Scribd
Upload
149 views2 pages

IonPure DC Controller

Ionpure® DC Power Controllers are designed for use with Continuous Electrodeionization Modules, offering individual power control and reduced system costs. They are available in various models with specific voltage and amperage outputs, and are UL recognized with CE versions available. The controllers require specific electrical inputs and should be installed indoors under certain environmental conditions.

Uploaded by

Igor Egorov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
149 views2 pages

IonPure DC Controller

Ionpure® DC Power Controllers are designed for use with Continuous Electrodeionization Modules, offering individual power control and reduced system costs. They are available in various models with specific voltage and amperage outputs, and are UL recognized with CE versions available. The controllers require specific electrical inputs and should be installed indoors under certain environmental conditions.

Uploaded by

Igor Egorov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ionpure® DC Power Controllers

DC Power Controllers for use with


Continuous Electrodeionization Modules

The DC Power Controllers are designed to be


used with the IONPURE® modules and are part of
a complete line of modular system components
offered to system integrators.

DC Power Controllers Features


n Designed for individual power control for each Three Phase Power Controller
module IP-600-20-VPCB
n Pre-engineered boards reduce system cost
n Compatible with DSP Display Boards
n Use DC Power Controllers in lieu of rectifiers for
enhanced system control
n Reduced spares cost equals less downtime

For additional information on our Power


Controllers call 866-876-3340 or visit our web
site at www.ionpure.com. Information on CEDI
modules and our complete line of system
components is also available.
Single Phase Power Controller
IP-200 / 400 / 600 VPCB
Ionpure® DC Power Controllers

Operating Environment
DESIGN SPECIFICATIONS
Installation should be indoors with no direct
sunlight and it should have a maximum ambient Item Number Description Volts Amperage Output
temperature of 122°F (50°C) up to 90% relative
humidity non-condensing IP-200VPCB DC Power Controller 200VDC 2.5, 4, 6.5, 10

Quality Assurance Standards IP-400VPCB DC Power Controller 400VDC 2.5, 4, 6.5, 10


UL recognized. CE versions are available.* Each
board is factory tested to meet strict Ionpure and IP-600VPCB DC Power Controller 600VDC 2.5, 4, 6.5, 10
industry standards.
IP-600-20-VPCB DC Power Controller 600VDC 13.2, 20
*Refer to operating manual for details

PHYSICAL SPECIFICATIONS

Item Number Height Width Depth Weight


IP-200VPCB 6.00” (152.4 mm) 6.00” (152.4 mm) 2.25” (57.2 mm) 1.6 lbs (0.72kg)

IP-400VPCB 6.00” (152.4 mm) 6.00” (152.4 mm) 2.25” (57.2 mm) 1.6 lbs (0.72kg)

IP-600VPCB 6.00” (152.4 mm) 6.00” (152.4 mm) 2.25” (57.2 mm) 1.6 lbs (0.72kg)

IP-600-20-VPCB 5.10” (129.5 mm) 5.10” (129.5 mm) 6.25” (158.7 mm) 10 lbs (4.5kg)

Rear View
ELECTRICAL REQUIREMENTS

Item Number Input Voltage

IP-200VPCB 115, 176, or 230 VAC 1Φ

IP-400VPCB 220, 330, or 440 VAC 1Φ


DC Power
IP-600VPCB 440, 550, or 660 VAC 1Φ Display Board
Controller
(Sold Separately)
IP-600-20-VPCB 468 VAC 3Φ

Note: Isolation transformer required. More detail in Operating Manual


Patch Cable IP-LXCABLE06
(Sold seperately, additional lengths available.)

Siemens © 2010 Siemens Water Technologies Corp. Ionpure is a trademark of Siemens its subsidiaries or affiliates.
HPS-C-VPCB.S-DS-0410
10 Technology Drive The information provided in this brochure contains merely general
Subject to change without prior notice.
Lowell, MA 01851 descriptions or characteristics of performance which in actual case
Phone: 866.876.3340 of use do not always apply as described or which may change as a
result of further development of the products. An obligation to
provide the respective characteristics shall only exist if expressly
agreed in the terms of contract.

www.siemens.com/ionpure

You might also like