PROGRAM Automotive Programming Course CEA
Uploaded by
ScribdTranslationsPROGRAM Automotive Programming Course CEA
Uploaded by
ScribdTranslationsSoftware
INMOCODE
SPACIG m
WHAT IS
INMOCODE?
READINGOROPINION \\
IO1010101010101010110M
IIOOIOIOIOIOIIOIIOIOOIOIIO
IOIIIIIIARCHIVESVIRGENE
IIOIOIOIOOIOIIOIIOIOIOIIOO
INMOOOFFOOIOIOIOIIOOIIO
PROGRAM AUTOMOTIVE PROGRAMMING TRAINING 1
AUTOMOTIVE RRR
EE
PROGRAMMING E
program
course level s intermediate s advanced
initial expert
What is the course about?
The course is aimed at technicians who wish to acquire specific knowledge of the
programming methods for memories and microcontrollers used in the modules that
electronically control the functions of the car.
Who is it for?
Aimed at workshops or specialized technicians who wish to incorporate knowledge about
programming methods for modules that control automobile functions and who wish to meet
the following objectives:
Goals
Recognize the different components that can be worked on to reprogram an electronic
module. Recognize the different architectures of the modules to understand the
reprogramming methodologies used in different cases.
Recognize the applications and scope that can be given to module reprogramming work, as
well as the need for it to make adjustments and/or calibrations.
Recognize examples of application of reprogramming work for all types of modules.
PROGRAM AUTOMOTIVE PROGRAMMING TRAINING 2
SYLLABUS
STAGE 1
MEMORIES AND MICROCONTROLLERS
Hardware
- Global module identification.
- ENGINE ECU, INSTRUMENT PANEL, BODY, BCM, INMOBOX, AIRBAG, STEREO, etc.
- Internal architecture control areas.
Types of Hardware
- Types of memory, eeprom, eprom, flash, and their characteristics.
- Microprocessors, microcontrollers, features and types of security.
- Types of encapsulations.
Software
- Architecture and Planning.
- Digital Logic.
- Information Storage.
- Storage capacity calculations.
Tools
- Types of Tools to use.
- Recognition of Universal Programmers.
- (JTAG SMOK, ORANGE, X-PROG, CARPROG, GQ-4X, UPA / UPA-S, VVDIprog, etc.).
- Comprehensive platform recognition.
- Software Care, Recommendations and Treatments.
- READING and PROGRAMMING.
- Chip extraction, In Circuit methodology.
- Examples and applications, Practices in Automotive modules of all types.
- FEATURES AND EXPLANATIONS FOR EACH CASE.
PROGRAM AUTOMOTIVE PROGRAMMING TRAINING 3
STAGE 2
READING AND PROGRAMMING ECU
CALCULATORS
Hardware and Software
- Structural analysis of the characteristic hardware of an ECU.
- Typical Hardware Architectures.
- Software Ordering.
Tools
- Types of Tools to use.
- Automotive Specific Programmers.
- Comprehensive platform recognition.
- (NEW TRASDATA, NEW GENIUS), KTAG, KESS, FG-TECH GALLETO 4.
- Care and Recommendations.
Reading and Programming Techniques
- BOOT mode.
- BDM mode.
- JTAG mode.
- MPC JTAG mode.
- NEC NBD mode.
- SSW mode.
- E-GPT mode.
- OBD mode.
- Features and Explanations for each case.
PROGRAM AUTOMOTIVE PROGRAMMING TRAINING 4
STAGE 3
AUTOMOTIVE IMMOBILIZER SYSTEM
Special Bases and Foundations
Electronic Circuits Theory
- Resonant Circuit Concept.
- Automotive Application.
- Transponder technology.
- Explanation of FSK and ASK Systems, Digitalization of Signals, AM and FM.
- Types of Transponder Technologies (MEGAMOS, HITAG, TEXAS, ROLLING-CODE
PCF7935).
- Module Architecture. Explanation and electronic operation as a whole.
- Different Types of Security System Loops.
- Software Structures Immobilizer Memories, Microprocessors, Combined Systems,
Software Encryption.
- Security Accesses.
- Access Types and Service Modes Global Explanation.
- Operation by Brand PSA Group / VAG GROUP / FORD / CHEVROLET / RENAULT /
FIAT, etc.
PROGRAM AUTOMOTIVE PROGRAMMING TRAINING 5
PROGRAM AUTOMOTIVE PROGRAMMING TRAINING 6
@©)CEAl AUTOMOTIVE
ELECTRONICS
Av. Bruix 4677 / CABA
011 3533 8914 / WSP 11 3230 2978
[email protected]
www.ceaelectronica.com
a training space
www.ceacapacitacion.com
