Scribd
Upload
10 views6 pages

Purlin

The document presents a design calculation report for a proposed warehouse, focusing on the purlin design using AISI S100-16/S1-18 standards. It includes detailed calculations on load combinations, effective section properties, and strength assessments for various elements under axial compression and flexural loads. The report concludes with checks for local and distortional buckling, ensuring compliance with design parameters and material specifications.

Uploaded by

Mohamed H
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views6 pages

Purlin

The document presents a design calculation report for a proposed warehouse, focusing on the purlin design using AISI S100-16/S1-18 standards. It includes detailed calculations on load combinations, effective section properties, and strength assessments for various elements under axial compression and flexural loads. The report concludes with checks for local and distortional buckling, ensuring compliance with design parameters and material specifications.

Uploaded by

Mohamed H
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

DESIGN CALCULATION REPORT FOR THE PROPOSED WAREHOUSE

Revision : 00 Date: 03-10-2023

3. PURLINE DESIGN
DESIGN CALCULATION REPORT FOR THE PROPOSED WAREHOUSE

Revision : 00 Date: 03-10-2023

PURLINE DESIGN:-

Member Check - AISI S100-16/S1-18, US, LRFD


¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Load Combination: 1.2D+1.6Lr+L
Design Parameters at 4.8500 m:
Lx 9.7000 m Ly 9.7000 m Lt 9.7000 m
Kx 1.0000 Ky 1.0000 Kt 1.0000

Section: Section 1.cfss


Material Type: A36, Fy=248.21 MPa
Cbx 1.1364 Cby 1.0000 ex 0.0000 mm
Cmx 1.0000 Cmy 1.0000 ey 0.0000 mm
Braced Flange: None k 0 kN
Red. Factor, R: 0 Lm 10.0000 m

Loads: P Mx Vy My Vx
(kN) (kN-m) (kN) (kN-m) (kN)
Total 0.00 9.879 0.00 0.000 0.00
Applied 0.00 9.879 0.00 0.000 0.00
Strength 31.08 11.040 121.33 7.688 94.52

Effective section properties at applied loads:


Ae 2112.1 mm^2 Ixe 37922060 mm^4 Iye 4180935 mm^4
Sxe(t) 216698 mm^3 Sye(l) 36081 mm^3
Sxe(b) 216698 mm^3 Sye(r) 36081 mm^3

Interaction Equations
Eq. H1.2-1 (P, Mx, My) 0.000 + 0.895 + 0.000 = 0.895 <= 1.0
Eq. H2-1 (Mx, Vy) Sqrt(0.040 + 0.000)= 0.200 <= 1.0
Eq. H2-1 (My, Vx) Sqrt(0.000 + 0.000)= 0.000 <= 1.0

Calculation Details - AISI S100-16/S1-18, US, LRFD


¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Axial Compression Strength
(KL/r)x=72.391, (KL/r)y=218.02
ex=383.06 MPa Eq. F2.1.2-2
ey=42.233 MPa Eq. F2.1.1-4
t=62.693 MPa Eq. F2.1.1-5
Fcre=19.742 MPa Analytical
Fy=248.21 MPa
c=3.5458 Eq. E2-4
Fn=17.314 MPa Eq. E2-3
Pne=36.569 kN
Local buckling (EWM)
Effective width calculations for part 1: Stiffened Zee
Element 1: Unstiffened, w=22.888 mm
f1=17.314 MPa, f2=17.314 MPa
=1 Eq. 1.2.2-1
k=0.43 Eq. 1.2.2-3
=0.094092 Eq. 1.1-3
<0.673 (fully effective) Eq. 1.1-1
Element 2: Check for lip stiffener reduction
S=138.73 Eq. 1.3-7
DESIGN CALCULATION REPORT FOR THE PROPOSED WAREHOUSE

Revision : 00 Date: 03-10-2023

w/t < 0.328S (no lip reduction)


Element 2: Stiffened, w=92.788 mm
f1=17.314 MPa, f2=17.314 MPa
=1 Eq. 1.1.2-1
k=4 Eq. 1.1.2-8
=0.12507 Eq. 1.1-3
=1 Eq. 1.1-2
be=92.788 mm Eq. 1.1-1
b1=46.394 mm Eq. 1.1.2-9
b2=46.394 mm Eq. 1.1.2-10
b1+b2 > compression width (fully effective)
Element 3: Stiffened, w=339.8 mm
f1=17.314 MPa, f2=17.314 MPa
=1 Eq. 1.1.2-1
k=4 Eq. 1.1.2-8
=0.45802 Eq. 1.1-3
=1 Eq. 1.1-2
be=339.8 mm Eq. 1.1-1
b1=169.9 mm Eq. 1.1.2-9
b2=169.9 mm Eq. 1.1.2-10
b1+b2 > compression width (fully effective)
Element 5: Unstiffened, w=22.888 mm
f1=17.314 MPa, f2=17.314 MPa
=1 Eq. 1.2.2-1
k=0.43 Eq. 1.2.2-3
=0.094092 Eq. 1.1-3
<0.673 (fully effective) Eq. 1.1-1
Element 4: Check for lip stiffener reduction
S=138.73 Eq. 1.3-7
w/t < 0.328S (no lip reduction)
Element 4: Stiffened, w=92.788 mm
f1=17.314 MPa, f2=17.314 MPa
=1 Eq. 1.1.2-1
k=4 Eq. 1.1.2-8
=0.12507 Eq. 1.1-3
=1 Eq. 1.1-2
be=92.788 mm Eq. 1.1-1
b1=46.394 mm Eq. 1.1.2-9
b2=46.394 mm Eq. 1.1.2-10
b1+b2 > compression width (fully effective)

Ae=2112.1 mm^2
Pnl=36.569 kN Eq. E3.1-1
c=1.8, c=0.85

Distortional buckling for part 1 elements 1 to 2


Af=444.12 mm^2, Ixf=7737.5 mm^4, Iyf=532540 mm^4, Ixyf=-37068 mm^4
xof=38.33 mm, yof=1.6806 mm, Cwf=119.38 mm^6, Jf=1918.6 mm^4
hxf=-61.015 mm, ho=350 mm, tweb=3.6 mm
Lcrd=671.31 mm Eq. 2.3.1.3-7
kfe=8.2395 kN Eq. 2.3.1.3-3
kwe=4.9658 kN Eq. 2.3.1.3-4
k=0 kN
kfg=48.761 mm^2 Eq. 2.3.1.3-5
kwg=56.34 mm^2 Eq. 2.3.1.3-6
DESIGN CALCULATION REPORT FOR THE PROPOSED WAREHOUSE

Revision : 00 Date: 03-10-2023

Fcrd=125.64 MPa Eq. 2.3.1.3-2


Pcrd=265.37 kN Eq. 2.3.1.3-1
Pnd=290.55 kN Eq. E4.1-2
c=1.8, c=0.85

Flexural Strength about X-axis


ey=42.233 MPa Eq. F2.1.1-4
t=62.693 MPa Eq. F2.1.1-5
Cb=1.1364 Eq. F2.1.1-2
Fcre=56.608 MPa Analytical
Mcre=12.267 kN-m
Fy=248.21 MPa
Fn=56.608 MPa Eq. F2.1-5
Mne=12.267 kN-m
Local buckling (EWM)
Effective width calculations for part 1: Stiffened Zee
Element 1: No compressive stress (fully effective)
Element 2: No compressive stress (fully effective)
Element 3: Stiffened, w=339.8 mm
f1=54.958 MPa, f2=-54.958 MPa
=1 Eq. 1.1.2-1
k=24 Eq. 1.1.2-2
=0.33314 Eq. 1.1-3
=1 Eq. 1.1-2
be=339.8 mm Eq. 1.1-1
ho=350 mm, bo=100 mm, ho/bo=3.5
b1=84.95 mm Eq. 1.1.2-3
b2=169.9 mm Eq. 1.1.2-4
Compression width=169.9 mm
b1+b2 > compression width (fully effective)
Element 5: Unstiffened, w=22.888 mm
f1=55.713 MPa, f2=50.478 MPa
=0.90604 Eq. 1.2.2-1
k=0.46387 Eq. 1.2.2-2
=0.1625 Eq. 1.1-3
<0.673 (fully effective) Eq. 1.1-1
Element 4: Check for lip stiffener reduction
S=77.124 Eq. 1.3-7
Ia=0.015932 mm^4 Eq. 1.3-8
Is=1842.9 mm^4 > Ia (no lip reduction)
k=3.9028 Table 1.3-1
Element 4: Partially stiffened, w=92.788 mm
f=56.026 MPa, k=3.9028
=0.22776 Eq. 1.1-3
<0.673 (fully effective) Eq. 1.1-1

Center of gravity shift: y=0 mm


Sec=216700 mm^3
Mnl=12.267 kN-m Eq. F3.1-1
b=1.67, b=0.9

Distortional buckling for part 1 elements 4 to 5


Af=444.12 mm^2, Ixf=7737.5 mm^4, Iyf=532540 mm^4, Ixyf=-37068 mm^4
xof=38.33 mm, yof=1.6806 mm, Cwf=119.38 mm^6, Jf=1918.6 mm^4
hxf=-61.015 mm, ho=350 mm, tweb=3.6 mm
DESIGN CALCULATION REPORT FOR THE PROPOSED WAREHOUSE

Revision : 00 Date: 03-10-2023

Lcrd=608.85 mm Eq. 2.3.3.3-4


kfe=11.318 kN Eq. 2.3.1.3-3
kwe=10.123 kN Eq. 2.3.3.3-5
k=0 kN
kfg=59.278 mm^2 Eq. 2.3.1.3-5
kwg=11.009 mm^2 Eq. 2.3.3.3-6
Fcrd=305.06 MPa Eq. 2.3.3.3-2
Mcrd=66.792 kN-m Eq. 2.3.3.3-1
Mnd=45.243 kN-m Eq. F4.1-2
b=1.67, b=0.9

Flexural Strength about Y-axis


ex=383.06 MPa Eq. F2.1.2-2
t=62.693 MPa Eq. F2.1.1-5
Cb=1 Eq. F2.1.1-2
Fcre=901.05 MPa Analytical
Mcre=32.51 kN-m
Fy=248.21 MPa
Fn=248.21 MPa Eq. F2.1-3
Not subject to lateral-torsional buckling - same as fully braced strength

Inelastic Reserve
Mne=9.8442 kN-m F2.4.2-1
b=1.67, b=0.9

Distortional buckling for part 1 elements 4 to 5


Af=444.12 mm^2, Ixf=7737.5 mm^4, Iyf=532540 mm^4, Ixyf=-37068 mm^4
xof=38.33 mm, yof=1.6806 mm, Cwf=119.38 mm^6, Jf=1918.6 mm^4
hxf=-61.015 mm, ho=350 mm, tweb=3.6 mm
Lcrd=617.54 mm Analytical
kfe=10.803 kN Eq. 2.3.1.3-3
kwe=9.0626 kN Analytical
k=0 kN
kfg=43.162 mm^2 Analytical
kwg=0 mm^2 Analytical
Fcrd=460.27 MPa Eq. 2.3.3.3-2
Mcrd=16.607 kN-m Eq. 2.3.3.3-1
Mnd=8.5417 kN-m Eq. F4.1-2
b=1.67, b=0.9

Effective section at applied loads


Effective width calculations for part 1: Stiffened Zee
Element 1: No compressive stress (fully effective)
Element 2: No compressive stress (fully effective)
Element 3: Stiffened, w=339.8 mm
f1=44.262 MPa, f2=-44.262 MPa
=1 Eq. 1.1.2-1
k=24 Eq. 1.1.2-2
=0.29897 Eq. 1.1-3
=1 Eq. 1.1-2
be=339.8 mm Eq. 1.1-1
ho=350 mm, bo=100 mm, ho/bo=3.5
b1=84.95 mm Eq. 1.1.2-3
b2=169.9 mm Eq. 1.1.2-4
Compression width=169.9 mm
DESIGN CALCULATION REPORT FOR THE PROPOSED WAREHOUSE

Revision : 00 Date: 03-10-2023

b1+b2 > compression width (fully effective)


Element 5: Unstiffened, w=22.888 mm
f1=44.87 MPa, f2=40.654 MPa
=0.90603 Eq. 1.2.2-1
k=0.46387 Eq. 1.2.2-2
=0.14584 Eq. 1.1-3
<0.673 (fully effective) Eq. 1.1-1
Element 4: Check for lip stiffener reduction
S=85.938 Eq. 1.3-7
w/t < 0.328S (no lip reduction)
Element 4: Stiffened, w=92.788 mm
f1=45.122 MPa, f2=45.122 MPa
=1 Eq. 1.1.2-1
k=4 Eq. 1.1.2-8
=0.2019 Eq. 1.1-3
=1 Eq. 1.1-2
be=92.788 mm Eq. 1.1-1
b1=46.394 mm Eq. 1.1.2-9
b2=46.394 mm Eq. 1.1.2-10
b1+b2 > compression width (fully effective)
Maximum Shears, Moments, and Deflections
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Envelope of All Combinations, Y Direction

Location Shear(l) Shear(r) Reaction


(m) (kN) (kN) (kN)
0.0000 0.0000 4.0740 4.0740
9.7000 -4.0740 0.0000 4.0740

Location Moment Location Deflection


(m) (kN-m) (m) (mm)
4.8500 9.8795 4.8500 -12.554

You might also like