Scribd
Upload
38 views2 pages

Adc

This document is a code for a microcontroller-based multimeter that reads analog voltage using an ADC. It includes configuration settings, initialization of the ADC, reading the ADC value, and displaying the voltage on a 7-segment display. The code is structured with functions for initialization, reading, and displaying the voltage, and operates in an infinite loop to continuously update the display.

Uploaded by

k2cpc4dqfk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
38 views2 pages

Adc

This document is a code for a microcontroller-based multimeter that reads analog voltage using an ADC. It includes configuration settings, initialization of the ADC, reading the ADC value, and displaying the voltage on a 7-segment display. The code is structured with functions for initialization, reading, and displaying the voltage, and operates in an infinite loop to continuously update the display.

Uploaded by

k2cpc4dqfk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

// MULTIMETRO

#pragma config PLLDIV = 1, CPUDIV = OSC1_PLL2, USBDIV = 1


//CONFIG1L
#pragma config FOSC = HS, FCMEN = OFF, IESO = OFF
//CONFIG1H
#pragma config PWRT = OFF, BOR = OFF, BORV = 3, VREGEN = OFF
//CONFIG2L
#pragma config WDT = OFF, WDTPS = 32768
//CONFIG2H
#pragma config MCLRE = ON, LPT1OSC = OFF, PBADEN = OFF, CCP2MX = ON
//CONFIG3H
#pragma config STVREN = OFF, LVP = OFF, ICPRT = OFF, XINST = OFF, DEBUG = OFF
//CONFIG4L
#pragma config CP0 = OFF, CP1 = OFF, CP2 = OFF, CP3 = OFF
//CONFIG5L
#pragma config CPB = OFF, CPD = OFF
//CONFIG5H
#pragma config WRT0 = OFF, WRT1 = OFF, WRT2 = OFF, WRT3 = OFF
//CONFIG6L
#pragma config WRTB = OFF, WRTC = OFF, WRTD = OFF
//CONFIG6H
#pragma config EBTR0 = OFF, EBTR1 = OFF, EBTR2 = OFF, EBTR3 = OFF
//CONFIG7L
#pragma config EBTRB = OFF
//CONFIG7H

#include <xc.h>

#define _XTAL_FREQ 20000000 //Frecuencia del oscilador


#define AN0_CHANNEL 0 //Canal AN0 para el ADC

//Prototipos
void init_ADC(void);
unsigned int read_ADC(void);
void display_voltage(unsigned int value);

//Tabla de segmentos para los dígitos


const unsigned char segment[] = {0b00000011, 0b10011111, 0b00100101, 0b00001101,
0b10011001, 0b01001001, 0b01000001, 0b00011111, 0b00000001, 0b00011001};
const unsigned char uniseg[] = {0b00000010, 0b10011110, 0b00100100, 0b00001100,
0b10011000, 0b01001000, 0b01000000, 0b00011110, 0b00000000, 0b00011000};

//Configuración inicial
void init_ADC(void) {
ADCON0 = 0b00000001; //Canal AN0, encender ADC
ADCON1 = 0b00001110; //AN0 como entrada analógica
ADCON2 = 0b10101001; //Justificación derecha, FOSC/8, 2TAD
}

//Leer el valor del ADC


unsigned int read_ADC(void) {
ADCON0bits.GO = 1; //Iniciar conversión
while (ADCON0bits.GO); //Esperar a que termine la conversión
return ((ADRESH << 8) + ADRESL); //Combinar registros
}

//Mostrar el valor en el display de 7 segmentos


void display_voltage(unsigned int value) {
float voltage = (value * 4.995) / 1023; //Calcular voltaje real
voltage = voltage * 1000;
unsigned int display_val = (unsigned int)(voltage); //Escalar para mostrar
decimal

// Dividir el valor en decenas y unidades


unsigned int uni = display_val / 1000; //Parte de "volts" (unidad
completa)
unsigned int dec = (display_val / 100) % 10; //Centésimas
unsigned int cen = (display_val / 10) % 10; //Décimas
unsigned int mil = display_val % 10; //Milésimas

PORTD = segment[mil];
PORTC = 0b10000000;
__delay_ms(10);
PORTD = 0xFF;

PORTD = segment[cen];
PORTC = 0b00000100;
__delay_ms(10);
PORTD = 0xFF;

PORTD = segment[dec];
PORTC = 0b00000010;
__delay_ms(10);
PORTD = 0xFF;

PORTD = uniseg[uni];
PORTC = 0b00000001;
__delay_ms(10);
PORTD = 0xFF;
}

void main(void) {
TRISA = 0x01; //AN0 como entrada
TRISC = 0x00; //Puerto C como salida (para segmentos)
TRISD = 0x00; //Puerto D como salida (para segmentos)

init_ADC(); //Inicializar el ADC

while (1) {
unsigned int adc_value = read_ADC(); // eer el ADC
display_voltage(adc_value); //Mostrar voltaje en displays
}
}

You might also like