Scribd
Upload
13 views3 pages

First Test

The document contains three sets of questions for a Class Test on topics related to signal processing, including Fourier components, sampling frequencies, and basis functions. Each set consists of multiple-choice questions with specific conditions for scoring correct and incorrect answers. The questions cover concepts such as binary PCM voice transmission, Fourier transforms, and periodic square wave signals.

Uploaded by

longreanjali1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views3 pages

First Test

The document contains three sets of questions for a Class Test on topics related to signal processing, including Fourier components, sampling frequencies, and basis functions. Each set consists of multiple-choice questions with specific conditions for scoring correct and incorrect answers. The questions cover concepts such as binary PCM voice transmission, Fourier transforms, and periodic square wave signals.

Uploaded by

longreanjali1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SET A

Class Test -I
Name: Roll Number Section
NOTE: Attempt ALL Questions. For wrong answer 1 marks will be detected. For each correct
answer 3 marks will be awarded.
Q1. The Fourier components of the periodic square wave signal shown below is

4𝐴 𝑛𝜋 4𝐴 𝑛𝜋
i. 𝑎0 = 0, 𝑎𝑛 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑏𝑛 = 0 ii. 𝑎0 = 0, 𝑏𝑛 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑎𝑛 = 0
4𝐴 𝑛𝜋
iii. 𝑎𝑛 = 0, 𝑎0 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑏𝑛 = 0 iv. None of above

Q2. If the signal 𝑚(𝑡) = 5𝐶𝑜𝑠[4000𝜋𝑡]𝐶𝑜𝑠[2000𝜋𝑡] is sampled at Nyquist rate, then the sampling
frequency and sampling rate will be
i. 𝑓𝑠 = 8000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠 ii. 𝑓𝑠 = 4000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠
iii. 𝑓𝑠 = 6000𝐻𝑧, 𝑇𝑠 = 0.16𝑚𝑠 iv. 𝑓𝑠 = 6000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠
Q3. For the set of signals shown below the basis functions are

i. ∅1 (𝑡) = 1 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3


1
ii. ∅1 (𝑡) = 1 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2
1
iii. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2
1 1
iv. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2 √2

Q4. In binary PCM voice transmission, the bit rate is 36000 bits per second. If 𝑓𝑚 = 3.2𝐾𝐻𝑧 then the
sampling frequency and the binary digit used to encode each sample is
i. 6.4KHz, 5 ii. 7.2KHz, 6 iii. 6.4KHz, 6 iv. 7.2KHz, 5

Q5. The Fourier transform of 𝑥(𝑡) = 𝑒 −𝑎|𝑡| 𝑎 > 0 is


𝑎 4𝑎 2𝑎 𝑎
i. ii. iii. iv.
2(𝑎2 +𝜔 2 ) 𝑎2 +𝜔2 𝑎2 +𝜔2 𝑎2 +𝜔 2
SET B
Class Test -I
Name: Roll Number Section
NOTE: Attempt ALL Questions. For wrong answer 1 marks will be detected. For each correct
answer 3 marks will be awarded.
Q1. In binary PCM voice transmission, the bit rate is 36000 bits per second. If 𝑓𝑚 = 3.2𝐾𝐻𝑧 then the
sampling frequency and the binary digit used to encode each sample is
i. 6.4KHz, 5 ii. 7.2KHz, 6 iii. 6.4KHz, 6 iv. 7.2KHz, 5

Q2. The Fourier transform of 𝑥(𝑡) = 𝑒 −𝑎|𝑡| 𝑎 > 0 is


𝑎 4𝑎 2𝑎 𝑎
i. ii. iii. 𝑎2 +𝜔2 iv. 𝑎2+𝜔2
2(𝑎2 +𝜔 2 ) 𝑎2 +𝜔2

Q3. For the set of signals shown below the basis functions are

1 1
i. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2 √2
1
ii. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2
iii. ∅1 (𝑡) = 1 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
1
iv. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2

Q4. The Fourier components of the periodic square wave signal shown below is

4𝐴 𝑛𝜋 4𝐴 𝑛𝜋
i. 𝑎0 = 0, 𝑎𝑛 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑏𝑛 = 0 ii. 𝑎0 = 0, 𝑏𝑛 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑎𝑛 = 0
4𝐴 𝑛𝜋
iii. 𝑎𝑛 = 0, 𝑎0 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑏𝑛 = 0 iv. None of above

Q5. If the signal 𝑚(𝑡) = 5𝐶𝑜𝑠[4000𝜋𝑡]𝐶𝑜𝑠[2000𝜋𝑡] is sampled at Nyquist rate, then the sampling
frequency and sampling rate will be
i. 𝑓𝑠 = 8000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠 ii. 𝑓𝑠 = 4000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠
iii. 𝑓𝑠 = 6000𝐻𝑧, 𝑇𝑠 = 0.16𝑚𝑠 iv. 𝑓𝑠 = 6000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠
SET C
Class Test -I
Name: Roll Number Section
NOTE: Attempt ALL Questions. For wrong answer 1 marks will be detected. For each correct
answer 3 marks will be awarded.
Q1. In binary PCM voice transmission, the bit rate is 36000 bits per second. If 𝑓𝑚 = 3.2𝐾𝐻𝑧 then the
sampling frequency and the binary digit used to encode each sample is
i. 6.4KHz, 6 ii. 7.2KHz, 5 iii. 6.4KHz, 5 iv. 7.2KHz, 6

Q2. The Fourier transform of 𝑥(𝑡) = 𝑒 −𝑎|𝑡| 𝑎 > 0 is


𝑎 4𝑎 𝑎 2𝑎
i. ii. iii. 𝑎2 +𝜔2 iv. 𝑎2+𝜔2
2(𝑎2 +𝜔 2 ) 𝑎2 +𝜔2

Q3. For the set of signals shown below the basis functions are

1
i. ∅1 (𝑡) = 1 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2
1 1
ii. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2 √2
iii. ∅1 (𝑡) = 1 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 1, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
1
iv. ∅1 (𝑡) = 𝑓𝑜𝑟 0 ≤ 𝑡 ≤ 2, ∅2 (𝑡) = 1 𝑓𝑜𝑟 2 ≤ 𝑡 ≤ 3
√2

Q4. The Fourier components of the periodic square wave signal shown below is

4𝐴 𝑛𝜋 4𝐴 𝑛𝜋
i. 𝑎𝑛 = 0, 𝑎0 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑏𝑛 = 0 ii. 𝑎0 = 0, 𝑏𝑛 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑎𝑛 = 0
4𝐴 𝑛𝜋
iii. 𝑎0 = 0, 𝑎𝑛 = 𝑛𝜋 𝑆𝑖𝑛 ( 2 ) , 𝑏𝑛 = 0 iv. None of above

Q5. If the signal 𝑚(𝑡) = 5𝐶𝑜𝑠[4000𝜋𝑡]𝐶𝑜𝑠[2000𝜋𝑡] is sampled at Nyquist rate, then the sampling
frequency and sampling rate will be
i. 𝑓𝑠 = 8000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠 ii. 𝑓𝑠 = 4000𝐻𝑧, 𝑇𝑠 = 0.16𝑚𝑠
iii. 𝑓𝑠 = 6000𝐻𝑧, 𝑇𝑠 = 0.25𝑚𝑠 iv. 𝑓𝑠 = 6000𝐻𝑧, 𝑇𝑠 = 0.16𝑚𝑠

You might also like