0% found this document useful (0 votes)
3 views1 page

Laboratory Exercise 4 With The Aid of Diagram Illustrate The Procedure For Checking The Power Supply in A Typical ATX Power Supply

Com

Uploaded by

solomon isaac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
3 views1 page

Laboratory Exercise 4 With The Aid of Diagram Illustrate The Procedure For Checking The Power Supply in A Typical ATX Power Supply

Com

Uploaded by

solomon isaac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Laboratory exercise 4

With The Aid Of Diagram Illustrate The Procedure For Checking The Power Supply In
A Typical ATX Power Supply
1. Ensure Safety: Before proceeding, make sure to unplug the power supply from the wall outlet and allow
it to discharge for a few minutes to avoid any electrical hazards.

2. Open the Computer Case: Remove the screws or latches securing the computer case and open it to
access the internal components. Locate the power supply unit (PSU) at the back of the computer case.

3. Disconnect Power Cables: Disconnect all power cables connected to the PSU, including the main 24-pin
ATX power connector, 4/8-pin CPU power connector, and any peripheral connectors (SATA, Molex, etc.).

4. Prepare the Power Supply Tester: If you have a power supply tester, connect it to the 24-pin ATX power
connector of the PSU. Ensure that the tester is securely plugged in and the power supply is turned on (if
applicable).

5. Power On the PSU: Some power supply testers have an on/off switch, while others automatically turn on
when connected. Activate the power supply by pressing the power button on the tester or flipping the
switch.

6. Observe the Tester Readings: The power supply tester should display voltage readings for each pin on
the 24-pin ATX connector. Refer to the tester's user manual or documentation to interpret the readings.
Make sure the voltages are within the acceptable range specified for each pin.

7. Test Peripheral Connectors (Optional): If your power supply tester supports it, you can also test the
peripheral connectors (SATA, Molex, etc.) by connecting the appropriate cables and observing the readings
on the tester.

8. Assess the Results: Compare the voltage readings obtained from the power supply tester with the
specifications provided by the manufacturer. If the readings are significantly outside the acceptable range
or if the tester indicates a failure, it may indicate a faulty power supply.

9. Reconnect Power Cables: Once you have completed the power supply testing, reconnect the power
cables to their respective connectors, ensuring a secure and proper connection.

10. Close the Computer Case: Put the computer case cover back on and secure it with screws or latches.

You might also like