Vehicle design for pedestrian protection

AJ McLean
CASR REPORT SERIES CASR037 May 2005

Report documentation
REPORT NO.
CASR037

DATE
May 2005

PAGES
22

ISBN
1 920947 39 6

ISSN
1449-2237

TITLE
Vehicle design for pedestrian protection

AUTHOR
AJ McLean

PERFORMING ORGANISATION
Centre for Automotive Safety Research The University of Adelaide South Australia 5005 AUSTRALIA

SPONSORED BY
Roads and Traffic Authority Sydney AUSTRALIA

AVAILABLE FROM
Centre for Automotive Safety Research http://casr.adelaide.edu.au/reports

ABSTRACT
This report is a review of the regulation of vehicle design as it relates to the protection of a pedestrian in the event of a collision. It commences with a brief description of the background to the current approach to regulation in this area and then gives an overview of the requirements of the European and Japanese regulations. Moves by the UN/ECE through the Global Technical Regulations to develop an internationally acceptable standard are described in the context of the existing regulations and the on-going work of the International Harmonised Research Activities Pedestrian Safety Working Group. The report concludes with a description of the proposed European Directive for the regulation of the design of vehicle frontal protection systems (bull bars) to reduce the risk of injury to a pedestrian in a collision, and a comparison of these proposed requirements with the Australian Standard for Vehicle Frontal Protection Systems.

KEYWORDS
Vehicle design, Pedestrian, Traffic accident, Standardization.

The University of Adelaide 2005 The views expressed in this report are those of the authors and do not necessarily represent those of the University of Adelaide or the sponsoring organisation

Summary
This report is a review of the regulation of vehicle design as it relates to the protection of a pedestrian in the event of a collision. It commences with a brief description of the background to the current approach to regulation in this area and then gives an overview of the requirements of the European and Japanese regulations. Moves by the UN/ECE through the Global Technical Regulations to develop an internationally acceptable standard are described in the context of the existing regulations and the on-going work of the International Harmonised Research Activities Pedestrian Safety Working Group. The report concludes with a description of the proposed European Directive for the regulation of the design of vehicle frontal protection systems (bull bars) to reduce the risk of injury to a pedestrian in a collision, and a comparison of these proposed requirements with the Australian Standard for Vehicle Frontal Protection Systems.

CASR Road Safety Research Report | Vehicle design for pedestrian protection

iii

Contents
1 2 Background............................................................................................................................. 1 Development of pedestrian impact test procedures.............................................................. 2 2.1 2.2 2.3 2.4 EEVC ............................................................................................................................. 2 ISO ................................................................................................................................ 4 IHRA.............................................................................................................................. 4 NCAP pedestrian impact test procedures ................................................................... 5 2.4.1 Euro NCAP and Australian NCAP ................................................................... 5 2.4.2 Japan NCAP.................................................................................................... 5

Vehicle safety standards for pedestrian protection............................................................... 6 3.1 3.2 3.3 3.4 European Union Directive ............................................................................................ 6 Japan Technical Standard ........................................................................................... 7 Proposed draft Global Technical Regulation on pedestrian protection...................... 8 3.3.1 Regulatory impact and economic effectiveness ............................................ 9 Pedestrian Safety Rulemaking in Korea ...................................................................... 9

Vehicle safety standards for bull bars .................................................................................. 10 4.1 4.2 Proposed European Union Directive.......................................................................... 10 Australian Standard for Motor Vehicle Frontal Protection Systems......................... 11

Acknowledgements ...................................................................................................................... 12 References .................................................................................................................................... 13 Attachment.................................................................................................................................... 14

iv

CASR Road Safety Research Report: Vehicle design for pedestrian protection

Background
The relevance of vehicle design to the safety of car occupants was generally accepted by the late 1960s. Even then, however, there was little interest in attempting to protect the pedestrian by regulating the design of the car, other than by prohibiting the attachment of sharp objects such as some bonnet mascots. It was commonly assumed that a seriously injured pedestrian had been run over by the striking car and that, in any event, the typical impact was too great to be modified by any practicable change in vehicle design. The first accurate description of the motion of a pedestrian struck by a car was based on the investigation of actual collisions in Adelaide. It was published in the proceedings of the Ninth Stapp Car Crash Conference, as follows: The sequence of events when a car strikes a pedestrian is as follows, assuming the pedestrian is an adult, standing erect. The initial impact is from the bumper bar which strikes the lower leg. The effects of this impact for a given vehicle speed depend partly on the amount of body weight this limb is supporting at impact, and partly on the limbs own inertia. Almost at the same instant, but slightly later, the leading edge of the bonnet (hood) of the car will strike the hip of the pedestrian. If the speed of the car is great enough the pedestrian then rotates about this secondary impact point until his head and chest strike the bonnet, windscreen and/or the windscreen surroundings. The higher the impact speed the further back along the car this third impact point will be. At still higher speeds the pedestrian now rotates about his head and shoulders, i.e., the third impact point. This can result in either a fourth impact with the car or in the car passing under the pedestrian who then falls to the road. On this fourth impact with the car the pedestrians legs strike the rear of the roof of the car. From this point, if the car does not slow down, the pedestrian, who is now travelling almost at the speed of the car, will fall to the road, either behind or on one side of the car. If the driver of the car should suddenly brake, the car will then slow down at a much faster rate than the pedestrian, who tends to continue forwards with undiminished speed, sliding over the roof and bonnet and then falling to the road in front of the car. He finally comes to rest after sliding and rolling along the road. (Ryan and McLean, 1966) In the same paper it was also noted that: With a larger amount of data it will be possible to describe the frontal shape of a car that will inflict minimal injuries when it strikes a pedestrian. Today, four decades later, the properties of the front of a car that will inflict minimal injuries when it strikes a pedestrian are understood well enough to justify the regulation of vehicle design.

CASR Road Safety Research Report | Vehicle design for pedestrian protection

Development of pedestrian impact test procedures

Four groups have, or had, been working on the development of test procedures to be used in assessing the degree of pedestrian protection afforded by a given vehicle. They are the United States National Highway Traffic Safety Administration (NHTSA), the European Experimental Vehicles Committee (EEVC), the International Standards Organisation (ISO) and the International Harmonised Research Activities (IHRA). Each group has approached the task by developing component, or sub-system, tests rather than a whole system test. This is largely because of (1) intractable difficulties in ensuring repeatability in full scale collisions between a pedestrian dummy and a vehicle, (2) the need for a family of dummies to represent the pedestrian population (child through adult) and (3) concern about the biofidelity of a pedestrian dummy. A full scale pedestrian crash test dummy, POLAR II, has been developed by Honda R&D in collaboration with GESAC and the Japan Automobile Research Institute. The Society of Automotive Engineers has a Pedestrian Dummy Task Group which is developing criteria for a full scale pedestrian dummy. However, at this stage these dummies are intended primarily for use in research. Neither has been referred to in any regulation of vehicle design and so they will not be considered further in this report. During the 1980s the United States National Highway Traffic Safety Administration (NHTSA) was actively involved in the development of vehicle impact test methods for pedestrian protection. Although Notices of Proposed Rule Making were prepared, this work was suspended in 1992. (NHTSA, 1993) Today, there is some research being conducted in this area by NHTSA as the United States Governments contribution to the work of the International Harmonised Research Activities Pedestrian Safety Working Group (IHRA PS).

2.1

EEVC
The European Experimental Vehicles Committee (EEVC, now re-named the European Enhanced Vehicle-safety Committee) has played the major role in the development of pedestrian impact test procedures through its Working Groups (WG) 7, 10 and 17. EEVC WG 7 (Pedestrians) was set up in 1982 to examine how car design could take into consideration pedestrian accidents in European countries. Its report addressed, inter alia, the improvement of vehicle design and test and assessment methods. (EEVC WG 7, 1982). At the end of 1987 EEVC Working Group 10 Pedestrian Protection was established. The mandate of this Working Group was: ..... to determine test methods and acceptance levels for assessing the protection afforded to pedestrians by the fronts of cars in an accident. The test methods should be based on sub-system tests, essentially to the bumper, bonnet leading edge and bonnet top surface. The bumper test should include the air dam; the bonnet leading edge test should include the headlight surround and the leading edge of the wings; the test to the bonnet top should include the scuttle, the lower edge of the windscreen frame and the top of the wings. Test methods should be considered that evaluate the performance of each part of the vehicle structure with respect to both child and adult pedestrians, at car to pedestrian impact speeds of 40 km/h. The different impact characteristics associated with changes in the general shape of the car front should be allowed for by variations in the test conditions (e.g. impact mass and velocity, direction of impact). (EEVC WG 17, 1998 & 2002) Working Group 10 proposed a 40 km/h test speed with a Head Injury Criterion (HIC) value of no more than 1,000 for a 2.5 kg child headform and for a 4.8 kg adult headform. The lower leg criteria were a maximum dynamic lateral bending angle of 15 degrees, maximum shearing displacement of 6 mm and a maximum acceleration of 150 g at the top of the tibia. For the upper leg the actual impactor speed was a function of the shape of the front of the

CASR Road Safety Research Report: Vehicle design for pedestrian protection

vehicle for a vehicle impact speed of 40 km/h. The instantaneous sum of the impact forces on the impactor was not to exceed 220 Nm and the bending moment on the impactor was not to exceed 220 Nm. A summary of the test methods and acceptance criteria proposed by WG 10 is contained in the final report (EEVC, 1994) and in a paper by the chairman. (Janssen, 1996) In May 1997 the former members of EEVC WG10, on request of the EEVC Steering Committee, met again to discuss technical progress and new developments with respect to the EEVC pedestrian protection test methods. Based on these discussions the Steering Committee decided in June 1997 to set up a new EEVC Working Group WG 17 Pedestrian Safety with two main tasks: 1. Review of the EEVC WG10 test methods (final report 1994) and propose possible adjustments taking into account new and existing data in the field of accident statistics, biomechanics and test results (to be completed within one year). 2. Prepare the EEVC contribution to the IHRA working group on pedestrian safety. With respect to the first task, WG 17 reported that: Recent accident statistics have been analysed, showing among other findings a decrease in the proportion of injuries caused by the bonnet leading edge of modern streamlined passenger cars. Moreover, it is found that the windscreen and A-pillars of these cars are important injury areas, not covered by the EEVC test methods. Future research in this field is recommended. (EEVC WG 17, 1998 & 2002) WG 17 also concluded that: ... the test methods, (....) have existed for many years and were used in a lot of test programmes. Current changes include improvements of definitions, interpretations and test repeatability. There is no need for further validation in terms of an evaluation of the test methods using recent cars, since the test methods were designed to work for cars generally. (ibid) The Working Group also commented on the manner in which the test methods might be introduced in a European Directive for pedestrian protection. If the test methods can not be introduced completely in an European Directive, i.e. if it is decided that it would be desirable to introduce the procedure progressively, there are at least three possibilities: firstly only a proportion of the test areas could be required to meet all test requirements initially, with the proportion gradually increasing to 100 per cent over a fixed period (which is the method already suggested by EEVC WG10 in 1994), secondly the acceptance limits could be introduced at a higher level initially, gradually reducing to the limits proposed in this report or thirdly, the tests could be introduced progressively. If the latter option is selected, the following priority order for the test methods is proposed by EEVC WG17: 1. Headform to bonnet top tests (higher priority for child headform test); 2. Legform to bumper test (up to 500 mm bumper height, above that height an optional, alternative upper legform to bumper test); 3. Upper legform to bonnet leading edge test. It should be noted that these test methods are linked to each other with respect to several definitions, test areas, tools and requirements. (ibid)

CASR Road Safety Research Report | Vehicle design for pedestrian protection

2.2

ISO
In 1983 the International Standards Organisations (ISO) Technical Committee on Road Vehicles formed a Working Group to Develop a method for discrimination between passenger car front ends as to their relative friendliness when impacting a pedestrian. (ISO/TC22/SC10, Document N173, 1983) The Working Group (WG2) met for the first time in 1988. The secretariat is based at the Japan Society of Automotive Engineers. There was substantial common membership with EEVC Working Group 10. Consequently it is not surprising that the work programs of the two groups were similar to each other. The recommendations of the ISO Group do differ somewhat from those of WG 10, however. For example, the child and adult headforms are of the same diameter (165 mm) and 3.5 and 4.5 kg mass, respectively. Since the late 1990s the emphasis in international activity in pedestrian safety and vehicle design has shifted from the ISO Working Group to that of the International Harmonised Research Activities program.

2.3

IHRA
The International Harmonized Research Activities (IHRA) program was proposed at the 15th International Technical Conference on the Enhanced Safety of Vehicles (ESV) held in Melbourne in 1996. The primary tasks assigned to the Pedestrian Safety Working Group (PS-WG) were: (a) To investigate and to analyze the latest pedestrian accidents in the IHRA member countries (b) To establish harmonized test procedures that would reflect conditions typical of the pedestrian accident environment and would include vehicle structures that can be improved for the reduction of fatalities and alleviation of severe injuries in pedestrian vs. passenger car crashes (c) To encourage the use of the research results as the basis for future harmonized technical pedestrian safety regulations Test procedures for child and adult head impacts and the adult leg (in the vicinity of the knee joint) have been developed by the IHRA Working Group. These procedures are similar, but not identical, to the EEVC test procedures (the headform specifications are the same as those of the ISO Working Group). The IHRA test procedures have been developed to be suitable for vehicle impact speeds ranging from 30 to 50 km/h. For a given vehicle impact speed the speed and angle of each headform impactor is determined by reference to the results of computer modelling of the pedestrian/vehicle collision which takes into account the frontal shape of the striking vehicle. However, the computer model is still being developed and so this aspect of the test procedure that is derived it may be subject to change. The Centre for Automotive Safety Research at the University of Adelaide is involved in the work of the IHRA Group, with McLean as the Australian representative and Anderson as chairman of the computer modelling committee.

CASR Road Safety Research Report: Vehicle design for pedestrian protection

2.4
2.4.1

NCAP pedestrian impact test procedures

Euro NCAP and Australian NCAP
There are three New Car Assessment Programs (NCAP) conducting pedestrian impact tests: Euro NCAP, Australian NCAP (ANCAP) and Japan NCAP (JNCAP). Euro NCAP test procedures are based on those developed by EEVC and ANCAP pedestrian test procedures are identical to those of Euro NCAP. However, because many, or possibly most, current vehicles have not been designed to comply with the EEVC criteria the Euro NCAP consortium introduced the following assessment changes: With the current level of pedestrian protection provided by car fronts, it would be optimistic to expect protection levels to exceed those proposed by the EEVC. In order to discriminate between cars which more nearly meet the EEVC requirements from those which greatly exceed them, a lower limit has been set. This has been derived from experience gained in the early phases of Euro NCAP. From Phase 3, a sliding scale system of points scoring has been used. This involves two limits for each parameter, a more demanding limit (higher performance), beyond which a maximum score is obtained and a less demanding limit (lower performance), below which no points are scored. For each impact site in the pedestrian tests, a maximum of two points are available. Where a value falls between the two limits, the score is calculated by linear interpolation.
(See: <http://www.euroncap.com/Content-Web-Page/fb5e236e-b11b-4598-8e20-3eced15ce74e/protocols.aspx>)

The higher and lower performance limits for head protection are HIC values of 1,000 and 1,350 for an impactor speed of 40 km/h.

2.4.2

Japan NCAP
JNCAP test procedures are limited to child and adult headform tests which are similar to the Japan Standard (see below) except that the headform impact velocity has been increased from 32 km/h to 35 km/h.
(See: <http://www.nasva.go.jp/mamoru/english/2006/protect/method.html>)

CASR Road Safety Research Report | Vehicle design for pedestrian protection

Vehicle safety standards for pedestrian protection

Vehicle safety standards for pedestrian protection have been introduced in Europe and Japan. They are reviewed in this section of the report. Standards relating to vehicle frontal protection systems (bull bars) are reviewed in the next section.

3.1

European Union Directive

The initial proposal for a European Union Directive relating to the protection of pedestrians and other vulnerable road users in the event of a collision with a motor vehicle was based on the EEVC test methods. (EEVC WG 17, 1998 & 2002) After extensive political discussions between the car industry, government representatives and the European Commission, the following negotiated agreement was reached: EU Ministers have reached a political agreement on the proposed directive on pedestrian protection, as amended after the European Parliament's first reading resolution. The proposed directive, which aims to mitigate the severity of injuries to pedestrians, lays down tests and limit values for the frontal structures of motor vehicles. Every year, some 8,000 pedestrians and cyclists are killed and a further 300,000 injured on Europe's roads. In a first phase, starting in 2005, new types of vehicles must comply with two tests to protect against head and leg injuries. In a second phase, starting in 2010, four tougher tests will be required for new types of vehicles: two tests concerning head injuries and two concerning leg injuries. These tests are based on the recommendations of the European Enhanced Vehicle Safety Committee (EEVC). Within five years from the start of the second phase, all new vehicles will have to comply with these test requirements. Depending on technological progress, alternative measures to the requirements laid down in the proposal might be developed, possibly including active safety measures designed to prevent accidents altogether. A feasibility assessment will be done by 1 July 2004 on other measures that may have at least equal protective effects and the proposed technical test provisions for the second phase tests. Should the assessment show that these alternatives have at least equal protective effects, the Commission will consider relevant proposals to amend or adapt the directive.
(See <http://europa.eu.int/comm/enterprise/library/enterprise-europe/news-updates/internal-market/2003/20030923.htm>)

The

on The preamble and the main part of the Directive, together with the technical provisions, are listed in an Attachment to this report.
<http://europa.eu.int/comm/enterprise/automotive/pagesbackground/pedestrianprotection/index.htm> .

Directive

2003/102/EC

of

the

European

Parliament

is

accessible

The EU directive is similar to the EEVC test procedures in that the test areas do not extend beyond the rear of the bonnet. (There is an exception to this in Phase 1 of the Directive which has a requirement for an adult headform test on the windscreen, as described in the next paragraph.) The two phases of the EU directive differ markedly with respect to the requirements for protection against pedestrian head injury from impacts with the bonnet of the vehicle. In Phase 1, there is a requirement for a child headform test using a 3.5 kg impactor of 165 mm diameter at an impactor speed of 35 km/h. The value of HPC, the Head Performance Criterion as they call it (which is identical to HIC, the Head Injury Criterion), is not to exceed 1,000 over two thirds of the bonnet test area and 2,000 over the remaining one third. There is no mandatory compliance requirement for an adult headform test. but the HPC value
6
CASR Road Safety Research Report: Vehicle design for pedestrian protection

resulting from a 4.8 kg headform striking the windscreen at 35 km/h must be recorded and compared with HPC 1,000. The specification for this test ensures that no contact is made with the windscreen surrounds, including the A-pillars. In Phase 2, a child and an adult head impact test are required, each at an impact speed of 40 km/h. The child test is to be conducted with a lighter and smaller impactor than in Phase 1, (2.5 kg and 130 mm diameter), and the adult test with a 4.8 kg (165 mm) impactor. The value of HPC is not to exceed 1,000 anywhere on the bonnet test area with either impactor. The recommendation from EEVC WG 17, quoted above, regarding possible staged introduction of their tests, was that priority be given to headform rather than legform tests, although WG 17 did acknowledge the desirability of giving precedence to the child headform test over the adult should these two tests not be introduced simultaneously. As indicated above, the EU Directive in its present form represents the result of considerable negotiation, which is ongoing for the more demanding second phase which comes into effect in 2010. The major topics being negotiated relate to the feasibility of the EEVC test requirements with respect to production vehicles and to the contribution of pedestrian collision prevention and injury mitigation measures such as brake assist. The feasibility assessment referred to in the previous section was conducted by TRL Limited. (Lawrence et al, 2004) Their comprehensive and detailed report, together with the industry responses, and an addendum by TRL (Hardy and Lawrence, 2005) primarily on the likely benefits of brake assist, provide an excellent account of the matters that are being considered. Lawrence et al (2004) and sections of the industry are in favour of a relaxation of some of the Phase 2 requirements on the grounds of technical feasibility (see Lawrence et al, Chapter 11, pp 201-210 and Hardy and Lawrence, p 22).

3.2

Japan Technical Standard

The Japan Ministry of Land, Infrastructure and Transport (MLIT) has introduced a Technical Standard for Protection of Heads of Pedestrians applicable to new passenger cars and derivatives from 1 September 2005, and to existing models from 1 September 2010. For other types of vehicle, such as SUVs, trucks, cab-over, hybrid and extremely low height vehicles, the corresponding dates for new and existing vehicles are 1 September 2007 and 1 September 2012. An English language version of the Standard is accessible as Attachment 99 on the following website: <http://www.unece.org/trans/doc/2004/wp29grsp/ps-95.pdf>. (Note that there is an error in that Attachment. The scope (1) should read ....passenger capacity of 10 persons or more.... not or less.) This Standard is based on the headform impact tests proposed by the IHRA Pedestrian Safety Working Group. The Japan Standard requires tests using a child and an adult headform according to the IHRA specification of a common diameter of 165 mm and a mass of 3.5 and 4.5 kg respectively. The headform impact speed is 32 km/h, and the angle of its trajectory is dependent on the shape of the front of the vehicle, namely sedan, SUV and one-box (typically light vans). The values of these parameters are derived from computer simulations conducted for the IHRA Working Group. As indicated above, the computer model is still being developed and so it is possible that the headform impact speeds in the IHRA test procedure may change. However, there is no indication that that would affect the test procedures in the Japan Standard. At present, it is expected that the Japan Standard will be aligned in terms of test requirements and compliance criteria with a Global technical regulation (see below).

CASR Road Safety Research Report | Vehicle design for pedestrian protection

3.3

Proposed draft Global Technical Regulation on pedestrian protection

The Japanese Government submitted a proposal to the UN/ECE World Forum for Harmonization of Vehicle Regulations, more commonly known as WP29, for a draft Global Technical Regulation (GTR) for pedestrian protection. WP29 referred it to GRSP, the working group on passive safety, which convened an Informal Group under the technical sponsorship of Japan. The initial meeting of the Informal Group was held in 2002. The purpose of this regulation is to bring about an improvement in the construction of the fronts of vehicles and, in particular, those areas which have been most frequently identified as causing injury when in collision with a pedestrian or other vulnerable road user. The tests required are limited to those elements of the child and adult body most frequently identified as sustaining injury, i.e. the adult head and leg and the child head. To achieve the required improvements in construction of vehicles, the tests are based on sub-system component impactors representing those body regions and impacted at speeds representative of that below which the majority of injuries occur. (The above description can be found in PS /143/ Rev.1: <http://www.unece.org/trans/main/wp29/wp29wgs/wp29grsp/pedestrian_8.html>) Unlike the EU Directive, this proposed GTR does not include reference to pedestrian/vehicle collision avoidance measures: There was discussion on whether the proposed pedestrian gtr should regulate passive and/or active safety systems. Active safety systems such as brake assist, anti-lock brakes and day-light running lights were suggested as solutions for the reduction of pedestrian injuries, but it was ultimately counselled by GRSP and WP.29 to concentrate on passive systems for this gtr as this is the main domain of expertise of the GRSP experts and only to provide advice on the use of active systems. (ibid, page 7) At the present stage this draft proposal refers to cars and car derivatives of a mass less than 2,500 kg. It comprises child and adult headform tests at 32 km/h with a maximum HIC value of 1,000 to the bonnet (as for the Japan Standard) and, where indicated by the wrap around distance to the rear reference line, to the windscreen (excluding any impact with the windscreen surround, including the A-pillars). There is also a lower legform to bumper test at a speed of 40 km/h using, at this stage, a rigid impactor to the IHRA specification. Some members of the Informal Group strongly prefer a flexible lower legform impactor (FlexPLI), developed in Japan, to the TRLdeveloped rigid impactor which is specified by EEVC, EU, ISO, and IHRA. It is proposed that a Technical Evaluation group be formed to decide whether FlexPLI can be used for testing and compliance verification purposes and, if it can, that it replace the rigid impactor. There is no provision for an upper legform test at this stage for the following reasons: Test results using the proposed upper legform to bonnet leading edge prescriptions are contradictory to the actual situation encountered in many real world accidents. This fact together with the existing concerns on the impact energy, the test tool biofidelity and the injury acceptance levels, caused the group to exclude the test at this stage. However, the group recognises that this test may have potential value and requests IHRA/PS to carry out further research into the needs and methods for this test. (ibid, page 9)

CASR Road Safety Research Report: Vehicle design for pedestrian protection

3.3.1

Regulatory impact and economic effectiveness

The tests in this GTR are all technically and economically feasible as outlined in section V regulatory impact and economic effectiveness, but it will be the decision of each jurisdiction to determine whether the benefits achieved by requiring these tests justify the costs of the improvements. Based on this determination, a jurisdiction can choose to limit the application in their own regulation to specific vehicle categories, it may also choose to limit the weight of the vehicle to which it applies, and/or it may decide to phase in the regulations over time. (ibid, page 8)

3.4

Pedestrian Safety Rulemaking in Korea

Although no specific notification has been given of the introduction of a pedestrian safety regulation in the Republic of Korea it is likely that a standard for pedestrian head protection will be introduced in 2010 and for leg protection in 2009. (Presentation by the Ministry of Construction and Transportation to the GRSP Informal Group on pedestrian protection in 2004.)

CASR Road Safety Research Report | Vehicle design for pedestrian protection

4
4.1

Vehicle safety standards for bull bars

Proposed European Union Directive
The UK Department of Environment, Transport and the Regions commissioned the Transport Research Laboratory to conduct an extensive series of tests on bull bars to the requirements of the EEVC pedestrian protection test methods. The results of these tests showed that it is feasible to make bull bars to meet the requirements of a 40 km/h subsystems test method. (Lawrence et al, 2000) The United Kingdom then prepared an outline proposal for discussion of a provisional draft European Commission Directive relating to the external projections of motor vehicles. This led on to the publication in 2003 of a proposal for an EU Directive relating to the use of frontal protection systems on motor vehicles. This proposal, and the associated technical provisions, are accessible on the following websites: <http://europa.eu.int/prelex/detail_dossier_real.cfm?CL=en&DosId=185890> <http://europa.eu.int/comm/enterprise/automotive/directives/proposals.htm>. A summary of the proposed Directive is as follows: PURPOSE : to establish technical requirements for the type-approval of motor vehicles as regards frontal protection systems supplied as original equipment fitted to vehicles or as separate technical units. PROPOSED ACT : Directive of the European Parliament and of the Council. CONTENT : Systems providing additional frontal protection of motor vehicles ("frontal protection systems") have been increasingly used in recent years. Some of these systems constitute a risk to the safety of pedestrians and other road users in the case of a collision with a motor vehicle. This proposal aims to provide added protection to pedestrians and other vulnerable road users in the event of a collision with a motor vehicle fitted with a frontal protection system. It lays down requirements that must be complied with by frontal protection systems either as originally fitted to a vehicle or put on the market as separate technical units. As the construction of motor vehicles is covered by framework Directive 70/156/EEC establishing the EC typeapproval system for vehicles, components and separate technical units, the proposed requirements will also be part of that system. Road accident statistics indicate that a significant proportion of casualties involve pedestrians and cyclists who are injured as a result of contact with a moving vehicle and notably the frontal structures of passenger cars. The Parliament, in its report of June 2002, invited the Commission to propose legislation banning rigid bull bars supplied as after market equipment. The scope of this Directive has been limited to vehicles of categories M1 and N1 up to 3.5 tonnes: since these vehicle categories represent the vast majority of vehicles currently in use, the proposed measures will have the widest practicable effect in reducing pedestrian injuries. The prescribed requirements for frontal protection systems are laid down in the form of tests, which are described in Section 4 of Annex I to the proposal. As of 1 July 2005, Member States will no longer grant EC type-approval for a type of vehicle on grounds relating to the fitting of frontal protection systems, or for a type of frontal protection system as separate technical unit, if the requirements of the Annexes of this Directive are not fulfilled. As of 1 January 2006 all new vehicles that are fitted with frontal protection systems and all new frontal protection systems put

10

CASR Road Safety Research Report: Vehicle design for pedestrian protection

on the market will have to comply with the proposed requirements. The requirements will be tested according to detailed technical prescriptions which will be set out by the Commission in accordance with Article 13 of Directive 70/156/EEC.
<http://www2.europarl.eu.int/oeil/FindByProcnum.do?lang=2&procnum=COD/2003/0226>

The test procedures specify a child headform test at 40 km/h with a HIC limit of 1,000 to those parts of a vehicle frontal protection system that are more than 900 mm above the ground. The legform tests, which are conducted at a vehicle impact velocity of 40 km/h, can include both a lower and an upper legform test. However, if the frontal protection system lower bumper height is more than 500 m at the test position the manufacturer may elect to perform an upper rather than a lower legform test. At the time of preparation of this review there had not been a decision by the European Parliament on this proposed Directive. There is some concern that the two classes of vehicle referred to, M1 and N1, are passenger cars and passenger car derivatives and therefore do not include some vans and 4WDs or SUVs. There is also consideration being given to requiring the level of protection provided a pedestrian by a frontal protection system to be shown to be better than that of the vehicle to which it is fitted.

4.2

Australian Standard for Motor Vehicle Frontal Protection Systems

The Australian Standard (AS 4876.12002, Motor vehicle frontal protection systems. Part 1: Road User Protection) is similar to the proposed EU Directive in that it requires child headform tests on those parts of the vehicle frontal protection system (VFPS) that are above a specified height. Apart from that similarity there is little in common between the two approaches. As noted above, the draft EU Directive child headform test is to be conducted on parts of the VFPS that are more than 900 mm above the ground at a speed of 40 km/h with a resultant HIC value of no more than 1,000. The Australian Standard specifies a child headform test on parts of the VFPS that are more than 1,000 mm above the ground at a speed of 30 km/h with a resultant HIC value of no more than 1,500. There is no requirement for a legform test in Australian Standard AS 4876.12002. Neither the Australian Standard nor the proposed EU Directive take into account possible effects on the risk of abdominal injuries and on the overall kinematics of the pedestrian/vehicle collision resulting from the top rail of a frontal protection system striking an adult pedestrian above the top of the pelvis.

CASR Road Safety Research Report | Vehicle design for pedestrian protection

11

Acknowledgements
This report was commissioned by the New South Wales Roads and Traffic Authority. The Centre for Automotive Safety Research receives core funding from both the South Australian Motor Accident Commission and the Department of Transport and Urban Planning. The views expressed in this report are those of the authors and do not necessarily represent those of the University of Adelaide or the sponsoring organisations.

12

CASR Road Safety Research Report: Vehicle design for pedestrian protection

References
EEVC Working Group 17 Report - Improved Test Methods To Evaluate Pedestrian Protection Afforded By Passenger Cars (December 1998 with September 2002 updates) EEVC: Working Group 7 on Pedestrian Injury Accidents. Pedestrian Injury Accidents Proceedings of the Ninth ESV Conference, Kyoto, November 1982. EEVC: Working Group 10 on Pedestrian Protection. Proposals for methods to evaluate pedestrian protection for passenger cars: Final Report. November 1994. Hardy BJ, Lawrence GJL. A study on the feasibility of measures relating to the protection of pedestrians and other vulnerable road users Addendum to final report. 31pp. 2005 Janssen E.G. EEVC test methods to evaluate pedestrian protection afforded by passenger cars. Proceedings of the Fifteenth ESV Conference, Australia, May 1996. Lawrence GJL, Rodmell C, Osborne A. Assessment and test procedures for bull bars. TRL Report 460. 50pp. 2000 Lawrence GJL, Hardy BJ, Carroll JA, Donaldson WMS, Visvikis C, Peel DA. A study on the feasibility of measures relating to the protection of pedestrians and other vulnerable road users Final report. EC Contract No. FIF.20030937. 217pp. 2004. (see <http://europa.eu.int/comm/enterprise/automotive/pagesbackground/pedestrianprotection/index.htm>) National Highway Traffic Safety Administration. Pedestrian injury reduction research: report to the Congress, June 1993. Washington: US Department of Transportation. National Highway Traffic Safety Administration, 1993. Ryan GA, McLean AJ, Pedestrian survival. In: Proc. Ninth Stapp Car Crash Conference. Minneapolis: Nolte Center for Continuing Education, University of Minnesota, Minneapolis. 1966: 321-334.

CASR Road Safety Research Report | Vehicle design for pedestrian protection

13

Attachment

14

CASR Road Safety Research Report: Vehicle design for pedestrian protection

CASR Road Safety Research Report | Vehicle design for pedestrian protection

15

16

CASR Road Safety Research Report: Vehicle design for pedestrian protection

CASR Road Safety Research Report | Vehicle design for pedestrian protection

17

18

CASR Road Safety Research Report: Vehicle design for pedestrian protection