Intel® Desktop Board DN2800MT

Product Guide
Order Number: G37706-002

Downloaded from www.Manualslib.com manuals search engine

 Revision History
Revision Revision History Date
-001 First release of the Intel® Desktop Board DN2800MT Product Guide October 2011
-002 Second release of the Intel® Desktop Board DN2800MT Product Guide June 2012

Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended
for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and
product descriptions at any time, without notice.
Intel Desktop Board DN2800MT may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing
your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel
literature, may be obtained from Intel Corporation by going to the World Wide Web site at:
http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Intel Core, Xeon, Celeron, and Pentium are trademarks of Intel Corporation in the United States
and/or other countries.
* Other names and brands may be claimed as the property of others.

Copyright © 2011, 2012 Intel Corporation. All rights reserved.

Downloaded from www.Manualslib.com manuals search engine

 Preface
This Product Guide gives information about board layout, component installation, BIOS
updates, and regulatory requirements for Intel® Desktop Board DN2800MT.

Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for
general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.)
for use in personal computers (PC) for installation in homes, offices, schools, computer
rooms, and similar locations. The suitability of this product for other PC or embedded
non-PC applications or other environments, such as medical, industrial, alarm systems,
test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization
The chapters in this Product Guide are arranged as follows:
1 Desktop Board Features: a summary of product features
2 Installing and Replacing Desktop Board Components: instructions on how to install
the Desktop Board and other hardware components
3 Updating the BIOS: instructions on how to update the BIOS
A Error Messages and Indicators: information about BIOS error messages and beep
codes
B Regulatory Compliance: describes the board’s adherence to safety standards and
EMC regulations and its product certifications

Conventions
The following conventions are used in this manual:

CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE
Notes call attention to important information.

iii
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Terminology
The table below gives descriptions of some common terms used in the product guide.
Term Description
GB Gigabyte (1,073,741,824 bytes)
GHz Gigahertz (one billion hertz)
KB Kilobyte (1024 bytes)
MB Megabyte (1,048,576 bytes)
Mb Megabit (1,048,576 bits)
MHz Megahertz (one million hertz)

iv
Downloaded from www.Manualslib.com manuals search engine
 Contents
1 Desktop Board Features
Feature Summary ................................................................................................. 9
Supported Operating Systems .............................................................................. 11
Desktop Board Components.................................................................................. 12

2 Installing and Replacing Desktop Board Components

Before You Begin................................................................................................. 15
Installation Precautions ........................................................................................ 16
Prevent Power Supply Overload ..................................................................... 16
Observe Safety and Regulatory Requirements ................................................. 16
Installing the I/O Shield ....................................................................................... 17
Installing and Removing the Desktop Board ............................................................ 18
Installing System Memory .................................................................................... 19
Connecting to SATA Drives ................................................................................... 22
Installing a PCI Express Mini Card in the PCI Express Full-/Half-Mini Card Slot ............ 24
Installing a PCI Express Mini Card in the PCI Express Half-Mini Card Slot ................... 26
Installing an Intel® Z-U130 USB Solid-State Drive or Compatible Device .................... 27
Connecting to the Internal Headers and Connectors................................................. 29
S/PDIF Header ............................................................................................ 30
Internal Stereo Speakers Connector ............................................................... 30
Serial Port Headers ...................................................................................... 30
Parallel Port Header ..................................................................................... 31
Front Panel Header ...................................................................................... 31
Front Panel Audio Header ............................................................................. 32
Front Panel USB 2.0 Header .......................................................................... 32
Front Panel USB 2.0 Header (with Flash Drive Support) .................................... 33
DMIC Header .............................................................................................. 33
Custom Solutions Header.............................................................................. 34
Connecting a System Fan ..................................................................................... 34
Connecting to a Power Supply............................................................................... 35
Setting the BIOS Configuration Jumper .................................................................. 37
Clearing Passwords.............................................................................................. 38
Replacing the Battery .......................................................................................... 39

3 Updating the BIOS

Updating the BIOS with the Intel® Express BIOS Update Utility ................................. 45
Updating the BIOS Using the F7 Function Key ......................................................... 46
Updating the BIOS with the Intel® Flash Memory Update Utility ................................ 46
Recovering the BIOS ........................................................................................... 47

A Error Messages and Indicators

Front-panel Power LED Blink and Speaker Beep Codes ............................................. 49
BIOS Error Messages ........................................................................................... 50

B Regulatory Compliance
Safety Standards ................................................................................................ 51
Battery Caution ........................................................................................... 51
European Union Declaration of Conformity Statement .............................................. 52

v
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Product Ecology Statements ................................................................................. 53

Recycling Considerations .............................................................................. 53
China RoHS ................................................................................................ 56
EMC Regulations ................................................................................................. 57
FCC Declaration of Conformity....................................................................... 57
Canadian Department of Communications Compliance Statement ...................... 58
Japan VCCI Statement ................................................................................. 58
Korea Class B Statement .............................................................................. 59
Ensure Electromagnetic Compatibility (EMC) Compliance .................................. 59
Product Certifications ........................................................................................... 60
Board-Level Certifications ............................................................................. 60
Chassis- and Component-Level Certifications .................................................. 61
ENERGY STAR*, e-Standby, and ErP Compliance ..................................................... 61

Figures
1. Intel Desktop Board DN2800MT Components (Top) ............................................ 12
2. Intel Desktop Board DN2800MT Components (Bottom)....................................... 14
3. Installing an I/O Shield .................................................................................. 17
4. Intel Desktop Board DN2800MT Mounting Screw Hole Locations .......................... 18
5. Installing an SO-DIMM ................................................................................... 20
6. Removing an SO-DIMM .................................................................................. 21
7. Connecting the SATA Data and Power Cables .................................................... 23
8. Installing a PCI Express Mini Card in the Full-/Half-Mini Card Slot ........................ 25
9. Installing a PCI Express Mini Card in the Half-Mini Card Slot ............................... 26
10. Installing an Intel Z-U130 USB Solid-State Drive (or Compatible Device) .............. 28
11. Internal Headers and Connectors ..................................................................... 29
12. Location of the Chassis Fan Header .................................................................. 34
13. Power Supply Connections .............................................................................. 35
14. Location of the BIOS Configuration Jumper Block ............................................... 37
15. Removing and Replacing the Battery ................................................................ 44
16. Intel Desktop Board DN2800MT China RoHS Material Self Declaration Table.......... 56

vi
Downloaded from www.Manualslib.com manuals search engine
 Contents

Tables
1. Intel Desktop Board DN2800MT Features ............................................................ 9
2. Intel Desktop Board DN2800MT Components (Shown in Figure 1) ....................... 13
3. Intel Desktop Board DN2800MT Components (Bottom) (Shown in Figure 2) ......... 14
4. S/PDIF Header Signal Names .......................................................................... 30
5. Internal Stereo Speakers Connector Signal Names............................................. 30
6. Serial Port Header ......................................................................................... 30
7. Parallel Port Header ....................................................................................... 31
8. Front Panel Header Signal Names .................................................................... 31
9. Front Panel Audio Signal Names for Intel HD Audio ............................................ 32
10. Front Panel Audio Header Signal Names for AC ’97 Audio.................................... 32
11. Front Panel Dual-Port USB 2.0 Header Signal Names.......................................... 32
12. Front Panel Dual-Port USB 2.0 Header (with Flash Drive Support)
Signal Names ................................................................................................ 33
13. DMIC Header Signal Names ............................................................................ 33
14. Custom Solutions Header Signal Names ........................................................... 34
15. Jumper Settings for the BIOS Setup Program Modes .......................................... 38
16. BIOS Front-panel Power LED Blink Codes.......................................................... 49
17. BIOS Speaker Beep Codes .............................................................................. 50
18. BIOS Error Messages ..................................................................................... 50
19. Safety Standards ........................................................................................... 51
20. EMC Regulations ............................................................................................ 57
21. Regulatory Compliance Marks ......................................................................... 60

vii
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

viii
Downloaded from www.Manualslib.com manuals search engine
 1 Desktop Board Features
This chapter briefly describes the features of Intel® Desktop Board DN2800MT.
Table 1 summarizes the major features of the Desktop Board.
For a detailed description of Intel® Desktop Board DN2800MT, refer to the Technical
Product Specification at http://www.intel.com/Products/Desktop/Motherboards/db-
DN2800MT/DN2800MT-technicaldocuments.htm.

Feature Summary
Table 1. Intel Desktop Board DN2800MT Features
Form Factor Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters
[6.7 inches] x 170.18 millimeters [6.7 inches])
Fanlessly-cooled, soldered-down dual-core Intel® Atom™ Processor
Processor
N2800 with integrated graphics and memory controller
Chipset Intel® NM10 Express Chipset
Memory • Two 204-pin Double Data Rate 3 (DDR3) Small Outline Dual Inline
Memory Module (SO-DIMM) sockets
• Support for DDR3 800 MHz and DDR3 1066 MHz SO-DIMMs
Note: Higher speed SO-DIMMs operate at 1066 MHz if supported by
the memory module.
• Support for up to 4 GB of system memory on a single SO-DIMM (or
two 2 GB SO-DIMMs)
Graphics • Integrated graphics:
― Digital displays (High Definition Multimedia Interface* (HDMI*))
― Analog displays (VGA)
― Internal flat panel displays:
 LVDS
 Embedded DisplayPort* eDP*
• External graphics support via a PCI Express 1.0a x1 graphics add-in
card connector
continued

9
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Table 1. Feature Summary (continued)

Audio • 2 + 2 Channel Intel® High Definition Audio (Intel® HD Audio) using
a Realtek* ALC888S audio codec supporting:
― Analog stereo line-out (back panel jack)
― In-chassis stereo speakers support (3 W/3 Ω via an internal
header)
― S/PDIF digital audio output (internal header)
― DMIC digital microphone input (internal header)
― Analog line-in (back panel jack)
― Front panel Intel HD Audio/AC’97 headphones/mic support
(internal header)
• 8-channel (7.1) Intel HD Audio via the HDMI interface
Expansion • One PCI Express 1.0a x1 add-in card connector
Capabilities • One PCI Express Full-/Half-Mini Card slot
• One PCI Express Half-Mini Card slot
Peripheral • Eight exposed USB 2.0 ports including:
Interfaces ― Four front panel ports (via two internal headers; one header
supports an Intel® Z-U130 USB Solid-State Drive (or
compatible device))
― Two ports are implemented with stacked back panel connectors
(black)
― Two high-current/fast-charging ports implemented through
stacked back panel connectors (yellow)

• Two SATA ports:

― One internal SATA 3.0 Gb/s port (Port 0, black)
― One internal SATA 3.0 Gb/s port (multiplexed with an mSATA
port, routed to the PCI Express Full-/Half-Mini Card slot)
(Port 1, gray)
Legacy I/O Legacy I/O Controller (Nuvoton* W83677DHG) that provides:
• Two serial ports via onboard headers
• One parallel port via an onboard header
• Hardware management support
LAN Support Intel® 82579L Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
including an RJ-45 back panel connector with integrated status LEDs
BIOS • Intel® BIOS resident in a Serial Peripheral Interface (SPI) Flash
device
• Support for Advanced Configuration and Power Interface (ACPI),
Plug and Play, and System Management BIOS (SMBIOS)
Instantly Available • Suspend to RAM support
PC Technology • Wake on PCI Express, LAN, front panel, serial, and USB ports
continued

10
Downloaded from www.Manualslib.com manuals search engine
 Desktop Board Features

Table 1. Feature Summary (continued)

Hardware Nuvoton W83677DHG based subsystem, including:
Management • Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• One 3-pin system fan header with speed control
• Support for Platform Environmental Control Interface (PECI)

Supported Operating Systems

For the latest information on operating system support refer to the Intel Desktop
Board DN2800MT web page at
http://www.intel.com/products/motherboard/index.htm.

11
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Desktop Board Components

Figure 1 shows the approximate location of the major components on the top side of
Intel Desktop Board DN2800MT.

Figure 1. Intel Desktop Board DN2800MT Components (Top)

12
Downloaded from www.Manualslib.com manuals search engine
 Desktop Board Features

Table 2. Intel Desktop Board DN2800MT Components (Shown in Figure 1)

Label Description
A Battery
B Back panel connectors
C System fan header
D Internal DC power connector
E Intel NM10 Express Chipset
F BIOS configuration jumper block
G SATA 3.0 Gb/s Port 1 connector
H SATA power connector
I PCI Express Half-Mini Card slot
J SATA 3.0 Gb/s Port 0 connector
K Intel Atom processor with fanless heat sink
L LVDS connector
M FPD brightness connector
N Flat Panel voltage selection header
O Backlight inverter voltage selection header
P DDR3 SO-DIMM 0 socket
Q DDR3 SO-DIMM 1 socket
R Front panel header
S Front panel audio header
T Front panel USB 2.0 header
U Front panel USB 2.0 header (with flash drive support)
V Standby power indicator LED
W Serial port header (COM1)
X Serial port header (COM2)
Y Parallel port header
Z DMIC header
AA PCI Express Full-/Half-Mini Card slot
BB Custom solutions header
CC PCI Express 1.0a x1 add-in card connector
DD S/PDIF header
EE Internal stereo speakers connector

13
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Figure 2. Intel Desktop Board DN2800MT Components (Bottom)

Table 3. Intel Desktop Board DN2800MT Components (Bottom)

(Shown in Figure 2)
Label Description
A eDP connector

Online Support

For more information on Intel Desktop Board DN2800MT, consult the following online
resources:
• Intel Desktop Board DN2800MT http://www.intel.com/products/desktop/motherboard/
index.htm
• Desktop Board Support http://www.intel.com/p/en_US/support?iid=hdr+supp
ort
• Available configurations for Intel http://ark.intel.com
Desktop Board DN2800MT
• Compatible processors http://processormatch.intel.com
• Processor specifications http://www.intel.com/products/desktop/processors/in
dex.htm
• Chipset information http://www.intel.com/products/desktop/chipsets/inde
x.htm
• BIOS and driver updates http://downloadcenter.intel.com/

14
Downloaded from www.Manualslib.com manuals search engine
 2 Installing and Replacing Desktop
Board Components
This chapter tells you how to:
• Install the I/O shield
• Install and remove the Desktop Board
• Install and remove a processor
• Install and remove system memory
• Connect to SATA drives
• Install a PCI Express Mini Card
• Install an Intel Z-U130 USB Solid-State Drive or Compatible Device
• Connect to the internal headers and connectors
• Connect a system fan
• Connect a power supply
• Set the BIOS configuration jumper
• Clear passwords
• Replace the battery

Before You Begin

CAUTION
The procedures in this chapter assume familiarity with the general terminology
associated with personal computers and with the safety practices and regulatory
compliance required for using and modifying electronic equipment.
Disconnect the computer from its power source and from any telecommunications
links, networks, or modems before performing any of the procedures described in this
chapter. Failure to disconnect power, telecommunications links, networks, or modems
before you open the computer or perform any procedures can result in personal injury
or equipment damage. Some circuitry on the board can continue to operate even
though the front panel power button is off.

Follow these guidelines before you begin:

• Always follow the steps in each procedure in the correct order.
• Set up a log to record information about your computer, such as model, serial
numbers, installed options, and configuration information.
• Electrostatic discharge (ESD) can damage components. Perform the procedures
described in this chapter only at an ESD workstation using an antistatic wrist strap
and a conductive foam pad. If such a station is not available, you can provide
some ESD protection by wearing an antistatic wrist strap and attaching it to a
metal part of the computer chassis.

15
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Installation Precautions
When you install and test the Intel Desktop Board, observe all warnings and cautions
in the installation instructions.
To avoid injury, be careful of:
• Sharp pins on connectors
• Sharp pins on printed circuit assemblies
• Rough edges and sharp corners on the chassis
• Hot components (such as processors, voltage regulators, and heat sinks)
• Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to
qualified technical personnel.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply,
make sure that the calculated total current loads of all the modules within the
computer is less than the output current rating of each of the power supplies output
circuits plus enough headroom for desktop board power consumption.

Refer to Section 2.5.1, Power Supply Considerations, of the Intel Desktop Board
DN2800MT Technical Product Specification for power budget analysis guidance.

Observe Safety and Regulatory Requirements

Read and follow the instructions in this section and the instructions supplied with the
chassis and associated modules. If you do not follow these instructions and the
instructions provided by the chassis and module suppliers, you increase your safety
risk and the possibility of noncompliance with regional laws and regulations. If the
instructions for the chassis are inconsistent with these instructions or the instructions
for associated modules, contact the supplier to find out how you can ensure that your
computer meets safety and regulatory requirements.
For information about the Desktop Board’s regulatory compliance, refer to Appendix B.

16
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Installing the I/O Shield

This Desktop Board comes with I/O shields. When installed in the chassis, the shield
blocks radio frequency transmissions, protects internal components from dust and
foreign objects, and promotes correct airflow within the chassis.

Select the proper I/O shield for the chassis you have chosen to use. Install the I/O
shield before installing the Desktop Board in the chassis. Place the shield inside the
chassis as shown in Figure 3. Press the shield into place so that it fits tightly and
securely. If the shield does not fit, obtain a properly sized shield from the chassis
supplier.

Figure 3. Installing an I/O Shield

17
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Installing and Removing the Desktop Board

CAUTION
Only qualified technical personnel should perform this procedure. Disconnect the
computer from its power source before performing the procedures described here.
Failure to disconnect the power before you open the computer can result in personal
injury or equipment damage.

Refer to your chassis manual for instructions on installing and removing the Desktop
Board.
Figure 4 shows the location of the mounting screw holes for Intel Desktop Board
DN2800MT.

Figure 4. Intel Desktop Board DN2800MT Mounting Screw Hole Locations

18
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Installing System Memory

NOTE
To be fully compliant with all applicable Intel SDRAM memory specifications, the board
requires SO-DIMMs that support the Serial Presence Detect (SPD) data structure.

The desktop board has two 204-pin DDR3 SO-DIMM sockets supporting two memory
modules on a single channel.
To install an SO-DIMM, follow these steps:
1. Observe the precautions in "Before You Begin" on page 15.
2. Turn off all peripheral devices connected to the computer. Turn off the computer
and disconnect the AC power cord.
3. Remove the computer’s cover and locate the DIMM sockets (see Figure 5).
4. Install the bottom SO-DIMM (Figure 5, A) first. Hold the SO-DIMM with the back
edge tilted slightly upwards, insert it into the socket, aligning the notch in the SO-
DIMM with the tab (Figure 5, B) in the socket. Gently push the back edge of the
SO-DIMM down until it snaps into the retention arms (Figure 5, C).
5. If you are installing a second SO-DIMM, repeat Step 4 for the second SO-DIMM
(Figure 5, D).
6. Replace the computer’s cover and reconnect the AC power cord.

NOTE
If you are installing only one SO-DIMM, it must be installed in the bottom socket
(SO-DIMM 1) (see Figure 5, A).

19
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Figure 5. Installing an SO-DIMM

20
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

To remove an SO-DIMM from the socket, gently spread the socket’s retention arms as
shown in Figure 6 to disengage them from the SO-DIMM.

Figure 6. Removing an SO-DIMM

21
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Connecting to SATA Drives

Intel Desktop Board DN2800MT supports two SATA drives with two data connectors
and one power connector. To enable low-profile connectivity, the board ships with two
SATA data cables with right-angled connectors and an in-line power cable that
provides:
• a right-angled female-gender 15-pin SATA power connector for low-profile board
connectivity
• a female-gender 1 x 4 Molex-type power connector for system component power
flexibility
• a 15-pin female-gender SATA power connector for SATA drive power
• a vertical 15-pin female-gender SATA power connector for SATA drive power

NOTE
If you install an mSATA drive in the board’s PCI Express Full-/Half-Mini Card slot, SATA
port 1 (gray) will be disabled.

To connect a SATA drive to the Desktop Board:

1. Observe the precautions in "Before You Begin" on page 15.
2. Attach the right angled connector on the SATA data cable to one of the SATA
connectors on the board (Figure 7, A).
3. Attach the other end of the SATA data cable to the SATA drive (Figure 7, B).
4. Attach the right-angled 15-pin SATA power connector on the power cable to the
15-pin SATA power connector on the Desktop Board (Figure 7, C).
5. Attach the 15-pin SATA power connector (Figure 7, D) on the end of the power
cable to the mating connector on a SATA drive.

22
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Figure 7. Connecting the SATA Data and Power Cables

23
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Installing a PCI Express Mini Card in the PCI

Express Full-/Half-Mini Card Slot
A PCI Express Full-Mini or Half-Mini Card can be installed in the Desktop Board’s PCI
Express Full-/Half-Mini Card slot.

To install a PCI Express Full-Mini Card in this slot, see Figure 8 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 15.
2. Locate the PCI Express Full-/Half-Mini Card slot (Figure 1, AA).
3. Insert the card into the PCI Express Mini Card connector (Figure 8, A) at a slightly
upward angle.
4. Align the mounting holes and secure the card in place (Figure 8, B).

To install a PCI Express Half-Mini Card in this slot, see Figure 8 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 15.
2. Locate the PCI Express Full-/Half-Mini Card slot (Figure 1, AA).
3. If necessary, move the mounting standoffs to the location shown in Figure 8, C.
4. Insert the card into the PCI Express Mini Card connector (Figure 8, D) at a slightly
upward angle.
5. Align the mounting holes and secure the card in place (Figure 8, E).

24
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Figure 8. Installing a PCI Express Mini Card in the Full-/Half-Mini Card Slot

25
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Installing a PCI Express Mini Card in the PCI

Express Half-Mini Card Slot
A PCI Express Half-Mini Card can be installed in the Desktop Board’s PCI Express
Half-Mini Card slot.

To install a PCI Express card in this slot, see Figure 9 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 15.
2. Locate the PCI Express Half-Mini Card slot (Figure 1, I).
3. Insert the card into the PCI Express Mini Card connector (Figure 9, A) at a slightly
upward angle.
4. Align the mounting holes and secure the card in place (Figure 9, B).

Figure 9. Installing a PCI Express Mini Card in the Half-Mini Card Slot

26
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Installing an Intel® Z-U130 USB Solid-State

Drive or Compatible Device
An Intel Z-U130 USB Solid-State Drive or compatible device can be installed on the
Desktop Board by using the onboard USB 2.0 header shown in Figure 1, U. This
header provides support for the solid-state drive.
To install an Intel Z-U130 USB Solid-State Drive or compatible device on the Desktop
Board, follow these steps:
1. Observe the precautions in "Before You Begin" on page 15.
2. Align the connector (Figure 10, A) on the bottom of the solid state drive with the
USB 2.0 header on the Desktop Board. The connectors are keyed and will mate
correctly when the solid state drive is oriented as shown in Figure 10.
3. Secure the solid state drive to the Desktop Board with the provided screw
(Figure 10, B).

27
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Figure 10. Installing an Intel Z-U130 USB Solid-State Drive

(or Compatible Device)

28
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Connecting to the Internal Headers and

Connectors
Before connecting cables to any of the internal headers and connectors, observe the
precautions in “Before You Begin” on page 15. Figure 11 shows the location of the
internal headers and connectors on Intel Desktop Board DN2800MT.

Figure 11. Internal Headers and Connectors

29
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

S/PDIF Header
Figure 11, A shows the location of the S/PDIF output header. Table 13 shows the pin
assignments and signal names for the S/PDIF output header.

Table 4. S/PDIF Header Signal Names

Pin Description
1 Ground
2 S/PDIF Out
3 Key (no pin)
4 +5 VDC

Internal Stereo Speakers Connector

Figure 11, B shows the location of the internal stereo speakers connector and Table 5
shows the pin assignments and signal names.

Table 5. Internal Stereo Speakers

Connector Signal Names
Pin Signal Name
1 Front_L−
2 Front_L+
3 Front_R+
4 Front_R−

Serial Port Headers

Figure 11, C shows the location of the serial port headers. Table 6 shows the pin
assignments and signal names for each serial port header.

Table 6. Serial Port Header

Pin Signal Name Pin Signal Name
1 DCD (Data Carrier Detect) 2 RXD# (Receive Data)
3 TXD# (Transmit Data) 4 DTR (Data Terminal Ready)
5 Ground 6 DSR (Data Set Ready)
7 RTS (Request To Send) 8 CTS (Clear To Send)
9 RI (Ring Indicator) 10 Key (no pin)

30
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Parallel Port Header

Figure 11, D shows the location of the parallel port header. Table 7 shows the pin
assignments and signal names for the parallel port header.

Table 7. Parallel Port Header

Pin Signal Name Pin Signal Name
1 STROBE# 2 AUTOFD#
3 PD0 4 PERROR
5 PD1 6 INT#
7 PD2 8 SLCTIN#
9 PD3 10 Ground
11 PD4 12 Ground
13 PD5 14 Ground
15 PD6 16 Ground
17 PD7 18 Ground
19 ACK# 20 Ground
21 BUSY 22 Ground
23 FAULT# 24 Ground
25 SELECT 26 Key (no pin)

Front Panel Header

Figure 11, E shows the location of the front panel header. Table 8 shows the pin
assignments and signal names for the front panel header.

Table 8. Front Panel Header Signal Names

Pin Description In/Out Pin Description In/Out
Hard Drive Activity LED Power LED
1 Hard disk LED pull-up to +5 V Out 2 Front panel LED+ Out
3 Hard disk active LED Out 4 Front panel LED- Out
Reset Switch On/Off Switch
5 Ground 6 Power switch In
7 Reset switch In 8 Ground
Power Not Connected
9 Power (+5 V DC) Out 10 No pin

NOTE
When connecting individual wires from your chassis front panel to the front panel
header, be sure to observe the connection polarity. Positive wires are usually
solid color and negative wires are usually white or striped.

31
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Front Panel Audio Header

The front panel audio header shown in Figure 11, F supports both Intel HD Audio and
AC ’97 Audio.
Table 9 shows the pin assignments and signal names for Intel HD Audio and Table 10
shows the pin assignments and signal names for AC ’97 Audio.

Table 9. Front Panel Audio Signal Names for Intel HD Audio

Pin Signal Name Pin Signal Name
1 PORT 1L (Microphone) 2 GND
3 PORT 1R (Microphone) 4 PRESENCE#
5 PORT 2R (Headphone) 6 SENSE1_RETURN
7 SENSE_SEND 8 KEY (no pin)
9 PORT 2L (Headphone) 10 SENSE2_RETURN

Table 10. Front Panel Audio Header Signal Names for AC ’97 Audio
Pin Signal Name Pin Signal Name
1 MIC 2 AUD_GND
3 MIC_BIAS 4 PRESENCE#
5 FP_OUT_R 6 AUD_GND
7 No Connection 8 KEY (no pin)
9 FP_OUT_L 10 AUD_GND

Front Panel USB 2.0 Header

Figure 11, G shows the location of the standard front panel dual-port USB 2.0 header
and Table 11 shows the pin assignments and signal names.

Table 11. Front Panel Dual-Port USB 2.0 Header Signal Names
Pin Signal Name Pin Signal Name
1 Power (+5 V) 2 Power (+5 V)
3 D- 4 D-
5 D+ 6 D+
7 Ground 8 Ground
9 Key (no pin) 10 No Connection

32
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Front Panel USB 2.0 Header (with Flash Drive Support)

Figure 11, H shows the location of the standard front panel dual-port USB 2.0 header
and Table 12 shows the pin assignments and signal names.

Table 12. Front Panel Dual-Port USB 2.0 Header (with Flash Drive Support)
Signal Names
Pin Signal Name Pin Signal Name
1 Power (+5 V) 2 Power (+5 V)
3 D- 4 D-
5 D+ 6 D+
7 Ground 8 Ground
9 Key (no pin) 10 LED#

NOTE
Computer systems that have an unshielded cable attached to a USB port might not
meet FCC Class B requirements, even if no device or a low-speed USB device is
attached to the cable. Use a shielded cable that meets the requirements for a
full-speed USB device.

DMIC Header
Figure 11, I shows the location of the DMIC header. Table 13 shows the pin
assignments and signal names for the DMIC header.

Table 13. DMIC Header Signal Names

Pin Description
1 3.3 V
2 DMIC_DATA
3 Ground
4 DMIC_CLK
5 Key (no pin)

33
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Custom Solutions Header

Figure 11, J shows the location of the Custom Solutions header and Table 14 shows
the pin assignments and signal names.

Table 14. Custom Solutions Header Signal Names

Pin Signal Name Pin Signal Name
1 WDTO# 2 Ground
3 No Connection 4 SMB_CLK_RESUME
5 +3.3 V 6 SMB_DATA_RESUME
7 PWRBT# 8 CEC

Connecting a System Fan

You can connect a 3-wire system fan cable to the system fan header on the Desktop
Board as shown in Figure 12.

Figure 12. Location of the Chassis Fan Header

34
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Connecting to a Power Supply

The board supports a wide range of input voltages from either of the following power
supply types:
• External Power Supply – the board can be powered with an 8-19 V DC external
power supply though the DC jack on the back panel (Figure 13, A). This connector
accepts dual-barrel plugs with an inner diameter (ID) of 2.5 mm and an outer
diameter (OD) of 5.5 mm, where the inner contact is +8 V DC (±10 %) through
+19 V DC (±10 %) and the shell is Ground. The maximum current rating for this
connector is 8 A.
• Internal Power Supply – the board can alternatively be powered through the
internal 1 x 2 power connector (Figure 13, B), where pin 1 is Ground and pin 2 is
+8 V DC (±10 %) through +19 V DC (±10 %). The maximum current rating for
this connector is 10 A.
Use of an external power supply is preferred. Total power consumption depends on
the system configuration selected by the integrator. Refer to the Intel Desktop Board
DN2800MT Technical Product Specification for further guidance.

Figure 13. Power Supply Connections

35
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

CAUTION
The external power jack is the primary power input connector of Intel Desktop Board
DN2800MT. However, the Desktop Board also provides an internal 1 x 2 power
connector that can used be with a target system that already has an internal power
supply.
There is no isolation circuitry between the external power jack and the internal 1 x 2
power connector. It is the system integrator’s responsibility to ensure that no more
than one power supply unit is or can be attached to the board at any time and to
ensure that the external power jack is covered if the internal 1 x 2 power connector is
to be used. A plastic cover is shipped with the Desktop Board for this purpose.
Simultaneous connection of both external and internal power supply units may result
in damage to the desktop board, power supplies, or other hardware.

36
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before
moving the jumper. Moving the jumper with the power on may result in unreliable
computer operation.
Figure 14 shows the location of the Desktop Board’s BIOS configuration jumper block.

Figure 14. Location of the BIOS Configuration Jumper Block

37
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

The three-pin BIOS jumper block enables board configuration to be done in the BIOS
Setup program. Table 15 shows the jumper settings for the BIOS Setup program
modes.

Table 15. Jumper Settings for the BIOS Setup Program Modes
Jumper Setting Mode Description
1-2 Normal (default) The BIOS uses the current configuration and
passwords for booting.
2-3 Configure After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
None Recovery The BIOS recovers data in the event of a failed
BIOS update.

Clearing Passwords
This procedure assumes that the board is installed in the computer and the
configuration jumper block is set to normal mode.
1. Observe the precautions in "Before You Begin" on page 15.
2. Turn off all peripheral devices connected to the computer. Turn off the computer.
Disconnect the computer’s power cord from the AC power source (wall outlet or
power adapter).
3. Remove the computer cover.
4. Find the configuration jumper block (see Figure 14).
5. Place the jumper on pins 2-3.
6. Replace the cover, plug in the computer, turn on the computer, and allow it to
boot.
7. The computer starts the Setup program. Setup displays the Maintenance menu.
8. Use the arrow keys to select Clear Passwords. Press the Enter key and Setup
displays a pop-up screen requesting that you confirm clearing the password.
Select Yes and press the Enter key. Setup displays the maintenance menu again.
9. Press the F10 key to save the current values and exit Setup.
10. Turn off the computer. Disconnect the computer’s power cord from the AC power
source.
11. Remove the computer cover.
12. To restore normal operation, place the jumper on pins 1-2.
13. Replace the cover, plug in the computer, and turn on the computer.

38
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Replacing the Battery

A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When
the computer is not plugged into a wall socket, the battery has an estimated life of
three years. When the computer is plugged in, the standby current from the power
supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at
25 °C with 3.3 VSB applied.
When the voltage drops below a certain level, the BIOS Setup program settings stored
in CMOS RAM (for example, the date and time) might not be accurate. Replace the
battery with an equivalent one. Figure 15 on page 44 shows the location of the
battery.

CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

PRÉCAUTION
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les
piles usagées doivent être recyclées dans la mesure du possible. La mise au rebut des
piles usagées doit respecter les réglementations locales en vigueur en matière de
protection de l'environnement.

FORHOLDSREGEL
Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier
bør om muligt genbruges. Bortskaffelse af brugte batterier bør foregå i
overensstemmelse med gældende miljølovgivning.

OBS!
Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier
bør kastes i henhold til gjeldende miljølovgivning.

VIKTIGT!
Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras
enligt de lokala miljövårdsbestämmelserna.

VARO
Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on
mahdollista. Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten
mukaisesti.

39
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

VORSICHT
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie
darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen
Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen
des Herstellers entsprechend.

AVVERTIMENTO
Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto.
Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per
disfarsi delle pile usate, seguire le istruzioni del produttore.

PRECAUCIÓN
Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice
solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del
equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del
fabricante.

WAARSCHUWING
Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type
batterij. Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het
weggooien van gebruikte batterijen aan de plaatselijke milieuwetgeving.

ATENÇÃO
Haverá risco de explosão se a bateria for substituída por um tipo de bateria incorreto.
As baterias devem ser recicladas nos locais apropriados. A eliminação de baterias
usadas deve ser feita de acordo com as regulamentações ambientais da região.

AŚCIAROŽZNAŚĆ

Існуе рызыка выбуху, калі заменены акумулятар неправільнага тыпу.

Акумулятары павінны, па магчымасці, перепрацоўвацца. Пазбаўляцца ад старых
акумулятараў патрэбна згодна з мясцовым заканадаўствам па экалогіі.

UPOZORNÌNÍ

V případě výměny baterie za nesprávný druh může dojít k výbuchu. Je-li to možné,
baterie by měly být recyklovány. Baterie je třeba zlikvidovat v souladu s místními
předpisy o životním prostředí.

40
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

Προσοχή

Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία
λανθασμένου τύπου. Οι μπαταρίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο είναι
δυνατό. Η απόρριψη των χρησιμοποιημένων μπαταριών πρέπει να γίνεται σύμφωνα με
τους κατά τόπο περιβαλλοντικούς κανονισμούς.

VIGYÁZAT

Ha a telepet nem a megfelelő típusú telepre cseréli, az felrobbanhat. A telepeket

lehetőség szerint újra kell hasznosítani. A használt telepeket a helyi környezetvédelmi
előírásoknak megfelelően kell kiselejtezni.

AWAS
Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri
sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi
peraturan alam sekitar tempatan.

OSTRZEŻENIE

Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu

baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi
przepisami ochrony środowiska.

PRECAUŢIE

Risc de explozie, dacă bateria este înlocuită cu un tip de baterie necorespunzător.

Bateriile trebuie reciclate, dacă este posibil. Depozitarea bateriilor uzate trebuie să
respecte reglementările locale privind protecţia mediului.

ВНИМАНИЕ

При использовании батареи несоответствующего типа существует риск ее взрыва.

Батареи должны быть утилизированы по возможности. Утилизация батарей должна
проводится по правилам, соответствующим местным требованиям.

41
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

UPOZORNENIE

Ak batériu vymeníte za nesprávny typ, hrozí nebezpečenstvo jej výbuchu. Batérie by

sa mali podľa možnosti vždy recyklovať. Likvidácia použitých batérií sa musí vykonávať
v súlade s miestnymi predpismi na ochranu životného prostredia.

POZOR

Zamenjava baterije z baterijo drugačnega tipa lahko povzroči eksplozijo.

Če je mogoče, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi
okoljevarstvenimi predpisi.

UYARI

Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri
dönüştürülmelidir. Kullanılmış piller, yerel çevre yasalarına uygun olarak atılmalıdır.

OСТОРОГА

Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху.

Якщо можливо, використані батареї слід утилізувати. Утилізація використаних
батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля.

42
Downloaded from www.Manualslib.com manuals search engine
 Installing and Replacing Desktop Board Components

To replace the battery, follow these steps:

1. Observe the precautions in "Before You Begin" (see page 15).
2. Turn off all peripheral devices connected to the computer. Disconnect the
computer’s power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 15).
5. Disconnect the battery cable from the Desktop Board battery connector
(Figure 15, A).
6. Lift up on the battery (Figure 15, B) and carefully remove it from the board. It is
attached to the board by a non-permanent adhesive pad.
7. To install a new battery, connect the battery cable to the Desktop Board battery
connector (Figure 15, E), remove the protective covering (Figure 15, C) from the
adhesive pad on the back of the new battery, and reattach the battery to the board
(Figure 15, D) or the inside of the system chassis.
8. Replace the computer cover.

43
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Figure 15. Removing and Replacing the Battery

44
Downloaded from www.Manualslib.com manuals search engine
 3 Updating the BIOS

The BIOS Setup program can be used to view and change the BIOS settings for the
computer. You can access the BIOS Setup program by pressing the F2 key after the
Power-On Self-Test (POST) memory test begins and before the operating system boot
begins.

This chapter tells you how to update the BIOS by either using the Intel Express BIOS
Update utility or the Intel® Flash Memory Update Utility, and how to recover the BIOS
if an update fails.

Updating the BIOS with the Intel® Express

BIOS Update Utility
With the Intel Express BIOS Update utility you can update the system BIOS while in
the Windows environment. The BIOS file is included in an automated update utility
that combines the functionality of the Intel Flash Memory Update Utility and the ease
of use of Windows-based installation wizards.

To update the BIOS with the Intel Express BIOS Update utility:
1. Go to the Intel World Wide Web site Download Center at
http://downloadcenter.intel.com/
2. Navigate to the DN2800MT page. Click on the “BIOS Update” link and then select
the Express BIOS Update file.
3. Download the file to your hard drive. (You can also save this file to a removable
USB device. This is useful if you are updating the BIOS for multiple identical
systems.)
4. Close all other applications. This step is required. Your system will be rebooted at
the last Express BIOS Update window.
5. Double-click the executable file from the location on your hard drive where it was
saved. This runs the update program.
6. Follow the instructions provided in the dialog boxes to complete the BIOS update.

45
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Updating the BIOS Using the F7 Function Key

To use this BIOS update method:
1. Download and save the Recovery BIOS (.BIO) file to a temporary directory.
2. Copy the .BIO file to a USB thumb drive.
3. Plug the thumb drive into a USB port of the target computer.
4. Shut down the target computer.
5. Enable the F7 prompt display:
a. Power the computer on.
b. Enter the BIOS Setup by pressing the F2 key during boot.
c. Go to the Advanced > Boot Configuration menu.
d. Enable Display F7 to Update BIOS
e. Press the F10 key to save and exit.
6. During boot, when the F7 prompt is displayed, press the F7 key to enter the BIOS
Flash Update tool.
7. Select the USB thumb drive and press Enter.
8. Select the .BIO file and press Enter
9. Confirm you want to update the BIOS by pressing Enter.
10. Wait 2-5 minutes for the update to complete.
11. Remove the thumb drive.
12. Restart the computer.

Updating the BIOS with the Intel® Flash

Memory Update Utility
You can use the information in this section to update the BIOS using the Intel® Flash
Memory Update Utility. With the Intel Flash Memory Update Utility you can update the
system BIOS from a bootable CD-ROM, bootable USB flash drive, or other bootable
USB media.
You can update to a new version of the BIOS by using the Intel Flash Memory BIOS
update file. The Intel Flash Memory BIOS update file is a compressed file that contains
the files you need to update the BIOS. The BIOS update file contains:
• New BIOS file (including the Intel® Management Engine (Intel® ME) Firmware
Image)
• Intel® Integrator Toolkit Configuration File (optional)
• Intel Flash Memory Update Utility
You can obtain this file through your computer supplier or by navigating to the Intel
Desktop Board DN2800MT page on the Intel World Wide Web site Download Center at
http://downloadcenter.intel.com.

On the DN2800MT page, click on the “BIOS Update” link and then select the Iflash
BIOS Update file.

46
Downloaded from www.Manualslib.com manuals search engine
 Updating the BIOS

NOTE
Review the instructions distributed with the update utility before attempting a BIOS
update.

CAUTION
Do not interrupt the process or the system may not function properly.

1. Uncompress the BIOS update file and copy the .BIO file, IFLASH2.EXE, and .ITK file
(optional) to a bootable USB flash drive or other bootable USB media.
2. Configure the BIOS or use the F10 key option during POST to boot to the USB
device.
3. Manually run the IFLASH2.EXE file from the USB device and manually update the
BIOS.

CAUTION
DO NOT POWER DOWN YOUR COMPUTER before the update is complete. The update
may take up to 5 minutes.

Recovering the BIOS

It is unlikely that anything will interrupt the BIOS update; however, if an interruption
occurs, the BIOS could be damaged. Due to BIOS size and recovery requirements, a
CD-R with the .BIO file in the root directory will be required.

You can obtain the Recovery BIOS Update file through your computer supplier or by
navigating to the Intel Desktop Board DN2800MT page on the Intel World Wide Web
site Download Center at http://downloadcenter.intel.com.

On the DN2800MT page, click on the “BIOS Update” link and then select the Recovery
BIOS Update file.

NOTE
For more information about updating the Intel Desktop Board BIOS or recovering from
a BIOS update failure, go to
http://support.intel.com/support/motherboards/desktop/sb/CS-022312.htm.

47
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

48
Downloaded from www.Manualslib.com manuals search engine
 A Error Messages and Indicators
This appendix describes error messages generated by the Desktop Board’s BIOS. The
BIOS indicates these error messages with LED blink codes, speaker beep codes, and
by text displayed on the PC monitor.

Front-panel Power LED Blink and Speaker

Beep Codes
Whenever a recoverable error occurs during POST, the BIOS provides basic status and
error messages through front-panel power LED blink codes (Table 16) as well as
through audible beep codes (Table 17).

Table 16. BIOS Front-panel Power LED Blink Codes

Type Pattern
BIOS update in Off when the update begins, then on for 0.5 second, then off
progress for 0.5 second. The pattern repeats until the BIOS update is
complete.
Video error On-off (0.5 second each) two times, then a 3.0-second pause
(off), the entire pattern repeats (blink and pause) until the
system is powered off.
Memory error On-off (0.5 second each) three times, then a 3.0-second
pause (off), the entire pattern repeats (blinks and pause)
until the system is powered off.
Thermal trip warning Each beep will be accompanied by the following blink
pattern: .25 seconds on, .25 seconds off, .25 seconds on,
.25 seconds off. This results in a total of 32 blinks.

49
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Table 17. BIOS Speaker Beep Codes

Type Pattern Frequency/Comments
Video error On-off (1.0 second each) two times, then a 932 Hz
2.5-second pause (off), the entire pattern
repeats (beeps and pause) once and the
BIOS will continue to boot.
Memory error On-off (1.0 second each) three times, then 932 Hz
a 2.5-second pause (off), the entire pattern
repeats (beeps and pause) until the system
is powered off.
Thermal trip warning Alternate high and low beeps (1.0 second High beep 2000 Hz
each) for eight beeps followed by system Low beep 1500 Hz
shut down.

BIOS Error Messages

The BIOS may also display an error message on the PC monitor when certain
recoverable error occurs during POST. Table 18 gives an explanation of the BIOS error
messages.

Table 18. BIOS Error Messages

Error Message Explanation
CMOS Battery Low The battery may be losing power. Replace the battery
soon.
CMOS Checksum Bad The CMOS checksum is incorrect. CMOS memory may
have been corrupted. Run Setup to reset values.
Memory Size Decreased Memory size has decreased since the last boot. If no
memory was removed, then memory may be bad.
No Boot Device Available System did not find a device to boot.

50
Downloaded from www.Manualslib.com manuals search engine
 B Regulatory Compliance
This appendix contains the following regulatory compliance information for Intel
Desktop Board DN2800MT:
• Safety standards
• European Union Declaration of Conformity statement
• Product Ecology statements
• Electromagnetic Compatibility (EMC) regulations
• Product certifications

Safety Standards
Intel Desktop Board DN2800MT complies with the safety standards stated in Table 19
when correctly installed in a compatible host system.

Table 19. Safety Standards

Regulation Title
CSA/UL 60950-1 Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
EN 60950-1 Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
IEC 60950-1 Information Technology Equipment – Safety - Part 1: General
Requirements (International)

Battery Caution
There is insufficient space on this Desktop Board to provide instructions for replacing
and disposing of the Lithium ion coin cell battery. For system safety certification, the
statement below or an equivalent statement is required to be permanently and legibly
marked on the chassis near the battery.
A suitable caution label is included with Intel Desktop Board DN2800MT.

CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

For information about replacing the battery, go to page 39.

51
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

European Union Declaration of Conformity

Statement
We, Intel Corporation, declare under our sole responsibility that the product Intel®
Desktop Board DN2800MT is in conformity with all applicable essential requirements
necessary for CE marking, following the provisions of the European Council Directives
2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC
(ROHS Directive).

The product is properly CE marked demonstrating this conformity and is for

distribution within all member states of the EU with no restrictions.

This product follows the provisions of the European Directives 2004/108/EC,

2006/95/EC and 2002/95/EC.
Čeština Tento výrobek odpovídá požadavkům evropských směrnic 2004/108/EC,
2006/95/EC a 2002/95/EC.
Dansk Dette produkt er i overensstemmelse med det europæiske direktiv
2004/108/EC, 2006/95/EC & 2002/95/EC.
Dutch Dit product is in navolging van de bepalingen van Europees Directief
2004/108/EC, 2006/95/EC & 2002/95/EC.
Eesti Antud toode vastab Euroopa direktiivides 2004/108/EC, ja 2006/95/EC ja
2002/95/EC kehtestatud nõuetele.
Suomi Tämä tuote noudattaa EU-direktiivin 2004/108/EC, 2006/95/EC & 2002/95/EC
määräyksiä.
Français Ce produit est conforme aux exigences de la Directive Européenne
2004/108/EC, 2006/95/EC & 2002/95/EC.
Deutsch Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie
2004/108/EC, 2006/95/EC & 2002/95/EC.
Ελληνικά Το παρόν προϊόν ακολουθεί τις διατάξεις των Ευρωπαϊκών Οδηγιών
2004/108/EC, 2006/95/EC και 2002/95/EC.
Magyar E termék megfelel a 2004/108/EC, 2006/95/EC és 2002/95/EC Európai
Irányelv előírásainak.
Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer
2004/108/EC, 2006/95/EC, & 2002/95/EC.
Italiano Questo prodotto è conforme alla Direttiva Europea 2004/108/EC,
2006/95/EC & 2002/95/EC.
Latviešu Šis produkts atbilst Eiropas Direktīvu 2004/108/EC, 2006/95/EC un
2002/95/EC noteikumiem.
Lietuvių Šis produktas atitinka Europos direktyvų 2004/108/EC, 2006/95/EC, ir
2002/95/EC nuostatas.
Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej
2004/108/EC, 2006/95/EC u 2002/95/EC.
Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet
2004/108/EC, 2006/95/EC & 2002/95/EC.

52
Downloaded from www.Manualslib.com manuals search engine
 Regulatory Compliance

Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej

2004/108/EC, 206/95/EC i 2002/95/EC.
Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC,
2006/95/EC & 2002/95/EC.
Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC,
2006/95/EC & 2002/95/EC.
Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív
2004/108/EC, 2006/95/EC a 2002/95/EC.
Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC,
2006/95/EC in 2002/95/EC.
Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC,
2006/95/EC & 2002/95/EC.
Türkçe Bu ürün, Avrupa Birliği’nin 2004/108/EC, 2006/95/EC ve 2002/95/EC
yönergelerine uyar.

Product Ecology Statements

The following information is provided to address worldwide product ecology concerns
and regulations.

Recycling Considerations
As part of its commitment to environmental responsibility, Intel has implemented the
Intel® Product Recycling Program to allow retail consumers of Intel’s branded products
to return used products to selected locations for proper recycling.

Please consult http://intel.com/intel/other/ehs/product_ecology

for the details of this program, including the scope of covered products, available
locations, shipping instructions, terms and conditions, etc.

中文

作为其对环境责任之承诺的部分，英特尔已实施 Intel Product Recycling Program （英特尔产品

回收计划），以允许英特尔品牌产品的零售消费者将使用过的产品退还至指定地点作恰当的重复使用
处理。
请参考http://intel.com/intel/other/ehs/product_ecology
了解此计划的详情，包括涉及产品之范围、回收地点、运送指导、条款和条件等。

53
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Deutsch

Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel
Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel
Markenprodukten ermöglicht, gebrauchte Produkte an ausgewählte Standorte für
ordnungsgemäßes Recycling zurückzugeben.

Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte,

verfügbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der
http://intel.com/intel/other/ehs/product_ecology

Español
Como parte de su compromiso de responsabilidad medioambiental, Intel ha
implantado el programa de reciclaje de productos Intel, que permite que los
consumidores al detalle de los productos Intel devuelvan los productos usados en los
lugares seleccionados para su correspondiente reciclado.

Consulte la http://intel.com/intel/other/ehs/product_ecology
para ver los detalles del programa, que incluye los productos que abarca, los lugares
disponibles, instrucciones de envío, términos y condiciones, etc.
Français

Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis

en œuvre le programme Intel Product Recycling Program (Programme de recyclage
des produits Intel) pour permettre aux consommateurs de produits Intel de recycler
les produits usés en les retournant à des adresses spécifiées.

Visitez la page Web http://intel.com/intel/other/ehs/product_ecology pour en savoir

plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les
instructions d'expédition, les conditions générales, etc.

日本語

インテルでは、環境保護活動の一環として、使い終えたインテル ブランド製品を指定の場所へ返送していただき、リ
サイクルを適切に行えるよう、インテル製品リサイクル プログラムを発足させました。
対象製品、返送先、返送方法、ご利用規約など、このプログラムの詳細情報は、
http://intel.com/intel/other/ehs/product_ecology （英語）をご覧ください。

Malay

Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran,

Intel telah melaksanakan Program Kitar Semula Produk untuk membenarkan
pengguna-pengguna runcit produk jenama Intel memulangkan produk terguna ke
lokasi-lokasi terpilih untuk dikitarkan semula dengan betul.

Sila rujuk http://intel.com/intel/other/ehs/product_ecology untuk mendapatkan butir-

butir program ini, termasuklah skop produk yang dirangkumi, lokasi-lokasi tersedia,
arahan penghantaran, terma & syarat, dsb.

54
Downloaded from www.Manualslib.com manuals search engine
 Regulatory Compliance

Portuguese

Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o

Programa de Reciclagem de Produtos para que os consumidores finais possam enviar
produtos Intel usados para locais selecionados, onde esses produtos são reciclados de
maneira adequada.

Consulte o site http://intel.com/intel/other/ehs/product_ecology (em Inglês) para

obter os detalhes sobre este programa, inclusive o escopo dos produtos cobertos, os
locais disponíveis, as instruções de envio, os termos e condições, etc.

Russian
В качестве части своих обязательств к окружающей среде, в Intel создана
программа утилизации продукции Intel (Product Recycling Program) для
предоставления конечным пользователям марок продукции Intel возможности
возврата используемой продукции в специализированные пункты для должной
утилизации.

Пожалуйста, обратитесь на веб-сайт

http://intel.com/intel/other/ehs/product_ecology за информацией об этой
программе, принимаемых продуктах, местах приема, инструкциях об отправке,
положениях и условиях и т.д.

Türkçe

Intel, çevre sorumluluğuna bağımlılığının bir parçası olarak, perakende tüketicilerin

Intel markalı kullanılmış ürünlerini belirlenmiş merkezlere iade edip uygun şekilde geri
dönüştürmesini amaçlayan Intel Ürünleri Geri Dönüşüm Programı’nı uygulamaya
koymuştur.

Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve

şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen
http://intel.com/intel/other/ehs/product_ecology web sayfasına gidin.

55
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

China RoHS
Intel Desktop Board DN2800MT is a China RoHS-compliant product.

The China Ministry of Information Industry (MII) stipulates that a material Self
Declaration Table (SDT) must be included in a product’s user documentation. The SDT
for Intel Desktop Board DN2800MT is shown in Figure 16.

Figure 16. Intel Desktop Board DN2800MT China RoHS Material

Self Declaration Table

56
Downloaded from www.Manualslib.com manuals search engine
 Regulatory Compliance

EMC Regulations
Intel Desktop Board DN2800MT complies with the EMC regulations stated in Table 20
when correctly installed in a compatible host system.

Table 20. EMC Regulations

Regulation Title
FCC 47 CFR Part 15, Title 47 of the Code of Federal Regulations, Part 15, Subpart B,
Subpart B Radio Frequency Devices. (USA)
ICES-003 Interference-Causing Equipment Standard, Digital Apparatus.
(Canada)
EN55022 Limits and methods of measurement of Radio Interference
Characteristics of Information Technology Equipment. (European
Union)
EN55024 Information Technology Equipment – Immunity Characteristics
Limits and methods of measurement. (European Union)
EN55022 Australian Communications Authority, Standard for
Electromagnetic Compatibility. (Australia and New Zealand)
CISPR 22 Limits and methods of measurement of Radio Disturbance
Characteristics of Information Technology Equipment.
(International)
CISPR 24 Information Technology Equipment – Immunity Characteristics –
Limits and Methods of Measurement. (International)
VCCI V-3, V-4 Voluntary Control for Interference by Information Technology
Equipment. (Japan)
KN-22, KN-24 Korean Communications Commission – Framework Act on
Telecommunications and Radio Waves Act. (South Korea)
CNS 13438 Bureau of Standards, Metrology and Inspection. (Taiwan)

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124

1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to

57
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit other than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to the equipment not expressly approved by Intel
Corporation could void the user’s authority to operate the equipment.

Tested to comply with FCC standards for home or office use.

Canadian Department of Communications Compliance

Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.

Le présent appareil numerique német pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la classe B prescrites dans le
Réglement sur le broullage radioélectrique édicté par le ministére des Communications
du Canada.

Japan VCCI Statement

Japan Statement translation: This is a Class B product based on the standard of the
Voluntary Control Council for Interference from Information Technology Equipment
(VCCI). If this is used near a radio or television receiver in a domestic environment, it
may cause radio interference. Install and use the equipment according to the
instruction manual.

58
Downloaded from www.Manualslib.com manuals search engine
 Regulatory Compliance

Korea Class B Statement

Korea Class B Statement translation: This equipment is for home use, and has
acquired electromagnetic conformity registration, so it can be used not only in
residential areas, but also other areas.

Ensure Electromagnetic Compatibility (EMC)

Compliance
Before computer integration, make sure that the power supply and other modules or
peripherals, as applicable, have passed Class B EMC testing and are marked
accordingly.

Pay close attention to the following when reading the installation instructions for the
host chassis, power supply, and other modules:
• Product certifications or lack of certifications
• External I/O cable shielding and filtering
• Mounting, grounding, and bonding requirements
• Keying connectors when mating the wrong connectors could be hazardous
If the power supply and other modules or peripherals, as applicable, are not Class B
EMC compliant before integration, then EMC testing may be required on a
representative sample of the newly completed computer.

59
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

Product Certifications

Board-Level Certifications
Intel Desktop Board DN2800MT has the regulatory compliance marks shown in
Table 21.

Table 21. Regulatory Compliance Marks

Description Mark
UL joint US/Canada Recognized Component mark. Includes adjacent
UL file number for Intel Desktop Boards: E210882.

FCC Declaration of Conformity logo mark for Class B equipment.

CE mark. Declaring compliance to European Union (EU) EMC

directive, Low Voltage directive, and RoHS directive.

Australian Communications Authority (ACA) and New Zealand Radio

Spectrum Management (NZ RSM) C-tick mark. Includes adjacent
Intel supplier code number, N-232.

Japan VCCI (Voluntary Control Council for Interference) mark.

Korea Certification mark. Includes an adjacent KCC (Korean

Communications Commission) certification number:
KCC-REM-CPU-DN2800MT.

Taiwan BSMI (Bureau of Standards, Metrology and Inspections)

mark. Includes adjacent Intel company number, D33025.

Printed wiring board manufacturer’s recognition mark. Consists of a V-0

unique UL recognized manufacturer’s logo, along with a flammability
rating (solder side).
China RoHS/Environmentally Friendly Use Period Logo: This is an
example of the symbol used on Intel Desktop Boards and associated
collateral. The color of the mark may vary depending upon the
application. The Environmental Friendly Usage Period (EFUP) for
Intel Desktop Boards has been determined to be 10 years.

60
Downloaded from www.Manualslib.com manuals search engine
 Regulatory Compliance

Chassis- and Component-Level Certifications

Ensure that the chassis and certain components; such as the power supply, peripheral
drives, wiring, and cables; are components certified for the country or market where
used. Agency certification marks on the product are proof of certification. Typical
product certifications include:

In Europe
The CE mark indicates compliance with all applicable European requirements. If the
chassis and other components are not properly CE marked, a supplier’s Declaration of
Conformity statement to the European EMC directive, Low Voltage directive (as
applicable), and ROHS directive, should be obtained. Additionally, other directives,
such as the Radio and Telecommunications Terminal Equipment (R&TTE) directive may
also apply depending on product features.
In the United States
A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL,
CSA, or ETL signifies compliance with safety requirements. Wiring and cables must
also be UL listed or recognized and suitable for the intended use. The FCC Class B
logo for home or office use signifies compliance with electromagnetic interference
(EMI) requirements.

In Canada
A nationally recognized certification mark such as CSA or cUL signifies compliance with
safety requirements. The Industry Canada statement at the front of this product guide
demonstrates compliance with Canadian EMC regulations.

ENERGY STAR*, e-Standby, and ErP

Compliance
The US Department of Energy and the US Environmental Protection Agency have
continually revised the ENERGY STAR requirements. Intel has worked directly with
these two governmental agencies in the definition of the new requirements. This
Desktop Board meets the ENERGY STAR Program for Computers: Version 5.0 Category
A requirements.
For information about ENERGY STAR requirements and recommended configurations,
go to http://www.intel.com/go/energystar.

The Desktop Board also meets the following international requirements:

• Republic of Korea e-Standby program
• European Union Energy using Products (ErP) Lot 6 directive

61
Downloaded from www.Manualslib.com manuals search engine
 Intel Desktop Board DN2800MT Product Guide

62
Downloaded from www.Manualslib.com manuals search engine