Scribd
Upload
2 views

Tutorial_1

The document is a tutorial consisting of 23 questions related to electrical circuits, covering topics such as Wye-Delta transformation, node voltages, supernode analysis, super mesh analysis, source transformation, Thevenin and Norton equivalents, and Laplace transforms. Each question references a specific figure and requires calculations or analyses based on circuit theory. The tutorial aims to enhance understanding of circuit analysis techniques and their applications.

Uploaded by

roshithasabbisetti
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2 views

Tutorial_1

The document is a tutorial consisting of 23 questions related to electrical circuits, covering topics such as Wye-Delta transformation, node voltages, supernode analysis, super mesh analysis, source transformation, Thevenin and Norton equivalents, and Laplace transforms. Each question references a specific figure and requires calculations or analyses based on circuit theory. The tutorial aims to enhance understanding of circuit analysis techniques and their applications.

Uploaded by

roshithasabbisetti
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Tutorial 1

Q.1. Obtain the equivalent resistance Rab for the circuit in Fig. 1 using Wye-Delta Transformation.
Then find current i.

Fig. 1

Q.2. Calculate the node voltages in the circuit shown in Fig. 2.

Fig. 2

Q.3. For the circuit shown in Fig. 3, find the node voltages using supernode analysis.

Fig. 3

Q.4. For the circuit in Fig. 4, find i1 to i4 using super mesh analysis.
Fig. 4

Q.5. Use source transformation to find Vo in the circuit of Fig. 5.

Fig. 5

Q.6. Find io in the circuit of Fig. 6 using source transformation.

Fig. 6

Q.7. Find io in the circuit of Fig. 7 using superposition.

Fig. 7
Q.8. Find the Thevenin equivalent circuit of the circuit shown in Fig. 8, to the left of the terminals a-b.
Then find the current through RL = 6.

Fig. 8

Q.9. Find the Norton equivalent circuit of the circuit in Fig. 9 at terminals a-b.

Fig. 9

Q.10. Determine the value of RL that will draw the maximum power from the rest of the circuit in Fig.
10. Calculate the maximum power.

Fig. 10

Q.11. Determine the current through a 200 μF capacitor whose voltage is shown in Fig. 11.

Fig. 11

Q.12. The current through a 0.1 H inductor is i(t) = 10te −5t A. Find the voltage across the inductor and
the energy stored in it.

Q.13. If the switch in Fig. 13 opens at t = 0, find v(t) for t ≥ 0 and energy across capacitor at t=0.
Fig. 13

Q.14. Assuming that i(0) = 10 A, calculate i(t) and ix(t) in the circuit of Fig. 14.

Fig. 14

Q.15. The switch in Fig. 15 is closed at t = 0. Find i(t) and v(t) for all time.

Fig. 15

Q.16. At t = 0, switch 1 in Fig. 16 is closed, and switch 2 is closed 4 s later. Find i(t) for t > 0. Calculate i
for t = 2 s and t = 5 s.

Fig. 16

Q.17. The circuit in Fig. 17 has reached steady state at t = 0−. If the switch moves to position b from a
at t = 0, calculate i(t) for t > 0.

Fig. 17
Q.18. Find v(t) for t > 0 in the RLC circuit of Fig. 18.

Fig. 18

Q.19. For the circuit in Fig. 19, find v(t) and i(t) for t > 0. Consider R = 1 Ω.

Fig. 19

Q.20. In the circuit of Fig. 20, find i(t) and iR(t) for t > 0.

Fig. 20

Q.21. Determine the Laplace transform of


a) t2 sin (2t) u(t)
b) sin (ωt + θ) u(t)
c) h(t) in Fig. 21

Fig. 21

Q.22. Obtain the initial and the final values of


3
3 s +2 s +6
G ( s )= 2
s ( s +1 ) ( s+1.5 )

Q.23. Calculate v(t) given that


2
10 s + 4
a) V ( s )= 2
s ( s +1 ) ( s+ 2 )
20
b) V ( s )=
( s +3 ) ( s +8 s+25 )
2

You might also like