Scribd
Upload
2 views1 page

Tutorial5_Sequential

The document outlines the tutorial sheet for ECE-101, focusing on sequential circuits, state diagrams, registers, and counters. It includes instructions for students to prepare for the tutorial class and presents two main questions related to PN flip-flops and state table derivation. The tutorial is scheduled for October 31, 2023, and is led by Professors U. Dey and P. Kaurav.

Uploaded by

ttyhqh5z68
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views1 page

Tutorial5_Sequential

The document outlines the tutorial sheet for ECE-101, focusing on sequential circuits, state diagrams, registers, and counters. It includes instructions for students to prepare for the tutorial class and presents two main questions related to PN flip-flops and state table derivation. The tutorial is scheduled for October 31, 2023, and is led by Professors U. Dey and P. Kaurav.

Uploaded by

ttyhqh5z68
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ECE-101: Fundamentals of Electronics Tutorial sheet for EE4, EE5, EE6

Tutorial 5: Sequential Circuit, State diagrams, Registers, Counters


Date: 31st October 2023, Time: 1200 hours to 1300 hours, Place: GB-313 and GB 314
Instructions:
• Solve the question with your own efforts prior to coming to the tutorial class.
• Your doubts and queries related to the questions will be addressed in the tutorial class.
Questions: (1st Question is your assignment which needs to be submitted on 30th Oct.)

1. A PN flip-flop has four operations: clear to 0, no change, complement, and set to 1 when inputs P
and N are 00, 01, 10, and 11, respectively.
(a) Tabulate the characteristic table.
(b) Derive the characteristic equation.
(c) Tabulate the excitation table.
(d) Show how the PN flip-flop can be converted to a D flip-flop.

2. Derive the state table for the following circuit. Use the assignments
A = 00, B = 01, C = 10, and D = 11. (T flip flop or toggle flip flop is when we connect J
and K together.)

Prof. U. Dey ([email protected]), Prof. P. Kaurav ([email protected]) Autumn 2023

You might also like