Scribd
Upload
6 views

Router Tutorial

routing protocal

Uploaded by

abhijit99541623974426
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
6 views

Router Tutorial

routing protocal

Uploaded by

abhijit99541623974426
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

Router>

Router>en
Router#config t
Router#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to


up

Router(config-if)#int fa0/1
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to


up

Router(config-if)#
Router(config-if)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console

Router#wr
Building configuration...
[OK]

Router#sh ip int br
Interface IP-Address OK? Method Status Protocol

FastEthernet0/0 192.168.1.1 YES manual up up

FastEthernet0/1 192.168.2.1 YES manual up up

Vlan1 unassigned YES unset administratively down down


Router#

You might also like