ULS Series Condenser Microphones

Description Features
The AKG C 480 B preamplifier powering unit is the latest
model in the ULS series. It accommodates the CK 61/ULS, • Ultralow noise preamplifier for use
CK 62/ULS, CK 63/ULS capsules and the new CK 69/ULS
shotgun capsule, providing a higher order of performance for with ULS series capsules
these capsules than heretofore available. The new preamp
has a vastly improved noise floor, permitting self noise
• Multiple directional capsules and
performance with the four associated capsules in the range configurations available on a high
of 9 to 11 dB-A. Maximum sound pressure levels in the range
of 144 dB (in the -10 dB sensitivity position) can be attained
performance powering/preamp
with no greater than 0.5% distortion, giving the capsules a module
new level of overall performance. An integral low cut filter
(12 dB/octave) can be set for either 150 or 70 Hz. The +6 dB • Extremely flat on-axis response for
sensitivity position is intended to enhance the performance of
the CK 69/ULS interference tube capsules, which normally
all models
operate over large distances. With the available CK 61/ULS • Three sensitivity settings
cardioid, CK 63/ULS hypercardioid, CK 62/ULS
omnidirectional, and highly directional CK 69/ULS shotgun (0, +6, and -10 dB)
element, the C 480 Series is intended primarily for studio, • High acoustic level capability
broadcast and a variety of live sound and speech
reinforcement applications in which state-of-the-art
performance is mandated. A complete line of optional
accessories is available. The C 480 B operates only on 48
volts phantom powering.
Graphical Data
CK 61/ULS On-axis Frequency Response Polar Response
(measured at 1 meter)

AKG is constantly improving and modifying its products, therefore, specifications are subject to change without notice.
CK 62/ULS On-axis Frequency Response Polar Response
(measured at 1 meter)

CK 63/ULS On-axis Frequency Response Polar Response

(measured at 1 meter)

CK 69/ULS On-axis Frequency Response Polar Response

(measured at 1 meter)
Architects and Engineers Specifications
C 480 B with CK 61/ULS
The microphone shall be of the condenser type with capsule and The polar pattern shall be cardioid and nominal on-axis
powering module assembly no larger than 0.8 in. (21 mm) frequency response shall be 20 Hz-20 kHz. For the normal
in diameter. The microphone shall accept phantom powering at sensitivity setting of 0 dB, microphone sensitivity shall be at
48 volts. The nominal output impedance shall be equal to or least 20 mV/Pa, and the self noise floor shall be no higher than
less than 150 ohms at 1 kHz, and the output shall be 11 dB-A. The 0.5% THD operating level shall be no lower than
transformerless. The microphone shall provide a three position 140 dB SPL.
control for normal (0 dB), elevated sensitivity (+6 dB), and The microphone shall be the AKG Model C 480 B preamp
attenuated (-10 dB) sensitivity. Switchable low-frequency cuts at operating with the AKG Acoustics Model CK 61/ULS capsule.
150 Hz and 75 Hz at 12 dB/octave shall be provided.

C 480 B with CK 62/ULS

The microphone shall be of the condenser type with capsule The polar pattern shall be omnidirectional and nominal on-axis
and powering module assembly no larger than 0.8 in. (21 mm) frequency response shall be 20 Hz-20 kHz. For the normal
in diameter. The microphone shall accept phantom powering at sensitivity setting of 0 dB, microphone sensitivity shall be at
48 volts. The nominal output impedance shall be equal to or least 20 mV/Pa, and the self noise floor shall be no higher than
less than 150 ohms at 1 kHz, and the output shall be 11 dB-A. The 0.5% THD operating level shall be no lower than
transformerless. The microphone shall provide a three position 140 dB SPL.
control for normal (0 dB), elevated sensitivity (+6 dB), and The microphone shall be the AKG Model C 480 B preamp
attenuated (-10 dB) sensitivity. Switchable low-frequency cuts at operating with the AKG Acoustics Model CK 62/ULS capsule.
150 Hz and 75 Hz at 12 dB/octave shall be provided.

C 480 B with CK 63/ULS

The microphone shall be of the condenser type with capsule and The polar pattern shall be hypercardioid and nominal on-axis
powering module assembly no larger than 0.8 in. (21 mm) frequency response shall be 20 Hz-20 kHz. For the normal
in diameter. The microphone shall accept phantom powering at sensitivity setting of 0 dB, microphone sensitivity shall be at least
48 volts. The nominal output impedance shall be equal to or less 20 mV/Pa, and the self noise floor shall be no higher than 11 dB-A.
than 150 ohms at 1 kHz, and the output shall be transformerless. The 0.5% THD operating level shall be no lower than 140 dB SPL.
The microphone shall provide a three position control for normal (0 The microphone shall be the AKG Model C 480 B preamp
dB), elevated sensitivity (+6 dB), and attenuated (-10 dB) sensitivity. operating with the AKG Acoustics Model CK 63/ULS capsule.
Switchable low-frequency cuts at 150 Hz and 75 Hz at 12
dB/octave shall be provided.

C 480 B with CK 69/ULS

The microphone shall be of the condenser type with on-axis frequency response shall be 20 Hz-18 kHz. For the
capsule and powering module assembly no larger than normal sensitivity setting of 0 dB, microphone sensitivity shall
0.8 in. (21 mm) in diameter. The microphone shall accept phantom be at least 27 mV/Pa, and the self noise floor shall be no
powering at 48 volts. The nominal output higher than 9 dB-A. The 0.5% THD operating level shall be no
impedance shall be equal to or less than 150 ohms at lower than 140 dB SPL.
1 kHz, and the output shall be transformerless. The microphone The microphone capsule shall consist of two sections. The
shall provide a three position control for total length of the microphone with a single capsule length shall
normal (0 dB), elevated sensitivity (+6 dB), and attenuated be no greater than 12.8 in. (326 mm), and for the dual capsule
(-10 dB) sensitivity. Switchable low-frequency cuts at the length shall be no greater than 18.4 in. (467 mm).
150 Hz and 75 Hz at 12 dB/octave shall be provided. The microphone shall be the AKG Model C 480 B preamp
The polar pattern shall be two-section shotgun and nominal operating with the AKG Acoustics Model CK 69/ULS capsule.
Specifications (measured with C 480 B preamp)
Models: CK 61/ULS: CK 62/ULS: CK 63/ULS: CK 69/ULS:
Transducer Principle: All models externally polarized condenser capsules.
Frequency Range 20–20,000 Hz ± 1 dB 20–20,000 Hz ± 1 dB 20–20,000 Hz ± 1 dB 20–18,000 Hz ± 2 dB
Polar Pattern: Cardioid Omnidirectional Hypercardioid Shotgun (2-section)
Sensitivity at 1,000 Hz:
(0 dB setting): 20 mV/Pa; -34 dBV 20 mV/Pa; -34 dBV 20 mV/Pa; -34 dBV 27 mV/Pa; -31 dBV
(+6 dB setting): 40 mV/Pa; -28 dBV 40 mV/Pa; -28 dBV 40 mV/Pa; -28 dBV 54 mV/Pa; -25 dBV
(-10 dB setting): 6.3 mV/Pa; -44 dBV 6.3 mV/Pa; -44 dBV 6.3 mV/Pa; -44 dBV 8.5 mV/Pa; -41 dBV
Equivalent Noise Level:
(0 dB setting): 11 dB-A 11 dB-A 11 dB-A 9 dB-A
(+6 dB setting): 13 dB-A 13 dB-A 13 dB-A 11 dB-A
(-10 dB setting): 17 dB-A 17 dB-A 17 dB-A 15 dB-A
Max. SPL for 0.5 % THD
(0 dB setting): 140 dB 140 dB 140 dB 140 dB
(+6 dB setting): 134 dB 134 dB 134 dB 134 dB
(-10 dB setting): 144 dB 144 dB 144 dB 142 dB
S/N Ratio (:
(0 dB setting): 83 dB 83 dB 83 dB 85 dB
(+6 dB setting): 81 dB 81 dB 81 dB 83 dB
(-10 dB setting): 77 dB 77 dB 77 dB 79 dB

Model: C 480 B
Electr. Impedance: ≤ 150 ohms (transformerless)
Load Impedance: > 2,000 ohms in parallel with 1,000 pF
Power Requirement: 48 volts phantom power (±4 volts)
Connector: 3 pin XLR type
Size: dia 0.8 in. (21 mm) length 5.9 in. (150 mm)

Models: C 480 B with CK 61/ULS: C 480 B with CK 62/ULS: C 480 B with CK 63/ULS: C 480 B with CK 69/ULS:
Finish: non reflective black non reflective black non reflective black non reflective black
Size of Microphone dia 0.83 in. (21 mm) dia 0.83 in. (21 mm) dia 0.83 in. (21 mm) dia 0.83 in. (21 mm)
Combinations: length 6.8 in. (173 mm) length 6.8 in. (173 mm) length 6.8 in. (173 mm) length 12.8 in. (326 mm)
(for single section)
length 18.4 in. (467 mm)
(for dual section)
Models: CK 61/ULS: CK 62/ULS: CK 63/ULS: CK 69/ULS:
dia 0.83 in. (21 mm) dia 0.83 in. (21 mm) dia 0.83 in. (21 mm) dia 0.83 in. (21 mm)
length 1.0 in. (26.5 mm) length dia 1.0 in. (26.5 mm) length 1.0 in. (26.5 mm) length 6.9 in. (176 mm)
(for single section)
12.5 in. (317 mm)
(for dual section)
Models: C 480 B: CK 61/ULS: CK 62/ULS: CK 63/ULS: CK 69/ULS:
Net/Shipping Weigth: 3.5 oz. (100 g) 0.9 oz. (25 g) 0.9 oz. (25 g) 0.9 oz. (25 g) 2.5/3.5 oz. (70/100 g)
18 oz. (500 g) 5.3 oz. (150 g) 5.3 oz. (150 g) 5.3 oz. (150 g) 1.1 lbs. (480 g)
Included Accessories: SA 40 Stand adapter, W 32 Foam windscreen (for CK 61/ULS, 62/ULS, and 63/ULS),
Foam windscreens for both tube lengths (CK 69/ULS)
Optional Accessories: H 30 Elastic suspension, N 62 E AC Power supply, Battery power supply, SA 38 H Stand adapter/suspension,
SA 18/2B All-metal stand adapter, A 61 Swivel adapter, VR 61 12 in. (30 cm) Extension tube, W 46 All-metal windscreen,
VR 62 3 ft. (90cm) Extension tube.

Limited Warranty or consequential damages. However, the limitation of any right or remedy shall not be effective
where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our
Valid only in the United States. AKG Acoustics warrants AKG products against defects in material
service department. Be sure to include your sales slip as proof of purchase date. (We will not repair
or workmanship for a period of two years from the date of original purchase for use, and agrees to
repair or, at our option, replace any defective unit without charge for either parts or labor. Important: transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral
This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also
care, the affixing of any attachment not provided with the product, loss of parts or connecting the have other rights which vary from state to state. Some states do not allow the exclusion or
product to any but the specified receptacles. This warranty is void unless service or repairs are limitation of incidental or consequential damages or limitation on how long an implied warranty
performed by an authorized service center. No responsibility is assumed for any special, incidental lasts, so the above exclusions and limitation may not apply to you.

Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components

AKG Acoustics GmbH AKG ACOUSTICS, U.S.

Lemböckgasse 21–25, P.O.B. 158, A-1230 914 Airpark Center Drive
Vienna/AUSTRIA Nashville, TN 37217, U.S.A.
Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516 Tel: (615) 620-3800, Fax: (615) 620-3875
Internet: http://www.akg.com
Studer Japan Ltd.
AKG Acoustics; A Division of Harman Pro Germany 2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN
Bodenseestraße 228, D-81243 München/GERMANY Tel: (813) 3465-2211, Fax: (813) 3465-2214
Tel: (089) 87 16-0, Fax: (089) 87 16-200
Erikson Pro Audio
Arbiter Pro Audio 620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA
Wilberforce Road, London NW9 6AX/ENGLAND Tel: (514) 738-3000, Fax: (514) 737-5069
Tel: (0181) 202 1199, Fax: (0181) 202 7076 Internet: www.jam-ind.com/eriksonpro

Specifications subject to change without notice.

DS-ULS Series