12/12/24, 12:49 PM Coating Calculations (The Math) - Paint Formula

Coating Calculations - Painting Guide

Paint Consumption Calculations

Getting the basics right for field paint inspectors... (Part 1) Useful
Formulas

The first thing you'll need to do is determine the surface area of the area you'll be painting. To do
this, you'll need to measure the length and width of the area (in feet), and then multiply those two
numbers together. This will give you the square footage of the area.

Once you have the surface area, you'll need to decide on the coverage of the paint. Most paints will
cover about 200 square feet per gallon. However, if you're painting over a dark color or stains, you
may need to use a primer first, which will lower the coverage. If you're unsure, always check the
coverage on the paint can before buying.

Once you know the surface area and the coverage, you can calculate the amount of paint you'll
need. Simply divide the surface area by the coverage to get the number of gallons you'll need. For
example, if you're painting a 10x10 room with a coverage of 200 square feet per gallon, you'll need
0.5 gallons of paint (10x10/200=0.5).

Now that you know how to calculate the amount of paint you'll need, don't forget to factor in other
supplies like painter's tape, drop cloths, sandpaper, and brushes. And always remember to buy a
little extra paint, just in case.Paint consumption on protective coating projects can vary between 20-
40% of the entire contract cost. The complexity of the works, general logistics, methods of access
and containment, methods of preparation and type of coating system to be used including the final
required wet film thickness calculation to achieve the desired dry film thickness will dictate the
overall costs (wft to dft calculation).

https://www.onropes.co.uk/coating-calculations 1/5
12/12/24, 12:49 PM Coating Calculations (The Math) - Paint Formula

Calculating paint consumption quantities correctly can be extremely important, especially in certain
locations such as offshore maintenance environments, where additional deliveries can be a
problem. Some products also have long lead times and ensuring the correct amount of paint is
available can be the difference between finishing a contract on time and running over into critical
paths.

Furthermore, delivery of too much paint can have commercial implications due to transport costs,
general logistics and handling and returning specialist products and/or special (non-standard)
colours.

This blog post is designed to provide an understanding of the arithmetic used throughout the
coating industry in coating thickness calculations. You will also find some basic conversions,
definitions and calculations for surface areas.

Starting with expendable abrasive materials, the amount of abrasive to be used on a blasting
project varies tremendously between contracts however we can build certain matrix models on
historical work experiences, which is where this blog post is derived from. The abrasive range in
industrial and marine applications is generally;

20-75 kilo/m2 depending on the surface condition and required specification or standard.
Abrasive blasting is an operation where surface material is removed by using a high-pressure jet of
abrasive particles. The abrasive particles can be made of various materials, including sand, glass
beads, steel shot, and aluminum oxide. Abrasive blasting is often used to remove paint or rust from
metal surfaces, and can also be used to prepare surfaces for painting or other coatings.
Abrasive blasting can be performed using several different types of equipment, including hand-held
sandblasters, cabinet sandblasters, and automated blast rooms. The type of equipment used will
depend on the size and type of surface being cleaned, as well as the desired results.
Abrasive blasting is a safe and effective way to clean or prepare surfaces for painting or other
coatings. When performed properly, it will not damage the underlying substrate. Abrasive blasting is
an important part of the surface preparation process and should be done by trained and
experienced personnel.

Coating Thickness Calculation

Coating thickness calculation is a crucial aspect of various industries, such as automotive,
aerospace, and construction. It involves determining the thickness of coatings applied to different
surfaces, which is essential for ensuring the durability, performance, and quality of the finished
product.

Coating thickness calculation plays a vital role in the automotive industry, where it is necessary to
measure the thickness of paint coatings on vehicles. This measurement helps ensure that the paint
provides adequate protection against corrosion and environmental factors, while also enhancing
the vehicle's appearance. By accurately calculating the coating thickness, manufacturers can meet
industry standards and customer expectations.

In the aerospace industry, coating thickness calculation is equally important. Aircraft require
protective coatings to withstand extreme weather conditions, prevent corrosion, and maintain
structural integrity. By accurately calculating the coating thickness, aerospace engineers can
ensure that the aircraft components are adequately protected and meet safety regulations.

The construction industry also relies on coating thickness calculation to ensure the durability and
longevity of various structures. Coatings are applied to surfaces such as concrete, steel, and wood
to protect them from moisture, UV radiation, and other detrimental factors. By accurately
calculating the coating thickness, construction professionals can ensure that the coatings provide
adequate protection and extend the lifespan of buildings, bridges, and other important
infrastructure.
https://www.onropes.co.uk/coating-calculations 2/5
12/12/24, 12:49 PM Coating Calculations (The Math) - Paint Formula

There are various methods for coating thickness calculation, including destructive and non-
destructive techniques. Destructive methods involve removing a sample of the coating and
measuring its thickness using specialised equipment. Non-destructive methods, on the other hand,
allow for the measurement of coating thickness without damaging the surface. These methods
include magnetic induction, eddy current, and ultrasonic testing.

In conclusion, coating thickness calculation is a fundamental aspect of many industries, including

automotive, aerospace, and construction. Accurately measuring the thickness of coatings ensures
the durability, performance, and quality of finished products. Whether it's protecting vehicles from
corrosion, ensuring aircraft components are adequately shielded, or extending the lifespan of
buildings, coating thickness calculation plays a crucial role in maintaining the integrity of various
surfaces and structures. With the use of both destructive and non-destructive methods, industries
can confidently rely on accurate coating thickness calculations to meet industry standards and
customer expectations.

Wet Film Thickness (WFT)

In order to achieve a calculated wet film thickness we must take the desired dry film thickness
(DFT) first and reverse engineer. So a DFT of 90 microns using a paint with a volume solid (VS) of
60% we would calculate the following to find the WFT;

WFT = 100 x DFT / VS (WFT = 100 x 90 / 60) therefore giving us 150 microns as the Wet Film
Thickness (WFT).

Dry Film Thickness (DFT)

When the required calculation is in reverse and you are looking to obtain the dry film thickness
(DFT) the following formula applies;

WFT x VS / 100 = DFT so using the same numbers as we did above working out the wet film
thickness the equation looks like this (150 x 60 / 100) = 90 microns DFT).

Volume Solids (VS)

Dry Film Thickness / Wet Film Thickness x 100 = Volume Solid shown as a percentage (%) again
using the above numbers it would be as follows;

90 DFT / 150 WFT x 100 = 60% VS.

Theoretical Spreading Rate (TSR)

https://www.onropes.co.uk/coating-calculations 3/5
12/12/24, 12:49 PM Coating Calculations (The Math) - Paint Formula

m2 per ltr = 10 x VS(%) / DFT in microns. Using the above numbers we can estimate the following
outcome;

10 x 60% / 90 = 0.06 m2 per ltr of paint.

Practical Spreading Rate (PSR)

TSR x (100% - wastage%) = PSR. For this example we will again use the aforementioned numbers
above;

0.06 x (100% - 20%) = 0.048 m2 per ltr of paint.

Calculating Paint Quantities

Flat Steel Plate

If the surface to be painted is 10 meters in linear length and 3 meters wide, then the area can be
simply determined by multiplying the length by the width (10 x 3 = 30m2). If both sides were to be
coated the surface area would be doubled if both sides were identical metrics.

Assuming a theoretical spreading rate (TSR) of 5m2 per litre of paint then 12ltrs of paint would be
required to cover both sides (30 / 5 x 2 = 12). However using the practical spreading rate we have
learned above (PSR) and taking into account approximately 20% paint wastage, the practical
coverage will be reduced to 4m2 per litre (5 x 0.8 = 4).

Therefore using PSR we can determine the paint requirement for coating a flat plate as described
above would require 15 litres of paint (30 / 4 x 2 = 15).

In our next blog post on coating calculations part 2 we will look at more complex shapes and how
to calculate their surface areas accurately, such as;

I -Beams (primary and secondary steel)

Cylinders (storage tanks or wind turbine tower sections)

Pipes and Pipelines

About Dangle Rope Access

Here at Dangle Rope Access, we provide a variety of comprehensive inspection, access, coatings,
and composite (IACC) industrial services. Our services are available to both the private and public
sectors.

We offer high-quality proven solutions that will help reduce maintenance costs in both the long and
short-term. We are based in Dundee, Scotland and also have offices based in Edinburgh, along
https://www.onropes.co.uk/coating-calculations 4/5
12/12/24, 12:49 PM Coating Calculations (The Math) - Paint Formula

with our newly established training centre in Northern Ireland Dangle Academy. Due to our
company size and structure, we are able to offer a flexible and versatile approach to the way we
run our business and the services that we offer our clients. And, as a leading painting company,
we’ve worked on several renewable energy projects in the UK, Europe, and the US.

We work with both on and offshore with wind farm operators, and asset owners. For offshore wind
farm maintenance, to onshore building maintenance, we can cover both the East and West coasts.

To find out more about how our team can help you contact us today. Our friendly, professional
and helpful team is always on hand to help.

Dry Film Thickness

Wet Film Thickness

https://www.onropes.co.uk/coating-calculations 5/5