Main Menu - Planning - High Level Planning - Grid Style Load List Page 1 of 3

Home > Main Menu > Planning > High Level Planning > Grid Style Load List

Main Menu - Planning - High Level Planning - Grid Style

Load List
With the Use Grid style load list option enabled FastReact offers the User enhanced Sorting and displaying options in the Load List.
Select orders
The Load list contains a list of orders that have been planned on the High level planning board,(if the High Level Planning Board is part of the FastReact
Licence options) and accepted, by the planner, to the Low Level Board. The list contains the following columns of information:
Order
The order reference is preceded with a small rectangle showing the colour (if any) associated with this order. This followed by the order reference itself.
There may be several entries in the list for the same order if that order has multiple deliveries. For new orders the colour of this entry will your normal
Windows colours (e.g. black on white). However, in systems which have Low level planning, a red order reference will show you that the order had been
allocated to a Low level planning board, but that planner had rejected the order.
Product
A rectangle showing the colour associated with the Product type for this product, followed by the Product reference for the order.
Product type
The product type associated with the product above.
Customer
A rectangle showing the colour associated with the Customer followed by the Customer reference.
Delivery
The delivery date for this part of the order.
Note:
An order can have multiple deliveries.

Quantity
The balance to make of this delivery, bearing in mind that an order can be in the load list even if production has already started.
Description
This is the description of the Order or the Product. You can decide which you want to show in the planning board configuration.
The Load List can be sorted by clicking on the column headers. All columns, except quantity, are sorted in ascending sequence, whilst the delivery
quantity is sorted so that the largest values are at the top of the table.
Note:
It is normally easier to plan the large orders before smaller ones.

Double click an order to load it; the load list will close and return to the planning board view.
Multiple orders can also be selected by right clicking on an order and selecting from the options on the pop up menu. See below.

Load orders
The right click pop up menu has the following options. When you select one of these the load list will highlight your selection. You can then click on the
Load orders tab to close the Load list and return to the planning board. If you are not happy with the selection you can right click on another order and
select again.
Order set
All orders that belong to the same order set will be highlighted.
Linked (::) orders
All orders that have the same base code (the part up to the double colon separator) will be highlighted.
Product
All orders for the selected product will be highlighted.
Linked (::) products
All orders that are for the same base product (the part up to the double colon) will be highlighted.
Orders can be loaded in the sequence when the Load strips in selected sequence is selected from the Setup - Configure - Planning dialog. This allows
for the selecting and planning of multiple orders. This will plan all the selected orders, in order of selection, on one row.

Print
The Load List can be printed.

Low Level Load List

mk:@MSITStore:C:\Fast_React\HelpFile\FR4.CHM::/07_Planning/07_3_High_Leve... 29/01/2024
Main Menu - Planning - High Level Planning - Grid Style Load List Page 2 of 3

At High Level, this tab will list all Orders/Strips in the Low Level Load Lists. This is a static list of Orders/Strips.

Configure
The layout of the Load List dialog can be altered to show User Defined Fields and other useful order and product fields.

Order fields

These fields, when checked, will allow the user to see the order details in the load list. See bellow for the field details.
Code
This is the order code. When checked this will appear on the Load List display.
Description
This is the order description. When checked this will appear on the Load List display.
Required date
This is the date when the planned operation needs to start. When checked this will appear on the Load List display.
Delivery date
This is the order delivery date. When checked this will appear on the Load List display.
Quantity
This is the order quantity. When checked this will appear on the Load List display.
Reference
This is the order reference. When checked this will appear on the Load List display.
Created date
This is the order created date. When checked this will appear on the Load List display.
Status
This is the status of the Order. When checked this will appear on the Load List display.
Extended Status
This is the Extended status of the Order. When checked this will appear on the Load List display.
Set
This is the set to which the Order belongs. When checked this will appear on the Load List display.
Deliver to
This is the location that the Order is to be delivered to. When checked this will appear on the Load List display.
Next planned group
This is the Group of the next planned operation. When checked this will appear on the Load List display.
Previously planned group
This is the Group of the previously planned operation. When checked this will appear on the Load List display.
Host planned group
This is the Collaborated Group at the Host side that the Order is planned on. When checked this will appear on the Load List display.
Host start date
This is the Collaborated start date at the Host side that the Order is planned on. When checked this will appear on the Load List display.
Host end date
This is the Collaborated end date at the Host side that the Order is planned on. When checked this will appear on the Load List display.
Selected stage group
This is the Group for the selected stage. When checked this will appear on the Load List display.
Latest Collab site
This is the Collaborated site that the Order is planned on. When checked this will appear on the Load List display.

Product fields

These fields, when checked, will allow the user to see the product details in the load list. See bellow for the field details.
Code
This is the product code. When checked this will appear on the Load List display.
Description
This is the product description. When checked this will appear on the Load List display.
Property
This is the product property. When checked this will appear on the Load List display. The property will allow the planner to match the order to a
particular Planning Group and/or Row.
Stage
This is the stage (operation) of the Order. When checked this will appear on the Load List display.
Routing valid
This is 'Yes / No' field to indicate whither the Routing is valid or not. When checked this will appear on the Load List display.
Route order
This is a numerical value to indicate the route sequence. When checked this will appear on the Load List display.

Order user defined fields

These fields, when checked, will allow the user to see the Order User Defined fields in the load list. These fields are created during the set up of the
FastReact system.

Product user defined fields

These fields, when checked, will allow the user to see the Product User Defined fields in the load list. These fields are created during the set up of the
FastReact system.

mk:@MSITStore:C:\Fast_React\HelpFile\FR4.CHM::/07_Planning/07_3_High_Leve... 29/01/2024
Main Menu - Planning - High Level Planning - Grid Style Load List Page 3 of 3

Product type fields

These fields, when checked, will allow the user to see the Product Type in the load list. See bellow for the field details.
Code
This is the product type code. When checked this will appear on the Load List display.
Description
This is the product type description. When checked this will appear on the Load List display.

Customer fields

These fields, when checked, will allow the user to see the customer in the load list. See bellow for the field details.
Code
This is the customer code. When checked this will appear on the Load List display.

Product Type user defined fields

These fields, when checked, will allow the user to see the Product Type User Defined fields in the load list. These fields are created during the set up of
the FastReact system.

Customer user defined fields

These fields, when checked, will allow the user to see the Customer User Defined fields in the load list. These fields are created during the set up of the
FastReact system.

Display sequence

This is a list of all the above checked fields. The fields in this list can be re-sequenced in order to produce the desired layout on the load list display.

Show load preview image

This option will enable the Image viewer within the Load List. This will be a thumbnail of the image.

Show where product has been previously made

This option will enable the user to view where Orders with similar products have been made. For an explanation see Suggested Machine/Row.

Show the planned group for this stage

In a multiple stage system the user can choose to view the Group in which the Prior or Next planned operation is planned in.

Reset defaults
This button will reset the display sequence and all the check boxes to their default settings.

Web: - www.fastreact.com

mk:@MSITStore:C:\Fast_React\HelpFile\FR4.CHM::/07_Planning/07_3_High_Leve... 29/01/2024