Scribd
Upload
28 views1 page

EG - Assignment 01

This document outlines an engineering graphics assignment for the Parvatibai Genba Moze College of Engineering, focusing on the projection of lines in relation to horizontal and vertical planes. It includes eight specific problems requiring the drawing of projections and calculations of true lengths and inclinations of various lines. The assignment is intended for the second semester of the academic year 2024-25 for the FE C Division.

Uploaded by

piyushdalvi2006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

EG - Assignment 01

This document outlines an engineering graphics assignment for the Parvatibai Genba Moze College of Engineering, focusing on the projection of lines in relation to horizontal and vertical planes. It includes eight specific problems requiring the drawing of projections and calculations of true lengths and inclinations of various lines. The assignment is intended for the second semester of the academic year 2024-25 for the FE C Division.

Uploaded by

piyushdalvi2006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Record No.

:
Genba Sopanrao Moze Trust’s
Parvatibai Genba Moze College of Engineering Revision: 00

Date: 30/01/2025

Engineering Graphics (EG)


Assignment No-1
Projections Line
Department: FE C Division Academic Year: 2024-25 Sem: II

1. A point of line AB is in HP and 15 mm in front of VP its front view and top view
makes an angle 51° & 48° with HP & VP respectively. Draw the projection of line
AB if its end point B is 51 mm above HP. Find its true length & True inclinations.

2. The point A of 65 mm along AB in HP and 15 mm in front of VP. The line is inclined


to HP and VP at 40° and 35° respectively. Draw the projection of line AB.

3. The point A of line AB =70 mm in HP and 20 mm in front of VP. The front view
and Top view line makes 65° and 67° with HP and VP respectively. Draw the
projections of line. Find the true inclinations.

4. The point A of line AB is in HP and 20 mm in front of VP. The front view and Top
view line makes 40° and 45° with HP and VP respectively. Draw the projections if
the projector distance between end points of the line is 70 mm. Find the true length
and true inclinations.

5. The point A of line AB is 15 mm of front VP and is in HP. The front view and top
view of line AB makes an angle 40° and 35° with XY respectively. Draw the
projections, if the projector distance between the end points of the line is 60 mm.
Find the true length of line and true inclinations made by the line.

6. The TV of an 80 mm long line AB measures 50 mm. The point A is 50 mm in front


of VP and 20 mm above HP. The point B is 20 mm in front of VP and is above HP.
Draw the projections of line AB and find its inclinations with the HP and VP.

7. The point P of a line PQ is 25 mm above HP while its end point Q is 15 mm in front


of VP. Its plan and elevation make 40° and 35° with xy respectively. Draw the
projections; if the projector distance between the end points of line PQ is 60 mm.
Find the inclinations made by the line with HP and VP.

8. The end point A of 100 mm long line AB is in HP and it's another end point B is in
VP the front view of line is inclined at an angle of 40° to HP. Draw the projections
of a line, if the projector distance between the end points of line is 60 mm. Find the
inclination made by the line with HP and VP.

You might also like