DECLARATION

We certify that

(a) The work contained in this report has been done by us under the guidance of
our supervisor.

(b) The work has not been submitted to any other Institute for any degree or
diploma.

(c) We have conformed to the norms and guidelines given in the Ethical Code of
Conduct of the Institute.

(d) Whenever we have used materials (data, theoretical analysis, figures, and text)
from other sources, we have given due credit to them by citing them in the text
of the thesis and giving their details in the references. Further, we have taken
permission from the copyright owners of the sources, whenever necessary.

Date: 21 OCT, 2024

Aditya Raj 11212781

Snehit Garg 11212506

Ankit Raj 11212781

Sahil Sharma 11212509

Place: Mullana
 COMPUTER SCIENCE AND ENGINEERING

MAHARISHI MARKANDESHWAR UNIVERSITY

MAHARISHI MARKANDESHWAR ENGINEERING COLLEGE

MULLANA AMBALA – 133201, HARYANA, INDIA

BONAFIDE CERTIFICATE

This is to certify that the project titled BLOGGING PLATFORM

is a bonafide record of work done by Aditya Raj , Snehit Garg ,
Ankit Raj , Sahil Sharma towards fullfillment of
requirement for the award of completion of INTEGRATED PROJECT of 7th
semester of bachelor of technology computer science and engineering of the
MAHARISHI MARKANDESHWAR ENGINEERING COLLEGE, MULLANA, during
the year 2024-2025.

………………………………………………….
Ms. Kajal Mittal
Assistant Professor
Project Supervisor
 Abstract

Name of the student: Aditya Raj, Ankit Raj, Sahil Sharma, Snehit Garg
Roll No: 11212714, 11212781, 11212509, 11212506
Degree for which submitted: Bachelor of Technology
Department: Computer Science and Engineering
Thesis title: Blogging Platform
Thesis supervisor: D r . M o h i t C h h a b r a
Month and year of thesis submission: 21 OCT, 2024

Over the years, there has been a sudden increase in the number of vehicles on the road. Traffic
congestion is a growing problem everyone faces in their daily life. Manual control of traffic by
traffic police has not proved to be efficient. Also the predefined set time for the signal at all
circumstances (low and high traffic density) has not solved this problem. A model to effectively
solve the above mentioned problems by using Internet of Things (IoT) is proposed. We use
cloud for internet based computing, where different services such as server, storage and
application are delivered for traffic management. A network of sensors is used to track the
number of vehicles and the traffic congestion at the intersections on a road and rerouting will
be done on the basis of the traffic density on the lanes of a road.
Keywords: IoT, Sensors, Microcontroller.

iii
 ACKNOWLEDGEMENTS

I would like to express my sincere gratitude to all those who have helped me in completing
this project successfully.

First and foremost, I would like to thank Dr. Deepika an dMs. Kajal Mittal for their
invaluable guidance, encouragement, and support throughout the duration of this project.
Their expertise and insights have greatly contributed to the development of this Traffic
Management System, and I am deeply appreciative of their assistance.

I would also like to extend my thanks to the faculty members and staff of Maharishi
Markandeshwar Engineering College, who have provided me with the resources and
knowledge necessary for the completion of this project.

Finally, I would like to express my gratitude to my family, friends, and colleagues for their
constant support and encouragement.

Thank you all for making this project possible .

A R j(1121271 ) ....................................

S (11212 06) .................................

A R j(11212781) ....................................

Sahil Sharma(11212509) ....................................

Contents

Declaration i

Bonafide Certificate ii

Abstract iii

Acknowledgements iv

Contents v

List of Figures vi

Abbreviations ix

1 INTRODUCTION 1
1.1 Hypothesis ...................................................................................................... 1
1.2 Motivation ...................................................................................................... 1

2 LITERATURE REVIEW 3
2.1 About IoT ....................................................................................................... 3
2.2 Advantages and Disadvantages of IoT ........................................................... 4
2.2.1 Advantages.......................................................................................... 4
2.2.2 Disadvantages ..................................................................................... 5
2.3 IoT in Traffic Management............................................................................ 6

3 REQUIREMENTS 7
3.1 Hardware Components ................................................................................... 7
3.2 Software Requirement .................................................................................. 11

4 PRINCIPLE 12
4.1 Existing System............................................................................................ 12
4.1.1 Disadvantages of Existing System ................................................... 12

vi
Contents vii

4.2 Proposed System .......................................................................................... 13

4.2.1 Advantages of Proposed System ...................................................... 13
4.3 Method ......................................................................................................... 14
4.3.1 A View of Signals at Different Lanes .............................................. 15
4.4 Diagrams ....................................................................................................... 18
4.4.1 Flowchart .......................................................................................... 18
4.4.2 Sequence Diagram ............................................................................ 19
4.4.3 Use Case Diagram ............................................................................ 20
4.5 Algorithms ..................................................................................................... 20
4.5.1 Vehicle Counter Algorithm ............................................................... 20
4.5.2 Traffic Control Algorithm ................................................................. 21

5 RESULTS AND ANALYSIS 22

5.1 Results and Analysis ..................................................................................... 22
5.2 Challenges ..................................................................................................... 23

6 MISCELLANEOUS 24
6.1 Future Scope ................................................................................................ 24
6.2 Related Works .............................................................................................. 24

Conclusion 26
List of Figures

3.1 Arduino Mega 2560. ...................................................................................... 8

3.2 Arduino Uno. ................................................................................................. 9
3.3 LED for Traffic Lights. .................................................................................. 9
3.4 IR Sensors. .................................................................................................. 10
3.5 Jumper Wires............................................................................................... 10

4.1 Control of previous Intersection .................................................................. 15

4.2 Signal at Lane 1........................................................................................... 16
4.3 Signal at Lane 2........................................................................................... 16
4.4 Signal at Lane 3........................................................................................... 17
4.5 Flowchart. .................................................................................................... 18
4.6 Sequence Diagram......................................................................................... 19
4.7 Use Case Diagram. ....................................................................................... 20

5.1 Model of the Project..................................................................................... 23

viii
Abbreviations

IoT Internet of Things

IR Infra Red
LED Light Emitting Diode
WiFi Wireless Fidelity
WSN Wireless Sensor Network
NFC Near Field Communication
ITS Intelligent Transportation System

ix
Chapter 1

INTRODUCTION

1.1 Hypothesis

A smart traffic management system utilizing sensor data, communication and auto-
mated algorithms is to be developed to keep traffic flowing more smoothly. The aim
is to optimally control the duration of green or red light for a specific traffic light
at an intersection. The traffic signals should not flash the same stretch of green or
red all the time, but should depend on the number of cars present. When traffic
is heavy in one direction, the green lights should stay on longer; less traffic should
mean the red lights should be on for longer time interval. This solution is expected
to eliminate inefficiencies at intersections and minimize the cost of commuting and
pollution.

1.2 Motivation

In 2014, 54% of the total global population was urban residents. The prediction was
a growth of nearly 2% each year until 2020 leading to more pressure on the trans-
portation system of cities. Additionally, the high cost of accommodation in business
districts lead to urban employees living far away from their place of work/education
and therefore having to commute back and forth between their place of residence
and their place of work. More vehicles moving need to be accommodated over a
1
Chapter 1: Introduction 2

fixed number of roads and transportation infrastructure. Often, when dealing with
increased traffic, the reaction is just widen the lanes or increase the road levels.
However, cities should be making their streets run smarter instead of just making
them bigger or building more roads. This leads to the proposed system which will
use a micro controller and sensors for tracking the number of vehicles leading to
time based monitoring of the system.(Babu, 2016)(Zantout, 2017)
Chapter 2

LITERATURE REVIEW

2.1 About IoT

The Internet of Things (IoT), also sometimes referred to as the Internet of Ev-
erything (IoE), consists of all the web-enabled devices that collect, send and act
on data they acquire from their surrounding environments using embedded sen-
sors,processors and communication hardware. These devices, often called ”con-
nected” or ”smart” devices, can sometimes talk to other related devices, a process
called machine-to-machine(M2M) communication, and act on the information they
get from one another. Humans can interact with the gadgets to set them up, give
them instructions or access the data, but the devices do most of the work on their
own without human intervention. Their existence has been made possible by all the
tiny mobile components that are available these days, as well as the always-online
nature of our home and business networks. Connected devices also generate massive
amounts of Internet traffic, including loads of data that can be used to make the
devices useful, but can also be mined for other purposes. All this new data, and
the Internet-accessible nature of the devices, raises both privacy and security con-
cerns. But this technology allows for a level of real-time information that we have
never had before. We can monitor our homes and families remotely to keep them
safe. Businesses can improve processes to increase productivity and reduce material
waste and unforeseen downtime. Sensors in city infrastructure can help reduce road
congestion and warn us when infrastructure is in danger of crumbling. Gadgets

3
Chapter 2: Literature Review 4

out in the open can monitor for changing environmental conditions and warn us of
impending disasters.

2.2 Advantages and Disadvantages of IoT

2.2.1 Advantages

Communication: IoT encourages the communication between devices, also fa-

mously known as Machine-to-Machine (M2M) communication. Because of this, the
physical devices are able to stay connected and hence the total transparency is
available with lesser inefficiencies and greater quality.

Automation and Control: Due to physical objects getting connected and con-
trolled digitally and centrally with wireless infrastructure, there is a large amount of
automation and control in the workings. Without human intervention, the machines
are able to communicate with each other leading to faster and timely output.

Information: It is obvious that having more information helps making better de-
cisions. Whether it is mundane decisions as needing to know what to buy at the
grocery store or if your company has enough widgets and supplies, knowledge is
power and more knowledge is better.

Monitor: The second most obvious advantage of IoT is monitoring. Knowing

the exact quantity of supplies or the air quality in your home, can further provide
more information that could not have previously been collected easily. For instance,
knowing that you are low on milk or printer ink could save you another trip to the
store in the near future. Furthermore, monitoring the expiration of products can
and will improve safety.

Time: As hinted in the previous examples, the amount of time saved because of
IoT could be quite large. And in today’s modern life, we all could use more time.

Money: The biggest advantage of IoT is saving money. If the price of the tagging
and monitoring equipment is less than the amount of money saved, then the Internet
of Things will be very widely adopted. IoT fundamentally proves to be very helpful
Chapter 2: Literature Review 5

to people in their daily routines by making the appliances communicate to each other
in an effective manner thereby saving and conserving energy and cost. Allowing the
data to be communicated and shared between devices and then translating it into
our required way, it makes our systems efficient.

Efficient and Saves Time: The machine-to-machine interaction provides better

efficiency, hence; accurate results can be obtained fast. This results in saving valu-
able time. Instead of repeating the same tasks every day, it enables people to do
other creative jobs.

Better Quality of Life: All the applications of this technology culminate in in-
creased comfort, convenience, and better management, thereby improving the qual-
ity of life.

2.2.2 Disadvantages

Compatibility: Currently, there is no international standard of compatibility for

the tagging and monitoring equipment. I believe this disadvantage is the most easy
to overcome. The manufacturing companies of these equipment just need to agree to
a standard, such as Bluetooth, USB, etc. This is nothing new or innovative needed.

Complexity: As with all complex systems, there are more opportunities of failure.
With the Internet of Things, failures could sky rocket. For instance, let’s say that
both you and your spouse each get a message saying that your milk has expired,
and both of you stop at a store on your way home, and you both purchase milk.
As a result, you and your spouse have purchased twice the amount that you both
need. Or maybe a bug in the software ends up automatically ordering a new ink
cartridge for your printer each and every hour for a few days, or at least after each
power failure, when you only need a single replacement.

Privacy/Security: With all of this IoT data being transmitted, the risk of los-
ing privacy increases. For instance, how well encrypted will the data be kept and
transmitted with? Do you want your neighbors or employers to know what medica-
tions that you are taking or your financial situation? Safety: As all the household
appliances, industrial machinery, public sector services like water supply and trans-
port, and many other devices all are connected to the Internet, a lot of information
Chapter 2: Literature Review 6

is available on it. This information is prone to attack by hackers. It would be

very disastrous if private and confidential information is accessed by unauthorized
intruders.

Lesser Employment of Manpower: The unskilled workers and helpers may

end up losing their jobs in the effect of automation of daily activities. This can
lead to unemployment issues in the society. This is a problem with the advent of
any technology and can be overcome with education. With daily activities getting
automated, naturally, there will be fewer requirements of human resources, primarily,
workers and less educated staff. This may create Unemployment issue in the society.

2.3 IoT in Traffic Management

Traffic management is one of the biggest infrastructure hurdles faced by developing

countries today. Developed countries and smart cities are already using IoT and
to their advantage to minimize issues related to traffic. The culture of the car has
been cultivated speedily among people in all types of nations. In most cities, it is
common for people to prefer riding their own vehicles no matter how good or bad
the public transportation is or considering how much time and money is it going to
take for them to reach their destination.
Chapter 3

REQUIREMENTS

3.1 Hardware Components

1. Microcontroller (Arduino Mega 2560): The Arduino Mega 2560 is a micro-

controller board based on the Atmega 2560. It has 54 digital input/output pins (of
which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial
ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header,
and a reset button. It contains everything needed to support the microcontroller;
simply connect it to a computer with a USB cable or power it with a AC-to-DC
adapter or battery to get started. The Mega 2560 board is compatible with most
shields designed for the Uno and the former boards Duemilanove or Diecimila.

7
Chapter 3: Requirements 8

FIGURE 3.1: Arduino Mega 2560.

2. Microcontroller (Arduino Uno ): The Arduino UNO is an open-source micro-

controller board based on the Microchip ATmega328Pmicrocontroller and developed
by Arduino.cc. The board is equipped with sets of digital and analog input/output
(I/O) pins that may be interfaced to various expansion boards (shields) and other
circuits. The board has 14 Digital pins, 6 Analog pins, and programmable with the
Arduino IDE (Integrated Development Environment) via a type B USB cable.
Chapter 3: Requirements 9

FIGURE 3.2: Arduino Uno.

3. LEDs: LEDs are used for the purpose of signaling according to the traffic
condition.

FIGURE 3.3: LED for Traffic Lights.

4. IR Sensor: IR Sensor is used to count the vehicles on the road.

Chapter 3: Requirements 10

FIGURE 3.4: IR Sensors.

5. Jumper Wires: It is used to connect the components to each other.

FIGURE 3.5: Jumper Wires.

Chapter 3: Requirements 11

3.2 Software Requirement

1. Arduino IDE: The Arduino integrated development environment (IDE) is

a cross-platform application (for Windows, MacOS, Linux) that is written in the
programming language Java. It is used to write and upload programs to Arduino
board.
The source code for the IDE is released under the GNU General Public License,
version 2. The Arduino IDE supports the languages C and C++ using special rules
of code structuring. The Arduino IDE supplies a software library from the Wiring
project, which provides many common input and output procedures.

2. Proteus Design Suite: The Proteus Design Suite is a proprietary software tool
suite used primarily for electronic design automation. The software is used mainly
by electronic design engineers and technicians to create schematics and electronic
prints for manufacturing printed circuit boards.
Chapter 4

PRINCIPLE

4.1 Existing System

The exiting traffic system is generally controlled by the traffic police. The main
drawback of this system controlled by the traffic police is that the system is not
smart enough to deal with the traffic congestion. The traffic police official can
either block a road for more amount of time or let the vehicles on another road pass
by i.e. the decision making may not be smart enough and it entirely depends on
the official’s decision. Moreover, even if traffic lights are used the time interval for
which the vehicles will be showed green or red signal is fixed. Therefore, it may
not be able to solve the problem of traffic congestion. In India, it has been seen
that even after the presence of traffic lights, traffic police officials are on duty, which
means that in this system more manpower is required and it is not economical in
nature.(Viswanathan and Santhanam, 2013)

4.1.1 Disadvantages of Existing System

i) Traffic congestion
ii) No means to detect traffic congestion
iii) Number of accidents are more
iv) It cannot be remotely controlled

12
Chapter 4: Principles 13

v) It requires more manpower

vi) It is less economical

4.2 Proposed System

The first and primary element of this system is the wireless sensor nodes consist-
ing of sensors. The sensors interact with the physical environment means vehicles
presence or absence while the local server sends the sensors data to the central mi-
crocontroller. This system involves the 4*2 array of sensor nodes in each way. This
signifies 4 levels of Traffic and 2 lanes in each way. The sensors are ultrasonic sen-
sors which transmits status based on presence of vehicle near it. The sensor nodes
transmit at specified time intervals to the central microcontroller placed at every
intersection. The Microcontroller receives the signal and computes which road and
which lane has to be chosen based on the density of Traffic. The computed data from
Microcontroller is then transmitted to the local server through Wi-Fi connectivity.
The controller makes use of the collected data to perform the Intelligent Traffic rout-
ing. In this system, the primary aim is to gather the information of moving vehicles
based on WSN to provide them a clear path till their destinations and traffic signals
should switch automatically to give a clear way for these vehicles.(Dave, 2018)

4.2.1 Advantages of Proposed System

i) Minimizes number of accidents.

ii) Reduces fuel cost and saves time.
iii) Low budget.
iv) Easy implementation and maintenance.
v) Remotely controllable.
vi) Minimizes hassle and cost of commuting.
Chapter 4: Principles 14

4.3 Method

In this proposed system, the traffic lights are LEDs and the car counting sensor is
an ultrasonic sensor. Both blocks are connected to a Microcontroller using physical
wires. The Microcontroller is the traffic light controller which receives the collected
sensor data and manages the traffic lights by switching between green, yellow and
red. The Microcontroller computes the number of cars in the street of the inter-
section it is monitoring based on the distances measured by the ultrasonic sensor
and the timing between those measurements. The Microcontroller then sends the
number of cars every minute to the local server. This communication is done using
the Microcontroller serial port. The local server exchanges the data received with
the cloud server in order to better predict the changes in timings of the traffic light.
This communication is done using Wi-Fi. More specifically, the cloud server uses
an equation that takes the data received (number of cars) as input then determines
the time interval of LEDs needed for a smooth traffic flow. This calculated time
is then compared to the current actual time of the LEDs (this data is saved in a
database on the cloud server). The server then comes up with a decision. If the
current actual green time is less than the calculated time, the decision is to increase
the green time, else to decrease the green time.(Chandana K K, 2013)
Chapter 4: Principles 15

4.3.1 A View of Signals at Different Lanes

FIGURE 4.1: Control of previous Intersection

In the above figure, in Pt. - 1, LANE 1 is currently open with green signal and
LANE 4 is ready with an yellow signal but LANE 2 and LANE 3 are blocked. In
LANE 3, vehicle count is already greater than the threshold value, therefore the
road coming to LANE 2 of Pt. - 1 is blocked in the Pt. - 2 itself. Thus re-routing
them through another lanes. (Assuming that Pt. - 1 is the current intersection and
Pt. - 2 is the previous intersection.)
Chapter 4: Principles 16

FIGURE 4.2: Signal at Lane 1

In the above figure, Lane 1 is open with green signal and other lanes are closed with
red signal.

FIGURE 4.3: Signal at Lane 2

In the above figure, Lane 2 is open with green signal and other lanes are closed with
red signal.
Chapter 4: Principles 17

FIGURE 4.4: Signal at Lane 3

In the above figure, Lane 3 is open with green signal and other lanes are closed with
red signal and after that Lane 4 will get the green signal automatically.
Chapter 4: Principles 18

4.4 Diagrams

4.4.1 Flowchart

FIGURE 4.5: Flowchart.

Chapter 4: Principles 19

4.4.2 Sequence Diagram

FIGURE 4.6: Sequence Diagram.

Chapter 4: Principles 20

4.4.3 Use Case Diagram

FIGURE 4.7: Use Case Diagram.

4.5 Algorithms

4.5.1 Vehicle Counter Algorithm

Assuming the objects detected by the IR Sensors to be vehicles,

int counter = 0;
int hitObject = false;
int val ;
Step 1: Read value from sensor (val). Sensor gives output 0 if car is detected and
1 if no car is detected.
Chapter 4: Principles 21

Step 2: If val == 0 hitObject = false then increment the counter and set hitObject
= true.
else if val == 1 hitObject = true
then set hitObject = false.
Step 3: Go to step 1

4.5.2 Traffic Control Algorithm

No. of sensors = 8 and are denoted by S1, S2, S3, S4, S5, S6, S7, S8
No. of cars in Lane 1 (N1) = S1 – S2
No. of cars in Lane 2 (N2) = S3 – S4
No. of cars in Lane 3 (N3) = S5 – S6
No. of cars in Lane 4 (N4) = S7 – S8
Li = (L1, L2, L3, L4), Ni = (N1, N2, N3, N4), Ti = (T1, T2, T3, T4)
Step 1: Start
Step 2: Sensors will read the no. of vehicles on each lane (i.e. L1, L2, L3, L4)
Step 3: if (Vehicle Count < Threshold)
Then status = Normal traffic. Turn on the green signal for all the lanes one after
another in a sequential manner (L1-L2-L3-L4). When signal is green for one lane,the
others will remain red.
Step 4: else status = congestion.
Step 5: COMPARE (N1, N2 , N3, N4), Select the highest of the four (say Ni),turn
on green signal for that lane (say Li) for time (Ti). When time Ti ends, turn on the
red signal.
Step 6: COMPARE (N2, N3, N4), Select the highest of the three (say Ni), turn on
green signal for that lane (say Li) for time (Ti). When time Ti ends, turn on the
red signal.
Step 7: COMPARE (N3, N4), Select the highest of the two (say Ni), turn on green
signal for that lane (say Li) for time (Ti). When time Ti ends, turn on the red
signal.
Step 8: The last remaining lane automatically gets selected and it is given the green
signal for time Ti.
Step 9: Jump to Step 3.
Chapter 5

RESULTS AND ANALYSIS

5.1 Results and Analysis

The proposed system helps in better time based monitoring and thus has certain
advantages over the existing system like minimizing number of accidents, reducing
fuel cost and is remotely controllable etc.

The proposed system is designed in such a way that it will be able to control the
traffic congestion as well as track the number of vehicles. The administrator of the
system can access local server in order to maintain the system.

22
Chapter 5: Results and Analysis 23

FIGURE 5.1: Model of the Project.

5.2 Challenges

1. Limited Budget: As graduate students our ability to test different technolo-

gies for accurate results are very limited.

2. Service to emergency vehicles: No method implemented for providing pas-

sage to emergency vehicles such as ambulances.

3. Lack of Time: Due to lack of time only one method using sensors have been
implemented.
Chapter 6

MISCELLANEOUS

6.1 Future Scope

For future directions, different priority levels for multiple incidents and scenarios
can be considered. The main issue with IoT is that the security of the entire sys-
tem have to be concentrated on and not a particular IoT layer, device or software.
Hence, integrating the entire traffic management system with multiple layer secu-
rity for various data generated from various sources can be another subject of future
scope. Along with that an emergency signal for an emergency vehicle (such as an
Ambulance) can also be included in order to serve them better.

6.2 Related Works

In the field of IoT, many systems are proposed in order to control, manage the
traffic system effectively. Each of the systems use different types of technologies,
components for managing Traffic congestion like IR Sensors, RFID’s, Zigbee, Traffic
warning systems, Big Data, Bluetooth etc. The following are some the works that
are related to our project. In the past ten years, the Internet of Things evolution has
been unprecedented. Recently, various driver assistance systems have been actively
developed that use both information communication technology and on-board sen-
sors. Invisibility of traffic signal caused by huge vehicles blocking the view, prevent
24
Chapter 6: Miscellaneous 25

traffic congestion at toll gates and give advanced collision warning to the drivers. A
microcontroller with a RF module will be installed and is programmed to connect
to each automobile passing by. Later it displays signal status on the traffic signal
status display system installed inside the automobile. This system installed in the
vehicle is also capable of giving collision warnings to the driver.

IoT links the objects of the real world to the virtual world. It constitutes to a world
where physical objects and living beings, as well as virtual data and environments,
interact with each other. Urban IoT system that is used to build intelligent trans-
portation system (ITS) has been developed. IoT based intelligent transportation
systems are designed to support the Smart City vision, which aims at employing the
advanced and powerful communication technologies for the administration of the
city and the citizens. ITS uses technologies like near field communication (NFC)
and wireless sensor network (WSN).

Automation combined with the increasing market penetration of on-line commu-

nication, navigation, and advanced driver assistance systems will ultimately result
in intelligent vehicle highway systems (IVHS) that distribute intelligence between
roadside infrastructure and vehicles and in particular on the longer term, are one of
the most promising solutions to the traffic congestion problem. The simulation and
evaluation of a traffic congestion detection system which combines inter-vehicular
communications, fixed roadside infrastructure and infrastructure-to-infrastructure
connectivity and big data. To simulate and evaluate, a big data cluster was devel-
oped based on Cassandra. Big data cluster is coupled with discreet event network
simulator with the SUMO (Simulation of Urban Mobility) traffic simulator and the
Veins vehicular network framework. The results validate the efficiency of the traffic
detection system and its positive impact in detecting, reporting and rerouting traffic
when traffic events occur. In order to avoid incidents like jams, accidents and to
reduce huge menace concepts like Zigbee, RFID, Bluetooth, GSM-GPS technologies
were developed.(Yucheng Huang, 2018)
Conclusion

Smart Traffic Management System has been developed by using multiple features of
hardware components in IoT. Traffic optimization is achieved using IoT platform for
efficient utilizing allocating varying time to all traffic signal according to available
vehicles count in road path. Smart Traffic Management System is implemented to
deal efficiently with problem of congestion and perform re-routing at intersections
on a road.

This research presents an effective solution for rapid growth of traffic flow partic-
ularly in big cities which is increasing day by day and traditional systems have
some limitations as they fail to manage current traffic effectively. Keeping in view
the state of the art approach for traffic management systems, a smart traffic man-
agement system is proposed to control road traffic situations more efficiently and
effectively. It changes the signal timing intelligently according to traffic density on
the particular roadside and regulates traffic flow by communicating with local server
more effectively than ever before. The decentralized approach makes it optimized
and effective as the system works even if a local server or centralized server has
crashed. The system also provides useful information to higher authorities that can
be used in road planning which helps in optimal usage of resources. (Sabeen Javaid,
2018)

26
Bibliography

Babu, P. R. K. S. M. R. (2016). Real-time smart traffic management system for smart

cities by using internet of things and big data. 2016 International Conference on
Emerging Technological Trends (ICETT).

Chandana K K, Dr. S. Meenakshi Sundaram, C. D. M. N. S. N. K. (2013). A smart

traffic management system for congestion control and warnings using internet of
things (iot). Saudi Journal of Engineering and Technology, 2.

Dave, P. N. D. M. . P. S. P. (2018). Smart traffic management system using iot.

International Journal of Computer Engineering and Applications, 12.

Sabeen Javaid, Ali Sufian, S. P. M. T. (2018). Smart traffic management system us-
ing internet of things. 20th International Conference on Advanced Communication
Technology (ICACT).

Viswanathan, V. and Santhanam, V. (2013). Traffic signal control using wireless

sensor networks. 2nd International Conference on Advances in Electrical and
Electronics Engineering (ICAEE’2013).

Yucheng Huang, Linbing Wang, Y. H. W. Z. Y. Z. (2018). A prototype iot based

wireless sensor network for traffic information monitoring. volume 11.

Zantout, S. (2017). Traffic light controller project final report.

27