Scribd
Upload
4 views5 pages

Cad Final Renewable

The document is a final exam for a CAD course at the Higher Technological Institute, covering various topics related to part drawing, simulation processes, and assembly of parts. It includes multiple questions with true/false statements and requires students to demonstrate their understanding of CAD features and processes. The exam is scheduled for January 10, 2022, and consists of four main questions with a total of 60 marks.

Uploaded by

falcongaming026
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views5 pages

Cad Final Renewable

The document is a final exam for a CAD course at the Higher Technological Institute, covering various topics related to part drawing, simulation processes, and assembly of parts. It includes multiple questions with true/false statements and requires students to demonstrate their understanding of CAD features and processes. The exam is scheduled for January 10, 2022, and consists of four main questions with a total of 60 marks.

Uploaded by

falcongaming026
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Final Exam - First Semester 2021-2022

Course Name: CAD HIGHER TECHNOLOGICAL INSITUTE – Level: First Year


BENI SUEF
Course Code: Department: Renewable Energy

Marks: 60 Degree Date: 10th January 2022

Time: 3 hrs. Number of Pages: 5 Day: Monday Dr: Essam Khalaf Saied

Question1: (14 marks)

The next illustration depicts a part drawing and projections. Answer the next
questions.

Put (✓) true or (×) false in brackets with the true answer if false:
a) The given part must be drawn using only one feature ( )

b) The given part must be drawn using only two sketches ( )

c) The part with length 390 mm can be drawn with the feature revolve only ( )

d) This part cannot be drawn without the feature thread ( )

e) The (R15) dimension refers to a chamfer with radius 15. ( )

f) The hole with φ85 must be drawn with feature revolve ( )

g) This drawing cannot be drawn without new plan ( )


Question2: (6marks)

Answer the next questions according to the next part drawing.


a. The given part must be drawn using only three features ( )
b. The given part must be drawn using only three sketches ( )
c. The part with diameter φ 10 and φ 20 can only be drawn with the feature revolve ( )
d. This part cannot be drawn without the feature extrude cut ( )
e. The (R10) dimension refers only to a Fillet with radius 10. ( )
f. This drawing cannot be drawn without new plan ( )

Question3: (10 marks)

Answer the following questions for the simulation process.


a. The first step of the static simulation process is ………..
b. To complete a static simulation process, you need to:
I. …………….
II. ……………..
III. ……………..
IV. …………….
V. ………………
c. You can edit the part dimensions after the simulation results if the result is not accepted.
True or false.
d. The mesh refinement does not affect the computer speed of simulation. True or false with
explaining.
e. The load at the static simulation must be applied on the whole part. True or false.

Question4: (30 marks)

The given drawing is an assembly for three different parts. Answer next
questions according to the given drawing.

Put (✓) true or (×) false in brackets:

a) The given assembly must be drawn as three parts at first then assemble it together. ( )

b) Part no. 3 needs two features to be drawn ( )

c) Part no. 2 needs two features to be drawn ( )

d) Part no. 1 needs three features to be drawn ( )


e) Regarding the given dimensions there is no interference between part 2 and 3. ( )

f) There is no need to use the revolve feature in part 3 ( )

g) There is no need to use the revolve feature in part 2 ( )

h) There is no need to use the revolve feature in part 1 ( )

i) The extrude cut feature must be used in part 3 ( )

j) The extrude cut feature must be used in part 2 ( )

k) The extrude cut feature must be used in part 1 ( )

l) We cannot complete the drawing without new plan ( )

m) We cannot complete the drawing without the feature swept ( )

n) We cannot complete the drawing without the feature loft ( )

o) We cannot complete the drawing without the feature shell ( )

p) We can know the mass of the assembly from the menu markup ( )

Answer the following

q) In the given drawing, if there is no interference between parts write zero, if there is
interference write the length of the interfered part section and the parts no.

r) In part no. 3, how many dimensions you must identify to complete the part sketch before the
extrude feature. Write these dimensions
The next illustration depicts a typical Feature Manager design tree. Look at the icons displayed,
Identify the type of the feature, and write its name.

Dr. Essam Khalaf Saied Best Wishes

You might also like