Scribd
Upload
17 views

CodeScan Report_1

The Autoscan report for a 2018 Peugeot 301 with VIN VF3DD9HJCJJ518872 indicates multiple faults across various systems, particularly in the Built-in Systems Interface and Engine management ECU. Notable issues include faults related to exterior temperature sensor, brake lamp controls, and engine preheating. Readiness monitors show that all tests are complete, indicating the vehicle's emissions systems are functioning correctly.

Uploaded by

James Cadavid
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

CodeScan Report_1

The Autoscan report for a 2018 Peugeot 301 with VIN VF3DD9HJCJJ518872 indicates multiple faults across various systems, particularly in the Built-in Systems Interface and Engine management ECU. Notable issues include faults related to exterior temperature sensor, brake lamp controls, and engine preheating. Readiness monitors show that all tests are complete, indicating the vehicle's emissions systems are functioning correctly.

Uploaded by

James Cadavid
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Report Type:Autoscan report

Vehicle System Report


Vehicle Information Data: 09/26/24 12:07:54 p.m.

VIN: VF3DD9HJCJJ518872

MAKE: Peugeot

YEAR: 2018

MODEL: 301

ENGINE: 1600

MILEAGE: 101997

SYSTEM: CodeScan

LICENSE PLATE: EHV425

CODE SCAN RESULTS


System Analyzed:11
BSI(Built-in Systems Interface):20
Engine management ECU:3
Anti-lock Braking System (ABS) or Electronic Stability Program (ESP):1
Air bags and pre-tensioners control unit:0
Controls under the steering wheel:0
Power steering:0
Instrument panel:0
Parking assistance:0
Multiplexed control panel:0
Intrusion alarm siren:0
Telematic unit(RTX) or audio-navigation:0

BSI(Built-in Systems Interface)


B132C1B | Exterior temperature sensor fault |
B115362 | Windscreen wiper park information fault |
B116415 | Right-hand brake lamp control fault |
B116515 | Left-hand brake lamp control fault |
B117915 | Front right direction indicator and right-hand side repeater control fault |
B117815 | Front left direction indicator and left-hand side repeater control fault |
B116A15 | Rear left fog lamp control fault |
B116815 | Rear right direction indicator control fault |
B113715 | Front right dipped headlamp control fault |
B113815 | Front left dipped headlamp control fault |
B114C15 | Rear right side lamp control fault |
B114D15 | Rear left side lamp control fault |
B117515 | Additional brake lamp control fault |
B116215 | Boot lighting control fault. |
B162C12 | Fault: accessories positive relay control and status not coherent |
B170711 | Central locking switch status fault |
B141800 | Fault in the status of the seat belt fastening information for determining the presence of the driver |
B13041A | Evaporator sensor fault |
B101196 | Power output temporarily deactivated |
U1F0000 | Fault event not stored in the faults log |

Engine management ECU


U1218 | Intersystems CAN(characterisation of the fault: One of the parameters present in a Data stream
transmitted by the BSI is invalid) | Permanent fault
P1536 | Measurement of the brake pedal position(characterisation of the fault: Incoherence between the two
brake sensors detected under deceleration) | Intermittent fault
P1352 | Engine preheating(characterisation of the fault: Fault on the relay or on the pre-heating plugs) |
Intermittent fault

Anti-lock Braking System (ABS) or Electronic Stability Program (ESP)


C1384 | Stop lamps information fault | Permanent fault

READINESS MONITORS
Tests Complete
Misfire
Fuel System
Comprehensive Component
EGR/VVT
Catalyst
Evaporative System
Oxygen Sensor
Oxygen Sensor Heater

You might also like