Scribd
Upload
110 views1 page

PB100

The Broadcom BCM89884 is a single-port automotive Ethernet transceiver that supports both 1000BASE-T1 and 100BASE-T1 standards, designed to meet automotive specifications for EMI/EMC and noise cancellation. It integrates various features such as low-pass filters, cable diagnostics, and advanced low-power management, while being compliant with RGMII interface specifications. The device operates over a wide temperature range and is packaged in a 40-pin WQFN format.

Uploaded by

a602593453
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views1 page

PB100

The Broadcom BCM89884 is a single-port automotive Ethernet transceiver that supports both 1000BASE-T1 and 100BASE-T1 standards, designed to meet automotive specifications for EMI/EMC and noise cancellation. It integrates various features such as low-pass filters, cable diagnostics, and advanced low-power management, while being compliant with RGMII interface specifications. The device operates over a wide temperature range and is packaged in a 40-pin WQFN format.

Uploaded by

a602593453
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Brief

BCM89884
Single-Port Automotive Ethernet
Transceiver
Overview
The Broadcom® BCM89884 is a 1000BASE-T1/100BASE-T1 automotive
Key Features Ethernet transceiver integrated into a single monolithic CMOS chip that
• Fully compliant with IEEE 802.3bw meets all AEC-Q100 requirements. The device performs all the physical
100BASE-T1 and IEEE 802.3bp layer (PHY) functions for 1000BASE-T1 and 100BASE-T1 encoded Ethernet
1000BASE-T1
packets over a single-pair of unshielded twisted-pair (UTP) cable or
− Integrated twisted-pair termination shielded twisted-pair (STP) cable.
resistors
− Trace matched output impedance The BCM89884 is designed to meet automotive specifications for EMI/
− Integrated low-pass filter EMC, noise cancellation, and transmission jitter, providing consistent
and reliable operation over a broad range of existing single twisted-pair
− Polarity detection and auto
correction for 1000BASE-T1 automotive cable.
− Polarity detection and auto/ The BCM89884 is based on the proven digital-signal processor technology
manual detection for 100BASE-T1
by Broadcom that combines digital adaptive equalizers, ADCs, phase-
− Super Isolate mode locked loops, line drivers, encoders, decoders, echo cancelers, and all
− Automotive Cable Diagnostics the other required support circuitry. The BCM89884 is designed to be
support compliant with the RGMII interface specifications, allowing compatibility
− Robust Cable ESD (CESD) with industry-standard Ethernet media access controllers (MACs) and
tolerance switch controllers.
• Support for 1000BASE-T1/
Functional Block Diagram
100BASE-T1 TC10
TRDP MDI TXD[3:0]*
• Support for 1.8V, 2.5V, or 3.3V RGMII Transceiver
Symbol
TX_EN
TRDN Encoder
GTXCLK
• Line loopback TVCO* Test Clock Out
Symbol RXD[3:0]*
RDAC BIAS
RX_DV
• Low EMI emissions and high Decoder/
Aligner RXC*
AN_EN*
immunity MS*
MDI
Configuration
SPDO*
• Support for packets up to 16 KB in
CLK_SEL*
1000BASE-T1 mode XTALO
Clock
Generator LED
XTALI LED4*
• Advanced low-power management Drivers

with local and remote wake-up


MDC*
support INT_N* Global Interrupt
MII MII Mgmt
MDIO
PAR_WAKE_DISABLE Registers Control
• Integrated LDO and Switching PSD_WAKE PHYA0
Passive Signal
regulators allow single 3.3V supply PSD_INH Detect SYNC_IO*
PSD_RVBAT IEEE 1588/
operation SYNC_E
SYNC_IN*
REC_CLK*
• IEEE 1149.1 (JTAG) boundary scan LDO_VCNTL LDO JT_EN_N*
LDO_SENSE Regulator (1.8V)
TRST_N*
• 40-pin WQFN package VREG_AVDDH
JTAG
TCK*
SWR_PDRV TDI*
Switching
• Pin compatible with the BCM89884M SWR_NDRV
Regulator (1.0V)
TDO*
SWR_SENSE TMS*
• Operating Temperature Range:
–40°C to +125°C (Grade 1) * These signals have multiple functions.

For more product information: broadcom.com


Copyright © 2024 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.
All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies.
89884-PB100 March 1, 2024

You might also like