LUBRICANT TESTING RESULT FOR SYRINGES AND

DATE SAMPLE BATCH NO

3 ml (24G*1") 092003-06
5 ml (24G*1") 092005-05
10/6/2020 10 ml (21G*1") 092010-02
20 ml (W/ON) 092020-A
50 ml (W/ON) 092050-C
3 ml (24G*1") 032103-B
5 ml (24G*1") 032105-B
4/8/2021 10 ml (W/ON) 032110-D
20 ml (21G*1½") 032120-C
50 ml (W/ON) 032150-D
1 ml (23G*1") 092101-DO
3 ml (24G*1") 092103-P
5 ml (W/ON) 092105-BA
9/29/2021
10 ml (22G*1¼") 092110-16
20 ml (21G*1½") 092120-02
50 ml (W/ON) 092150-02
3 ml (22G*1¼") 032203-Z
5 ml (22G*1") 032205-E
3/31/2022 10 ml (21G*1¼") 032210-AT
20 ml (21G*1½") 032220-K
50 ml (W/ON) 032250-E
20 ml (21G*1½") Lock 092220-K
50 ml (W/ON) Lock 092250-A
10 ml (21G*1½") 092210-AR
11/2/2022 10 ml (21G*1¼") 092210-CO
5 ml (24G*1") 092205-13
3 ml (24G*1") 092203-13
1 ml (W/ON) 062201-I
5 ml (24G*1") 032305-07
1 ml (26*½") 2SILAA007A-MAR/2023-B
3 ml (24G*1") 032303-04
4/27/2023
5 ml (22G*1¼") 042305-AK
20 ml (W/ON) 032320-H
50 ml (W/ON) 032350-A
20 ml (21G*1½") 092320-M
50 ml (W/ON) 092350-G
10 ml (21G*1¼") 102310-EI
10/27/2023 1 ml (26G*½") 100UI/ml SEI0002/23-OUT/2023-C
3 ml (24G*1") 102303-C
5 ml (21G*1½") 102305-AO
5 ml (24G*1") 092305-N
10 ml (21G*1¼") 032410-02

4/12/2024
 5 ml (24G*1") 082305-AK
20 ml (21G*1½") 032420-L
3 ml (24G*1") 032403-05
4/12/2024
5 ml (24G*1") 032405-06
50 ml (W/ON) 032450-M
1 ml (26G*½") 032401-C
1 ml Insulin Syring 100UI/ml E01042401-C
1 ml Insulin Syring 100UI/ml 082401-D
3 ml (24G*1") 092403-02
5 ml (24G*1") 092405-03
5 ml (25G*3/4") 082405-BC
9/24/2024
10 ml (21G*1¼") 092410-DH
20 ml (21G*1½") 092420-E
50 ml (W/ON) 092450-I
D.N (20G*1") 082420-Y

As Per Above table we found that Our Lubricant Limit in the Product come
Conclusion: 1:2017 .
So our Product Meet the all requirnment & Passes this Test

NOTE: If Lubricant Limit crosses the Alert Limit (In-House) 0.100 mg/cm² ,Please
yearly

DATE SAMPLE BATCH NO

3 ml (24G*1") 032103-B

5 ml (24G*1") 032105-B

10 ml (W/ON) 032110-D

4/8/2021

20 ml (21G*1½") 032120-C

50 ml (W/ON) 032150-D

D.N (18G*1½") 032118-E

 D.N (18G*1½") 032118-E

1 ml (23G*1") 092101-DO

3 ml (24G*1") 092103-P

D.N (22G*1½") 092122-G

9/29/2021 5 ml (W/ON) 092105-BA

10 ml (22G*1¼") 092110-16

20 ml (21G*1½") 092120-02

50 ml (W/ON) 092150-02

3 ml (22G*1¼") 032203-Z

5 ml (22G*1") 032205-E

10 ml (21G*1¼") 032210-AT

3/31/2022

20 ml (21G*1½") 032220-K

50 ml (W/ON) 032250-E

D.N (26G*½") 092122-G

20 ml (21G*1½")
092220-K
Lock

50 ml (W/ON)
092250-A
Lock
 50 ml (W/ON)
092250-A
Lock

10 ml (21G*1½") 092210-AR

D.N (25G*1½") 092225-Q

11/2/2022

10 ml (21G*1¼") 092210-CO

5 ml (24G*1") 092205-13

3 ml (24G*1") 092203-13

1 ml (W/ON) 062201-I

5 ml (24G*1") 032305-07

1 ml (26*½") 2SILAA007A-MAR/2023-B

3 ml (24G*1") 032303-04

5 ml (22G*1¼") 042305-AK

4/27/2023

20 ml (W/ON) 032320-H

50 ml (W/ON) 032350-A

D.N (18G*1½") 032318-C

D.N (23G*1") 032323-H

20 ml (21G*1½") 092320-M
 20 ml (21G*1½") 092320-M

50 ml (W/ON) 092350-G

10 ml (21G*1¼") 102310-EI

1 ml (26G*½")
SEI0002/23-OUT/2023-C
100UI/ml
10/27/2023

D.N (18G*1½") 092318-F

3 ml (24G*1") 102303-C

5 ml (21G*1½") 102305-AO

5 ml (24G*1") 092305-N

10 ml (21G*1¼") 032410-02

5 ml (24G*1") 082305-AK

20 ml (21G*1½") 032420-L

3 ml (24G*1") 032403-05

4/12/2024 5 ml (24G*1") 032405-06

50 ml (W/ON) 032450-M

1 ml (26G*½") 032401-C

D.N (24G*1") 032424-B

 D.N (24G*1") 032424-B

1 ml Insulin Syring
E01042401-C
100UI/ml

1 ml Insulin Syring
082401-D
100UI/ml

3 ml (24G*1") 092403-02

5 ml (24G*1") 092405-03

5 ml (25G*3/4") 082405-BC

9/24/2024

10 ml (21G*1¼") 092410-DH

20 ml (21G*1½") 092420-E

50 ml (W/ON) 092450-I

D.N (20G*1") 082420-Y

G RESULT FOR SYRINGES AND NEEDLE BY OUTER LAB TESTING
TEST PARAMETERS SPECIFICATION LIMIT RESULT
Lubricant NMT 0.25 mg/cm² 0.124 mg/cm²
Lubricant NMT 0.25 mg/cm² 0.153 mg/cm²
Lubricant NMT 0.25 mg/cm² 0.118 mg/cm²
Lubricant NMT 0.25 mg/cm² 0.148 mg/cm²
Lubricant NMT 0.25 mg/cm² 0.158 mg/cm²
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By IR) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
 Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected
Lubricant (By AAS) NMT 0.25 mg/cm² Not Detected

Limit in the Product comes with in specification according to ISO 7886-

es this Test

e) 0.100 mg/cm² ,Please increase the frequency of Testing Instead of Half-

TEST PARAMETERS SPECIFICATION LIMIT RESULT

Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.36 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.44 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.41 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.32 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.35 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.41 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.42 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.38 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.28 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.62 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.88 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.39 Ltr/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.19 Ltr/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.26 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.22 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.23 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.29 Ltr/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.26 Ltr/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.29 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.29 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.289 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
Not Detected
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.37 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.39 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.28 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.28 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.37 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.08 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.39 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/kg of Cadmium Not Detected
Total extractable metals NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.39 mg/kg
(Lead,Tin,Zinc & Iron) Iron
Cadmium Metal NMT 0.1 mg/Ltr of Cadmium Not Detected
Alert Limit( In-House)

0.100 mg/cm2
REFERENCE
 IN HOUSE TESTING -PHY
Test Conduct According to
S. No. ISO 7886-1 SPECIFICATION / TOLERANCE

When inspected by normal vision or corrected to-normal vision

1 Extraneous Matter (Cleanliness) surface of syringe which comes into contact of the injection flui
be free from particles and extraneous m

The pH value of an extract prepared with the Syringes should

2 Limits for Acidity or Alkalinity
control fluid.

In extract of syringes the combined amount of lead, tin, zinc &

3 Limits for Extractable Metals
than 5mg/Kg and 0.1mg/kg of cadmiu

The lubricant should not be reach the Luer channel of the Nozzl
4 Lubricant
minimize the visibility. The amount of lubricant should not be

Capacity less than half of nominal capac

Size Volume tested To
1 ml 0.4 0.3
2 ml 0.5 0.4
3 ml 1 0.9
5 ml 2 1.9
10 ml 2 1.8
20 ml 5 4.6
30 ml 10 08 P
50 ml 10 9.1
60 ml 20 18.9
Capacity greater than half of nominal cap
Size Volume tested To
1 ml 0.8 0.7
2 ml 1.5 1.4
3 ml 2 1.9
Tolerance on graduated
5 5 ml 4 3.8
capacity
10 ml 8 7.6
 Tolerance on graduated
5
capacity

20 ml 15 14.4
30 ml 20 19.2
50 ml 40 38.4
60 ml 50 48.0
Nominal Capacity
Size Minimum (mL) Max
1 ml 0.95
2 ml 1.9
3 ml 2.85
5 ml 4.8
10 ml 9.6
20 ml 19.2
30 ml 28.8
50 ml 48
60 ml 57.6
Nominal capacity of syringe Maximum de
1 ml 0.07 m
2 ml 0.07 m
3 ml 0.07 m
5 ml 0.07 m
6 Dead Space
10 ml 0.10 m
20 ml 0.15 m
30 ml 0.17 m
50 ml 0.20 m
60 ml 0.20 m

The graduation lines should be uniform thickness, at right angl

7 Graduated Scale evenly spaced, similar length vertically beneath each other and
graduation lines.

The scale should be numbered at minimum increment given in

less {finer})
Nominal capacity of
Scale Interval
syringe, V
1 ml 0.05 ml
2 ml 0.2 ml
3 ml 0.2 ml
8 Scale Numbering
5 ml 0.5 ml
10 ml 1.0 ml
20 ml 2.0 ml
30 ml 2.0 ml
50 ml 5.0 ml
60 ml 5.0 ml
Nominal Capacity Minimum scale len
1 ml 57 mm
2 ml 27 mm
3 ml 27 mm
Scale Length up to Nominal
9
Capacity
 Scale Length up to Nominal 5 ml 36 mm
9
Capacity 10 ml 44 mm
20 ml 52 mm
30 ml 67 mm
50 ml 75 mm
60 ml 75 mm

When plunger fully inserted, The zero graduation line should coi
10 Scale position
the piston to achieve the graduated capacity

The length of barrel should be such that the syringe has a max
11 Barrel Dimensions
least 10% more than the nominal capa

The syringe should not roll more than 180º on a flat surface at a
12 Barrel Flanges the flange should be adequate size, shape and strength for the i
enable the syringe to be held securely during use, free fro
The design of the plunger and push button of the syringe sho
Plunger stopper/ Plunger barrel held in one hand, the plunger can be depressed by the th
13
Assembly (Design) the Fiducial line coincides with zero graduation lines, the minimu
surface of the barrel flanges nearer to push button sha
Should be 6% taper and conical fitting of hypodermic syring
14 Nozzle conical Fitting
requirements of ISO 80369-7 as describe in S. No. 22,
Nominal capacity of syringe Noz
1ml, 2ml & 3ml Should
15 Nozzle Position 5ml and more than 5ml Either centr
If the nozzle is eccentric than the distance between the axis of
the internal surface of bore of the barrel should not gr

16 Nozzle lumen Inner diameter of nozzle lumen should not be les

There should be no leakage past piston, when a pressure appli

plunger of filled syringe up to 30s to 3

Nominal Capacity of Forces for leakage t

syringe
Side Forces (±5%
1 ml 0.25Newton
Freedom from liquid leakage 2 ml 1.0Newton
17 3 ml 1.0Newton
past piston
5 ml 2.0Newton
10 ml 2.0Newton
20 ml 3.0Newton
30 ml 3.0Newton
50 ml 3.0Newton
60 ml 3.0Newton
Freedom from air past piston Should be no leakage at -88kPa up to 60s and plunger stopper
18
(Aspiration test) plunger.
The syringe should be complies with force to operate the

19 Force to operate the piston

 Syringe Initial forces Mean forces
Volume V Maximum (FS) Maximum (F)
19 Force to operate the piston
V<2 ml 10N 5N
2≤V<50m
25N 10N
l
50≤V ml 30N 15N
When the syringe is filled with water and held vertically with firs
Fit of plunger stopper/plunger in
20 end uppermost, the plunger should not move by reason of its
barrel
contained.

21 Leak test on primary packaging Should be No leakage at 250mmHg

Fluid Leakage by positive Should be no sign of leakage sufficient to form a falling drop of
22
pressure method over a hold period 30s to 35s while being applied pressure

Sub-atmospheric pressure Air Luer connectors shall not leak by more than 0.005Pa.m3/s,
23
Leakage atmospheric pressure between 80 to 88kpa, over a hold pe

Luer connectors shall be evaluated for stress cracking and sha

24 Stress Cracking
fluid leakage as describe in S. No. 22

Luer connector shall not separate from reference connector, ove

Resistance to Separation from
25 for Luer Slip and 15s for Luer Lock, while being applied discon
axial load
23N to 25N for slip and 32N to 35N for Lu
Resistance to separation from
Unscrewing Luer lock connectors shall not separate from reference connect
26
10s to 15s, while applied an unscrewing torque between 0.
(Luer Lock only)
Resistance to overriding Luer lock connectors shall not override the threads or lugs of th
27
applied torque between 0.15N.m to 0.17N.m for a hold per
(Luer Lock only)
Plunger Movement

IN HOUSE TESTING -MICROBIOLO

Sterility Test
28 Should be pass the sterility test
(By Filtration Method)
Bacterial Endotoxin test
29 Should be pass the Bacterial Endotoxin
(By Gel-Clot Method)

30 Biological Indicator Test Should pass the Biological Test

STING -PHYSIOCHEMICAL TESTING FOR HYPODERMIC SYRI
ATION / TOLERANCE LAB

rected to-normal vision, without magnification, the

tact of the injection fluid during normal use, should In House
cles and extraneous matter.

th the Syringes should be within ±1 unit of that of

In House
ontrol fluid.

ount of lead, tin, zinc & iron should not be greater

Outer Lab
nd 0.1mg/kg of cadmium.

er channel of the Nozzle & it should be optimized to

In House/Outer Lab
lubricant should not be exceeded 0.25mg/cm 2.

half of nominal capacity (ml)

Tolerance
0.377-0.423
0.460-0.540
0.935-1.065
1.905-2.095
1.830-2.170
4.650-5.350
08 Pcs / Batch
9.150-10.850
18.900-21.100
n half of nominal capacity (ml)
Tolerance
0.760-0.840
1.425-1.575
1.900-2.100
3.840-4.160 In House
7.680-8.320
 In House

14.400-15.600
19.200-20.800
38.400-41.600
48.000-52.000
minal Capacity
Maximum (mL)
1.05
2.1
3.15
5.2
10.4
20.8
31.2
52
62.4
Maximum dead space
0.07 ml
0.07 ml
0.07 ml
0.07 ml
In House
0.10 ml
0.15 ml
0.17 ml
0.20 ml
0.20 ml

thickness, at right angles to the axis of barrel, they

eneath each other and approx. half (length) of long In House
duation lines.

um increment given in the table (At least or can be

ess {finer})
Increment between graduation lines
0.1 ml
1.0 ml
1.0 ml
In House
1.0 ml
5.0 ml
10.0 ml
10.0 ml
10.0 ml
10.0 ml
Minimum scale length
57 mm
27 mm
27 mm

In House
 36 mm
In House
44 mm
52 mm
67 mm
75 mm
75 mm

aduation line should coincide with the fiducial line on

In House
he graduated capacity tolerance.

the syringe has a maximum usable capacity of at

In House
than the nominal capacity.

0º on a flat surface at an angle of 10º to horizontal;

e and strength for the intended purpose and should In House
ely during use, free from flash & sharp edges.
tton of the syringe should be such that, when the
be depressed by the thumb of that hand. And when
In House
uation lines, the minimum length of the plunger from
arer to push button shall be at least 8mm
ng of hypodermic syringe nozzle shall meet the
In House
describe in S. No. 22, 23, 24, 25, 26 & 27.
Nozzle position
Should be centrally
Either centrally or eccentrically In House
ce between the axis of nozzle and nearest point on
he barrel should not greater than 4.5 mm

men should not be less than 1.2 mm In House

when a pressure applied as per below table at the

syringe up to 30s to 35s.
Forces for leakage testing
Side Forces (±5%)
0.25Newton
1.0Newton
1.0Newton In House
2.0Newton
2.0Newton
3.0Newton
3.0Newton
3.0Newton
3.0Newton
s and plunger stopper should not be detached from
In House
plunger.
with force to operate the piston as per below:

In House
 Max. Force (Fmax)

In House

< (2.0X measured F) or measured

F+1.5N), whichever is higher

held vertically with first one end and then the other
t move by reason of its own mass and the water In House
contained.

o leakage at 250mmHg. In House

o form a falling drop of water from Luer connectors

In House
being applied pressure between 300 to 330kpa

re than 0.005Pa.m3/s, while being applied sub-

In House
88kpa, over a hold period between 15s to 20s

stress cracking and shall meet the requirements of

In House
as describe in S. No. 22.

eference connector, over a hold period between 10s

e being applied disconnection axial force between In House
and 32N to 35N for Luer lock.

rom reference connector for a hold period between

In House
wing torque between 0.0198N.m to 0.0200N.m

he threads or lugs of the reference connector, while

In House
0.17N.m for a hold period between 05s to 10s.

MICROBIOLOGICAL TESTING FOR HYPODERMIC SYRINGE

pass the sterility test In House

he Bacterial Endotoxin Test In House

ss the Biological Test In House

R HYPODERMIC SYRINGE
SAMPLING PLAN REFERENCE REMARKS

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017 This Test is prformed on the

frequency of half Yearly By the Third
Party (Shree Balaji Test Lab Pvt. Ltd.)

08 Pcs / Batch ISO 7886-1:1993

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 7886-1:2017

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

 08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch In - House

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021 Frequency of this test is half yearly

on the basis of the previous
historical testing data

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

08 Pcs / Batch ISO 80369-7:2021

ODERMIC SYRINGE
20 Pcs / Batch (As per sampling Plan) USP 43Chaptor 71

03 Pcs / Batch USP 43 Chaptor 85

We also send the sample to third
USP 43 Chaptor 55 & party for validate our inhouse
Each Sterilizer
ISO 11135-1 testing result
 IN HOUSE TESTING -PHYSIOCHEMICAL
Test Conduct According to
S. No. SPECIFICATION / TOLER
ISO 7864 :1993

When inspected by normal or corrected-to-normal vis

illuminance of 300 Lux to 700 Lux the surface of hypode
1 Cleanliness
particles & extraneous matter. And when inspected under
surface) of hypodermic needles should be free from

2 Limits for acidity and alkalinity The pH value of an extract prepared with the needles shou

In the extract of needles the amount of lead, tin, zinc, iron

3 Limits for extractable metals
and cadmium lower than 0.1

The outer diameter and length of needle tube should be e

4 Size designation
needle size expressed in gauge size & optionally wall t

Size of needle Colo

26 Gauge
25 Gauge
24 Gauge M
23 Gauge
5 Color of hub 22 Gauge
21 Gauge
20 Gauge
19 Gauge
18 Gauge
16 Gauge
If a separate needle cap is provided, it shall be made eithe
6 Needle cap
If pigmented the color shall same as Nee
The conical socket of hypodermic needle “Hub” shou
7 Conical fitting
requirements of ISO 80369-7 as describe in
Length of needle tube
<25 mm
8 Tolerance on length 25 mm to 39 mm
40 mm
>40 mm
 When inspected by normal or corrected to normal vis
9 Freedom from defects
illuminance of 300Lx to 700Lx, the outer surface of tubin

The lubricant should not be visible under normal or correc

10 Lubricant
or inside of the needle tube. The amount of the lubricant

When examined under x2.5 magnification the needle po

feather, edges, burrs and hooks. And Needle point Penet

Needle
Maximum Sharpness Force (N)
Size
Needle point
11
(Sharpness test) 26G-24G 0.85

23G-20G 0.9

19G-16G 1

The bond between Hub and needle tube sho

OD of Needle tube (mm)
0.18 to 0.30
0.33 to 0.50
Bond between hub and
12 0.55 to 0.60
needle tube
0.7
0.8
0.9
1.10 to 1.20
A stainless steel stylet of the appropriate diameter selec
table should pass easily throug

OD (mm) Regular / Normal walled

0.45 0.18 mm
0.5 0.18 mm
13 Patency of Lumen 0.55 0.22 mm
0.6 0.25 mm
0.7 0.30 mm
0.8 0.40 mm
0.9 0.48 mm
1.1 0.58 mm
1.2 0.70 mm
Leak test on primary
14 Should be no leakage at 25
packaging
Fluid Leakage by positive Should be no sign of leakage sufficient to form a falling dro
15
pressure method hold period 30s to 35s while being applied pres
Sub-atmospheric pressure Air Luer connectors shall not leak by more than 0.005pa.m 3/s
16
Leakage pressure between 80 to 88kpa, over a hold p
 Luer connectors shall be evaluated for stress cracking an
17 Stress Cracking
leakage as describe in S.
Resistance to Separation Luer connector shall not separate from reference conne
18
from axial load while being applied disconnection axial for

IN HOUSE TESTING -MICROBIOL

Sterility Test
19 Should be pass the steril
(By Filtration Method)

20 Bacterial Endotoxin Test Should be pass the Bacterial En

21 Biological Indicator Test Should pass the Biologic

YSIOCHEMICAL TESTING FOR HYPODERMIC NEEDLE
SPECIFICATION / TOLERANCE SAMPLING PLAN/FREQUENCY

al or corrected-to-normal vision without magnification under an

0 Lux the surface of hypodermic needles tube should be free from 08 Pcs / Batch
. And when inspected under 2.5X magnification, the hub (fluid path
needles should be free from particles & extraneous matter.

epared with the needles should be within ±1 unit of that control fluid. 08 Pcs / Batch

amount of lead, tin, zinc, iron should not be greater than 5mg/Liter
and cadmium lower than 0.1mg/Liter.

h of needle tube should be expressed in millimeter. And optionally

08 Pcs / Batch
auge size & optionally wall thickness as RW, TW, ETW or UTW

Colour of needle hub

Brown
Orange
Medium purple
Deep blue
Black 08 Pcs / Batch
Deep green
Yellow
Cream
Pink
White
ovided, it shall be made either pigmented or un-pigmented material.
08 Pcs / Batch
the color shall same as Needle hub or ISO 6009.
podermic needle “Hub” should be 6% taper and shall meet the
08 Pcs / Batch
ISO 80369-7 as describe in S. No. 15, 16, 17 & 18
needle tube Tolerance
mm +1 mm, -2 mm
o 39 mm +1.5 mm, -2.5 mm 08 Pcs / Batch
mm +0 mm, -4 mm
mm +1.5 mm, -2.5 mm
al or corrected to normal vision without magnification under an
08 Pcs / Batch
x, the outer surface of tubing shall be smooth & free from defects

sible under normal or corrected vision as droplets of fluid on outside

The amount of the lubricant should not be exceeded 0.25mg/cm2.

magnification the needle points should appear sharp & free from
oks. And Needle point Penetration force shall be as per given table

Maximum gliding force

mum Sharpness Force (N)
(N)
08 Pcs / Batch
0.85 0.18

0.9 0.2

1 0.22

en Hub and needle tube should be as per given table

Required Force (Min.)
11 Newton
22 Newton
34 Newton 08 Pcs / Batch
40 Newton
44 Newton
54 Newton
69 Newton
appropriate diameter selected from the diameters given in below
e should pass easily through the needle
Extra thin
ar / Normal walled Thin walled
walled
0.18 mm 0.23 mm -
0.18 mm 0.23 mm -
0.22 mm 0.27 mm - 08 Pcs / Batch
0.25 mm 0.29 mm 0.30 mm
0.30 mm 0.35 mm 0.37 mm
0.40 mm 0.42 mm 0.44 mm
0.48 mm 0.49 mm 0.50 mm
0.58 mm 0.60 mm 0.68 mm
0.70 mm 0.73 mm 0.83 mm

Should be no leakage at 250mmHg. 08 Pcs / Batch

sufficient to form a falling drop of water from Luer connectors over a

08 Pcs / Batch
5s while being applied pressure between 300 to 330kpa.
k by more than 0.005pa.m 3/s, while being applied sub-atmospheric
08 Pcs / Batch
n 80 to 88kpa, over a hold period between 15s to 20s.
 luated for stress cracking and shall meet the requirements of fluid
08 Pcs / Batch
leakage as describe in S. No. 15.
parate from reference connector, over a hold period between 10s,
08 Pcs / Batch
plied disconnection axial force between 23N to 25N

G -MICROBIOLOGICAL TESTING FOR NEEDLE

20 Pcs / Batch (As per sampling
Should be pass the sterility test
Plan)

uld be pass the Bacterial Endotoxin Test 03 Pcs / Batch

Should pass the Biological Test Each Sterilizer

E
REFERENCE

ISO 7864:1993

ISO 7864:1993

ISO 7864:1993

ISO 7864:1993

ISO 7864:1993

ISO 7864:1993

ISO 7864:1993 &

ISO 80369-7

ISO 7864:1993
 ISO 7864:1993

ISO 7864

ISO 7864:1993

ISO 7864:1993

ISO 7864:1993

In House
Specifications

ISO 80369-7:2021

ISO 80369-7:2021
ISO 80369-7:2021

ISO 80369-7:2021

USP 43 Chaptor71
& ISO 11737-1

USP 43 Chaptor 85

USP 43 Chaptor 55
& ISO 11135-1
DATE SAMPLE BATCH NO TEST PARAMETERS
3 ml (24G*1") 092003-06 Total extractable metals
(Lead,Tin,Zinc & Iron)
Cadmium Metal
5 ml (24G*1") 092005-05 Total extractable metals
(Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
10 ml (21G*1¼") 092010-02 (Lead,Tin,Zinc & Iron)
Cadmium Metal
9/24/2020
Total extractable metals
20 ml (W/ON) 092020-A (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
50 ml (W/ON) 092050-C (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (21G*1½") 092022-P (Lead,Tin,Zinc & Iron)
Cadmium Metal
3 ml (24G*1") 092003-06 Lubricant
5 ml (24G*1") 092005-05 Lubricant
10/6/2020 10 ml (21G*1") 092010-02 Lubricant
20 ml (W/ON) 092020-A Lubricant
50 ml (W/ON) 092050-C Lubricant
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 032103-B
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (24G*1") 032105-B
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (W/ON) 032110-D
Cadmium Metal
4/8/2021 Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (21G*1½") 032120-C
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 032150-D
Cadmium Metal
 50 ml (W/ON) 032150-D

Lubricant (By IR)

Total extractable metals
D.N (18G*1½") 032118-E (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
(Lead,Tin,Zinc & Iron)
1 ml (23G*1") 092101-DO
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 092103-P
Cadmium Metal
Lubricant (By IR)
Total extractable metals
D.N (22G*1½") 092122-G (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (W/ON) 092105-BA
9/29/2021 Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (22G*1¼") 092110-16
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (21G*1½") 092120-02
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 092150-02
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (22G*1¼") 032203-Z
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (22G*1") 032205-E
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (21G*1¼") 032210-AT
Cadmium Metal
3/31/2022 Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (21G*1½") 032220-K
3/31/2022

20 ml (21G*1½") 032220-K
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 032250-E
Cadmium Metal
Lubricant (By IR)
Total extractable metals
D.N (26G*½") 092122-G (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
20 ml (21G*1½") (Lead,Tin,Zinc & Iron)
092220-K
Lock Cadmium Metal
Lubricant (By IR)
Total extractable metals
50 ml (W/ON) (Lead,Tin,Zinc & Iron)
092250-A
Lock Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (21G*1½") 092210-AR
Cadmium Metal
Lubricant (By IR)
Total extractable metals
D.N (25G*1½") 092225-Q (Lead,Tin,Zinc & Iron)
Cadmium Metal
11/2/2022 Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (21G*1¼") 092210-CO
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (24G*1") 092205-13
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 092203-13
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
1 ml (W/ON) 062201-I
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (24G*1") 032305-07
Cadmium Metal
Lubricant (By IR)
Total extractable metals
2SILAA007A-MAR/ (Lead,Tin,Zinc & Iron)
1 ml (26*½")
2023-B
 Total extractable metals
2SILAA007A-MAR/ (Lead,Tin,Zinc & Iron)
1 ml (26*½")
2023-B Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 032303-04
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (22G*1¼") 042305-AK
Cadmium Metal
4/27/2023
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (W/ON) 032320-H
Cadmium Metal
Lubricant (By IR)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 032350-A
Cadmium Metal
Lubricant (By IR)
Total extractable metals
D.N (18G*1½") 032318-C (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (23G*1") 032323-H (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (21G*1½") 092320-M
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 092350-G
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (21G*1¼") 102310-EI
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
1 ml (26G*½") SEI0002/23-OUT/ (Lead,Tin,Zinc & Iron)
100UI/ml 2023-C Cadmium Metal
10/27/2023 Lubricant (By AAS)
Total extractable metals
D.N (18G*1½") 092318-F (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 102303-C
 Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 102303-C
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (21G*1½") 102305-AO
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (24G*1") 092305-N
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (21G*1¼") 032410-02
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (24G*1") 082305-AK
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (21G*1½") 032420-L
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 032403-05
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
4/12/2024 (Lead,Tin,Zinc & Iron)
5 ml (24G*1") 032405-06
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 032450-M
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
1 ml (26G*½") 032401-C
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
D.N (24G*1") 032424-B (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
1 ml Insulin (Lead,Tin,Zinc & Iron)
Syring E01042401-C
100UI/ml Cadmium Metal
 1 ml Insulin
Syring E01042401-C
100UI/ml
Lubricant (By AAS)
Total extractable metals
1 ml Insulin (Lead,Tin,Zinc & Iron)
Syring 082401-D
100UI/ml Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
3 ml (24G*1") 092403-02
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (24G*1") 092405-03
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
5 ml (25G*3/4") 082405-BC
Cadmium Metal
Lubricant (By AAS)
9/24/2024
Total extractable metals
(Lead,Tin,Zinc & Iron)
10 ml (21G*1¼") 092410-DH
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
20 ml (21G*1½") 092420-E
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
50 ml (W/ON) 092450-I
Cadmium Metal
Lubricant (By AAS)
Total extractable metals
(Lead,Tin,Zinc & Iron)
D.N (20G*1") 082420-Y
Cadmium Metal
Lubricant (By AAS)

DATE SAMPLE BATCH NO TEST PARAMETERS

Total extractable metals
3 ml (24G*1") 032103-B (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (24G*1") 032105-B (Lead,Tin,Zinc & Iron)
 5 ml (24G*1") 032105-B
Cadmium Metal
Total extractable metals
10 ml (W/ON) 032110-D (Lead,Tin,Zinc & Iron)
Cadmium Metal
4/8/2021
Total extractable metals
20 ml (21G*1½") 032120-C (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
50 ml (W/ON) 032150-D (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (18G*1½") 032118-E (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
1 ml (23G*1") 092101-DO (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
3 ml (24G*1") 092103-P (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (22G*1½") 092122-G (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
9/29/2021 5 ml (W/ON) 092105-BA (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
10 ml (22G*1¼") 092110-16 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
20 ml (21G*1½") 092120-02 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
50 ml (W/ON) 092150-02 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
3 ml (22G*1¼") 032203-Z (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (22G*1") 032205-E (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
10 ml (21G*1¼") 032210-AT (Lead,Tin,Zinc & Iron)
Cadmium Metal
3/31/2022
Total extractable metals
20 ml (21G*1½") 032220-K (Lead,Tin,Zinc & Iron)
3/31/2022

20 ml (21G*1½") 032220-K
Cadmium Metal
Total extractable metals
50 ml (W/ON) 032250-E (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (26G*½") 092122-G (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
20 ml (21G*1½") (Lead,Tin,Zinc & Iron)
092220-K
Lock
Cadmium Metal
Total extractable metals
50 ml (W/ON) (Lead,Tin,Zinc & Iron)
092250-A
Lock
Cadmium Metal
Total extractable metals
10 ml (21G*1½") 092210-AR (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (25G*1½") 092225-Q (Lead,Tin,Zinc & Iron)
Cadmium Metal
11/2/2022
Total extractable metals
10 ml (21G*1¼") 092210-CO (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (24G*1") 092205-13 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
3 ml (24G*1") 092203-13 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
1 ml (W/ON) 062201-I (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (24G*1") 032305-07 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
2SILAA007A-MAR/ (Lead,Tin,Zinc & Iron)
1 ml (26*½")
2023-B
Cadmium Metal
Total extractable metals
3 ml (24G*1") 032303-04 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (22G*1¼") 042305-AK (Lead,Tin,Zinc & Iron)
Cadmium Metal
4/27/2023
Total extractable metals
20 ml (W/ON) 032320-H (Lead,Tin,Zinc & Iron)
4/27/2023

20 ml (W/ON) 032320-H
Cadmium Metal
Total extractable metals
50 ml (W/ON) 032350-A (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (18G*1½") 032318-C (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (23G*1") 032323-H (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
20 ml (21G*1½") 092320-M (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
50 ml (W/ON) 092350-G (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
10 ml (21G*1¼") 102310-EI (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
1 ml (26G*½") SEI0002/23-OUT/ (Lead,Tin,Zinc & Iron)
100UI/ml 2023-C
Cadmium Metal
10/27/2023
Total extractable metals
D.N (18G*1½") 092318-F (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
3 ml (24G*1") 102303-C (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (21G*1½") 102305-AO (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (24G*1") 092305-N (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
10 ml (21G*1¼") 032410-02 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (24G*1") 082305-AK (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
20 ml (21G*1½") 032420-L (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
3 ml (24G*1") 032403-05 (Lead,Tin,Zinc & Iron)

4/12/2024
 3 ml (24G*1") 032403-05
Cadmium Metal
Total extractable metals
4/12/2024 5 ml (24G*1") 032405-06 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
50 ml (W/ON) 032450-M (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
1 ml (26G*½") 032401-C (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (24G*1") 032424-B (Lead,Tin,Zinc & Iron)
Cadmium Metal
1 ml Insulin Total extractable metals
Syring E01042401-C (Lead,Tin,Zinc & Iron)
100UI/ml Cadmium Metal
1 ml Insulin Total extractable metals
Syring 082401-D (Lead,Tin,Zinc & Iron)
100UI/ml Cadmium Metal
Total extractable metals
3 ml (24G*1") 092403-02 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (24G*1") 092405-03 (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
5 ml (25G*3/4") 082405-BC (Lead,Tin,Zinc & Iron)
Cadmium Metal
9/24/2024
Total extractable metals
10 ml (21G*1¼") 092410-DH (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
20 ml (21G*1½") 092420-E (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
50 ml (W/ON) 092450-I (Lead,Tin,Zinc & Iron)
Cadmium Metal
Total extractable metals
D.N (20G*1") 082420-Y (Lead,Tin,Zinc & Iron)
Cadmium Metal
SPECIFICATION LIMIT RESULT REFERENCE
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.28 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected ISO 7886-1:2017
NMT 5.0 mg/kg of Lead,Tin,Zinc & SBTL
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.30 mg/Ltr
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 0.25 mg/cm² 0.124 mg/cm²
NMT 0.25 mg/cm² 0.153 mg/cm²
NMT 0.25 mg/cm² 0.118 mg/cm²
NMT 0.25 mg/cm² 0.148 mg/cm²
NMT 0.25 mg/cm² 0.158 mg/cm²
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.36 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.44 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.41 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.32 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.35 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.41 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.42 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.38 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.28 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.62 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.88 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.39 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.19 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.26 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.22 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
Iron
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.23 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.29 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.26 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.29 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.289 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
Not Detected
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.37 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.39 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.28 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.37 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.08 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.39 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.39 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 0.25 mg/cm² Not Detected

SPECIFICATION LIMIT RESULT REFERENCE

NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.36 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.44 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.41 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.32 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.35 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.41 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.42 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.38 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.28 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.62 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.88 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.40 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.39 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.19 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.26 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.22 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.27 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.23 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.29 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.26 Ltr/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.29 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.289 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.24 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
Not Detected
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.20 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.37 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.39 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.34 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.28 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.37 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.08 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.39 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.21 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.31 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.33 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/kg of Lead,Tin,Zinc &
0.25 mg/kg
Iron
NMT 0.1 mg/kg of Cadmium Not Detected
NMT 5.0 mg/Ltr of Lead,Tin,Zinc &
0.39 mg/kg
Iron
NMT 0.1 mg/Ltr of Cadmium Not Detected