Scribd
Upload
27 views4 pages

Smart Dual Light Camera

The iLumax Dual Light HD Camera offers three light modes: Smart IR&WL, WL mode, and IR mode, which can be configured via the OSD menu. In Smart IR&WL mode, the camera automatically switches between IR and full color based on motion detection. Users must enable 'Smart Illumination' in the DVR settings for optimal functionality, and firmware upgrades may be necessary for compatibility with certain DVRs.

Uploaded by

spinfotech2019
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views4 pages

Smart Dual Light Camera

The iLumax Dual Light HD Camera offers three light modes: Smart IR&WL, WL mode, and IR mode, which can be configured via the OSD menu. In Smart IR&WL mode, the camera automatically switches between IR and full color based on motion detection. Users must enable 'Smart Illumination' in the DVR settings for optimal functionality, and firmware upgrades may be necessary for compatibility with certain DVRs.

Uploaded by

spinfotech2019
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

i llumax D ual li ght HD

Came ra
Operatio nal Ma nu
al

Version 1.0 .1
1. Dual Light Camera Configuration

Dual Light camera supports three light modes: Smart IR&WL, WL mode, IR mode.On the OSD menu, select
Illuminator, and then view the three different modes.
• Smart IR&WL – If the camera is connected with AI DVR, and SMD is enabled in DVR,
then the Warm light get activated once the motion is detected, by default camera will
be in IR mode once motion is detected, SMD gets triggered, and camera will enable
the full color mode automatically. Once the camera detected that motion is not
happening it will automatically switch back to IR mode.
• WL mode: If user want to set the camera in Full color mode, then you have to keep
the camera in WL mode.
• IR mode: if user want to set the camera in black and white mode then need to keep
the camera in IR mode.
Figure 1-1 Smart IR&WL
Figure 1-2 WL mode

Figure 2-3 IR mode


2. Settings in DVR

Process: In the SMD option of DVR, click on More option, there you have to enable “Smart
Illumination” while keeping camera at SMART IR&WL mode.

If any of the below DVR is not working with dual light camera then please upgrade your
DVR firmware by below firmware’s.

You might also like