Lines 1
Lines 1
1. A line AB, 50 mm long, has its end A in both the H.P. and the V.P. It is inclined at 30° to the
H.P. and at 45° to the V.P. Draw its projections.
2. A line PQ 75 mm long, has its end P in the V.P. and the end Q in the H.P. The line is inclined
at 30° to the H.P. and at 60° to the V.P. Draw its projections.
3. A line PQ 100 mm long, is inclined at 30° to the H.P. and at 45° to the V.P. Its mid-point is in
the V.P. and 20 mm above the H.P. Draw its projections, if its end P is in the third quadrant and
Q in the first quadrant.
4. The top view of a 75 mm long line AB measures 65 mm, while the length of its front view is
50 mm. Its one end A is in the H.P. and 12 mm in front of the V.P. Draw the projections of AB
and determine its inclinations with the H.P. and the V.P.
5. The projectors of the ends of a line AB are 50 mm apart. The end A is 20 mm above the H.P.
and 30 mm in front of the V.P. The end B is 10 mm below the H.P. and 40 mm behind the V.P.
Determine the true length and traces of AB, and its inclinations with the two planes.
6. The end A of a line AB is 25 mm behind the VP and is below the H.P. The end B is 12 mm in
front of the V.P. and is above the H.P. The distance between the projectors is 65 mm. The line is
inclined at 40° to the H.P. and its H.T. is 20 mm behind the V.P. Draw the projections of the line
and determine its true length and the VT.
7. A line AB, inclined at 40° to the V.P., has its ends 50 mm and 20 mm above the H.P. The
length of its front view is 65 mm and its V.T. is 10 mm above the H.P. Determine the true length
of AB, its inclination with the H.P and its H.T.