MS/Standard

MS-E/F

MS-E & F
MS Class F connectors satisfy all the performance
requirements of MIL-DTL-5015. Class E, environmental
is also produced, but is no longer listed on the qualified
products listing (QPL). These connectors are recom-
mended for conditions where vibration, moisture, pres-
sure and/or temperature are extreme. Strain relief is
supplied on most shell sizes.

wall mounting receptacle Shells:

Shell components are fabricated from high grade alumi-
num alloy. The standard hardware plating is electrically
conductive cadmium plated finish with an olive drab chro-
mate after-treatment for corrosion resistance. Consult
Amphenol, Sidney, NY for other plating options.
Contacts:
Contacts are silver plated copper alloy for maximum cor-
rosion resistance, maximum current carrying capacity
cable connecting plug and low millivolt drop. Size 16 and 12 socket contacts
incorporate a closed entry design. Crimp and solder ver-
sions are available. Refer to pages 49, 67 and 68 for
additional contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, high dielectric strength, and resistance to
vibration. Either pin or socket insert can be pressurized.
Strain Relief Clamp:
box mounting receptacle
Strain relief clamps minimize tension at the solder well
connection and provide a positive mechanical moisture
seal. Complete field serviceability is possible with the
strain relief clamp.

straight plug

90 degree plug

10
MS/Standard
MS3101E/F
cable connecting plug

A Thread

XX J

B
Z

To complete order number, see “how to order” pg. 70.

For solder well data, see page 67.

B XX
A Min. Min.
Shell Thread Full J L Z* Cable
Size Class 2A Thread Max. Max. Max. Clearance
10SL .6250-24UNEF .406 .896 2.129 1.134 .281
12S .7500-20UNEF .422 .896 2.129 1.134 .281
12 .7500-20UNEF .656 .896 2.129 1.572 .281
14S .8750-20UNEF .391 1.021 2.201 1.134 .406
14 .8750-20UNEF .625 1.021 2.524 1.572 .406
16S 1.0000-20UNEF .391 1.151 2.201 1.134 .500
16 1.0000-20UNEF .625 1.151 2.524 1.572 .500
18 1.1250-18UNEF .625 1.242 2.596 1.572 .531
20 1.2500-18UNEF .625 1.499 2.654 1.572 .656
22 1.3750-18UNEF .625 1.499 2.654 1.572 .740
24 1.5000-18UNEF .625 1.781 2.885 1.572 .781
28 1.7500-18UNS .625 1.781 2.885 1.572 .922
32 2.0000-18UNS .625 2.087 2.943 1.572 1.156
36 2.2500-16UN .625 2.281 2.943 1.572 1.250
40 2.5000-16UN .625 2.581 3.068 1.572 1.562
* Increase Z dimension by .312 for size “0” contact only.

12
MS/Standard
MS3106E/F
straight plug

L Q

Z B

A
Thread

J XX

To complete order number, see “how to order” pg. 70.

For solder well data, see page 67.
All lockwire holes are .045 dia. min.

XX
A Min.
Shell Thread B J L Q Z* Cable
Size Class 2A ±.005 Max. Max. Max. ±.045 Clearance
10SL .6250-24UNEF .531 .896 2.129 .946 .607 .281
12S .7500-20UNEF .531 .896 2.129 .995 .607 .281
12 .7500-20UNEF .719 .896 2.129 .995 .857 .281
14S .8750-20UNEF .531 1.021 2.201 1.123 .607 .406
14 .8750-20UNEF .719 1.021 2.524 1.123 .857 .406
16S 1.0000-20UNEF .531 1.151 2.201 1.250 .607 .500
16 1.0000-20UNEF .719 1.151 2.524 1.250 .857 .500
18 1.1250-18UNEF .719 1.242 2.596 1.333 .857 .531
20 1.2500-18UNEF .719 1.499 2.654 1.461 .857 .656
22 1.3750-18UNEF .719 1.499 2.654 1.588 .857 .740
24 1.5000-18UNEF .719 1.781 2.885 1.715 .857 .781
28 1.7500-18UNS .719 1.781 2.885 1.968 .857 .922
32 2.0000-18UNS .719 2.087 2.943 2.209 .857 1.156
36 2.2500-16UN .719 2.281 2.943 2.463 .857 1.250
40 2.5000-16UN .719 2.581 3.068 2.718 .857 1.562
* Increase Z dimension by .312 for size “0” contact only.

14