running-config

startup-config
User Exec setup
controllers ser0
mode Router> show
interfaces arp
debug IP [mac_addr]
protocols
rip|igrp interface brief
ip
Line Editiog: copy protocols
enable log
exit reload route
Ctl-R redisplay line arp
erase start traffic
Ctl-A move to beginning of line access-list
ping
Ctl-E move to end of line process cpu
traceroute
Ctl-B move back one char cdp
Ctl-F move forward one char telnet
Privileged Exec appletalk
Ctl-D delete one char Router# clear counters
mode mac address-table
Tab finish typing a command connect
version
clock
Router Command History:
hostname
Ctl-P show last command enable password level 7 xxxx
Ctl-N show previous commands config terminal exit route 0.0.0.0
enable secret xxxx classless
show history enable use-tacacs
show terminal name-server
enable last-resort domain-name
ip dhcp-server
appletalk eigrp
Global Config logging buffered ospf
mode Router(config)# access-list xxx
boot
[no] service passwrod-encryption
banner
exit

interface vlan | Eth | line [console 0 | vty 0 4

Router(config-if)# Router(config-subif)# Router(config-line)# Router(config-router)#

network x.x.x.x
ip address [addr][mask][secondary] password xxxx
ip address passive-interface default
ip helper-address login
encapsulation isl vlanx logging synchronous
[no] passive-interface serial 0/0
no shutdown redistribute
no login (allow telnet w/o passwd)
no ip directed-broadcast no auto summary
access-class [acl-list# ] in
media-type version
appletalk zone |cablerange
encapsulation
clock rate
Cisco Router Modes and
cisco-router-commands.vsd
bandwidth Commands 4-30-13
description [email protected]
ip access-group xxx [in | out]
ip summary address