ASME B16.

47 Series A (MSS SP-44) Flanges

:HOG 1HFN %OLQG

Class 150 lb
Raised
Pipe Flange Data Hub Data Face Drilling Data Radius
Pipe Size
Nominal

WNF Blind Overall Diameter Diameter

Overall Flange Flange Hub Face Bolt Hole
Length at Weld of Circle Fillet
Diameter Thickness Thickness Diameter Diameter Number Diameter
WNF Bevel of Holes
min min of Holes
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm

22 29.50 1.81 1.81 5.88 22.00 24.00 25.25

20
1.38 27.25 0.38
749.30 45.97 45.97 149.35 558.80 609.60 641.35 35.05 692.15 9.65
26 34.25 2.69 2.69 4.75 26.00 26.62 29.50 1.38 31.75 0.38
24
869.95 68.33 68.33 120.65 660.40 676.15 749.30 35.05 806.45 9.65
28 36.50 2.81 2.81 4.94 28.00 28.62 31.50 1.38 34.00 0.44
28
927.10 71.37 71.37 125.48 711.20 726.95 800.10 35.05 863.60 11.18
30 38.75 2.94 2.94 5.38 30.00 30.75 33.75 1.38 36.00 0.44
28
984.25 74.68 74.68 136.65 762.00 781.05 857.25 35.05 914.40 11.18
32 41.75 3.19 3.19 5.69 32.00 32.75 36.00
28
1.62 38.50 0.44
1060.5 81.03 81.03 144.53 812.80 831.85 914.40 41.15 977.90 11.18
34 43.75 3.25 3.25 5.88 34.00 34.75 38.00 1.62 40.50 0.50
32
1111.3 82.55 82.55 149.35 863.60 882.65 965.20 41.15 1028.7 12.70
36 46.00 3.56 3.56 6.19 36.00 36.75 40.25 1.62 42.75 0.50
32
1168.4 90.42 90.42 157.23 914.40 933.45 1022.4 41.15 1085.9 12.70
38 48.75 3.44 3.44 6.19 38.00 39.00 42.25 1.62 45.25 0.50
32
1238.3 87.38 87.38 157.23 965.20 990.60 1073.2 41.15 1149.4 12.70
40 50.75 3.56 3.56 6.44 40.00 41.00 44.25 1.62 47.25 0.50
1289.1 90.42 90.42 163.58 1016.0 1041.4 1124.0 36 41.15 1200.2 12.70
42 53.00 3.81 3.81 6.75 42.00 43.00 47.00
36
1.62 49.50 0.50
1346.2 96.77 96.77 171.45 1066.8 1092.2 1193.8 41.15 1257.3 12.70
44 55.25 4.00 4.00 7.00 44.00 45.00 49.00
40
1.62 51.75 0.50
1403.4 101.60 101.60 177.80 1117.6 1143.0 1244.6 41.15 1314.5 12.70
46 57.25 4.06 4.06 7.31 46.00 47.12 51.00 1.62 53.75 0.50
40
1454.2 103.12 103.12 185.67 1168.4 1196.9 1295.4 41.15 1365.3 12.70
48 59.50 4.25 4.25 7.56 48.00 49.12 53.50 1.62 56.00 0.50
44
1511.3 107.95 107.95 192.02 1219.2 1247.7 1358.9 41.15 1422.4 12.70

Notes
- ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges
which are equivalent to ASME B16.5. MSS SP-44 is the only source for the NPS 22 flange dimensions above.
- Dimension B is to be specified by the purchaser. It corresponds to the pipe inside diameter.
- Flat face flanges may be provided at full thickness, C, or with raised face removed (the latter is nonstandard).
- WNF = Weld Neck Flange.
- The large end of the hub may be straight or tapered.
 ASME B16.47 Series A (MSS SP-44) Flanges

:HOG 1HFN %OLQG

Class 300 lb
Raised
Pipe Flange Data Hub Data Face Drilling Data Radius
Pipe Size
Nominal

WNF Blind Overall Diameter Diameter

Overall Flange Flange Hub Face Bolt Hole
Diameter Thickness Thickness Length at Weld Diameter Diameter Diameter of Circle Fillet
WNF Bevel Number of Holes
min min of Holes
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm

22 33.00 2.62 2.62 6.50 22.00 25.25 25.25 1.62 29.25 0.38
838.20 24
66.55 66.55 165.10 558.80 641.35 641.35 41.15 742.95 9.65
26 38.25 3.12 3.31 7.25 26.00 28.38 29.50 1.75 34.50 0.38
971.55 28
79.25 84.07 184.15 660.40 720.85 749.30 44.45 876.30 9.65
28 40.75 3.38 3.56 7.75 28.00 30.50 31.50 28 1.75 37.00 0.44
1035.1 85.85 90.42 196.85 711.20 774.70 800.10 44.45 939.80 11.18
30 43.00 3.62 3.75 8.25 30.00 32.56 33.75 1.88 39.25 0.44
28
1092.2 91.95 95.25 209.55 762.00 827.02 857.25 47.75 996.95 11.18
32 45.25 3.88 3.94 8.75 32.00 34.69 36.00 2.00 41.50 0.44
1149.4 28
98.55 100.08 222.25 812.80 881.13 914.40 50.80 1054.1 11.18
34 47.50 4.00 4.12 9.12 34.00 36.88 38.00 2.00 43.50 0.50
120.50 28
101.60 104.65 231.65 863.60 936.75 965.20 50.80 1104.9 12.70
36 50.00 4.12 4.38 9.50 36.00 39.00 40.25 2.12 46.00 0.50
1270.0 32
104.65 111.25 241.30 914.40 990.60 1022.4 53.85 1168.4 12.70
38 46.00 4.25 4.25 7.12 38.00 39.12 40.50
32
1.62 43.00 0.50
1168.4 107.95 107.95 180.85 965.20 993.65 1028.7 41.15 1092.2 12.70
40 48.75 4.50 4.50 7.62 40.00 41.25 42.75 1.75 45.50 0.50
32
1238.3 114.30 114.30 193.55 1016.0 1047.8 1085.9 44.45 1155.7 12.70
42 50.75 4.69 4.69 7.88 42.00 43.25 44.75 1.75 47.50 0.50
1289.1 119.13 119.13 200.15 1066.8 1098.6 1136.7 32 44.45 1206.6 12.70
44 53.25 4.88 4.88 8.12 44.00 45.25 47.00 1.88 49.75 0.50
1352.6 32
123.95 123.95 206.25 1117.6 1149.4 1193.8 47.75 1263.7 12.70
46 55.75 5.06 5.06 8.50 46.00 47.38 49.00 2.00 52.00 0.50
1416.1 28
128.52 128.52 215.90 1168.4 1203.5 1244.0 50.80 1320.8 12.70
48 57.75 5.25 5.25 8.81 48.00 49.38 51.25
32
2.00 54.00 0.50
1466.9 133.35 133.35 223.77 1219.2 1254.3 1301.8 50.80 1371.6 12.70

Notes
- ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges
which are equivalent to ASME B16.5. MSS SP-44 is the only source for the NPS 22 flange dimensions above.
- Dimension B is to be specified by the purchaser. It corresponds to the pipe inside diameter.
- Flat face flanges may be provided at full thickness, C, or with raised face removed (the latter is nonstandard).
- WNF = Weld Neck Flange.
- The large end of the hub may be straight or tapered.
ASME B16.47 Series A (MSS SP-44) Flanges

:HOG 1HFN %OLQG

Class 400 lb
Raised
Pipe Flange Data Hub Data Face Drilling Data Radius
Pipe Size
Nominal

WNF Blind Overall Diameter Diameter

Overall Flange Flange Hub Face Bolt Hole
Diameter Thickness Thickness Length at Weld Diameter Diameter Diameter of Circle Fillet
WNF Bevel Number of Holes
min min of Holes
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm

22 33.00 2.88 2.88 6.75 22.00 25.25 25.25

24
1.75 29.25 0.44
838.20 73.15 73.15 171.45 558.80 641.35 641.35 44.45 742.95 11.18
26 38.25 3.50 3.88 7.62 26.00 28.62 29.50
28
1.88 34.50 0.44
971.55 88.90 98.55 193.55 660.40 726.95 749.30 47.75 876.30 11.18
28 40.75 3.75 4.12 8.12 28.00 30.81 31.50 28 2.00 37.00 0.50
1035.1 95.25 104.65 206.25 711.20 782.57 800.10 50.80 939.80 12.70
30 43.00 4.00 4.38 8.62 30.00 32.94 33.75 2.12 39.25 0.50
1092.2 28
101.60 111.25 218.95 762.00 836.68 857.25 53.85 996.95 12.70
32 45.25 4.25 4.56 9.12 32.00 35.00 36.00 2.12 41.50 0.50
1149.4 107.95 115.82 231.65 812.80 889.00 914.40 28 53.85 1054.1 12.70
34 47.50 4.38 4.81 9.50 34.00 37.19 38.00 2.12 43.50 0.56
1206.5 28
111.25 122.17 241.30 863.60 944.63 965.20 53.85 1104.9 14.22
36 50.00 4.50 5.06 9.88 36.00 39.38 40.25
32
2.12 46.00 0.56
1270.0 114.30 128.52 250.95 914.40 1000.3 1022.4 53.85 1168.4 14.22
38 47.50 4.88 4.88 8.12 48.00 39.50 40.75 32 1.88 44.00 0.56
1206.5 123.95 123.95 206.25 1219.2 1003.3 1035.1 47.75 1117.6 14.22
40 50.00 5.12 5.12 8.50 40.00 41.50 43.00 2.00 46.25 0.56
32
1270.0 130.05 130.05 215.90 1016.0 1054.1 1092.2 50.80 1174.8 14.22
42 52.00 5.25 5.25 8.81 42.00 43.62 45.00 2.00 48.25 0.56
1320.8 32
133.35 133.35 223.77 1066.8 1107.9 1143.0 50.80 1225.6 14.22
44 54.50 5.50 5.50 9.18 44.00 45.62 47.25 2.12 50.50 0.56
1384.3 32
139.70 139.70 233.17 1117.6 1158.7 1200.2 53.85 1282.7 14.22
46 56.75 5.75 5.75 9.62 46.00 47.75 49.50 2.12 52.75 0.56
36
1441.5 146.05 146.05 244.35 1168.4 1212.9 1257.3 53.85 1339.9 14.22
48 59.50 6.00 6.00 10.12 48.00 49.88 51.50
28
2.38 55.25 0.56
1511.3 152.40 152.40 257.05 1219.2 1267.0 1308.1 60.45 1403.4 14.22

Notes
- ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges
which are equivalent to ASME B16.5. MSS SP-44 is the only source for the NPS 22 flange dimensions above.
- Class 400 Series A dimensions at NPS 38 and larger also apply to Class 400 Series B flanges.
- Dimension B is to be specified by the purchaser. It corresponds to the pipe inside diameter.
- Flat face flanges may be provided at full thickness, C + raised face, or with raised face removed (the latter is nonstandard).
- WNF = Weld Neck Flange.
- The large end of the hub may be straight or tapered.
 ASME B16.47 Series A (MSS SP-44) Flanges

:HOG 1HFN %OLQG

Class 600 lb
Raised
Pipe Flange Data Hub Data Face Drilling Data Radius
Pipe Size
Nominal

WNF Blind Overall Diameter Diameter

Overall Flange Flange Hub Face Bolt Hole
Diameter Thickness Thickness Length at Weld
Diameter Diameter Diameter of Circle Fillet
WNF Bevel Number of Holes
min min of Holes
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm

22 34.25 3.75 3.75 7.75 22.00 26.25 25.25 1.88 30.62 0.44
869.95 95.25 95.25 196.85 558.80 666.75 641.35 24 47.75 777.75 11.18
26 40.00 4.25 4.94 8.75 26.00 29.44 29.50 2.00 36.00 0.50
1016.0 107.95 125.48 222.25 660.40 747.78 749.30 28 50.80 914.40 12.70
28 42.25 4.38 5.19 9.25 28.00 31.62 31.50 2.12 38.00 0.50
28
1073.2 111.25 131.83 234.95 711.20 803.15 800.10 53.85 965.20 12.70
30 44.50 4.50 5.50 9.75 30.00 33.94 33.75 28 2.12 40.25 0.50
1130.3 114.30 139.70 247.65 762.00 862.08 857.25 53.85 1022.4 12.70
32 47.00 4.62 5.81 10.25 32.00 36.12 36.00
28
2.38 42.50 0.50
1193.8 117.35 147.57 260.35 812.80 917.45 914.40 60.45 1079.5 12.70
34 49.00 4.75 6.06 10.62 34.00 38.31 38.00 2.38 44.50 0.56
28
1244.6 120.65 153.92 269.75 863.60 973.07 965.20 60.45 1130.3 14.22
36 51.75 4.88 6.38 11.12 36.00 40.62 40.25 2.62 47.00 0.56
1314.5 123.95 162.05 282.45 914.40 1031.75 1022.35 28 66.55 1193.0 14.22
38 50.00 6.00 6.12 10.00 38.00 40.25 41.50 2.38 45.75 0.56
28
1270.0 152.40 155.45 254.00 965.20 1022.35 1054.10 60.45 1162.1 14.22
40 52.00 6.25 6.38 10.38 40.00 42.25 43.75 2.38 47.75 0.56
32
1320.8 158.75 162.05 263.65 1016.0 1073.2 1111.3 60.45 1212.9 14.22
42 55.25 6.62 6.75 11.00 42.00 44.38 46.00 28 2.62 50.50 0.56
1403.4 168.15 171.45 279.40 1066.8 1127.3 1168.4 66.55 1282.7 14.22
44 57.25 6.81 7.00 11.38 44.00 46.50 48.25 2.62 52.50 0.56
32
1454.2 172.97 177.80 289.05 1117.6 1181.1 1225.6 66.55 1333.5 14.22
46 59.50 7.06 7.31 11.81 46.00 48.62 50.25 2.62 54.75 0.56
32
1511.3 179.32 185.67 299.97 1168.4 1235.0 1276.4 66.55 1390.7 14.22
48 62.75 7.44 7.69 12.44 48.00 50.75 52.50 2.88 57.50 0.56
1593.9 188.98 195.33 315.98 1219.2 1289.1 1333.5 32 73.15 1460.5 14.22

Notes
- ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges
which are equivalent to ASME B16.5. MSS SP-44 is the only source for the NPS 22 flange dimensions above.
- Class 600 Series A dimensions at NPS 38 and larger also apply to Class 600 Series B flanges.
- Dimension B is to be specified by the purchaser. It corresponds to the pipe inside diameter.
- Flat face flanges may be provided at full thickness, C + raised face, or with raised face removed (the latter is nonstandard).
- WNF = Weld Neck Flange.
- The large end of the hub may be straight or tapered.
ASME B16.47 Series A (MSS SP-44) Flanges

:HOG 1HFN %OLQG

Class 900 lb
Raised
Pipe Flange Data Hub Data Face Drilling Data Radius
Pipe Size
Nominal

WNF Blind Overall Diameter Diameter

Overall Flange Flange Hub Face Bolt Hole
Diameter Thickness Thickness Length at Weld Diameter Diameter Diameter of Circle Fillet
WNF Bevel Number of Holes
min min of Holes
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm

26 42.75 5.50 6.31 11.25 26.00 30.50 29.50

20
2.88 37.50 0.44
1085.9 139.70 160.27 285.75 660.40 774.70 749.30 73.15 952.50 11.18
28 46.00 5.62 6.75 11.75 28.00 32.75 31.50
20
3.12 40.25 0.50
1168.4 142.75 171.45 298.45 711.20 831.85 800.10 79.25 1022.4 12.70
30 48.50 5.88 7.18 12.25 30.00 35.00 33.75
20
3.12 42.75 0.50
1231.9 149.35 182.37 311.15 762.00 889.00 857.25 79.25 1085.9 12.70
32 51.75 6.25 7.62 13.00 32.00 37.25 36.00 3.38 45.50 0.50
20
1314.5 158.75 193.55 330.20 812.80 946.15 914.40 85.85 1155.7 12.70
34 55.00 6.50 8.06 13.75 34.00 39.62 38.00 3.62 48.25 0.56
1397.0 165.10 204.72 349.25 863.60 1006.4 965.20 20 91.95 1225.6 14.22
36 57.50 6.75 8.44 14.25 36.00 41.88 40.25 3.62 50.75 0.56
1460.5 171.45 214.38 361.95 914.40 1063.8 1022.4 20 91.95 1289.1 14.22
38 57.50 7.50 8.50 13.88 38.00 42.25 43.25
20
3.62 50.75 0.75
1460.5 190.50 215.90 352.55 965.20 1073.2 1098.6 91.95 1289.1 19.05
40 59.50 7.75 8.81 14.31 40.00 44.38 45.75
24
3.62 52.75 0.81
1511.3 196.85 223.77 363.47 1016.0 1127.3 1162.1 91.95 1339.9 20.57
42 61.50 8.12 9.12 14.62 42.00 46.31 47.75 3.62 54.75 0.81
24
1562.1 206.25 231.65 371.35 1066.8 1176.3 1212.9 91.95 1390.7 20.57
44 64.88 8.44 9.56 15.38 44.00 48.62 50.00 3.88 57.62 0.88
1648.0 214.38 242.82 390.65 1117.6 1235.0 1270.0 24 98.55 1463.6 22.35
46 68.25 8.88 10.06 16.18 46.00 50.88 52.50 4.12 60.50 0.88
24
1733.6 225.55 255.52 410.97 1168.4 1292.4 1333.5 104.65 1536.7 22.35
48 70.25 9.19 10.38 16.50 48.00 52.88 54.50 4.12 62.50 0.94
24
1784.4 233.43 263.65 419.10 1219.2 1343.2 1384.3 104.65 1587.5 23.88

Notes
- ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges
which are equivalent to ASME B16.5. MSS SP-44 is the only source for the NPS 22 flange dimensions above.
- Class 900 Series A dimensions at NPS 38 and larger also apply to Class 900 Series B flanges.
- Dimension B is to be specified by the purchaser. It corresponds to the pipe inside diameter.
- Flat face flanges may be provided at full thickness, C + raised face, or with raised face removed (the latter is nonstandard).
- WNF = Weld Neck Flange.
- The large end of the hub may be straight or tapered.