Scribd
Upload
8 views3 pages

Interfacing KS0108 Arduino

This document provides a step-by-step guide for interfacing a 192x64 display, such as the KS0108, with an Arduino microcontroller. It includes details on gathering components, wiring the display, installing necessary libraries, writing and uploading code to display text. The guide aims to help users set up the display and troubleshoot any issues they may encounter.

Uploaded by

Yill Sanchez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views3 pages

Interfacing KS0108 Arduino

This document provides a step-by-step guide for interfacing a 192x64 display, such as the KS0108, with an Arduino microcontroller. It includes details on gathering components, wiring the display, installing necessary libraries, writing and uploading code to display text. The guide aims to help users set up the display and troubleshoot any issues they may encounter.

Uploaded by

Yill Sanchez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Interfacing with a 192x64 display, such as the KS0108, typically involves using a

microcontroller like an Arduino. Here are the general steps to get you started:

1. Gather Components

• 192x64 Display (e.g., KS0108)


• Microcontroller (e.g., Arduino Uno)
• Connecting Wires
• Potentiometer (for contrast adjustment)
• Power Supply (5V)

2. Wiring the Display


Connect the display to the Arduino as follows:

• VSS (Pin 1): Connect to GND


• VDD (Pin 2): Connect to 5V
• VO (Pin 3): Connect to the middle pin of the potentiometer
• RS (Pin 4): Connect to a digital pin on the Arduino (e.g., D8)
• R/W (Pin 5): Connect to GND
• E (Pin 6): Connect to a digital pin on the Arduino (e.g., D9)
• DB0-DB7 (Pins 7-14): Connect to digital pins on the Arduino (e.g., D2-D7)
• CS1, CS2, CS3 (Pins 15-17): Connect to digital pins on the Arduino (e.g., D10, D11,
D12)
• RST (Pin 18): Connect to a digital pin on the Arduino (e.g., D13)
• VOUT (Pin 19): Connect to one end of the potentiometer
• LED+ (Pin 20): Connect to 5V through a current-limiting resistor
• LED- (Pin 21): Connect to GND

3. Install Libraries
Install the U8g2 library in the Arduino IDE:

1. Open the Arduino IDE.


2. Go to Sketch > Include Library > Manage Libraries.
3. Search for U8g2 and install it.

4. Write the Code


Here’s a basic example to initialize and display text on the 192x64 display:
#include <U8g2lib.h>

// Initialize the display

U8G2_KS0108_192X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10,


/* dc=*/ 9, /* reset=*/ 8);

void setup() {

u8g2.begin();

void loop() {

u8g2.clearBuffer(); // Clear the internal memory

u8g2.setFont(u8g2_font_ncenB08_tr); // Choose a suitable font

u8g2.drawStr(0,10,"Hello World!"); // Write something to the display

u8g2.sendBuffer(); // Transfer internal memory to the display

delay(1000);

5. Upload the Code

1. Connect your Arduino to your computer.


2. Open the Arduino IDE.
3. Copy and paste the code above into a new sketch.
4. Select the correct board and port from the Tools menu.
5. Click the Upload button.

This should get your 192x64 display up and running with basic text output. If you
encounter any issues, feel free to ask for more help!
Otras paginas de referencia:

https://simple-circuit.com/interfacing-arduino-with-ks0108-glcd-graphics-display-128x64-pixel/

KS0108_GLCD - Arduino Reference

You might also like