Scribd
Upload
2 views

Assignment Unit 5

The document outlines assignments related to isometric and perspective projections involving various geometric shapes such as cones, pyramids, cylinders, prisms, and cubes. Each assignment specifies the dimensions and orientations of the shapes, along with the required views to be constructed, either isometric or perspective. The tasks involve applying principles of geometry and projection techniques to visualize the truncated or complete forms of the specified solids.

Uploaded by

nishanthkavin123
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

Assignment Unit 5

The document outlines assignments related to isometric and perspective projections involving various geometric shapes such as cones, pyramids, cylinders, prisms, and cubes. Each assignment specifies the dimensions and orientations of the shapes, along with the required views to be constructed, either isometric or perspective. The tasks involve applying principles of geometry and projection techniques to visualize the truncated or complete forms of the specified solids.

Uploaded by

nishanthkavin123
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS

Assignment

1. A cone of base diameter 50 mm and height 55 mm is resting on its base on the HP. It
is cut by a plane perpendicular to the VP and inclined at 30° to the HP. The plane meets
the axis at a distance of 25 mm from the apex. Construct the isometric view of the
truncated cone.
2. A pentagonal pyramid of base edge 25 mm and height 60 mm rests vertically on its
base on the HP with one of its base edges parallel to VP. It is cut by a plane inclined at
60° to HP and passes through a point 35 mm from the apex. Develop the isometric
view of the truncated pyramid.
3. Construct the isometric view of a frustum of a cone of base diameter 60 mm, top face
diameter 30 mm and height of 55 mm, when its axis is vertical.
4. A cylinder of diameter 40 mm and height 40 mm rests on the GP on one of its ends
with its axis 35 mm behind the picture plane. The station point is 45 mm to the right
of the axis. The station point is 65 mm above the GP and 40 mm in front of the PP.
Construct the perspective view of the cylinder by visual ray method.
5. A hexagonal prism of base side 30 mm and axis length 60 mm rests the HP with two
base edges parallel to the VP. It is cut by a section plane perpendicular to the VP and
inclined at 50° to the HP bisecting the axis of the prism. Develop the isometric view of
the truncated prism.
6. Construct the isometric view of a cylinder of diameter 46 mm and height 60 mm when
it is resting on one of its ends on the HP. It is cut by a plane perpendicular to the VP
and inclined at 45° to the HP. The plane passes through a point on the axis located at
15 mm from the top.
7. Construct the isometric view of a frustum of a hexagonal pyramid when it is resting on
its base on the HP with two sides of the base parallel to the VP. The side of base is 20
mm and top are 8 mm. The height of the frustum is 55 mm.

1. A square prism of 25 mm side of base and height 40 mm rests with its base on the
ground such that one of the rectangular faces is inclined at 30° to the picture plane.
The nearest vertical edge touches the picture plane. The station point is 50 mm in front
of the picture plane, 60 mm above the ground and lies opposite to the nearest vertical
edge that touches the picture plane. Construct the perspective view.
2. A regular hexagonal pyramid of base edge 20 mm and height 35 mm rests on its base
on the ground plane with one of its base edges touching the picture plane. The station
point is 30 mm above the ground plane and 40 mm in front of the PP. The central plane
is 30 mm to the right of the axis. Construct the perspective projection of the pyramid
by visual ray method. Use the top view and the front view.
3. Construct the perspective projection of a cube of 25 mm edge, lying on a face on the
ground plane, with an edge touching the picture plane and all vertical faces equally
inclined to the picture plane. The station point is 50 mm in front of the picture plane,
35 mm above the ground plane and lies in a central plane which is 10 mm to the left
of the centre of the cube.
4. Construct the perspective view of a pentagonal prism of base side 20 mm and height
40 mm when it rests on its base on the ground plane with one of its rectangular faces
parallel to and 20 mm behind the picture plane. The station point is 45 mm in front of
the PP and 60 mm above the GP. The is 20 mm to the left of the axis. Use the top view
and the end view (front view) to draw the perspective by visual ray method.
5. A square prism of base 25 x 25 mm and height 40 mm rests on the GP on one of its
ends with a rectangular face receding away from the PP towards right making 60° with
PP. The corner nearest to the PP is 40 mm to the left of the station point and 20 mm
behind the PP. The station point is 60 mm above the GP and 50 mm in front of the PP.
Draw the perspective view of the prism by visual ray method. Use the top view and the
front view.

You might also like