Scribd
Upload
47 views4 pages

2020M0016 How To Upgrade SDongle WLAN-FE Locally Using Fusion Solar App

This document provides instructions for upgrading the SDongle WLAN-FE using the Fusion Solar App, specifically for users with Android OS. It outlines prerequisites, including the necessary firmware version, and steps for performing the upgrade. For further assistance, users are directed to contact Huawei's support via email.

Uploaded by

costelchelariu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views4 pages

2020M0016 How To Upgrade SDongle WLAN-FE Locally Using Fusion Solar App

This document provides instructions for upgrading the SDongle WLAN-FE using the Fusion Solar App, specifically for users with Android OS. It outlines prerequisites, including the necessary firmware version, and steps for performing the upgrade. For further assistance, users are directed to contact Huawei's support via email.

Uploaded by

costelchelariu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Huawei Solar Inverter Document Public

How to upgrade SDongle WLAN-FE locally using


Fusion Solar App

Huawei Technologies Co. Ltd.

Version Created by Date Remarks


01 Huawei g84156908 27.02.2021 Original

The information in this document may contain predictive statements including, without limitation, statements
regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number
of factors that could cause actual results and developments to differ materially from those expressed or implied in the
predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an
offer nor an acceptance. Huawei may change the information at any time without notice.

2021-02-27 [email protected] Page1, Total4


Huawei Solar Inverter Document Public

This document describes how to upgrade SDongle WLAN-FE using Fusion Solar App.
The software version needs to be provided by service engineers.
Contact [email protected] for more information.

Prerequisites:

Only Android OS is supported.


The SDongle that needs to be upgraded should have firmware version
SDongleV100R001C00SPC115 or later, otherwise the upgrade cannot be performed locally.

1. Unplug and plug-in again the SDongle

The WLAN-FE dongle has hotspots only within 3 minutes after it is powered on. In order to
upgrade the inverter locally, the SDongle needs to be disconnected and connected again to the
USB port of the inverter.

2. Connect locally on SDongle

*Before to connect it, disable Mobile Data and Enable Wi-Fi of your phone

2021-02-27 [email protected] Page2, Total4


Huawei Solar Inverter Document Public

3. Upgrade SDongle software

2021-02-27 [email protected] Page3, Total4


Huawei Solar Inverter Document Public

Huawei Enterprise Technical Assistant Center will assist you 24x7

E-mail: [email protected]

2021-02-27 [email protected] Page4, Total4

You might also like