Ericsson - CONFIGURATION

INSTRUCTION 1 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Send Script Transport RBS6000

 Ericsson - CONFIGURATION
INSTRUCTION 2 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Autors:

Review Date Autor Description Reviewed by

Send Script Transport whit EMAS

PA1 10/02/2017 Marco Maggini Luana De Bortoli
Tools
 Ericsson - CONFIGURATION
INSTRUCTION 3 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

To Make the RBS reachable to remote we must to load the following script:

Save the script in your PC.

 Ericsson - CONFIGURATION
INSTRUCTION 4 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Connect to RBS whith EMAS tool:

 Ericsson - CONFIGURATION
INSTRUCTION 5 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Select Upgrade and Backup CV and select Initial CV:

 Ericsson - CONFIGURATION
INSTRUCTION 6 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Now Click right key the mouse and select reload with this CV:
 Ericsson - CONFIGURATION
INSTRUCTION 7 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Now select restar_warm in the restartRank

Planned_reconfiguration in the restartReason

And click execute.

Wait about 3 minutes

 Ericsson - CONFIGURATION
INSTRUCTION 8 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Now Send the script of the transport

Select “Tools” than “Run Command File”

 Ericsson - CONFIGURATION
INSTRUCTION 9 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Select the Script present on your PC

 Ericsson - CONFIGURATION
INSTRUCTION 10 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

And select “start”

 Ericsson - CONFIGURATION
INSTRUCTION 11 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

check if the running of the script is "succeeded"

 Ericsson - CONFIGURATION
INSTRUCTION 12 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Create a new CV “Post_ Activity

Select “Upgrade and Backup”:

 Ericsson - CONFIGURATION
INSTRUCTION 13 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Select CV than Create CV:

 Ericsson - CONFIGURATION
INSTRUCTION 14 (14)
Prepared (also subject responsible if other) No.

Marco Maggini
Approved Checked Date Rev Reference

Luana De Bortoli 10-05-2017 PA1

Create the CV selecting “Execute”:

After that it is better to take a backup CV in your PC via filezila on path d\configuration\cv