
 LIST OF TABLES

Table No. Table Caption Page No

4.1 Output for Tokenization 72

5.1 Dataset 48

5.2 Comparison of accuracy of DL-based 58

Method with NLP techniques and Used
Methods
 LIST OF FIGURES

Fig No Caption Page No

1.1 NLP 13

4.1 Block Diagram 58

4.2 Text Normalization 60

4.3 Example of Lemmatization 61

4.4 Example for Word Embedding 63

4.5 Recurrent Neural Network 64

5.1 Label Values 69

5.2 Applying stopwords 69

5.3 EDA 70

5.4 Applying Multilabel Binarizer 70

5.5 Final corpus before training 71

5.6 Generating word cloud 71

5.7 Count vectorizer 72

 LIST OF ABBREVIATIONS

Abbreviation Full Form

DL Deep learning

LDA Latent Dirichlet allocation

LSTM Long short-term memory

GRU Gated Recurrent Unit

NLP Natural language processing

TF-IDF Term Frequency-Inverse Document Frequency

GloVe Global Vectors

CURB Scalable Online Algorithm

EANN Event Adversarial Neural Network

BiLSTM Bidirectional LSTM

 CHAPTER 1
<Font size 20>

INTRODUCTION:

<Times New Roman, Font size 12>

1.1 OBJECTIVES:

Write text here………….

< Times New Roman, Font size 12>

 REFERENCES
<Times New Roman, Font size 12, IEEE Referencing Style>

[S.No.] Author’s name. Author’s Surname, “Title of article”, Journal Title, Volume number,
issue number, page numbers, Year. Available Online: URL

[1] Robles,T, Alcaria,R., de.Andrés, D.M., de.la.Cruz, M.N., Calero, R..,Iglesias,S., &
Lopez, .M, “An IoT based reference architecture for smart water management processes”, J.
Wirel. Mob. Networks Ubiquitous Comput. Dependable Appl, 6(1), 4-23. (2015).

[2] Lee,.S.W., Sarp,.S., Jeon, .D.J., & .Kim, .J.H.. “Smart water grid: the future water
management platform”. Desalination and Water Treatment, 55(2), 339-346, (2015).
 CURRICULUM VITAE

<Please write one page latest CV of the student>