AC750 WiFi Range Extender

Model E X6100v2
User Manual

July 2018
202-11635-02

350 East Plumeria Drive

San Jose, CA 95134
USA
 AC750 WiFi Range Extender

Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help,
access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR
support resources.

Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.

Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.

Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.

2
 AC750 WiFi Range Extender

Contents

Chapter 1 Get to Know Your Extender

Front Panel and Side Panel LEDs and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
When to Use Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2 Get Started

Use the Extender in Extender Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Place the Extender and Apply Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect to an Existing WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Use the Extender in Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Access Extender Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Run Smart Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 3 Extender Network Settings

View Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Boost Your Video Streaming With FastLane Technology . . . . . . . . . . . . . . . . . . . 19
Adjust the WiFi Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
View WiFi Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Change the WiFi Network Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turn Off the SSID Broadcast to Create a Hidden Network . . . . . . . . . . . . . . . . . 23
Disable or Enable the WiFi Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Change the WiFi Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Use WPS to Add a Computer to the Extender’s WiFi Network . . . . . . . . . . . . . . 26
Use WPS With the Push Button Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Use WPS With the PIN Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Deny Access to a WiFi-Enabled or Mobile Device . . . . . . . . . . . . . . . . . . . . . . . . 29
Set Up an Access Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Change the Extender’s Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Set Up the Extender to Use a Static IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Use the Extender With MAC Filtering or Access Control. . . . . . . . . . . . . . . . . . . 32

Chapter 4 Monitor and Maintain the Extender

Change the Extender User Name and Password. . . . . . . . . . . . . . . . . . . . . . . . . . 35
Turn Password Protection Off and On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Recover a Forgotten User Name or Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Automatically Adjust for Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Manually Set the Extender Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Back Up and Manage the Extender Configuration . . . . . . . . . . . . . . . . . . . . . . . . 38
Back Up the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Restore the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Return the Extender to Its Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Use the Factory Reset Button to Restore Factory Settings . . . . . . . . . . . . . . 40

3
 AC750 WiFi Range Extender

Erase the Settings and Return to Factory Settings . . . . . . . . . . . . . . . . . . . . . 40

Update the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Restart the Extender Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Chapter 5 FAQs and Troubleshooting

FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cannot Connect to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cannot Join a WiFi Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Appendix A Supplemental Information

Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

4
1. Get to Know Your Extender
1
The AC750 WiFi Range Extender boosts your existing network range and speed, delivering
dual-band WiFi. You can also use the extender in access point mode as a WiFi access point and
create a new WiFi hotspot by using a wired Ethernet connection.
This chapter covers the following topics:
• Front Panel and Side Panel LEDs and Buttons
• When to Use Your Extender
• Support for the 802.11ac Networking Standard

Note: For more information about the topics covered in this manual, visit the
support website at netgear.com/support.

Note: Firmware updates with new features and bug fixes are made
available from time to time on downloadcenter.netgear.com. Some
products can regularly check the site and download new firmware, or
you can check for and download new firmware manually. If the
features or behavior of your product does not match what is
described in this guide, you might need to update your firmware.

5
 AC750 WiFi Range Extender

Front Panel and Side Panel LEDs and Buttons

The LEDs are located on the front panel. A switch, buttons, and an Ethernet port are located
on the side panel.

Router Link LED

Router Arrow LED
Client Arrow LED
Access Point/Extender switch
Client Link LED
Power LED Power On/Off button
WPS LED WPS button
Factory Reset button
Ethernet port

Figure 1. Extender front panel and side panel

Table 1. LEDs

LED Description

Router Link LED This LED indicates the connection between the extender and the router
or access point.
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.

Client Link LED This LED indicates the connection between the extender and a
computer or mobile device.
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.

Get to Know Your Extender

6
 AC750 WiFi Range Extender

Table 1. LEDs (continued)

LED Description

Power LED • Solid amber. The extender is booting.

• Solid green. The extender is powered on.
• Off. The extender is powered off.

WPS LED • Solid green. WiFi security is enabled (WPA or WPA2).

• Blinking green. The extender is making a WPS connection.
• Off. WiFi security is not enabled.

Arrow LEDs help you place the extender. These LEDs work as follows:
• No arrow LEDs are lit. The extender is in a good location.
• Client Arrow LED blinks. Move the WiFi-enabled computer or mobile device
closer to the extender.
• Router Arrow LED blinks. Move the extender closer to the router.

When to Use Your Extender

We recommend that you connect to the extender only when your WiFi network connection is
poor. Data traffic routed through the extender is inherently slower than traffic routed directly
from the network.

How the Extender Works

The extender works like a bridge between a WiFi router (or a WiFi access point) and a
WiFi-enabled device that is outside the range of the WiFi router. The extender performs two
main jobs:
• The extender connects to a working WiFi network.
When the extender connects over WiFi to an existing network, it functions as a network
client, similar to how a WiFi-enabled device connects to a network.
• The extender acts as an access point for WiFi-enabled devices.
The extender broadcasts its own WiFi network that WiFi-enabled devices can join. In its
role as an access point, the extender performs tasks that WiFi routers do, such as
broadcasting its network name (SSID).

Get to Know Your Extender

7
 AC750 WiFi Range Extender

The extender must do each of these jobs so that both ends of the bridge are in place.

WiFi range extender

Boosts the range of Existing WiFi
your existing WiFi and Sometimes your
creates a stronger router does not
signal in hard-to-reach provide the WiFi
areas. coverage that you
need.

Figure 2. Range extender in a home

Support for the 802.11ac Networking Standard

The extender supports the 802.11ac networking standard. This new standard offers better
speed, improved reliability, and more range than older WiFi networking standards. The
extender is backward compatible with earlier WiFi standards. However, to get the benefits of
802.11ac, your WiFi router must support the 802.11ac WiFi networking standard.
To learn more about the 802.11ac WiFi networking standard, visit
netgear.com/landing/80211ac/.

Figure 3. Speed comparison between the 802.11n and 802.11ac standards

Get to Know Your Extender

8
2. Get Started
2
This chapter covers the following topics:
• Use the Extender in Extender Mode
• Use the Extender in Access Point Mode
• Access Extender Settings
• Run Smart Setup

9
 AC750 WiFi Range Extender

Use the Extender in Extender Mode

In extender mode, the extender repeats signals from an existing WiFi router or access point.
Set the Access Point/Extender switch, place the extender, apply power, and connect it to
your WiFi network.

Note: You can also use the extender as a WiFi access point and create a
new WiFi hotspot by using a wired Ethernet connection. See Use the
Extender in Access Point Mode on page 15.

Place the Extender and Apply Power

 To place the extender and apply power:

1. Set the Access Point/Extender switch to Extender .

2. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
3. Plug the extender into an electrical outlet.
Wait for the Power LED to light green. This might take up to 100 seconds. If the
Power LED does not light, press the Power On/Off button on side of the extender.

Connect to an Existing WiFi Network

To extend the range of your WiFi network, you must connect the extender to your existing
WiFi network. You can do this in one of two ways:
• Connect with WPS. For more information, see Connect With WPS on page 10.
• Connect with the NETGEAR installation assistant. For more information, see Connect
With the NETGEAR Installation Assistant on page 12.

Connect With WPS

Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network
name and password.

Note: WPS does not support WEP network security. If you are using WEP
security, follow the instructions in Connect With the NETGEAR
Installation Assistant on page 12.

Get Started
10
 AC750 WiFi Range Extender

 To use WPS to connect the extender to your WiFi router:

1. Press the WPS button on the extender.
The WPS LED blinks.
2. Within two minutes, press the WPS button on your router or access point.
The WPS LED on the extender lights solid green, the Router Link LED lights, and
the extender connects to your existing WiFi network.
If the Router Link LED does not light, try again. If it still does not light, see Connect With
the NETGEAR Installation Assistant on page 12.
3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender
to the 5 GHz band.
4. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.

DO DON’T

5. Plug the extender into an electrical outlet and wait for the Power LED to light green.
6. Use the Router Link LED to help you choose a spot where the extender-to-router
connection is optimal.
7. If the Router Link LED does not light amber or green, plug the extender into an outlet closer
to the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED lights
amber or green.
8. On your WiFi-enabled computer or mobile device, find and connect to the new extender
WiFi network.
The extender creates two new extender WiFi networks. The extender’s new WiFi network
names are based on your existing WiFi network name, with _2GEXT and _5GEXT at the
ends of the names.
For example:
• Existing WiFi network name. MyNetworkName
• New extender network names. MyNetworkName_2GEXT and
MyNetworkName_5GEXT
Use the same WiFi password that you use for your WiFi router.

Get Started
11
 AC750 WiFi Range Extender

9. Test the extender WiFi range by moving your WiFi-enabled computer or mobile device to the
area with a poor router WiFi signal:
a. Leave your WiFi-enabled computer or mobile device in the area with a poor router
WiFi signal and return to the extender.
b. Check the Client Link LED on the extender:
• If the Client Link LED is solid green or amber, your extender WiFi network reaches
the area with a poor router WiFi signal and your network setup is complete.
• If the Client Link LED is red, your extender WiFi network does not reach the area
with a poor router WiFi signal.
You must move the WiFi-enabled computer or mobile device closer to the
extender until the Client Link LED turns solid green or amber.

Connect With the NETGEAR Installation Assistant

 To connect with the NETGEAR installation assistant:
1. Use a WiFi network manager on a WiFi-enabled computer or mobile device to find and
connect to the extender WiFi network EX6100_NETGEAR_2EXT.
After the connection with the WiFi-enabled computer or mobile device is established, the
Client Link LED lights.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
The New Extender Setup page displays.
4. Click the NEW EXTENDER SETUP button.

5. Complete the fields on the page and click the NEXT button.
6. Verify that the Access Point/Extender switch is set to Extender and click the
CONTINUE button.
7. Select a WiFi network to extend and click the NEXT button.

Get Started
12
 AC750 WiFi Range Extender

If you do not want to extend both WiFi bands, clear the 2.4 GHz WiFi Networks or the
5 GHz WiFi Networks check box.
8. In the Password (Network Key) field, type the existing WiFi network password (also called
passphrase or security key) and click the NEXT button.
9. Set the network name (SSID) and password for your new extender WiFi network and click
the NEXT button.

Note: We recommend that you use a network name (SSID) for your extender
that is different from the SSID that your router uses.

Wait for the page to display a list of available extender WiFi networks, which might take
up to one minute.
10. Connect the WiFi-enabled computer or mobile device to the new extender WiFi network
using the extender SSID and password that you created in Step 9.
11. Make sure that your WiFi-enabled computer or mobile device is connected before you click
the CONTINUE button.
12. Click the CONTIINUE button.
A message displays confirming that the extender is connected to the new extender WiFi
network.
13. Click the NEXT button.
The registration page displays.
14. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
15. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.

DO DON’T

16. Plug the extender into an electrical outlet and wait for the Power LED to light green.
17. Use the Router Link LED to help you choose a spot where the extender-to-router
connection is optimal.

Get Started
13
 AC750 WiFi Range Extender

18. If the Router Link LED doesn’t light amber or green, plug the extender into an outlet closer
to the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED lights
amber or green.
19. Reconnect your WiFi-enabled computer or mobile device to the new extender WiFi network.
20. Test the extender WiFi range by moving your WiFi-enabled computer or mobile device to the
area with a poor router WiFi signal:
a. Leave your WiFi-enabled computer or mobile device in the area with a poor router
WiFi signal and return to the extender.
b. Check the Client Link LED on the extender:
• If the Client Link LED is solid green or amber, your extender WiFi network reaches
the area with a poor router WiFi signal and your network setup is complete.
• If the Client Link LED is red, your extender WiFi network does not reach the area
with a poor router WiFi signal.
You must move the WiFi-enabled computer or mobile device closer to the
extender until the Client Link LED turns solid green or amber.

Connect an Ethernet-Enabled Device

After the extender is connected to your existing WiFi network, you can connect a device to
the extender using an Ethernet cable. That device can then access your existing network
through the WiFi connection.

WiFi router Extender

Blu-ray player

Figure 4. Ethernet connection to the extender

Get Started
14
 AC750 WiFi Range Extender

Use the Extender in Access Point Mode

You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using
a wired Ethernet connection.

 To install the extender as an access point:

1. Set the Access Point/Extender switch to Access Point.
2. Plug the extender into an electrical outlet and wait for the Power LED to light green.
If the Power LED does not light, press the Power On/Off button.
3. Use an Ethernet cable to connect the Ethernet port on the extender to an Ethernet LAN port
on a router or a remote Ethernet LAN jack with LAN access.
Extender Router

The extender joins the LAN and creates a WiFi hotspot.

4. On your WiFi-enabled computer or mobile device, open the WiFi connection manager and
locate and connect to one of the following WiFi extender networks:
• 2.4 GHz network. NETGEAR_EXT
• 5 GHz network. NETGEAR_5GEXT WiFi network.
When you join the network, the extender Client Link LED lights to show that you are
connected.
5. Launch a web browser and enter www.mywifiext.net in the address field.
The New Extender Setup page displays.
6. Click the NEW EXTENDER SETUP button.
The Create Account page displays.
7. Complete the fields on the page and click the NEXT button.
8. When prompted, set the network name (SSID), security option, and password for each
access point network and click the NEXT button.
Your settings are applied and the extender is ready to be used as an access point.
9. Connect your WiFi-enabled computer or mobile device to the new access point WiFi
network using the SSID and password that you created in Step 8.
10. Click the CONTINUE button.

Get Started
15
 AC750 WiFi Range Extender

A page displays that says you successfully created an access point.

11. Click the NEXT button.
The registration page displays.
12. Follow the onscreen instructions to register your extender.

Access Extender Settings

After installation, you can log in to the extender to view or change the extender’s settings.

 To log in to the extender:

1. Use a WiFi network manager on a WiFi-enabled computer or mobile device to find and
connect to the new extender WiFi network.
After the connection with the WiFi-enabled computer or mobile device is established, the
Client Link LED lights.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password and click the LOG IN button.
The Status page displays.

Run Smart Setup

You can use Smart Setup to change the extender settings. This is an easy way to connect the
extender to a different router or to change the extender WiFi network name (SSID) or WiFi
password.

 To run Smart Setup:

1. Use a WiFi network manager on a WiFi-enabled computer or mobile device to find and
connect to the new extender WiFi network.
After the connection with the WiFi-enabled computer or mobile device is established, the
Device Link LED lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password and click the LOG IN button.
The Status page displays.
5. Click the SMART SETUP button.

Get Started
16
 AC750 WiFi Range Extender

The Welcome page displays.

6. Click the WIFI RANGE EXTENDER button.
The extender scans for WiFi signals and finds the WiFi networks in your area and
displays a list.
7. Select your WiFi network and click the NEXT button.
8. When prompted, enter the password to connect to your WiFi network and click the NEXT
button.
A message displays when the extender connects to your existing router’s WiFi network.
9. Click the NEXT button.
The extender applies your settings to its WiFi network names and WiFi passwords.
During this change, the extender disconnects you from its WiFi network.
10. When prompted, connect your WiFi-enabled computer or mobile device to the extender
WiFi network and click the CONTINUE button.
The registration page displays.
11. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.

Get Started
17
3. Extender Network Settings
3
This chapter covers the following topics:
• View Connected Devices
• Boost Your Video Streaming With FastLane Technology
• Adjust the WiFi Coverage
• View WiFi Settings
• Change the WiFi Network Name
• Turn Off the SSID Broadcast to Create a Hidden Network
• Disable or Enable the WiFi Radios
• Change the WiFi Speed
• Use WPS to Add a Computer to the Extender’s WiFi Network
• Deny Access to a WiFi-Enabled or Mobile Device
• Set Up an Access Schedule
• Change the Extender’s Device Name
• Set Up the Extender to Use a Static IP Address
• Use the Extender With MAC Filtering or Access Control

18
 AC750 WiFi Range Extender

View Connected Devices

You can view a list of devices that are connected to the extender network.

 To view connected devices:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Connected Devices.

Boost Your Video Streaming With FastLane Technology

Get the most out of your HD entertainment with FastLane technology. With FastLane
technology, the extender connects to your router using one band and connects to your
devices using another band. Because a band is dedicated to each function, performance is
enhanced.
If all your devices and your WiFi router support only the 2.4 GHz band, or all your devices
and your WiFi router support only the 5 GHz band, do not enable FastLane Technology.

Extender Network Settings

19
 AC750 WiFi Range Extender

When you enable FastLane Technology, two options are available:

• Use the 2.4 GHz band to connect to the extender from WiFi-enabled devices and use the
5 GHz band to connect the extender to the WiFi router. Use this mode if your WiFi router
supports the 5 GHz band but the devices that you want to use for gaming and streaming
support the 2.4 GHz band.
• Use the 5 GHz band to connect to the extender from WiFi-enabled devices and use the
2.4 GHz band to connect the extender to the WiFi router. Use this mode if the devices
that you want to use for gaming and streaming support the 5 GHz band but your WiFi
router supports the 2.4 GHz band.

 To activate FastLane mode:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > FastLane.
The FastLane Technology page displays.
6. Select the FastLane Technology radio button.

The page adjusts and displays two more radio buttons.

7. Select a radio button:

Extender Network Settings

20
 AC750 WiFi Range Extender

• Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5 GHz only

• Router to Extender in 5 GHz only and Extender-to-Device in 2.4 GHz only
8. Click the Save button.
Your settings are saved.

Adjust the WiFi Coverage

You can set the extender’s WiFi coverage depending on how large you want your coverage
area to be.

 To adjust the WiFi coverage:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > WiFi Coverage.

6. Select a Wireless Output Power radio button.

If your extender is covering a small area, select a lower-output power percentage. If your
extender is covering a large area, select a higher-output power percentage.
7. Click the SAVE button.
Your settings are saved.

Extender Network Settings

21
 AC750 WiFi Range Extender

View WiFi Settings

 To view the WiFi settings:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Wireless.

Change the WiFi Network Name

 To change the WiFi network name:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.

Extender Network Settings

22
 AC750 WiFi Range Extender

5. Select Settings > Wireless.

6. In each Network Name (SSID) field, type a network name.

7. Click the SAVE button.
Your settings are saved.

Turn Off the SSID Broadcast to Create a Hidden Network

By default, the extender broadcasts its WiFi signal so that its WiFi network names (SSIDs)
are easy for you to find and connect to from your computer, tablet, or smartphone. You can
turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden network
you must know its SSID and password and manually enter them.

 To turn off the SSID broadcast to create a hidden network:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Wireless.
The Wireless page displays.

Extender Network Settings

23
 AC750 WiFi Range Extender

6. Clear the Broadcast the Network name (SSID) check box.

7. Click the SAVE button.

Your settings are saved.

Disable or Enable the WiFi Radios

By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If
you disable the WiFi radios, then no one can connect with WiFi to the extender.

 To enable or disable the WiFi radios:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.

Extender Network Settings

24
 AC750 WiFi Range Extender

5. Select Settings > Wireless.

6. Select or clear the Enable 2.4 GHz WiFi check box.

7. Select or clear the Enable 5 GHz WiFi check box.
8. Click the SAVE button.
Your settings are saved.

Change the WiFi Speed

When you use the extender in FastLane mode or in access point mode, you can change the
WiFi speed setting.

Note: When the extender connects to a router in extender mode, the

extender channel and speed follow the router settings. The WiFi speed
settings are grayed out on the Wireless page and cannot be selected.

 To change the WiFi speed:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.

Extender Network Settings

25
 AC750 WiFi Range Extender

5. Select Settings > Wireless.

6. In each WiFi Speed menu, select a speed.

7. Click the SAVE button.
Your settings are saved.

Use WPS to Add a Computer to the Extender’s WiFi

Network
WPS (Wi-Fi Protected Setup) lets you connect a WiFi-enabled computer or mobile device to
the extender’s network without entering the WiFi network passphrase or key. Instead, you
use a WPS button or enter a PIN to connect.
If you use the push button method, the WiFi-enabled computer or and mobile device that you
are trying to connect must include a physical button or a software button. If you use the PIN
method, you must know the PIN of the WiFi-enabled computer or mobile device that you are
trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the
extender network and generates a random passphrase. You can view this passphrase on the
Wireless page (for more information, see View WiFi Settings on page 22).
For information about using WPS to connect the extender to a WiFi network during setup,
see Use the Extender in Access Point Mode on page 15.

Extender Network Settings

26
 AC750 WiFi Range Extender

Use WPS With the Push Button Method

For you to use the push button method to connect a WiFi-enabled computer or mobile device
to the extender WiFi network, the computer or device must include a physical WPS button or
an onscreen WPS button that you can click.

 To use WPS to add a WiFi-enabled computer or mobile device to the extender’s WiFi
network:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > Connect Devices (WPS).

6. Leave the Push Button (recommended) radio button selected.

7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the WiFi-enabled computer or mobile
device to its WiFi network.
8. Within two minutes, go to the WiFi-enabled computer or mobile device and press or click
its WPS button.
9. To verify that the WiFi-enabled computer or mobile device is connected to the extender
WiFi network, select Settings > Connected Devices.
The WiFi-enabled computer or mobile device displays on the page.

Extender Network Settings

27
 AC750 WiFi Range Extender

Use WPS With the PIN Method

To use the PIN method to connect a WiFi-enabled computer or mobile device to the extender
WiFi network, you must know the PIN of the computer or device.

 To add a WiFi-enabled computer or mobile device to the extender’s WiFi network:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.

7. Type the PIN of the WiFi-enabled computer or mobile device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the WiFi-enabled computer or mobile
device.
9. Within four minutes, go to the WiFi-enabled computer or mobile device and use its WPS
software to join the WiFi network.
10. To verify that the WiFi-enabled computer or mobile device is connected to the extender
WiFi network, select Settings > Connected Devices.
The WiFi-enabled computer or mobile device displays on the page.

Extender Network Settings

28
 AC750 WiFi Range Extender

Deny Access to a WiFi-Enabled or Mobile Device

By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific WiFi-enabled computers and mobile devices based
on their MAC addresses. Each network device is assigned a MAC address, which is a unique
12-character physical address, containing the hexadecimal characters 0–9, a–f, or A–F only,
and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is
on the label of the WiFi-enabled computer or mobile device. If you cannot access the label,
you can display the MAC address using the network configuration utilities of the computer.
You might also find the MAC addresses on the Connected Devices page (see View
Connected Devices on page 19).

 To use WiFi access control to deny access:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays.
6. In the WiFi Devices section, select the Enable Access Control check box.

The WiFi Devices table displays the names and MAC addresses of WiFi-enabled
computers and mobile devices that are connected to the extender.
7. Select the Deny check box for the device.
8. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender’s WiFi network.

Extender Network Settings

29
 AC750 WiFi Range Extender

Set Up an Access Schedule

You can control access for all users during specific periods of the day. You can set up an
access schedule that prevents Internet access through the extender network based on the
times that you set.

 To set up an access schedule:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > Access Schedule.

6. Select the Access Schedule On radio button.

You can select this radio button only if access control is enabled. For information about
how to enable access control, see Deny Access to a WiFi-Enabled or Mobile Device on
page 29.
The page adjusts.
7. In the Days menu and the Time menu, select the day and time when you want to disable
Internet access.
8. Click the Add Time button.
The time you specified is added to the Scheduled Times table.
9. Click the SAVE button.
Your settings are saved.

Extender Network Settings

30
 AC750 WiFi Range Extender

Change the Extender’s Device Name

The default name is EX6100v2.

 To change the extender’s device name:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Wireless.
The Wireless page displays.
6. Scroll down and click the IP Address heading.

7. In the Device Name field, type a name.

8. Click the SAVE button.
Your settings are saved.

Set Up the Extender to Use a Static IP Address

The extender comes set up to use a dynamic IP address, which is the correct setting for most
home networks.

 To set up the extender to use a static IP address:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.

Extender Network Settings

31
 AC750 WiFi Range Extender

3. Enter www.mywifiext.net in the address field of the browser.

A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Wireless.
The Wireless page displays.
6. Click the IP Address heading.
The IP Address section displays. By default, the Get Dynamically IP Address From
Router radio button is selected.
7. Select the Use Static IP Address radio button.

8. Complete the fields to specify the IP network IP addresses.

9. Click the SAVE button.
Your settings are saved.

Use the Extender With MAC Filtering or Access Control

When a WiFi-enabled computer or mobile device connects through the extender to your
router, the MAC address of the computer or device that is shown on the router is translated to
another MAC address. If your router’s MAC filter, WiFi access control, or ACL is enabled, the
computer or device connects to the extender but cannot get an IP address from the extender
and cannot access the Internet. To allow the computer or device to receive an IP address
from the extender and access the Internet, you must provide the translated MAC address to
the router.

 To add a translated MAC address to your router:

1. Log in to your router and disable the MAC filter, WiFi access control, or ACL.
For information about how to disable your router’s MAC filter, WiFi access control, or
ACL, see your router’s documentation.

Extender Network Settings

32
 AC750 WiFi Range Extender

2. Power on the extender and connect all of your WiFi-enabled computers and mobile
devices to the extender.
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
A login page opens.
c. Enter your user name and password.
The Status page displays
5. Select Settings > Connected Devices.
The Connected Devices page displays the MAC addresses and virtual MAC addresses
for WiFi-enabled computers and mobile devices that are connected to the extender
network.
6. On the router, add the extender’s virtual MAC address and the virtual MAC addresses of all
devices that are connected to the extender network to your router’s MAC filter table.
7. Enable the router’s MAC filter, WiFi access control, or ACL.

Extender Network Settings

33
4. Monitor and Maintain the Extender
4
This chapter covers the following topics:
• Change the Extender User Name and Password
• Turn Password Protection Off and On
• Recover a Forgotten User Name or Password
• Automatically Adjust for Daylight Saving Time
• Manually Set the Extender Clock
• Back Up and Manage the Extender Configuration
• Return the Extender to Its Factory Settings
• Update the Firmware
• Restart the Extender Remotely

34
 AC750 WiFi Range Extender

Change the Extender User Name and Password

You can change the user name and password to log in to the extender.

 To add an extender user:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Password.

6. In the New User Name field, type a user name.

7. Type the password in the New Password field and the Verify Password field.
8. Select questions and enter the answers.
9. Click the SAVE button.
Your settings are saved.

Monitor and Maintain the Extender

35
 AC750 WiFi Range Extender

Turn Password Protection Off and On

We recommend that you leave password protection on to help keep your network secure.
You can turn password protection off and on.

 To turn password protection off or on:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Password.
The Password page displays.
6. Select the Password Off or Password On radio button.
7. Click the SAVE button.
Your settings are saved.

Recover a Forgotten User Name or Password

If you changed the password to access the extender and set up password recovery, you can
recover your password if you lose it.

 To recover your password to access the extender:

1. On a WiFi-enabled computer or mobile device that is connected to the extender
network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Click the Username & Password Help link.
A page displays requesting the answers to your security questions.
If you forgot the answers to your security questions, restore the extender’s factory
settings and set up your user name and password again. See Return the Extender to Its
Factory Settings on page 40 and Chapter 2, Get Started.
4. Enter the saved answers to your security questions.
5. Click the NEXT button.
Your email and password are displayed.

Monitor and Maintain the Extender

36
 AC750 WiFi Range Extender

6. Click the BACK button.

A login window opens.
7. Log in to the extender.

Automatically Adjust for Daylight Saving Time

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. Select the Automatically adjust for daylight savings time check box.
7. Click the SAVE button.
Your settings are saved.

Manually Set the Extender Clock

 To manually set the extender clock:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. In the Extender Clock section, select the Manual radio button.
7. To specify the time, complete the fields or click the Sync Clock button to synchronize the
extender time to the time on the WiFi-enabled computer or mobile device that you are using.
8. Click the SAVE button.
Your settings are saved.

Monitor and Maintain the Extender

37
 AC750 WiFi Range Extender

Back Up and Manage the Extender Configuration

When the extender works correctly after initial setup, we recommend that you back up the
extender configuration settings. After you back up the settings, if you change the extender
configuration settings but are not content with the new settings, you can restore the extender
configuration to the backed-up settings.

Back Up the Configuration Settings

You can back up the configuration file of the extender.

 To back up the extender configuration settings:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Other.

6. Click the BACKUP button.

Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_EX6100v2.cfg.
7. If your browser is not set up to save downloaded files automatically, locate where you want
to save the file.
8. Click the OK button.
The extender configuration settings are backed up.

Monitor and Maintain the Extender

38
 AC750 WiFi Range Extender

Restore the Configuration Settings

You can restore the configuration file of the extender to a previously saved configuration file.

 To restore the extender configuration settings:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Other.

6. Click the BROWSE button.

7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX6100v2.cfg.

CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.

8. Click the RESTORE button.

A confirmation pop-up window opens.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.

Monitor and Maintain the Extender

39
 AC750 WiFi Range Extender

Return the Extender to Its Factory Settings

To reset the extender to its factory settings, you can use the Factory Reset button or you can
log in and click a RESET button. For information about the factory settings, see Factory
Default Settings on page 48.

Use the Factory Reset Button to Restore Factory Settings

CAUTION:
This process erases any settings that you configured in the extender.

 To restore factory settings:

1. Insert a paper clip into the Factory Reset
hole and hold it until the Power LED blinks
amber.
2. Release the button.
All the LEDs turn off for about 3 seconds.
The Power LED lights solid amber for about
30 seconds.
The Power LED lights solid green.
The extender returns to its factory settings.
When you plug in the extender, it detects the
position of its Access Point/Extender switch.

Erase the Settings and Return to Factory Settings

CAUTION:
This process erases any settings that you configured in the extender.

 To erase the extender’s current settings:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.

Monitor and Maintain the Extender

40
 AC750 WiFi Range Extender

5. Select Settings > Other.

CAUTION:
After you click the RESET button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.

6. Click the RESET button.

A confirmation pop-up window opens.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about one
minute.

Update the Firmware

Unless you changed the setting in the Firmware Update page previously, the extender is set
up to check for new firmware automatically at login.

 To check manually for new firmware and, if available, update the firmware:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.

Monitor and Maintain the Extender

41
 AC750 WiFi Range Extender

5. Select Firmware Update.

6. Click the CHECK ONLINE button.

7. If new firmware is available, follow the onscreen prompts to download it onto your computer.

Note: You might need to unzip the firmware file.

8. Click the BROWSE button.

9. Locate and select the new firmware file.
The firmware file name ends with a .chk extension.

CAUTION:
After you click the UPLOAD button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.

10. Click the UPLOAD button.

The firmware update starts and the extender restarts. The firmware update process takes
about two minutes.

Restart the Extender Remotely

You can log in to the extender and restart it. When the extender restarts, all WiFi-enabled
computers and mobile devices that are connected to its WiFi network are automatically
disconnected.

 To restart the extender remotely:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.

Monitor and Maintain the Extender

42
 AC750 WiFi Range Extender

5. Select Settings > Other.

6. Click the RESTART button and click the Yes button to confirm.
The extender restarts, which takes about two minutes.

Monitor and Maintain the Extender

43
5. FAQs and Troubleshooting
5
This chapter covers the following topics:
• FAQs
• Cannot Connect to the Extender
• Cannot Join a WiFi Network

44
 AC750 WiFi Range Extender

FAQs
This section provides answers for difficulties you might experience with the extender.
The NETGEAR installation assistant keeps asking me for my network password
(passphrase) or security key, and I am sure that I entered the correct password. What
can I do?
The extender is probably placed at the borderline of the range covered by the router or
access point. For more information about where to place the extender, see Place the
Extender and Apply Power on page 10.
If you are using WEP security, make sure that you are typing the network password in the
correct field.
Can I set up the extender in extender mode if I connect it to the router or access point
with an Ethernet cable?
No. The extender is designed to connect wirelessly to the router or access point if it is in
extender mode. If the extender is in access point mode, you can connect it to the router or
access point with an Ethernet connection. For more information about access point mode,
see Use the Extender in Access Point Mode on page 15.
I forgot my login user name and password. What can I do?
In the login window, click the Username & Password Help link to answer the security
questions that you set up during the initial setup. For more information, see Recover a
Forgotten User Name or Password on page 36.
How do I restore the extender to its factory default settings?

 To restore factory settings:

1. Use a sharp object such as a pen or paper clip to press and hold the Factory Reset
button on the extender until the Power LED blinks amber.
2. Release the Factory Reset button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
I am connected to the extender WiFi network and launched a browser. I can’t I see the
NETGEAR installation assistant. What can I do?
Try these troubleshooting steps:
• Make sure that your computer is set up to use DHCP (most are).
• Make sure that the Device Link LED is green and that you are using a valid IP address.
• Relaunch the web browser and enter www.mywifiext.net in the address field. Type your
user name and password and click the LOG IN button.

FAQs and Troubleshooting

45
 AC750 WiFi Range Extender

Cannot Connect to the Extender

If you cannot connect to the extender, determine what prevents you from connecting:
• If you forgot your user name or password, click the Username & Password Help link.
For more information, see Recover a Forgotten User Name or Password on page 36.
• If your browser displays an error page, include http:// in the address field of your browser
by typing http://www.mywifiext.net.
• If you already set up the extender but can no longer connect to it over WiFi, check to see
if the Device Link LED is off or red. This indicates a poor connection or no connection.
Check to see if you accidentally connected to a different WiFi network instead of the
extender network.
• If you cannot get a WiFi connection working, you can use an Ethernet cable to connect
your computer to the extender.

Cannot Join a WiFi Network

To join a WiFi network, you must know its network name (also called the SSID) so that you
can select it. If the network is secure, you must know the passphrase or key. If the extender
does not connect to the network that you select, the cause might be one of the following:
• It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart
Setup (see Run Smart Setup on page 16) to select a WiFi network and retype the
passphrase or key. The passphrase or key is case-sensitive. For example,
PASSWORD25 is not the same as Password25 or password25.
• If the extender cannot detect your WiFi network, check to see if your WiFi network is still
working. Make sure that the WiFi router is turned on. If possible, move the extender
closer to the WiFi router.
• If the extender Device Link LED is red, the WiFi connection between the WiFi router and
the extender is poor. You can establish the best connection with a clear line of sight
between the extender and the WiFi router. Make sure that no physical obstacles exist
between the extender and the WiFi router, and try to move the extender closer to the WiFi
router.
If you use Smart Setup, and the extender does not connect to the WiFi router, does not
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup
displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the
NO, CONFIGURE MANUALLY button.

FAQs and Troubleshooting

46
A. Supplemental Information
A
This appendix includes the following sections:
• Factory Default Settings
• Technical Specifications

47
 AC750 WiFi Range Extender

Factory Default Settings

The following table includes the factory settings for the extender. You can use the Factory
Reset button or by logging in and clicking a RESET button to return the extender to these
settings. (See Return the Extender to Its Factory Settings on page 40.)
Table 2. Factory default settings

Feature Setting

Setup Wizard Enabled

WiFi communication Enabled

WiFi network names (SSIDs) NETGEAR_EXT

Security Disabled

Transmission speed Auto1

Country/region Varies by region

Operating mode 802.11a/b/g/n/ac

Data rate Up to 300 Mbps for 2.4 GHz network and 433 Mbps for 5 GHz network

DHCP Client enabled

1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.

Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications

Feature Description

Network protocol and standards Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
compatibility

Power consumption 100–240V, 50/60 Hz, 0.16A maximum

Physical specifications • Dimensions: 122 x 74 x 38 mm (4.8 x 2.9 x 1.5 in.)

• Weight: 213 g (8.15 oz)

Supplemental Information
48
 AC750 WiFi Range Extender

Table 3. Technical specifications (continued)

Feature Description

Environmental • Operating temperature: 32° to 104°F (0° to 40°C)

• Operating humidity: 90% maximum relative humidity,
noncondensing
• Electromagnetic emissions: Meets requirements of FCC Part 15
Class B.

Interface • Local: 10BASE-T, 100/1000BASE-Tx, RJ-45

• 802.11ac, 802.11n, 802.11a, 802.11g, 802.11b

Supplemental Information
49