INDEX
1. AIM
2. APPARATUS REQUIRED
3. INTRODUCTION
4. DIAGRAM
5. THEORY
6. PROCEDURE
7. OBSERVATIONS
8. CALCULATIONS
9. RESULT
10. PRECAUTIONS
11. SOURCES OF ERROR
12. BIBLIOGRAPHY
13. THANK YOU
INTRODUCTION
In optics, the refractive index or index of refraction n of a material is a
dimensionless number that describes how light propagates through that
medium. It is defined as
Where c is the speed of light in vacuum and v is the phase velocity of light in
the medium. For example, the refractive index of water is 1.333; meaning
that light travels 1.333 times faster in a vacuum than it does in water.
AIM
To find the refractive indexes of (a) water (b) oil using a plane mirror,
an equi-convex lens, and an adjustable object needle.
APPARATUS
✓ Convex Lens
✓ Plane Mirror
✓ Water
✓ Oil
✓ Clamp Stand
✓ An Optical Needle
✓ Plumb Line
✓ Knitting Needle
✓ Half Meter Scale
✓ Glass Slab
✓ Spherometer
DIAGRAM
THEORY
1. If f1 and f2 be the focal length of the glass convex
lens and liquid lens and f be the focal length of their
combination then:-
or f
2. Liquid lens formed a Plano-concave Lens with R1=R
and R2=∞ then by using lens make’s formula
n=
Where n = Refractive index of the liquid
R = the radius of the curvature of the convex lens.
3. The radius of the lower surface of the convex lens is
given by:
R=
Here, l is the average distance between the legs of the
spherometer and h is the difference in the reading of
the spherometer when placed first on the convex lens
and then on plane mirror.
PROCEDURE
(a) For focal length of convex lens:
1. Find the rough focal length of the convex lens.
2. Place a plane mirror on the horizontal base of the iron
stand and then a convex lens on the plane mirror.
3. Hold the needle in the clamp stand and adjust its
position on the stand such that there is no parallax
between tip of the needle and its image.
4. Measure distance between tip and upper surface of
the lens by using a plumb line and half meter scale.
Also measure the distance between tip of needle and
upper surface of the mirror. Take the mean of the two
readings. This means distance will be equal to the
focal length of the convex lens (f1).
(b) For focal length of the combination.
5. Put a few drops of the water on the plane mirror and
put the convex lens over it with its same face above as
before. The water spreads in a form of layer and acts
like a Plano-concave lens.
6. Repeat the steps 3 and 4 to determine the equivalent
focal length of the combination.
7. Record the observation.
8. Repeat the steps 5, 6, 7 for other transparent liquid
(oil).
(c) For radius of curvature of convex lens surface:
9. Determine the pitch and the least count of the
spherometer.
10. Remove the convex lens and dry it completely. Put
the spherometer on this lens surface.
11. All the three legs of the spherometer should be
placed symmetrically on the lens and adjust the
central screw tip to touch the surface of the lens.
12. Remove the spherometer from the surface of the
lens and place on the plane mirror surface and
record the reading.
13. Repeat the steps 10 and 11 three times.
14. Obtain the impressions of the three legs of the
spherometer on a paper and mark them and their
average distance.
l=
OBSERVATIONS
Pitch of the spherometer= 1 cm Least
count of the spherometer = 0.01 cm
Distance between the legs:
(1) AB = 3 cm
(2) BC = 3 cm
(3) CA = 3 cm
Table for calculation of ‘h’
S.No Initial reading No. of Final Additional h=n x Mean
of the C.S. on complete reading of C.S div. pitch “h”
the convex rotations the c.s on moved + m x (cm)
lens the glass L.C
(a) (n) slab
1 62 0 6.5 55.5 0.555 0.5775
2 64 0 4 60 0.6
To measure focal length ‘f’ of convex lens
Distance of needle tip from
Area S.No Tip of the upper Upper Focal
between surface of the surface of Mean Length
lens and convex lens(cm) the plane (cm)
x=
plane mirror X1 mirror(cm)
X2
Without 1 30.5 31 30.75 f1=
liquid 33.85
2 36.7 37.2 36.95
With water 1 31.4 31.8 31.6 f2=34.7
2 37.5 38.1 37.8
With oil 1 9.4 9.6 9.5 f3=10
2 10.4 10.6 10.5
CALCULATIONS
Mean distance between two legs
3 cm
cm
To find the radius of curvature of the convex lens:
Measurement of refractive indices of water and oil
1) With water between the convex lens and the plane mirror:
2) With oil between the convex lens and the plane Mirror
Results
The refractive index of water is µ1 = 1.0831
The refractive index of oil is µ2 = 1.2886
PRECAUTIONS
1. The plane mirror should be clean and fully shining
surface.
2. The liquid taken should be transparent.
3. The parallax should be removed tip to tip.
4. The eye should be at a distance about 30 cm from the
needle while removing the parallax.
5. Only few drops of liquid should be taken so that its
layer should be thick.
6. The legs of the spherometer should be vertical.
7. The centre leg of the spherometer should turn in one
direction only.
SOURCES OF ERROR
1. Liquid may not be quite transparent.
2. The parallax may not be fully removed.
3. The spherometer legs should be placed symmetrical
on the surface of the convex lens.
4. The tip of the central screw should not just touch the
surface of lens or mirror.
BLIOGRAPHY
❖ HELP FROM INTERNET
❖ HELP FROM TEACHERS
❖ NCERT TEXTBOOKS
❖ NCERT PHYSICS LAB
MANUAL
❖ www.google.com
❖ www.wikipedia.com
❖ www.pinterest.com
