GPS COLOR LCD PLOTTER SOUNDER

GPS COLOR LCD PLOTTER

INTRODUCTION
We thank you very much for your purchasing our product.

Please be sure to read this operation manual carefully and

understand what it describes before you operate this unit in order to
keep your safety.
After you read this manual, please keep it at the place where you
will not lose or break so as to read soon when it is necessary.
In case that you resell or transfer this unit, please give it to the new
owner.
We will not be responsible for product liability (PL) law relating to
damage to human or physical property from operation which is not
described on this manual or wrong operation.

DEFINITION OF SYMBOL MARK[CAUTION FOR SAFETY]

incur the accident resulting in the death or serious

wound unless you keep the descriptions.
Be in danger of incurring the accident resulting in the death

or serious wound unless you keep the descriptions.

Be in danger or incurring the slight wound to human or
damage to other physical property unless you keep the
descriptions

Shows “PROHIBITION” which should not be done.

Shows “COMPULSION” which should be done surely.

Do not reproduce a part or all of contents described on this manual without

our approval.
Please understand that the unit may differ from contents described on this
manual partially due to change of specifications and so on.
If you have questions, errors or omission on this manual, may we trouble
you to inform us?
CONTENTS

BASIC OPERATION

OPERATION OF PLOTTER
C-MAP INSTRUCTION
OPERATION OF FISH FINDER
(FOR HE-7301II, HE-1501)

REFERENCE
 CAUTION ON SAFETY (PLEASE MAKE SURE TO READ)
This section explains the important cautions in order to prevent the
person who will use our product or other persons from human damage
or damage to their property.

1.HANDLING OF MAIN UNIT

High voltage is applied to the inside of unit. No one besides authorized

technician should disassemble or modify it. Unless you keep it, the

accident resulting in the electric shock will occur.

Please be sure to consult with dealer when you want to repair

Do not install it in simple method.

It causes to the accident like human damage.

Do not use the information displayed on the screen of unit for navigation
directly. It causes to the marine disaster. Please be sure to use the
official marine charts for navigation judgment.
Do not operate the unit when you operate the boat.
It causes to the marine disaster. Please be sure to operate it after due
confirming the surrounding safety.
Do not put the power on in the presence of flammable materials.
It causes to firing.

Do not use the power supply besides the specified ones.

It causes to heating or firing.

Do not disassemble or modify the unit.

It causes to firing, electric shock or injuring.

Take off the power cable in case of trouble, emitting smoke or firing.
If you continue to operate, it causes to firing or electric shock.
Please make sure to consult with dealer you purchased.

1
 Do not install at the place where rain or spray dashes directly.
It causes to firing or injuring.

Do not install at the place where it becomes hot.

It causes to firing, human damage or electric shock due to increasing
temperature inside the unit.
Be sure to ground.
If grounding is poor, it may receive interference from other equipments
or it may provide interference with other equipments.

2. HANDLING OF CABLES

Be sure to use the specified power supply cable and fuse.

It causes to heating or firing.

Do not leave the power plug as it is while it is pulled out the unit.
If the plug gets wet, it causes to heating or firing due to short circuited.

Be sure to wire in order to prevent the cables from interfering to operate

unit. If feet of crews or operating equipments are caught in cables, it
causes to the accident. Do not put the heavy objects on cable or do not
bend cables excessively.
Do not disassemble or modify the cables.
It causes to heating, firing or electric shock.

Do not use the damaged cables.

It causes to firing or electric shock.

Do not pull the cable when you pull out the plug.
It causes to firing or electric shock because the cable is broken.
When you pull out the plug, make sure to have it your hand and pull it.

2
3.HANDLING OF TRANSDUCER AND WATER TEMPERATURE SENSOR

Work on the board is too unstable and risky.

Installation and maintenance of transducer and water temperature sensor
should be done after you land and fix the boat.

Installation of the transducer or water temperature sensor inside the hull

with adhesive should be done while you ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
Perfect waterproof treatment should be done when you install the
transducer or water temperature sensor through the hull.
If water proof is not sufficient, it causes to marine disaster because water
comes in. Do not install on the aluminum boat. (It may cause to
corrosion.)
When you work using electric tools, please keep your hands dry.
If your hands are wet, It causes to electric shock.
When you pull out or insert the plug of transducer or water temperature
sensor, please be sure to turn the power switch off.
It causes to electric shock.

4.HANDLING OF REMOTE

Do not use the leaked battery. (When using wireless remote)

When leaked liquid stains on body, it causes to damage.
In case of staining, wash out with clean water immediately.

Keep at place where it will not drop due to vibration, etc. when it
is not used. It causes to accident like human damage.

3
5. HANDLING OF GPS ANTENNA

Work on the board is too unstable and risky. Installation and maintenance of
GPS antenna should be done after you land and fix the boat. Unless you
keep it, human damage resulting in death or serious wound will occur.

Do not install it simply.

It causes to accident

GPS antenna should be mounted at the highest position on the boat to

maximum satellite reception.
Obstacles near the antenna will shield it from satellite. Then the time of
reception will increase or positioning accuracy will become worse.

6. TFT LCD PANEL

As TFT LCD panel is made with high precision technology, over 99% is
effective pixel but less than 0.01% pixel is lacked or there exists pixel light
always. It is not trouble. Please understand it in advance.

4
7. CAUTION ON OPERATION

Be sure to put the power switch off when

you start to run the engine.

When the engine starts to run, voltage of battery varies heavily. It may influence
to the unit. Make sure to put the power switch off when you start to run the engine.

Power supply should be

11-35VDC!

Please operate the unit at 11-35VDC of power supply voltage.

Prohibited to use the organic solution!

Do not clean the unit with organic solution like thinner, alcohol or etc. as some
parts of the unit and panel are coated or made by plastic. In case it is too dirty,
soak the soft cloth in a synthetic detergent and clean with it after wringing well.

Take memo of important datum!

The unit is not designed for storing the datum permanently. Important datum
like menu contents should be recorded on the notebook, etc.

5
FEATURES

Process of drawing coastlines at high speed!

High performance CPU enables you to draw coastlines at high speed.

Keys on panel let you simple operation of various functions

Each operation key are located at best position to operate efficiently.
Optional remote enables you to operate various functions easily at your hand.
It can be used as wireless one if you remove cable.
Only when wireless remote is used, it operates with internal battery. It helps
to save power consumption.

Many information!
You can save up to 1,000 points of waypoints, up to 24,000 points of event marks
and up to 32,000 points of wakes. It is easy to distinguish the wakes, waypoints
and event marks as they are shown in color.

Two stations available (Optional)!

Compact GPS antenna is applied.

Date, Depth, Water Temperature can be indicated with Event Mark

RGB input connector is prepared (HE-1501, HE-1502).

Image from external camera, etc. can be displayed.

6
 DESCRIPTIONS

1.FRONT PANEL

Infrared ray sensor

POWER KNOB CURSOR ON/OFF page 24

Power ON/OFF →page 16 Switch display/non display of cursor.
Adjust brightness →page 20 RANGE Switch Page 27
GAIN 2 →page 75 Alternately switch range set on menu.
Adjust sensitivity of left display on dual WAKE ON/OFF Page 38
freq. mode. * Enter specified event Switch display or non display of wake.
mark →page 60 WAKE COLOR page 38
GAIN 1 →page 74, 75 Select color of displayed wake.
Adjust sensitivity of single freq. mode NORTH UP page 27
and right display on dual freq. mode. Just upper of display turns north.
*Enter specified event mark COURSE UP page 27
→page 60 Just upper of display turns bearing of
SHIFT →page 76 own boat.
Move displayed depth range. EVENT MARK page 32
*Enter specified event mark. Enter event mark on the display.
→Page 60 EVENT SHAPE page 32
RANGE →page 75 Show event mark on the display.
Set displayed depth range. WP SAVE page 41
*Set size of distance market. Store waypoint.
→page 60 WP RECALL page 46
CLR Recall waypoint.
It is used when you want to delete or WIDE AREA(REDUCTION) page
cancel item. 26
MODE →page 17 Reduce the display (Wide area).
It switches Fish Finder mode and DETAILED (EXPANSION) page 26
Plotter mode. Enlarge displayed map (detail).
CENTER KEY ZOOM page 77, 78
Move map and cursor. Move expanded area toward sea surface
It is also used to select menu item. or sea bottom. (When manual EXP. is
MENU →Page 14 selected.
Show menu mode. * Enter specified event mark.
SET page 60
It is used when you execute selected menu
7
Infrared ray sensor

POWER KNOB WAKE ON/OFF page 38

Power ON/OFF page 16 Switch display or non display of wake.
Adjust brightness page 19 WAKE COLOR page 38
EVENT MARK Select color of displayed wake.
Enter event mark ? page 60 NORTH UP page 27
EVENT MARK Just upper of display turns north.
Enter event mark + page 60 COURSE UP page 27
EVENT MARK Just upper of display turns bearing of
Enter event mark page 60 own boat.
ADJUST of DISTANCE MARKER (VRM) EVENT MARK page 32
Reduce distance marker (VRM). Enter event mark on the display.
page 60 EVENT SHAPE page 32
CLR Show event mark on the display.
It is used when you want to delete or WP SAVE page 41
cancel item. Store waypoint.
MODE page 17 WP RECALL page 46
Switch Normal display, GPS receiving Recall waypoint.
status, Navigation, Receiving sentence WIDE AREA(REDUCTION) page
monitor and transmitting sentence 26
monitor display. Reduce the display (Wide area).
CENTER KEY DETAILED(EXPANSION) page 26
Move map and cursor. Enlarge displayed map (detail).
It is also used to select menu item. EVENT MARK
MENU page 14 Enter event mark page 60
Show menu mode. EVENT MARK
SET Enter event mark page 60
It is used when you execute selected menu. EVENT MARK
CURSOR ON/OFF page 24 Enter event mark page 60
Switch display/non display of cursor. ADJUST of DISTANCE MARKER (VRM)
RANGE SWITCH page 27 Enlarge distance marker (VRM).
Alternately switch range set on menu. page 60

8
2.REAR SIDE

Power Supply for monitor(5P)(Option)

RGB Video Signal Output Option
External Input/Output (6P)
Remote (4P)
To GPS/DGPS Antenna (6P)
Water Temperature Sensor (8P) (Optional)
DC Power Supply (2P)
Transducer (3P)
For HE-7301
5 Pins for 50 200kHz
RGB Input

9
 .REMOTE (OPTION)
RANGE (for HE-7301 ) page 73
Set displayed depth range. Enter
specified event mark. page 60
GAIN 2 (for HE-7301 ) page 75
Adjust sensitivity of left display on dual
freq. mode. * Enter specified event
mark page 60
SHIFT (for HE-7301 ) page 76
Move displayed depth range.
Enter specified event mark.
Page 60
ZOOM page 77, 78
Move expanded area toward sea surface
or sea bottom. (When manual EXP. is
selected.
* Enter specified event mark.
page 60
GAIN 1 page 74, 75
Adjust sensitivity of single freq. mode
and right display on dual freq. mode.
*Enter specified event mark
POWER ON/OFF page 60
Turn power ON/OFF. WAKE COLOR page 38
MODE page 18 Select color of displayed wake.
It switches Fish Finder mode and EVENT SHAPE page 32
Plotter mode. Show event mark on the display.
USER KEY Page 27 WP RECALL page 46
Alternately switch range set on menu. Recall waypoint.
CENTER KEY WP SAVE page 41
Move map and cursor. Store waypoint.
It is also used to select menu item. EVENT MARK page 32
DETAILED (EXPANSION) page 26 Enter event mark on the display.
Enlarge displayed map (detail). WIDE AREA(REDUCTION) page
NORTH UP page 27 26
Just upper of display turns north. Reduce the display (Wide area).
COURSE UP page 27 CURSOR ON/OFF page 24
Just upper of display turns bearing of Switch display/non display of cursor.
own boat. SET
LINE ( page 48) It is used when you execute selected menu.
Draw line on map. CLR
WAKE ON/OFF page 38 It is used when you want to delete or
Switch display or non display of wake. cancel item.
MENU Page 14
10
Show menu mode.
 MODE page 18
It switches Fish Finder mode and Plotter
mode (for HE-7301 ).
CENTER key
Move map and cursor.
It is also used to select menu item.
DETAILED (EXPANSION) page 26
Enlarge displayed map (detail)
EVENT MARK page 32
Enter event mark on the display
WAKE ON/OFF page 38
Switch display or non display of wake
WP SAVE page 41
Store waypoint.
Simple Remote WIDE AREA(REDUCTION) page
Option 26
Control keys which are usually Reduce the display (Wide area).
used are concentrated. CURSOR ON/OFF page 24
Switch display/non display of cursor.

HANDLING OF REMOTE (OPTION)

Do not use leaked battery.(When using wireless remote)

When leaked liquid stains on body, it may cause to damage.
In case of staining, wash out with clean water immediately.

Keep at the place where it will not drop due to vibration, etc. when
it is not used. It causes to accident like human damage.

When you operate it, face the top of remote to infrared ray sensor of main unit and
press the key.
2 pcs. sum-3 (AA) batteries are required for operation in case of wireless remote.

11
HOW TO PUT BATTERIES
Loose two screws and take off the rear cover.
1
2 Put the batteries in correct polarity.
Do not fasten screws strongly.

CAUTION ON BATTERIES
If you fail to use the battery, it causes to leakage
of solution or explosion.
Please make sure to keep the followings;
Put the batteries in correct polarity.
Do not use new battery and used battery or
different kinds of batteries together.
Battery can not be charged.
When remote is not used for a long time, take
out the batteries.
When the solution is leaked from battery, wipe
off the stained solution from case, and then
put new batteries in.

CAUTION ON REMOTE
Take care not to hit with strong light like direct
sun ray on infrared ray sensor of main unit. In
some case you can not operate the key on
remote.
Take care not to put the obstacles between
remote and infrared ray sensor.
Do not drop it or keep it as the place where
there is direct sun ray. Handle it carefully.

12
Display is HE-7301 . On the HE-7302 , fish finder display on right side of screen
is not shown.
600W-200kHz, 1.2kW-200kHz, 3.0kW-200kHz, 600W-50kHz, 1.2kW-50kHz or 3.0kW-
50kHz does not have dual frequency function.

13
 HOW TO OPERATE MENU

How to operate menu

You can change contents of item which you set by selecting menu item using
[MENU] key, [CENTER] key, {SET} key and [CLR] key.
CLR key MENU key
1 Press [SET] key.

2 Select desired item with Upper Lower

of [CENTER] key.

3 Show next menu with Right of [CENTER]

key and select desired item.
CENTER key SET key
Press [MENU] key to return previous display.
Until set items are shown, repeat procedure 2 and
procedure 3 to the extent of necessity.

Change the setting by executing [enter of

4 numbers] and [selection of items].

Press [CLR] key to close menu display.

Center key 5

14
 BASIC OPERATION
POWER ON/OFF
HOW TO CHANGE THE DISPLAY
TO CONTROL BRIGHTNESS OF SCREEN
TO SHOW SIMULATION DISPLAY

15
POWER ON/OFF

Power ON/OFF

POWER Knob
1 By turning [POWER] knob clockwise, alarm
comes on and power turns ON. If firstly [NOTE]
is shown and map is continuously shown,
starting is complete.

2 By turning [POWER] knob counterclockwise,

Above figure is HE-7301 . power turns OFF.

Power ON/OFF is not done with [ON] key or

[OFF] key on remote. Please operate with
[POWER] knob on main unit surely.

Note When you turn the power ON for the first time after installed, it takes about
5-30 minutes to show the correct position in order to collect the satellite datum.
Note 2 When the engine starts to run, battery voltage varies and may affect to main
unit. Start the engine after the power of main unit is turned OFF.

16
HOW TO CHANGE THE DISPLAY

Change the display

In case of

1 Each time when you press [MODE] key, display

changes to [Fish Finder], [Plotter & Fish Finder]
and [Plotter].

MODE key

Change of display division proportion

When [Plotter & Fish Finder] display is shown,
you can change the display division proportion.
When [Display Division Change] is shown after
pressing [MODE] key for a long time, change
division size with of [CENTER] key.

In case of

1 Each time when you press [MODE] key, you can

change from NORMAL display to GPS Receiving
Status, Navigation, Receiving Sentence Monitor,
Transmitting Sentence Monitor.

MODE key

In case of Remote

1 You change the display mode by pressing either

[S], [S+PL] or [PL].
S Fish Finder mode is shown.
S+PL Plotter mode is shown on left of
screen and fish finder mode is
shown on right of screen.
PL Plotter mode is shown.

17
 Change of display division proportion
When [Plotter & Fish Finder] display is shown,
you can change the display division proportion
by pressing [S] key and [PL] key for a long time.
(It is effective for only standard supplied remote
and can not be done with simple remote).

MEMO
You can also change the display by pressing
[MODE] key of simple remote (option).

18
TO CONTROL BRIGHTNESS OF SCREEN

Control of brightness

1 Adjust brightness by turning [POWER] knob of

main unit.
Turn POWER knob clockwise Screen becomes
light.
Turn POWER knob counterclockwise: Screen
becomes dark.
POWER knob
Above figure is HE-7301 .

TO SHOW SIMULATION DISPLAY

To show simulation display

CLR key This unit has internal simulation. Even if you
do not connect with GPS or transducer, you
can practice the operation, etc.

1 Select [8.OTHERS] [8.INITIAL] [5.SIMULA

TION] on menu. Select item with [CENTER] key
and press [SET] key.
CENTER key SET key
Above figure is HE-7301 . Simulation display OFF.
FIX Own boat is fixed.
MOVE Own boat moves.

In case of simulation display, DEMO is indicated on the left edge of screen.

Select “OFF” to return normal display and press [SET] key.
If you indicate cursor when you start simulation display, own boat is shown at that
position.
Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

19
 OPERATION OF PLOTTER
TO USE THE CURSOR
TO MOVE THE DISPLAY
TO ENLARGE/REDUCE THE PICTURE
TO SELECT THE DISPLAY DIRECTION
TO SET RANGE YOU ALWAYS USE
TO USE MAP CARD
TO USE MEMORY CARD
TO ENTER EVENT MARK
TO ERASE EVENT MARK
TO EDIT EVENT MARK
TO SHOW (RECORD) WAKE
TO ERASE WAKE
TO MEMORIZE (SHOW) WAYPOINT MARK
TO ERASE WAYPOINT MARK
TO EDIT WAYPOINT MARK
TO SET WAYPOINT NAVIGATION
TO CLEAR WAYPOINT NAVIGATION
TO DRAW LINE
TO ERASE LINE
TO REGISTER (ERASE) ROUTE
TO RECALL REGISTERED ROUTE (SETTING ROUTE NAVIGATION)
TO ADVANCE WAYPOINT/TO RETURN WAYPOINT
TO SHOW DEPTH LINE
TO INDICATE PLACE NAME, TIDE, CURRENT AND ETC
TO SHOW LATITUDE/LONGITUDE LINE (GRID)
TO SOUND ARRIVAL/ANCHOR WATCH/OFF COURSE ALARM
OWN BOAT’S VECTOR AND COLOR OF OWN BOAT’S MARK
TO SET READOUT ACCURACY OF EACH INFORMATION
TO CHANGE SIZE, COLOR AND ETC. OF CHARACTERS
TO SHOW OWN BOAT POSITION WITH TIME DIFFERENCE OF LORAN C
TO SET DGPS BEACON RECEIVER
TO ALLOCATE FISH FINDER KEY TO PLOTTER KEY
TO ADJUST CONTRAST
LIST OF PLOTTER MENU AND MEANING

20
TO USE THE CURSOR

ON/OFF of Cursor
Following operations are available by cursor.
Latitude/longitude at optional position of
display are shown.
Distance, direction and required time from
own boat position to cursor are shown.
Enter/erase of event marks, waypoints, etc.
CURSOR ON/OFF key
1 By pressing [CURSOR ON/OFF]key, cursor is
shown. By pressing once more while cursor is shown,
it disappears.
Cursor Line
“Cursor line” is line that connects between own
boat and cursor when the cursor is shown.
“Whether cursor is shown or not” is selected on
menu.
When latitude/longitude of own boat is not
indicated, cursor line, distance, direction
and required time from own boat’s position
to cursor is not shown.

To move the cursor

1 Indicate
ON/OFF]key.
the cursor
Cursor
by
moves
pressing [CURSOR
up/downward or
left/rightward with of [CENTER]
key.

CURSOR ON/OFF key In case of remote

[CENTER] key operates by [DIRECTION/
CENTER] key.
When the cursor is indicated
Moves map so that cursor’s position moves to
center of screen.
When the cursor is not indicated
Moves map so that own boat’s position moves
to center of screen.
DIRECTION key (CENTER key)

Note) [CENTER] key operates as a button for moving the cursor when cursor is
indicated and it operates as a button for moving display when cursor is not indicated.

21
TO MOVE THE DISPLAY

Movement of display

1 Erase the
ON/OFF] key.
cursor by pressing [CURSOR

2 Display moves up/downward or left/rightward

with key.
CENTER key

CURSOR ON/OFF key

Movement of display
When own boat marker is out of screen, it moves
map automatically so that own boat marker is
always indicated at center of screen in case that
[6.READOUT SETTING] [1.MAP READOUT]
[7.MAP SCROLL] [1.CETERING] is ON.
However, in case of moving the display
manually, this function does not activate.
After you indicate own boat to center of screen
DIRECTION key
by pressing [CENTER] key, display moves
CENTER key
automatically again.
When map are shown on dual display, picture
moves to left of map or top of map. Picture can
not move to right of map or down of map.

22
TO ENLARGE/REDUCE THE PICTURE

Enlarging and reducing picture

Expansion/Reduction of display
When the cursor is indicated, display expands/
reduces at center of cursor’s position. When the
cursor is not indicated, display expands/reduces
at center of own boat. However, display expands/
reduces at center of screen when display moves
manually.
RED key EXP key Display differs between single map display and
dual map display.

Scale
“SCALE” helps you to know the distance on the
EXP key screen. Color of range and scale are same as
wake’s.

In case of single map display

Display expands by pressing [EXP] key.
RED key Display reduces by pressing [RED] key.

In case of dual map display

Display expands by pressing [EXP] key. Display
reduces by pressing [RED] key. Corresponded
Map to scale range encircled by rectangle
expands or reduces.
Each time when you press key, map to be
expanded/reduced switches.
Scale range when maps are shown side Scale range when maps are shown up
by side. and down.
Left map can be expanded or reduced Upper map can be expanded or reduced on
on figure. figure.

23
TO SELECT THE DISPLAY DIRECTION

Selection of direction Either NORTH UP or COURSE UP is selected

1 by pressing [NORTH UP] key or [COURSE UP]

key.
[NORTH UP]: Just upper of display becomes
“North”.
[COURSE UP]: Just upper of display becomes
“Bearing of own boat”.
Course Up
NORTH UP key COURSE UP key
“Manual/Auto” course-up can be selected on
menu. (Refer to page 65.)
Auto Course Up ON
When bearing of own boat changes, just upper of
screen is shown as “Bearing of own boat”
automatically. This function is available under
the condition that boat speed is more than 1.5
knots and bearing of own boat turns more than
30 from just upper of screen.
Auto Course Up “OFF”:
Only when [COURSE UP] key is pressed, just
upper of screen is shown as “Bearing of own boat.”

Note) Automatic course up function is not effective by selecting “ON” of “AUTO COURSE
UP” on menu only. After selected it, please press [COURSE UP] key.

TO SET RANGE YOU ALWAYS USE

Setting the range

If you preset often used range, just only key

makes you quickly change the range. You can set up
to 2 ranges. You change range by pressing key.

1 Select [8.OTHERS] [3. SWITCH KEY] on menu.

RANGE Change key

Establish each items on [3.SWITCH KEY] (
2 page 60)
Each time when you press key, range
switches alternately.
3
Note It is effective when [6.REAOUT SETTING] [1.MAP READOUT] [9.TWIN
MAP is “OFF”.

24
TO USE MAP CARD

Coastline Data

Inserting Card
Take off card slot cover on the side of main unit.

Insert the map card into card connector while sticker side faces ahead.

Please make sure to face sticker side of map card (memory card) ahead. Unless you
keep it, internal connector may be broken.

Card slot cover

Loosen screw.
Take off card slot
cover.

Loosen screw.

Insert the card.

25
TO USE MEMORY CARD

Copy of data
Memory card
Data can be copied between main unit and memory card. Memory card you can use is
limited to our made card.
Contents which can be copied
Wake Event Mark Waypoint Line Route

Card slot cover 1 Take off card slot cover on the side of main unit.
While the power of unit is turned OFF, insert the
Loosen screw
2 map card into card connector while sticker side
faces ahead.
By turning the power ON, you show the normal
3 display.

4 Select [8.OTHERS] [2.MEMORY CARD] on

menu and operate each items. ( page 67)

After finished above procedure 4, it returns to

5 normal display. Then turn the power of unit
OFF and pull out memory card from slot. Finally
put the card slot cover.

Insert the card.

Take off card slot
cover.

Note 1 When you insert/take off memory card, make sure to the power of unit OFF.
Note 2 Storage of datum in this unit or memory card is not guaranteed to keep
permanently. Important datum should be kept in notebook or others.
Note 3 Make sure to face sticker side of card ahead. Otherwise, they are not shown on
the screen. Take care of facing sticker side ahead when inserting card.
Wrong insertion causes to damage.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

26
Store data from unit to card

CLR key
Select [8.OTHERS] [2.MEMORY CARD]
1 [2.STORE FROM UNIT TO CARD] on menu
and press right of CENTER key.

2 Enter block number of card which you store by

[NUMBER] key and press [SET] key.
Red block number indicates some data is
CENTER key SET key
stored in that block.

NUMBER key

Select item which you store with key

3 and press [SET] key.
Red letter item indicates that item’s data is
stored in card.

If data is not stored in card, copy is completed.

4 When data is stored in card, select
OVERWRITE
or CANCEL with [SET] key or [CLR] key.
NUMBER key
When rewriting is executed, previous data is
deleted.

27
Store data from card to unit

CLR key
1 Select [8.OTHERS] [2.MEMORY CARD]
[3.STORE FROM CARD TO UNIT] on menu
and press right of [CENTER] key.

2 Enter block number of card which you store by

[NUMBER] key and press [SET] key.
CENTER key SET key
Red block number indicates some data is
stored in that block.

3 Select item which you store with key and

press [SET] key.
Red letter item indicates that item’s data is
stored in card.

4 If data is not stored in unit, copy is completed.

When data is stored in unit, select item on below
figure by [SET] key or [NUMBER] key.

NUMBER key

28
TO ENTER EVENT MARK

To enter event mark at own boat’s position

CURSOR ON/OFF key

1 Press [EVENT MARK] key. Event mark is
shown at the position of own boat’s mark.
By pressing [EVENT MARK] key when cursor
is indicated, event mark is shown at the
position of cursor.

You can set any event mark with [EVENT

EVENT MARK key
SHAPE] key after you set [3.EVENT MARK]
[4.CHANGE OF SHAPE] on menu.
You can select from 8 types. page 64

Event Mark
You can enter event marks with different color
and shape to the position of fish school, shoals or
etc. at any option.
Shape 8 types, (selected on menu.)

Color Selected among red, yellow, green,

magenta, white, cyan, blue and color of wake.
Numbers of point Up to 24,000 points can be
entered on the display.
(Combination of shape and color is free.)
Event mark will be shown when the range
of map enlarges less than 50NM. When it’s
range reduce more than 80NM, all event
marks will be shown by “points”.

Comment (Name) of event mark

You can add “comment (name)” to each event
mark. page 36

Comment (name) of event mark will be indicated

only when the range of map enlarges more than
3NM.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

29
 To enter event mark with fish finder key

This function is effective at Plotter display only in case of

This function can not be used at Fish Finder display or Fish Finder/Plotter display.
Event mark key is used in case of

In case of HE-7301
1 Plotter display is shown by pressing [MODE]
key.
In case of remote
Plotter display is shown by pressing [PL] key.
MODE key

2 Event mark is entered at own boat’s position

when you press any fish finder key.

In case of HE-7302

In case of HE-7301 1 Event mark is entered at own boat’s position

Fish Finder key (Event Mark key) when you press any event mark key.

When cursor is shown, event mark is entered

at cursor’s position.

In case of HE-7301 , [8.OTHERS]

[8.INITIAL] [7.SPECIAL MENU] [8.F/F
KEY AT PL] on menu should be set to
“USED FOR PL KEY.”
In case of HE-7302
When it is delivered from factory, it is set
Event Mark key
to ”USED FOR PL KEY”.

30
TO ERASE EVENT MARK

To erase by color
All event marks which are selected by each color
are erased.
1 Select [3. EVENT MARK] [1.ERASE] 1.
ERASE BY COLOR on menu.

SET key
2 Select and designate color among [1.ERASE BY
COLOR].

3 All event marks which were designated by color

are erased by pressing [SET] key.

To erase by shape
All event marks which are selected by each
shape are erased.
1 Select [3. EVENT MARK] [1.ERASE] 2.
ERASE BY SHAPE on menu.

2 Select and designate shape among [2.ERASE BY

SET key SHAPE].

3 All event marks which were designated by shape

are erased by pressing [SET] key.

To erase all event marks

All event marks are erased.

1 Select [3. EVENT MARK] [1.ERASE] 3.

ERASE ALL on menu.

SET key 2 All event marks are erased by pressing [SET]

key.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

31
 To erase by cursor

Note 1 When unit is delivered from factory, [3.EVENT MARK] [1.ERASE]

[1.ERASE BY CURSOR] on menu is set to OFF. ( page 64) Set [ERASE BY
CURSOR] to ON to operate this function.

CURSOR ON/OFF key

1 By pressing [CURSOR ON/OFF] key, cursor is
indicated.

2 Stack cursor on event mark which you want to

erase with [CENTER] key.

CLR key SET key

3 By pressing [CLR] key, display to confirm

erasure is shown.

4 On the display to confirm,

Event mark is erased by pressing [SET] key.
Event mark is canceled by pressing [CLR] key.

Note 2 When map range is reduced more than 80NM, [ERASE BY CURSOR] can not
be executed. In this case, event mark is indicated by dot.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

32
TO EDIT EVENT MARK

To edit event mark

You can edit shape, color, latitude and longitude at every event mark manually. You
can also enter comment (name).

CLR key MENU key

Indicated List
1 Select [3.EVENT MARK] [5.LIST/EDIT] on
menu by pressing [MENU] key.

CENTER SET key

RANGE
2 Move the cursor with key and execute by
key [SET] key
change key

NXT Indicate next 10 items.

PRE Indicate previous 10 items.
100NXT Indicate 10 pages after.
100PRE Indicate 10 pages before.
NUMBER key TOP Indicate first 10 items.
LAST Indicate last 10 items.

ENTER/EDIT
1 Select [3.EVENT MARK] [5.LIST/EDIT] on menu
by pressing [MENU] key.

2 Move the cursor with of [CENTER] key

and select event number which you want to edit,
press [SET] key or of [CENTER] key. Then,
you can start to edit.

NUMBER
key

33
 Enterable characters
Symbol, number, alphabet (Capital, Small) and Katakana (Japanese character) can
be entered.
Operation during Edit mode
of [CENTER] key Select character and mark.
of [CENTER] key Move cursor before and after.
[SET] key Store edit contents. (However, you can not store unless
you enter all except comment.)
[CLR] key Cancel edit mode without storing. (Comment is deleted
when cursor is in comment column and comment is
written on it.)
[NUMBER] key Enter cursor position with number.
[RANGE CHANGE] key Mark color can be changed by pressing key at
“MARK SHAPE” position.
If you store after changing event number, preset edit content is stored in revised
event number. In this case, data of event number before change is not revised.

Deletion of Event Mark

1 Select [3.EVENT MARK] [5.LIST/EDIT] by

pressing [MENU] key.

2 Move the cursor with of [CENTER] key

and select event number which you want to
delete, press [CLR] key.
You can execute to delete by [SET] key and
cancel by [CLR] key.

4. Finish

1 Event mark list/edit mode is finished by

pressing [MENU] key.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

34
TO SHOW (RECORD) WAKE

Show (Record) of wake

WAKE ON/OFF key 1 By pressing [ WAKE ON/OFF] key, wake is recorded.

Previous recorded wake is also indicated again.
which indicates “During recording wake”
is shown on the lower left of screen.

Waypoint Mark

WAKE COLOR key

Wake Event Mark

By pressing [ WAKE ON/OFF] key when wake is
2 recorded, record is interrupted. on lower left of
screen disappears.
You can delete record by selecting [ WAKE
COLOR] on menu. page 39

3 Wake color changes each time when you press

[WAKE COLOR] key.
(Selectable from 7 colors, Red, Yellow, Green,
Magenta, White, Cyan, Blue)

Wake Track which own boat moved is called “Wake”. When wake is shown, wake is
continued to record. When wake is not shown, it’s recording is interrupted.
Memory interval of wake
Wake is continuous connected lines between each memorized own boat’s position
at certain interval. The memory interval is called “Memory interval of wake”.
There are advantages and disadvantages respectively in long interval and short
interval.

Interval Advantage Disadvantage

Long Long-term wake can be stored. Wake is shown roughly.
Short Wake is shown in detail. Wake can be stored for a short time.

35
 Upper limit of recording There is upper limit of wake which you can record.
Maximum numbers of point which you can store is 32,000 points. When wake points
exceed 32,000 points, wake from the oldest is erased. When you said for a long time
(distance), it is recommended to set the memory interval to long.

TO ERASE WAKE

To erase wake by color

All wakes which are selected by each color are
erased.
1 Select [1.WAKE] [4.WAKE ERASE]
[1.ERASE BY COLOR] on menu.

SET key
2 Select and designate color among [1.ERASE BY
COLOR].

3 All wakes which were designated by color are

erased by pressing [SET] key.

To erase all wakes

All wakes are erased.

1 Select [1.WAKE] [4.ERASE WAKES]

[2.ERASE ALL] on menu.

SET key
2 All wakes are erased by pressing [SET] key.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

36
 To erase wake by cursor

Note 1) When unit is delivered from factory, [1.WAKE] [4.ERASING WAKES]

[3.ERASE BY CURSOR] is set to OFF. ( page 63)
Set [ERASE BY CURSOR] to “ON” to execute this function.

CURSOR ON/OFF key

1 By pressing [CURSOR ON/OFF] key, cursor is
indicated.

2 Stack cursor on wake point which you want to

erase with [CENTER] key. Wake point is stored
in each memory interval of wake.
CLR key SET key

3 By pressing [CLR] key, display to confirm erase

is shown.

4 On the display to confirm,

Wake is erased by pressing [SET] key.
Erasing is canceled by pressing [CLR] key.

Note 2) Point to judge easily is starting point, terminal point and sharp corner of wake.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.
37
TO MEMORIZE (SHOW) WAYPOINT MARK

To memorize (show) waypoint mark

Waypoint Mark
Waypoint mark is mark that indicates “destination” or “turning point”.
Shape 8 types
Indicated Color Red, Yellow, Green, Magenta, White, Cyan, Blue, Wake color
Number of point up to 1,000 points

When waypoint is memorized (shown), waypoint mark and waypoint number (0~999)
is shown. Number is renewed each time when waypoint is memorized newly.
However, in case there are waypoints which were erased before, number will be used
from it.
Waypoint mark will be shown when map range enlarges more than 50NM.
In case it’s range reduces less than 80NM, all waypoints will be shown by “dots”.

Input of “Comment (Name)”

You can add “Comment (Name)” at each waypoint mark. page 44
When waypoint mark is shown by dot, “Comment (Name)” is not shown.

WP SAVE key
1 Press [WP SAVE] key. Waypoint mark and
waypoint number are shown.

They are indicated at cursor’s position when

cursor is shown and are indicated at own boat’s
position when cursor is not shown.

Change of Shape
Shape of waypoint mark is changed.

1 [2.WAYPOINT] [6.CHANGE OF SHAPE] is

selected on menu.

2 Designate desired shape of waypoint mark on

[6.CHANGE OF SHAPE].

38
TO ERASE WAYPOINT MARK

To erase waypoint by color

All waypoint marks which are selected by each
color are erased.
1 Select [2.WAYPOINT] [3.ERASE WAYPOINT]
[1.ERASE BY COLOR] on menu.
Select and designate color among [1.ERASE BY

SET key
2 COLOR].

3 All waypoint marks which were designated by

color are erased by pressing [SET] key.

To erase waypoint mark by shape

All waypoint marks which are selected by each
shape are erased.
1 Select [2.WAYPOINT] [3.ERASE WAYPOINT]
[2.ERASE BY SHAPE] on menu.

SET key
2 Select and designate shape among [2.ERASE BY
SHAPE] .

3 All waypoint marks which were designated by

shape are erased by pressing [SET] key.

To erase all waypoint marks

All waypoint marks are erased.

Select [2.WAYPOINT] [3.ERASE WAYPOINT]

1 [3.ERASE ALL] on menu.

SET key All waypoint marks are erased by pressing

2 [SET] key.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

39
 To erase waypoint marks by cursor

Note 1) When unit is delivered from factory, [2.WAYPOINT] [3.ERASE] [4.ERASE

BY CURSOR] is set to OFF. ( page 63)
Set [ERASE BY CURSOR] to “ON” to execute this function.

CURSOR ON/OFF key

1 By pressing [CURSOR ON/OFF] key, cursor is
indicated.

2 Stack cursor on center of waypoint mark which

you want to erase with [CENTER] key.

CLR key SET key

By pressing [CLR] key, display to confirm

3 erasure is shown.

On the display to confirm,

4 Waypoint mark is erased by pressing [SET] key.
Erasing is canceled by pressing [CLR] key.

Note 2) When map range is reduced more than 80NM, [ERASE BY CURSOR] can not be
executed. In this case, event mark is indicated by dot.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

40
TO EDIT WAYPOINT MARK

To edit waypoint mark

You can edit shape, color, latitude and longitude at every waypoint mark manually.

CLR key MENU key

Indicated List

1 Select [2.WAYPOINT] [7.LIST/EDIT] on menu by

pressing [MENU] key.

2 Move the cursor with key of CENTER

CENTER key and execute by [SET] key
SET key
key
RANGE Change key NXT Indicate next 10 items.
PRE Indicate previous 10 items.
100NXT Indicate 10 pages after.
100PRE Indicate 10 pages before.
TOP Indicate first 10 items.
LAST Indicate last 10 items.

NUMBER key

ENTER/EDIT
1 Select [3.WAYPOINT] [7.LIST/EDIT] on menu by
pressing [MENU] key.

2 Move the cursor with of [CENTER] key

and select waypoint number which you want to
edit, press [SET] key or of [CENTER] key.
Then, you can start to edit.

41
 Enterable characters
Symbol, number, alphabet (Capital, Small) and Katakana (Japanese character) can
be entered.
Operation during Edit mode
of [CENTER] key Select character and mark.
of [CENTER] key Move cursor before and after.
[SET] key Store edit contents. (However, you can not store unless
you enter all except comment.)
[CLR] key Cancel edit mode without storing. (Comment is deleted
when cursor is in comment column and comment is
written on it.)
[NUMBER] key Enter cursor position with number.
[RANGE CHANGE] key Mark color can be changed by pressing key at
“MARK SHAPE” position.
If you store after changing waypoint number, preset edit content is stored in
revised waypoint number. In this case, data of waypoint number before change is not
revised.
Deletion of Waypoint Mark
1 Select [2.WAYPOINT] [7.LIST/EDIT] by
pressing [MENU] key.

2 Move the cursor with of [CENTER] key

and select waypoint number which you want to
delete, press [CLR] key.
You can execute to delete by [SET] key and
cancel by [CLR] key.

4. Finish

1 Waypoint mark list/edit mode is finished by

pressing [MENU] key.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.
42
TO SET WAYPOINT NAVIGATION

Setting of waypoint navigation

When you set waypoint navigation, from own

boat’s position to waypoint is connected by line,
and latitude/longitude of waypoint, distance,
bearing and estimated time of arrival from own
boat’s position to waypoint are shown on the

WP RECALL key
1 upper left of screen.
Press [WP RECALL] key.
2 Enter number of waypoint with [NUMBER] key.
It is also done by stacking cursor on waypoint
mark instead of.

3 By pressing [SET] key, waypoint navigation is

NUMBER key set.

NUMBER
key

Note) Following conditions are necessary when you set waypoint navigation.
Latitude/Longitude of own boat’s position should be shown on the screen.
Waypoint should have been already set.

43
 Setting of Simple Waypoint Navigation

WP SAVE key
1 By pressing [CURSOR ON/OFF] key, cursor is
indicated.
Move cursor to point to be waypoint with

2 key.

By pressing [WP SAVE] key for a long time,

CURSOR ON/OFF key 3 simple waypoint is set.

Simple waypoint is temporary waypoint. Data is

not left in unit.

When map are shown on dual display,

picture moves to left of map or top of map.
Picture can not move to right of map or down
of map.

TO CLEAR WAYPOINT NAVIGATION

Cancellation of waypoint navigation

1 Press [WP RECALL] key.

2 By pressing [CLR] key, waypoint navigation is

canceled.

WP RECALL key

44
TO DRAW LINE

Drawing Line

Line
You can draw line on any position of display as you want.

1 By pressing [CURSOR ON/OFF] key, cursor is

shown.

2 Select [8.OTHERS] [1.DRAW LINE]

[1.START DRAW] and press [SET] key.
CLR key CURSOR ON/OFF key

Move the cursor to the position which you will

3 start to draw line (starting line) and press
[LINE] key.

4 Move the cursor to next position with

key and press [SET] key.

CENTER key SET key

5 Repeat procedure 4 if you want to continue
drawing line.

6 When you finish to draw line, press [CLR] key.

In case of remote
By pressing [CURSOR ON/OFF] key, cursor is
shown.
1
Move the cursor to the position which you will
2 start to draw line (starting line) and press
[LINE] key.

Move the cursor to next position with CENTER

3 key and press [LINE] key.

Repeat procedure 3 if you want to continue

4 drawing line.

When you finish to draw line, press [CLR] key.

5

45
 Distance between two points
When line is drawn, distance from a previous position (point) to “Cursor” position is
indicated. You can know the distance between any two points.
Line Color
Each time when you press [WAKE COLOR] key, color changes. Color can be
confirmed by color of “SCALE” or “RANGE” on the left of screen.
Color can be changed only when line is being drawn. Color can not be changed
after line was drawn.

TO ERASE LINE

To erase line by color

All lines which are selected by each color are
erased.

1 Select [8.OTHERS] [1. DRWA LINE]

[4.ERASE LINE] [1.ERASE BY COLOR] on
menu.
Select and designate color among [1.ERASE BY
SET key
2 COLOR].

3 All lines which were designated by color are

erased by pressing [SET] key.

To erase all lines

All lines are erased.

1 Select [8.OTHERS] [1.DRAW LINE] 4.

ERASE LINE [2.ERASE ALL].

2 All lines are erased by pressing [SET] key.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

46
 To erase line by cursor
By stacking cursor on line, erase line
respectively. It is necessary to make effective of
CLR key CURSOR ON/OFF key
function [ERASE BY CURSOR] on menu
beforehand in order to achieve this function.
page 67

1 Select [8.OTHERS]
[4.ERASE LINE]
[1.DRAW
[3.ERASE BY CURSOR].
LINE]

Set [3.ERASE BY CURSOR] to “ON”. page

CENTER key
2 69

By pressing [CURSOR ON/OFF] key, cursor is

3 shown.

Stack cursor on line which you want to erase

4 with .

5 By pressing [CLR] key, line is erased.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

47
TO REGISTER (ERASE) ROUTE

To register (erase) route

Route
Line connected between intermediate points is called “Route” and it is indicated by
points and lines.
Number of registered route
You can enter maximum 20 intermediate points (course change points) for one route
and can store up to 20 points. Registered routes are always shown on the wake mode
unless they are erased.
After you select route number on menu, you enter intermediate points (route change
points) in turn while moving the cursor.

CLR key Select [4. ROUTE] [4.ENTER ROUTE] on

1 menu.

CENTER key SET key

Enter Route number with [NUMBER] key and

2 press [SET] key.
A Route number in red color can not be used
because it has already been registered. Use
NUMBER key other number (white) or erase the route you
don’t need.

3 Stack cursor on intermediate point (course

change point) with of CENTER key
and press [SET] key. Designate next inter-
mediate points repeatedly. mark is
indicated on each intermediate point and they
are connected in line.

Route registration is completed by pressing [CLR]

4 key.

To erase route
NUMBER
Select [4.ROUTE] [3.ERASE ROUTE] on
key
menu. ( page 64)

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

48
TO RECALL REGISTERED ROUTE (SETTING ROUTE NAVIGATION)

Recalling route (Setting route navigation)

1 Select [4.ROUTE]
menu.
[1.RECALL ROUTE] on

2 Enter route number.

SET key
3 Route navigation is set by pressing [SET] key.

Route Navigation
When you ship according to the pre-registered
route, next intermediate point (course change
point) is automatically selected each time when
you pass the intermediate point (course change
point) and navigation information is renewed.
Route Navigation Display
(1)When you recall route, the nearest point to
own boat’s position from the first intermediate
point or last intermediate point (
for this case) is registered as starting point. At
the same time, own boat is connected with
next intermediate point (course change point)
as “waypoint line”.
(2)If it is judged that own boat passes the
intermediate point (course change point)
and it goes to the intermediate point (course
change point) , then waypoint line connects
between own boat’s position and intermediate
point (course change point) .
(3)Until own boat passes the last intermediate
point (course change point), this operation is
repeated.

Note In case of setting “Route Navigation”, the following conditions are necessary.
Route has been already set.
Latitude/longitude of own boat are shown on the screen.
However, when the power of main unit is turned OFF, setting of route navigation
is canceled.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

49
TO ADVANCE WAYPOINT/TO RETURN WAYPOINT

To advance/return waypoint
When route navigation is set, waypoint line is
switched to next intermediate point (course
change point) on route in turn.

Waypoint Line: Line connected between own

boat and intermediate point .( page 52)

1 Set Route Navigation. ( page 51)

SET key Select [4.ROUTE] [5.ADVANCE
2 WAYPOINT] on menu.

Each time when you press [SET] key,

3 waypoint line is switched to next intermediate
point.
Each time when you press [SET] key on
display [4.ROUTE] [5.RETURN
WAYPOINT], waypoint line is switched to
previous intermediate point.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

50
TO SHOW DEPTH LINE

To show depth line

Depth Line
Depth line is line that same deep bottoms are connected.
You can show or erase the depth line

Designate [6.READOUT SETTING] [1.C-MAP

1 SETTING] [1.DEPTH LINE]
[1.SOUNDING LINE] on menu.

TO INDICATE PLACE NAME TIDE CURRENT AND ETC.

To indicate place name, tide, current and etc.

The following objects can be indicated.

1.NAME
2.TIDE,CURRENT
3.SEABED TYPE
4.WRECKS, OBSTN
5.PORT, PORT SERVICE
6.ROAD

1 Select [6.READOUT SETTING] [1.C-MAP

SETTING] [6.OTHER OBJECT] on menu.

2 Set each item of [6.OTHER OBJECT].

RED key EXP key

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

51
 After you finish menu, adjust range with [EXP]
3 key, [RED] key or key and then indicate
place name, other name, fish shoal, lighthouse
and etc.

Range Change key

RANGE Change key

RED key

EXP key

TO SHOW LATITUDE/LONGITUDE LINE (GRID)

To Show latitude/longitude line

Select [6.READOUT SETTING] [1.C-MAP
1 SETTING] [2.LAT/LON GRID] on menu.

Set displayed color with

2 of CENTER key.
When “OFF” is selected, latitude/longitude line
is not indicated.

TO SOUND ARRIVAL/ANCHOR WATCH/OFF COURSE ALARM

To sound alarm
When waypoint navigation is functioned,
following three types of alarm setting are
available.

Arrival alarm:
When own boat enters within a specified
distance (circle) from it’s waypoint or route
point, alarm sounds.

52
 Anchor watch alarm
When own boat drifts beyond specified distance
(circle) from it’s waypoint or route point, alarm
sounds.

Off course alarm:

When own boat strays out of a specified
distance from a straight line (course line) which
is connected from it’s starting point to waypoint
or route point, alarm sounds.

1 Select [5.ALARM] on menu.

2 Set each item of [1.ARR/ANCHOR ALARM]

[2.OFF COURSE ALARM]. ( page 57)
Alarm marker
Alarm marker is displayed when waypoint navigation or route navigation is set within
a circle with specified distance from a waypoint or route point and arrival or anchor
alarm is set at the same time.
Course line
Course line is a straight line (fixed) which is connected from own boat to it’s waypoint
when waypoint navigation is set. When power is OFF, it is canceled.

OWN BOAT’S VECTOR AND COLOR OF OWN BOAT’S MARK

Own boat’s vector and color of own boat’s mark

Own boat’s vector

It indicates own boat’s course. But it does not
indicate bow’s direction.
Color of own boat’s vector is same as own boat’s
mark’s.
Select [6.READOUT SETTING] [3.OWN BOAT
1 READOUT] [2.OWN BOAT VECTOR] on
menu.

2 Set item of [2.OWN BOAT VECTOR].

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.
Please refer to [OPERATION OF FISH FINDER]( page 79, 80) for Water temp. alarm,
Fish alarm and Depth alarm.

53
TO SET READOUT ACCURACY OF EACH INFORMATION

To set readout accuracy of each information

You can change readout accuracy of position,

boat speed, distance, bearing and etc. ( page
66)
Example: Change of bearing readout accuracy

CENTER key
1 Select [6.READOUT SETTING] [5.DISPLAY
LETTERS] [4.BEARING UNIT].

2 Select and designate readout accuracy with

of CENTER key.
1/1accuracy 1/10accuracy

TO CHANGE SIZE, COLOR AND ETC. OF CHARACTERS

To change size, color and etc. of characters

You can change attribute (size and color) of

informational characters (information like
latitude, longitude, etc.)
Example: Change the attribute of character
relating to own boat
1 Select [6.READOUT SETTING] 5.DISPLAY
CENTER key LETTERS [5.OWN BOAT LETTER]
[1.LAT/LON LETTER] on menu.
Select and designate size of character (large,
2 medium, small, OFF) with of [CENTER]
key.
When OFF is selected, character is not
indicated.
You can set [Cursor character], [Waypoint
character] besides [Own boat character]. ( page
66)

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

54
TO SHOW OWN BOAT POSITION WITH TIME
DIFFERENCE OF LORAN C
To show with time difference of Loran C

Loran C
Loran C (Long Range Navigation) is hyperbolic navigation system using long wave
band. Theory of “locus of point that difference of arrival time of signal transmitted
from two stations is constant value conforms to hyperbola focused at those stations.
This hyperbola is called “Line of position”(LOP) and intersection point of more than
two LOPs will be position of observatory.
One chain comprises of one main station and 2~4 slave stations and it called Loran C
chain.
This unit enables you to set correction of Loran C chain, two slave stations and each
slave station. It can indicate own boat’s position in LOP of Loran C.

1 Select [6.READOUT SETTING] [2.POSITION

READOUT] [2.LORAN C SET UP].

2 Set each item of [2.LORAN C SETUP]. ( page

65)

Select [6.READOUT SETTING] [2.POSITION

3 READOUT] [1.LAT/LON LORAN C] on menu.

When you set [1.LAT/LON LORAN C] to

4 LORAN C, own boat’s position will be indicated
as time difference of Loran C.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

55
TO SET DGPS BEACON RECEIVER

To set DGPS beacon receiver (for only DGPS model)

DGPS This system makes GPS accuracy improve using electric wave transmitted
from beacon station (medium frequency band beacon signal).

1 Select [8.OTHERS] [4.GPS SETTING]

[2.BEACON SETTING] on menu.

2 Set each items of [2.BECON SETTING].

( page 60)
When [1.FREQ] of [2.BEACON SETTING]
is set to “AUTO”, both frequency and baurate
are set automatically. (In case of “MANUAL”,
setting of frequency and baurate are needed.)

56
TO ALLOCATE FISH FINDER KEY TO PLOTTER KEY

To allocate fish finder key to plotter key

When display is plotter mode, you can allocate fish finder key on remote to plotter
key (Remote is option.)

1 Select [8.OTHERS]
MENU]
[8.INITIAL]
[5.F/F KEY AT PL] on menu.
[7.SPECIAL

Select item.
2 INVALID This function is invalid.
USED Fish finder key is allocated to
In case of HE-7301 plotter key.
Fish finder key (Event mark key)
When display is plotter mode, it is effective.

When it is allocated to plotter key, fish finder

keys on below figure can be used for plotter key.

In case of HE-7302
Event mark key

TO ADJUST CONTRAST
To adjust contrast

1 Select [8.OTHERS] [8.INITIAL] [8.SPECIAL

MENU] [6.CONTRAST] on menu.

Adjust contrast with of CENTER key.

CENTER key 2 Contrast is varied in 9 ranks from –4 to +4.
Please adjust at visible value.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu

57
LIST OF PLOTTER MENU AND MEANING

Menu Item Meaning of setting

1. Wake

1. WAKE ON Show (record) wake

MEMORY OFF Not show wake (interrupt to record)

2. WAKE Set color of wake which is being recorded.

COLOR Selected color is indicated. Red

3. DISPLAY 1. Red Select whether “indicated or not indicated” on each

COLOR color for recorded wakes. ALL
7. Blue ON indicated OFF not indicated

8. ALL Indicate all colors (including wake color)

9. NO. EXC. WAKES Indicate wake color only.

4. ERASING 1. ERASE BY COLOR Erase all wakes of which color is designated.
WAKE 2. ERASE ALL Erase all wakes.
3. ERASE BY Set whether wake can be erased by cursor or not.
CURSOR Select with left/right of CENTER key.
ON ERASE OFF NOT ERASE

5. MEMORY Select whether memory interval is done by TIME or

INTERVAL DISTANC. Select with left/right of CENTER key.

6. MEMORY 1. TIME Select the interval of Memory interval which is done by TIME. Select
INTERVAL with left/right of CENTER key. ( page 33) 20 sec.

SETTING

2. DISTANCE Set the interval of Memory interval which is done by DISTANCE. Select
with left/right of CENTER key. ( page 33) 0.05NM(km)

2. Waypoint

1. RECALL When waypoint navigation is set, recall and designate waypoint by entering
WAYPOINT waypoint number.

2. CANCEL Cancel waypoint navigation.

WAYPOINT Same function as [WP RECALL]key +
[CLR] key page 47

3. ERASE 1. ERASE BY COLOR Erase all waypoints of which color is designated.

WAYPOINT 2. ERASE BY SHAPE Erase all waypoint marks of which shape is designated.

3. ERASE ALL Erase all waypoint marks.

4. ERASE BY CURSOR Set whether waypoint mark can be erased by cursor or not.
Select with left/right of CENTER key.
ON ERASE OFF NOT ERASE

5.ERASE BY OWN SHIP Set whether waypoint mark can be erased by own boat or not.
Select with left/right of CENTER key.
ON ERASE OFF NOT ERASE

4. MEMORIZED Set the color to use when you enter waypoint mark.
COLOR Select with up/down of CENTER key PURPLE

5. DISPLAY 1. RED Select whether “indicated or not indicated” on

COLOR each color for recorded waypoint marks.
7. BLUE Select with left/right of CENTER key. ALL
ON INDICATED OFF NOT INDICATED

8. ALL COLORS indicate all colors.

9. NO DISPLAY Not indicate all colors.
6.CHANGE SHAPE Change waypoint mark to other waypoint mark.
7. LIST/EDIT Show the list of information for entered waypoint mark
and change content.
Changable items: Mark number, mark shape, latitude, longitude, comment (name)

* is at factory setting

58
Menu Item Meaning of setting
3. EVENT

MARK 1. ERASE 1. ERASE BY COLOR Erase all event marks of which color is designated.
2. ERASE BY SHAPE Erase all event marks of which shape is designated.
3. ERASE ALL Erase all event marks.
4. ERASE BY Set whether event mark can be erased by cursor or not.
CURSOR Select with left/right of CENTER key.
ON ERASE OFF NOT ERASE

5.ERASE BY OWN SHIP Set whether waypoint mark can be erased by own boat or not.
Select with left/right of CENTER key.
ON ERASE OFF NOT ERASE

2. MEMORIZED Set the color to use when you enter event mark.
COLOR WAKE COLOR

3. DISPLAY 1. RED Select whether “indicated or not indicated” on each color for
COLOR recorded event marks. Select with left/right of CENTER key.
7. BLUE ON INDICATED OFF NOT INDICATED ALL

8. ALL indicate all colors

9. NO DISPLAY Not indicate all colors.
4. CHANGE Select shape of event marks (from 8 kinds).
OF SHAPE

5. LIST/EDIT Show the list of information for entered event mark and
change content.
Changeable items: Mark number, mark shape, latitude, longitude,
comment (name)

4. ROUTE
1. RECALL When route navigation is set, recall and designate route
ROUTE by entering route number.

2.CANCEL ROUTE Cancel route navigation.

3. ERASE 1. ALL Erase all registered routes.
ROUTE 2. ERASE BY NUMBER Designate route number and erase route individually.
4. ENTER ROUTE Register route which will be used for route navigation. ( page 45)

5. ADVANCE Advance intermediate point (course change point) at

WAYPOINT route navigation. ( page 53)

6. RETURN Return intermediate point (course change point) at

WAYPOINT route navigation. ( page 53)

5. ALARM
1.ARR/ANCHOR 1. ALARM SET Designate whether Arrival/Anchor alarm function is used or not.
ALARM OFF not used Arrival/Anchor Alarm
Arrival Use Arrival Alarm
Anchor Use Anchor Alarm
page 55

2. DISTANCE SET Designate effective range (diameter of circle).

(Common for Arrival/Anchor) page 55 0.50NM(km)

2. OFF COURSE 1. ALARM SET Designate whether course off alarm function is used or not.
ALARM OFF NOT USE ON USE
page 55

2. COURSE WIDTH Designate effective width of alarm. page 55

SET 0.50NM(km)

3. TEMP ALARM Alarm sounds within or out of two water temperatures.

(Common for plotter and fish finder) ( Refer to page 79)

4 FISH ALARM Refer to Fish finder function( page 79) (for only HE-7301 )

5. DEPTH ALARM Refer to Fish finder function( page 79) (for only HE-7301 )

5. TIME ALARM
* is at factory setting

59
Menu Item Meaning of setting
6. READOUT SETTING

1. C-MAP 1. DEPTH SETTING 1. DEPTH UNIT Select "M", "Ft" or "Fa"

SETTING 2. SOUNDING LINE ON : Indicate OFF : Not indicate
2. LAT/LON GRID ON : Indicate OFF : Not indicate
3. LIGHT SECTOR ON : Indicate OFF : Not indicate
4. ATTENTION AREA ON : Indicate OFF : Not indicate

5. TRACKS,ROUTE ON : Indicate OFF : Not indicate

6.OTHER OBJECT 1. NAME ON : Indicate OFF : Not indicate
2. TIDE,CURRENT ON : Indicate OFF : Not indicate
3. SEABED TYPE ON : Indicate OFF : Not indicate
4.WRECKS.OBSTN ON : Indicate OFF : Not indicate
5. PORT,SERVICE ON : Indicate OFF : Not indicate
6. ROAD ON : Indicate OFF : Not indicate
7.OTHER 1. NAV-AIDS Select "US","US SMP","INT","INT SMP" or "OFF"
2. MIXING LEVEL ON : Indicate OFF : Not indicate
3. DECLUTTER ON : Indicate OFF : Not indicate
4. MAP BOUNDARIES ON : Indicate OFF : Not indicate
5. AUTO COURSE UP ON : Indicate OFF : Not indicate
6. CENTERING ON : Indicate OFF : Not indicate
7. MOVE DIRECTION Cahnge the direction,when scroll the map by Center key. NEG, POS
8. SEA COLOR Select sea color NORM
9. LAND COLOR Select land color NORM
8. AUTO INFO Select "ON POINT","ON ALL" or "OFF"
2. POSITION 1. LAT/LON, Display method of own boat is set to LAT/LON or
READOUT LORAN C ”LORAN C TIME DIFFERENCE”.

2. LORAN C SETUP 1. CHAIN Set Loran C chain. page 58 5930

2. SLAVE STATION1 Set slave station of Loran C page 58 Y 25

3. SLAVE STATION2 Set slave station of Loran C page 58 Z 38

4.SLA STA 1 CORRET Set slave corrected value for slave station of Loran C page 58 0.00
5.SLA STA 2 CORRET Set slave corrected value for slave station of Loran C page 58 0.00
3.OWN BOAT 1.OWN BOAT MARK Designate type of own boat’s mark.
READOUT

2. OWN BOAT Designate whether own boat’s bearing is indicated or not.

VECTOR OFF Not indicate SHORT Indicate short LONG indicate long

3. WAYPOINT Straight line connected between own boat and waypoint on

LINE route navigation is indicated or not.
OFF Not indicate ON Indicate

4. COURSE Straight line connected between own boat and waypoint is

LINE indicated or not when waypoint navigation is set..
OFF Not indicate ON Indicate

5. DISTANCE Certain radius of area (circle) is set as own boat is center. Set with
MARKER Left/Right of [CENTER] key.
Set range 0 Not indicate 99NM 1.00NM(km)
However, set range (radius) which can be entered is set range Range 20.

6.BOAT MARK COLOR Designate color of own boat mark. Select with left/right of CENTER key. Wh
7.W/LINE COLOR Designate color of waypoint line. Select with left/right of CENTER key. Mag
8.COURSE LINE Designate color of course line. Select with left/right of CENTER key. RED
COLOR

9. DISTANCE Designate color of distance marker. Select with left/right of

MARKER COLOR CENTER key. LIGHT B

* is at factory setting

60
Menu Item Meaning of setting
4. CURSOR 1. CURSOR STYLE Designate cursor shape. Select with left/right of CENTER key. +
READOUT 2.CURSOR COLOR Designate cursor color. Select with left/right of CENTER key. YELL
3.CURSOR LINE Designate whether cursor is shown or not.
Select with left/right of CENTER key
OFF Not indicate ON Indicate

5. DISPLAY 1.LAT/LON UNIT Designate latitude/longitude display accuracy.

LETTER 1/100 Indicate up to 1/100 accuracy
1/1000 Indicate up to 1/1000 accuracy

2. SPEED UNIT Designate boat speed display accuracy.

1/1 Indicate up to 1/1 accuracy 1/10 Indicate up to 1/10

3.DISTANCE UNIT Designate distance display accuracy.

1/1 Indicate up to 1/1 accuracy 1/10 Indicate up to 1/10

4. BEARING UNIT Designate bearing display accuracy.

1/1 Indicate up to 1/1 accuracy 1/10 Indicate up to 1/10

5. OWN BOAT Designate size, color, indicate or not indicate of latitude/

LETTER longitude, boat speed, bearing and measured time.
L, M, S Designate size of character ALL L
Size is M when positioning.
OFF Not indicate COLOR Indicate in designated color ALL WHITE

ALL WHITE (YELLOW WHEN positioning.

6. CURSOR Designate size, color, indicate or not indicate of latitude/

LETTER longitude, boat speed, bearing and measured time.
L, M, S Designate size of character ALL M
OFF Not indicate
COLOR Indicate in designated color ALL YELLOW

7. WAYPOINT Designate size, color, indicate or not indicate of latitude/

LETTER longitude, boat speed, bearing and measured time.
L, M, S Designate size of character ALL M
OFF Not indicate
COLOR Indicate in designated color ALL MGENTA

6. CLOCK ON : Indicate OFF : Not indicate

7. FIND 1.PORT SERVICE List of facilities (Max. 8 ports) near to own boat is indicated.
2.PORT List of ports (Max. 8 ports) near to own boat is indicated.

3.TIDE STATION List of tide stations (Max. 8 ports) near to own boat is indicated.
4.WRECKS List of wrecks (Max. 8 ports) near to own boat is indicated.
5.OCSTRUCTIONS List of obstructions (Max. 8 ports) near to own boat is indicated.
8. OTHERS
1. DRAW 1. START DRAW Draw line. Same as [LINE] key. ( page 48)
LINE 2. LINE COLOR Designate line color. Select with left/right of CENTER key.
3. LINE Designate whether line is indicated or not.
READOUT OFF Not indicate ON Indicate

4. ERASE 1. ERASE BY COLOR Erase line.

LINE 2. ERASE ALL Erase all lines of which color is designated.
3. ERASE BY CURSOR Erase all lines.
Set whether line can be erased by cursor or not.
Select with left/right of CENTER key.
ON ERASE OFF NOT ERASE

5. DRAW MODE CURSOR:set the end of line by cursor

POSITION:set the end of line by position

* is at factory setting

61
Menu Item Meaning of setting
2. MEMORY 1. INITIALIZE Initialize memory card.

CARD MEMORY CARD

2. STORE FROM Store information set in main unit into memory card.
UNIT TO CARD ( page 30)

3. STORE FROM Reading information stored in memory card into main

CARD TO UNIT unit. page 30

3. UNIT 1.DISTANCE Select NM or km .

SWITCH 2. TEMP. UNIT Select or F .
4. GPS 1. SMOOTHING When unevenness arises in measured value due to HDOP or S/A,
SETTING measured value is averaged and wake, etc. is indicated smoothly.
If set value is strengthened (weak strong), change of latitude/
longitude display will be displayed when boat moves heavily.

2. BEACON Set beacon receiver.

SETTING 1. FREQ. AUTO Search for beacon station automatically and capture
optimum beacon station.
Set baurate as well as receiving frequency.
MANUAL: Set frequency and bow rate manually.

2. BAURATE Set baurate when it is set manually. 200

Select with left/right of [CENTER] key.

3. FREQ AT Designate frequency when it is set manually. 288.0

MANUAL SET Select with left/right of [CENTER] key.

3. INITIALIZE GPS Initialize GPS.

5.CORRECTION 1. LOCAL TIME Correct local time.
CORRECTION Select with left/right of [CENTER] key.9:00

2. GPS AZIMUTH 1.GPS AZIMUTH Select GPS Azimuth.

Real Azimuth Magnetic Azimuth

2.MAG/AZIMUTH Set magnetic azimuth. It is effective when upper

DEVIATION item is set to “Magnetic Azimuth.” W5.4

3. BOAT POSI 1. BOAT POSI Designate whether own boat position is corrected or not.
CORRECT CORRECT OFF not correct ON correct

2. LAT CORRECT Designate corrected value of latitude. Select left/right of {CENTER} key.0.000
3. LON CORRECT Designate corrected value of longitude. Select left/right of {CENTER} key.0.000
4.CORRECT VALUE TO 0 Set corrected value of above 2 & 3 to 0.
5. MOVE TO C/POINT Move own boat mark to cursor position.

4. TEMP Designate corrected value of water temp. Select with left/

CORRECT right of [CENTER] key. (Water temp. sensor is option.) 0.0

6. EXT Set NMEA output.

TERMINAL OFF Not output ON output

7. INITIAL 1. INITIAL MENU Initialize all contents of which are set on menu.

2. INIT CORR VALUE Initialize each corrected value only.

3. INITIAL Initialize all stored contents like event mark and
MEMORY DATA waypoint mark.

4. INTIAL ALL Initialize all above 1~3. In order to execute initialization, turn the
Power OFF once and then turn the Power ON.

5. SIMULATION Select whether GPS simulation mode/fish finder simulation

mode is shown or not.
OFF Not show
FIX Own boat is fixed.
MOVE Own boat moves. page 19

* is at factory setting

62
Menu Item Meaning of setting
6. SPECIAL 1.WAYPOINT When you put the Power OFF and put the Power ON again while waypoint is set,

MENU RECALL/MEMORY select whether the waypoint setting is stored or not. OFF

2.F/F OPERATION OFF To save power consumption, stop fish finder operation
AT PL at plotter display mode. ( page 18)
ON Fish finder operates at PL display mode.
HE-7301II, HE-1501)

3.WAYPOINT Select whether waypoint mark comment entered on menu 2. WAYPOINT

COMMENT 7.LIST/EDIT is indicated on map or not. ON

4.EVENT MARK Select whether event mark comment entered on menu 3.EVENT MARK
COMMENT 5, LIST/EDIT is indicated on map or not. ON

5.F/F/ KEY AT PL Allocate fish finder key on remote to plotter key when density is plotter mode.
( page 60) (HE-7301II, HE-1501)

INVALID USE

6.CONTRAST SET Adjust contrast of fish finder display. Adjust to visible.

7. SPECIAL 1.USER KEY Allocate USER key for some settings
MENU 2 11-LC, CMAP ON-OFF, SPOT S., COLOR TONE

2.COLOR TONE DAY:Normal brightness NIGHT:Less brightness

3.WPT SAVE MODE Select the way for numbering of WPT, when pressing WPT key.
AUTO:Numbering from a low number by automatically
NUMBERING : After pressing WPT key, prefered WPT number can be selected

4.WAKE WIDTH NORM : Normal WIDE : Wider than normal

5.REMOTE TYPE Select a remote type from HE-6901 and HE-7501,
6.7501 ? KEY On the remote for HE-7501, allocate ? key for ? as event mark or spot sounding
? MARK : ? as event mark SPOT.S : Spot sounding is indicated by ? key

7.WAKE ERASE AREA Select the area to recognize the wake memory point for erasing wake.
N:Normal W:Wide

8.WAKE MEMORY POINT Indicate wake memory point OFF, ON

9.EVENT INFO.BOX Indicate information window of event Mark OFF,ON
* is at factory setting

63
1.ADDITIONAL C-CARDS ................................................................................. 66

2. MAP SETTING................................................................................................ 67
1. Set the depth unit. ............................................................................................. 67
2. Set if DEPTH LINE is displayed or not. ........................................................... 67
3. Set if LAT/LON GRID is shown or not. ............................................................. 67
4. Set if LIGHT SECTOR is shown or not............................................................. 68
5. Set if Attention Areas is shown or not............................................................... 68
6. Set if TRACKS, ROUTE is shown or not. ......................................................... 69
7. Set if NAME is shown or not. ............................................................................ 69
8. Set if TIDES,CURRENTS are shown or not. .................................................... 69
9. Set if SEABED TYPE is shown or not............................................................... 70
10. Set if WRECKS, Obstruction is shown or not................................................... 70
11. Set if PORT and PORT SERVICES are shown or not. ..................................... 70
12. Set Navigational Aids. ....................................................................................... 71
13. Set if MIXING LEVEL is set ON/OFF. ............................................................. 71
14. Set if DECLUTTER is ON/OFF......................................................................... 72
15. Set if CHART BOUNDARIES is ON/OFF......................................................... 72
16. Set if AUTO−COURSE Up is ON/OFF.............................................................. 73
17. Set if CENTERING function is ON/OFF........................................................... 73
18. Set MOVE DIRECTION.................................................................................... 73

3. GETTING AUTOMATIC INFO ...................................................................... 74

4. FIND FUNCTION........................................................................................... 76
1. Finding Port....................................................................................................... 76
2. Finding Port Services ........................................................................................ 77
3. Finding tide Stations ......................................................................................... 77
4. Finding Wrecks .................................................................................................. 78
5. Finding Obstructions ......................................................................................... 78

64
1.ADDITIONAL C-CARDS ................................................................................. 66

2. MAP SETTING ................................................................................................ 67

1. Set the depth unit...............................................................................................67
2. Set if DEPTH LINE is displayed or not. ............................................................67
3. Set if LAT/LON GRID is shown or not...............................................................67
4. Set if LIGHT SECTOR is shown or not. ............................................................68
5. Set if Attention Areas is shown or not. ..............................................................68
6. Set if TRACKS, ROUTE is shown or not. ..........................................................69
7. Set if NAME is shown or not..............................................................................69
8. Set if TIDES,CURRENTS are shown or not......................................................69
9. Set if SEABED TYPE is shown or not. ..............................................................70
10. Set if WRECKS, Obstruction is shown or not....................................................70
11. Set if PORT and PORT SERVICES are shown or not.......................................70
12. Set Navigational Aids.........................................................................................71
13. Set if MIXING LEVEL is set ON/OFF...............................................................71
14. Set if DECLUTTER is ON/OFF. ........................................................................72
15. Set if CHART BOUNDARIES is ON/OFF. ........................................................72
16. Set if AUTO−COURSE Up is ON/OFF..............................................................73
17. Set if CENTERING function is ON/OFF. ..........................................................73
18. Set MOVE DIRECTION.....................................................................................73

3. GETTING AUTOMATIC INFO ...................................................................... 74

4. FIND FUNCTION ........................................................................................... 76

1. Finding Port........................................................................................................76
2. Finding Port Services .........................................................................................77
3. Finding tide Stations..........................................................................................77
4. Finding Wrecks...................................................................................................78
5. Finding Obstructions..........................................................................................78

64
 IMPORTANT
INFORMATIONS SHOWN ON THE SCREEN OF THIS UNIT SHOULD NOT BE

RELIED ON FOR NAVIGATION JUDEGMENT.

OFFICIAL MARINE CHARTS SHOULD BE USED FOR JUDGEMENT.

NT+, MAX data are not to

be used a replacement for
official paper chart.

65
1. ADDITIONAL C-CARDS

●Up to two C-CARDs can be inserted.

Card slot cover

Loosen screw. Take off card slot

cover.

Insert the card.

66
2. MAP SETTING
Chart presentation can be customized according to user’s demand.
Menu related to MAP SETTING is set within;
→[6:READOUT SETTING→[1:C-MAP SETTING]

1. Set the depth unit.

[ m, Ft, Fa ] The default setting is "m".
Depth unit to be used is changed with DEPTH LINE and SPOT SOUNDING.

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[1:DEPTH SETTING]→[1:DEPTH UNIT]
and then select unit turning the lever left or right.

2. Set if DEPTH LINE is displayed or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[1:DEPTH,SETTING]→[2:SOUNDINGS LINES]
and then select ON or OFF turning the lever left or right.

3. Set if LAT/LON GRID is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[2:LAT/LON GRID]
and then select ON or OFF turning the lever left or right.

67
4. Set if LIGHT SECTOR is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[3:LIGHT SECTOR]
and then select ON or OFF turning the lever left or right.
LIGHT SECTOR

Note)
In case NAV-AIDS is set to INT Simple or US simple, LIGHT SECTOR is not shown even if
LIGHT SECTOR is set to ON.

5. Set if Attention Areas is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[4:ATTENTION AREA]
and then select ON or OFF turning the lever left or right.

68
6. Set if TRACKS, ROUTE is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[5:TRACKS,ROUTES]
and then select ON or OFF turning the lever left or right.

7. Set if NAME is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[6:OTHER OBJECTS]→[1:NAME]
and then select ON or OFF turning the lever left or right.

8. Set if TIDES,CURRENTS are shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[6:OTHER OBJECTS]→[2: TIDES, CURRENTS]
and then select ON or OFF turning the lever left or right.

69
9. Set if SEABED TYPE is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[6:OTHER OBJECTS]→[3:SEABED TYPE]
and then select ON or OFF turning the lever left or right.

10. Set if WRECKS, Obstruction is shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[6:OTHER OBJECTS]→[4:WRECKS,OBSTN]
and then select ON or OFF turning the lever left or right.

11. Set if PORT and PORT SERVICES are shown or not.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[6:OTHER OBJECTS]→[5:PORT,SERVICES]
and then select ON or OFF turning the lever left or right.

70
12. Set Navigational Aids.
[ OFF US, US SMP INT ,INT SMP ] The default setting is "US".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[1:NAV-AIDS]
and then set turning the lever left or right.

When selected it affects Light,Signals,Buoys & Beacons display.

US : Draw Navigational Aids using NOAA symbology. All componects of Complex
Objects are shown.
US SMP : Shows Complex Object with one icon only. Non-complex Navigational Aids are
shown using NOAA symbology.
INT : Draws Navigational Aids using international symbology.
All components of Complex Objects are shown.
INT SMP : Shows Complex Object with one icon only.
Non-complex Navigational Aids are shown using international symbology.
OFF : Light, Signals, Buoys & Beacons are no longer display on the charts.

13. Set if MIXING LEVEL is set ON/OFF.

[ ON, OFF ] The default setting is "ON".
Select menu item with;
→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[2:MIXING LEVEL]
and then set ON or OFF turning the lever left or right.
When MIXING LEVEL is set to ON,
in case that whole screen can not be drawn at present zoom
level as there is no detailed map data for whole screen, area
without detailed map data is drawn in rough.
Area drawn with rough map is shown in black dot pattern.
When it is set to OFF, area without detailed map data is not
shown.

MIX LEVEL ON MIX LEVEL OFF

71
14. Set if DECLUTTER is ON/OFF.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[3:DECLUTTER]
and then select ON or OFF turning the lever left or right.

When it is set to ON, overlapped text (for example, place

name, etc.) is deleted. It results in making letter easy to read.

15. Set if CHART BOUNDARIES is ON/OFF.

[ ON, OFF ] The default setting is "ON".

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[4:CHART BOUNDARIES]
and then select ON or OFF turning the lever left or right.

When it is set to ON, area having detailed map data is shown

by surrounding with line like TTTT.

T-LINE

72
16. Set if AUTO−COURSE Up is ON/OFF.
[ ON, OFF ] The default setting is "OFF".
Select menu item with;
→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[5:AUTO-COURSE UP]
and then select ON or OFF turning the lever left or right.

When AUTO−COURSE Up is set to ON, if boat turned off

more than ±15° from just top of screen, with (couse up)
key on remote pressed, map is redrawn so that the boat
forwards just upper of screen automatically.

17. Set if CENTERING function is ON/OFF.

[ ON, OFF ] The default setting is "ON".
Select menu item with;
→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[6:CENTERRING]
and then select ON or OFF turning the lever left or right.

When CENTERING is set to ON, map scrolls so that own

boat is always at center of screen.
When it is set to OFF, map does not move and own boat
moves on map.
When own boat moves closed to edge of screen, map is
redrawn and own boat returns to vicinity of center.
Note)
If you move map by indicating the cursor or up/down key, above functions are canceled.
Even if own boat moves, map does not scroll or can not be redrawn.
In this case, by pushing up/down key, own boat returns to center. And then map scrolls or
can be redrawn.

18. Set MOVE DIRECTION.

[ NEG, POS ] The default setting is "NEG".

When up/down key is turned, direction to scroll map can be

changed.
Select menu item with;
→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[7:OTHER SETTING]→[7:MOVE DIRECTION]
and then select NEG or POS turning the lever left or right.

73
3. GETTING AUTOMATIC INFO
When cursor is overlaid on object displayed on map, you can indicate name, etc. of the object
on the screen.
Information of displayed
Cursor object is indicated.

Select menu item with;

→[6:READOUT SETTING]→[1:C-MAP SETTING]→
[8:AUTO INFO]
and then select OFF or ON POINT,ON ALL turning the lever
left or right.

ON POINT: When there is cursor on POINT(PORT SERVICES, TIDE, LIGHT, WRECKS,

ROCKS BUOYS,BEACONS, Obstructions, Land Marks, etc.), their AUTO
INFO is indicated on the screen.
ON ALL : AUTO INFO of line or area besides ON POINT is indicated.
OFF : AUTO INFO is not indicated.

74
When AUTO info is indicated, all available information about graphic points under the cursor
with pressing key.
Info Tree is indicated on the upper of page and detailed information is indicated on the lower of
page.
You can select cursor on Info Tree turning up/down key up/downward. Detailed information
about selected Object is indicated on the lower of page.
When information can not be indicated completely on the lower of page, you can scroll the screen
with (zoom out) key or (cursor ON/OFF) key.

In case selected Object is TIDE, tidal graph is shown with pressing key.
By pressing key, it returns to normal display.

75
4. FIND FUNCTION
The chartplotter allows finding Port, Port, Services, Tide Station, Wrecks and Obstructions.

1. Finding Port

List of ports (maximum 8 ports) near to own boat (near to cursor when cursor is shown) is
indicated.

List is indicated with;

→[7:FIND]→[1:PORT]→

When list is indicated, port is selected with turning up/down

key. With pressing key, map is redrawn so that selected

port is shown at center of screen.

76
2. Finding Port Services

List of facilities (for example, Hospital, Sailmarker, Bank, etc.) near to own boat (near to
cursor when cursor is shown) is indicated.

Icon of selectable services is indicated with;

→[7:FIND]→[2:PORT SERVICES ]→ or [↑→↓←]

When you select service with up/down key and press

key, list (maximum 8 services) is indicated.
When you select port with up/down key and press key
while list is indicated, map is redrawn so that selected port is
shown at the center of screen.

3. Finding tide Stations

List of tide Stations near to own boat (near to cursor when cursor is shown) is indicated
(maximum 8 stations).

List is indicated with;

→[7:FIND]→[3:TIDE STATION]→

When you select tide Stations with up/down key and press
key while list is indicated, tidal graph is shown. With
pressing key again, map is redrawn so that selected tide
Stations is shown at the center of screen.

77
4. Finding Wrecks

List of Wrecks (maximum 8 wrecks) near to own boat (near to cursor when cursor is shown)
is indicated.

List is indicated with;

→[7:FIND]→[4:WRECKS]→

When you select port with up/down key and press key
while list is indicated, map is redrawn so that selected
Wrecks is shown at the center of screen.

5. Finding Obstructions

List of Obstructions (maximum 8 obstructions) near to own boat (near to cursor when
cursor is shown) is indicated.

List is indicated with;

→[7:FIND]→[5:OBSTRUCTION]→

When you select port with up/down key and press key
while list is indicated, map is redrawn so that selected
Obstructions is shown at the center of screen.

78
OPERATION OF FISH FINDER

79
 HOW TO SEE THE DISPLAY OF FISH FINDER MODE

Example of fish finder display (in case of showing fish finder display only)

Differential Mark Frequency Fish School

Lat
Own Boat
position Lon

Gain Bar

Bottom

High Frequency Image

Low Frequency
Image
Depth (Displayed Unit)

2nd Reflection Water Depth Depth Unit

Frequency indication Temp.

When unit is dual frequency version: L: Low Freq. H: High Freq. However, in
case of parallel display of dual frequency, position where “Frequency” is
indicated changes. (Refer to “TO SHOW DUAL FREQUENCY MODE” (
page 81))
600W-200kHz, 1.2kW-200kHz or 3.0kW-200kHz does not have dual frequency
function.

Water Temp. Indication

Water temp. sensor (option) is indicated when optional water temp. sensor is
connected.

Differential mark is indicated when it is connected with differential GPS. only

DGPS

80
TO SET THE DEPTH (DISPLAY RANGE)

Depth (Display Range)

Depth (Display Range)

This sets the depth (display range: how deep from the surface of water is displayed).
Depth range you can set differs depends on frequency.

1 To decrease the depth (display range)

Each time when you press key, the depth
decreases.

To increase the depth (display range)

Each time when you press key, the depth
increases.
In case of remote
1 To decrease the depth (display range)
Each time when you press RANGE (S) key, the
depth decreases.

To increase the depth (display range)

Each time when you press RANGE (D) key, the
depth increases

81
TO ADJUST SENSITIVITY

In case of single frequency display

This describes operation for single frequency display.

You can change sensitivity with GAIN 1 key or GAIN 2 key.

Single frequency display or dual frequency display is selected on menu. ( page 81)
When the unit is delivered from factory, dual frequency display mode is set.
[Gain]
This adjusts the sensitivity to distinguish the
bottom or fish school easily. 32 steps of
sensitivity from 0 to 31 is displayed in bar.
Optimum sensitivity is that second reflection
from bottom is barely displayed.
[Second reflection]
First received echo reflected from bottom is
called the first reflection. It’s first reflection
reflected from the surface of water goes toward
the bottom

GAIN1 key 1 To decrease sensitivity

Each time when you press key, gain bar
becomes short and sensitivity decreases.

To increases sensitivity
Each time when you press key, gain bar
becomes long and sensitivity increases.

82
 In case of remote
1 To decrease sensitivity
Each time when you GAIN1(L) key, gain bar
becomes short and sensitivity decreases.

To increases sensitivity
Each time when you pressGAIN1(H) key, gain
bar becomes long and sensitivity increases.

In case of dual frequency display

In case of dual frequency display, GAIN1 key is for right side of screen and GAIN2 is
for left side of screen. 600W-200kHz 1.2kW-200kHz or 3.0kW-200kHz does not have
dual frequency function. Adjust sensitivity on left side of screen with
1 GAIN2 key.
To decrease sensitivity
Each time when you press key, gain bar
becomes short and sensitivity decreases.
To increase sensitivity
Each time when you press key, gain bar
becomes long and sensitivity increases.
Adjust sensitivity on right side of screen with
2 GAIN1 key.
To decrease sensitivity
Each time when you press key, gain bar
becomes short and sensitivity decreases.
GAUN2 key GAIN1 key To increase sensitivity
Each time when you press key, gain bar
becomes long and sensitivity increases.

In case of remote
Adjust sensitivity on left side of screen with
1 GAIN2 key.
To decrease sensitivity
Each time when you press GAIN2(L)key, gain
bar becomes short and sensitivity decreases.
To increase sensitivity
Each time when you press GAIN2(H) key, gain
bar becomes long and sensitivity increases.
Adjust sensitivity on right side of screen with
2 GAIN1 key.
To decrease sensitivity
Each time when you press GAIN2(L) key, gain
bar becomes short and sensitivity decreases.
To increase sensitivity
Each time when you press GAIN2(H) key, gain
bar becomes long and sensitivity increases

83
TO SET SHIFT (DISPLAY RANGE SHIFT)

Shift (Shift of display range)

Shift (Shift of display range)

You can shift the initial displayed depth
downward. For example, when you shift 10m
downward at 0-8m depth range, initial display
depth becomes to 10m and display range
becomes to 10-18m.

Even if image you want to see is small, it is

enlarged by setting the depth (display range) to
shallow range when shift is selected.
SHIFT key

To shift to shallow depth

1 Each time when you press key, the display
range becomes shallow.

To shift to deep depth

Each time when you press key, the display
range becomes deep.

In case of remote
1 To shift to shallow depth
Each time when you press SHIFT (S) key, the
display range becomes shallow.

To shift to deep depth

Each time when you press SHIFT (D) key, the
display
range becomes deep.

84
TO MOVE EXPANDED AREA

To move expanded area

You can move and see expanded area to top or bottom of display.
You can not operate {ZOOM} key except for manual expansion mode.
Expansion rate is selected among 2 times, 4 times and 8 times. (Expansion rate
page 78)
When the unit is delivered from factory, it is set to manual expansion mode and
expansion rate is set to 2 times.
ZOOM key
Select [9.SOUNDER] [5.EXPANSION]
1 [1.EXP.MODE] on menu. page78, 88

Set [1.EXP.MODE] to MANUAL EXPANSION.

2
Move expanded area up/downward with [ZOOM]
3 key.
Each time when you press key, it
approaches to sea surface.
Each time you press key, it approaches to
sea bottom.

In case of remote
Select [9.SOUNDER] [5.EXPANSION]
1 [1.EXP.MODE] on menu. page78, 88

2 Set [1.EXP.MODE] to MANUAL EXPANSION.

Move expanded area up/downward with [ZOOM]
key.
3 Each time when you press ZOOM (S) key, it
approaches to sea surface.
Each time you press ZOOM (D) key, it
approaches to sea bottom.

To cancel Expansion display, set [1. EXP.MODE]

to OFF. (page78, 88

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

85
TO SHOW/SET THE EXPANSION MODE

Expansion Mode

Expanded display
Expanded display is shown on the left half of screen.
In case of dual frequency, frequency’s expanded display shown on right side of screen is
displayed on the left side of screen.
ZOOM key
1 Select [9.SOUNDER] [5.EXPANSION]
[1.EXP.MODE] on menu.
Select among OFF, BOTTOM LOCK, AUTO
2 EXPANSION or MANUAL EXPANSION.
OFF Cancel expanded display and return
to normal display.
BOTTOM LOCK Bottom contour is
indicated as a straight line and
expansion view of certain area from
it’s contour is shown.
AUTO EXPANSION Expanded display up or
down in center of bottom.
MANUAL EXPANSION Expanded
display up or down in the center of
optional position. You can move
expanded area with [ZOOM] key as
you wish.
Displayed range varies depending on “Expansion Rate”.

Expansion Rate

Expansion Rate
Expansion rate for expanded area is set to 2 times/4 times/8 times.

1 Select [9.SOUNDER]
[2.EXP.RATE] on menu.
[5.EXPANSION]

2 Select from 2 4 or 8.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

86
TO SET WATER TEMP. ALARM

Water Temp. Alarm

Water Temp. Alarm

Alarm goes off within or out of two water temperatures (TEMP SET 1, TEMP SET 2).
Optional water temp. sensor is required for this function.

1 Select [5.ALARM] [3.TEMP ALARM]

[1.ALARM SET] on menu.
[1.ALARM SET] is established.
2 IN RANGE Alarm goes off when it is within two
water temperatures and water temp.
readout flashes.
OUT RANGE Alarm goes off when it is
out of two water temperatures and
water temp. readout flashes.
OFF Water temp. alarm is canceled.
3
Select [5.ALARM] [3.TEMP.ALARM]
[2.TEMP SET 1], [3.TEMP SET 2].

TO SET FISH ALARM

Fish Alarm
Fish Alarm
When the response to be supposed fish school is displayed, alarm goes off.

1 Select [5.ALARM] [4.FISH ALARM]

[1.ALARM SET] on menu.
Establish [1.ALARM SET].
2 S Sensitivity increases to catch the response
from small fish school. (Also catch the
response from large fish school.)
L To catch the response from large fish
school only.
OFF Fish alarm is canceled.
Note It may catch the response from other objects than fish depending on condition.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu
Please refer to [OPERATION OF PLOTTER] ( page 55) for ARRIVAL/ANCHOR/OFF
COURSE alarm.

87
TO SET DEPTH ALARM

Depth Alarm
Depth Alarm
Alarm goes off within or out of two depths (DEPTH SET 1, DEPTH SET 2).

1 Select [5.ALARM]
[1.ALARM SET] on menu.
[5.DEPTH ALARM]

[1.ALARM SET] is established.

2 IN RANGE Alarm goes off when it is within two
depths and depth readout flashes.
OUT RANGE Alarm goes off when it is
out of two depths and depth readout
flashes.
OFF Depth alarm is canceled.

3 Select DEPTH SET 1 or DEPTH SET 2.

TO SET CORRECTION OF WATER TEMP.

Correction of Water Temp.

When water temp. readout always differs from actual water temp. at constant value,
it corrects error of water temp.
1 Select [8.OTHERS]
[5.TEMP CORRECT]
[6.CORRECTION]
[1.TEMP CORRECT] on
menu.
2 Establish [1.TEMP CORRECT].

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

88
 TO SHOW DUAL FREQUENCY DISPLAY

Change of display
Following dual frequency display can be selected. 600W-200kHz, 1.2kW-200kHz or
3.0kW-200kHz does not have dual Select [9.SOUNDER] [1.DISPLAY] on menu.
frequency function. Establish [1.DISPLAY].
1 1 LOW Low frequency image is displayed on
whole screen.
2 HIGH High frequency image is displayed
2 on whole screen.
3 LOW HIGH Low frequency image is
displayed on the left half of screen and high frequen-
cy image is displayed on the right half of screen.
In case of 4 HIGH LOW Low frequency image is
displayed on the left half of screen and high frequen-
cy image is displayed on the right half of screen.
In case of selecting 3 or 4, LOW: low frequency and HIGH: high
frequency are shown on the screen.

TO SET SWEEPING SPEED

Sweeping Speed
Sweeping Speed
On fish finder, the newest display (display just under the boat) is shown on the right edge of screen.
At the same time previous display moves leftward. Display of fish finder is formed by repeating such
movement. Sweep speed is speed that display forwards. Display expands or reduces horizontally by
changing the sweeping speed.

Relation of sounding rates and sweeping speed

5 sweeping speed can be selected on menu. Ratio of sweeping speed vs. sounding rates at each
speed is shown on the below table.

1 Select [9.SOUNDER] [2.SWEEP SPEED] on

menu.

2 Establish [2.SWEEP SPEED].

5 steps 1/1, 1/2, 1/4, 1/8

”Mark” of sweeping speed is indicated only

on fish finder display.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

89
TO SET AUTO RANGE (Automatic Range Control)

Auto Range
Depth range is automatically changed so that the sea bottom is always shown on the
optimum position of screen (lower half area).

1 Select [9.SOUNDER]
menu.
[3.AUTO RANGE] on

2 Set [3.AUTO RANGE] to RANGE.

TO SET AUTO SHIFT (Automatic Display Range Shift)

Auto Shift
Displayed range is automatically changed (shifted) so that sea bottom is always shown
on the optimum position of screen (lower half area).

1 Select [9.SOUNDER] [3.AUTO RANGE] on

menu.

2 Set [3.AUTO RANGE] to SHIFT.

TO SET AUTO GAIN (Automatic Sensitivity Control)

Auto Gain
Sensitivity is automatically adjusted so that response from sea bottom is even.

1 Select [9.SOUNDER] [4.AUTO GAIN] on

menu.
Establish [4. AUTO GAIN].
2 LOW Sensitivity decreases. When you judge status
of bottom, it helps you to confirm second or third
reflection.
HIGH Sensitivity increases. It helps you to detect
weak object like bait fish, etc.
OFF Cancel Auto Gain function.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

90
TO SET A-MODE

A-Mode
It is displayed on the right edge of screen (between fish finder display and depth
calibration) and it’s width changes according to strength of reflected signal.
Strong response is indicated thick and weak signal is indicated thin.

1 Select [9.SOUNDER] [6.A-MODE] on menu.

Establish [6.A-MODE].
2 ON A-Mode is indicated.
OFF A-Mode is not indicated.

TO SET BACKGROUND COLOR

Background Color
Reflected echo is indicated in different color according to it’s strength. Visual image of
display differs from surrounding brightness. It becomes easy to see the display by
selecting the background color among four colors.
Select [9.SOUNDER] [7.COLOR SET]
1 [1.BACK COLOR] on menu

Set [1.BACK COLOR].

2 Black, Blue, White, Dark Blue

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

91
TO SET COLOR CONFIGURATION

Color Configuration
Reflected signal of sound wave is converted into 16 ranks of digital signal according to
the strength of response. 7 ranks of color except background color is arranged and it
is called Color Configuration.
As image of fish finder is displayed in color by this color configuration, you can know
the strength of response by displayed color. As display of response varies by changing
color configuration, it enables to display defined color specially.

1 Select [9.SOUNDER] [7.COLOR SET]

[2.COLOR CONFIG.] on menu.

2 Set [2.COLOR CONFIG.] 7 ranks 0 6

TO SET CLUTTER

Clutter
Fish school or bottom is displayed while the strength of reflected echo is corresponded
with pre-set color configuration.
As this can delete colors in turn from color of weakest echo, it will be able to
distinguish this school easily by deleting weak echoes like plankton, stain in the water
or etc.

1 Select [9.SOUNDER]
CLUTTER] on menu
7. COLOR SET [3.

2 Set [3. CLUTTER]. 13 ranks 0 12

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

92
TO CHANGE UNIT OF DEPTH READOUT

Depth Unit
“Meters”, “Fathoms”, “Feet” or “Brazas” is selected.

1 Select [9.SOUNDER]
UNIT] on menu.
[8.OTHERS] [1.DEPTH

Set [1.DEPTH UNIT].

2 (Meters, Fathoms, Feet, Brazas)

TO SET SCALE LINE

Scale Line
Horizontal lines are shown at the position of depth scale on the screen.

1 Select [9.SOUNDER] [8.OTHERS] [2.SCALE

LINE] on menu.

2 Set [2.SCALE LINE].

Indicated
Not indicated

TO SET SUPER RANGE

Super Range
When depth range (displayed depth range) changes, it writes whole previous image
recorded on the screen to after change.

1 Select [9.SOUNDER] [8.OTHERS] [3.SUPER

RANGE] on menu.

2 Set [3.SUPER RANGE].

ON Indicated
OFF Not indicated

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

93
TO SET WATER TEMP. GRAPH

Water Temp. Graph

Water temperature graph is shown on the screen. It enables you to know the variation
of water temperature and recognize the turning of tide.

1 Select [9.SOUNDER]
GRAPH] on menu.
[8.OTHERS] [4.TEMP

2 Set [4.TEMP GRAPH].

ON Indicated
OFF Not indicated

TO SET AUTO RANGE MAX. DEPTH

Auto Range Max. Depth

It sets Maximum Depth when Auto Range is operated.

1 Select [9.SOUNDER] [8.OTHERS]

[6.SPECIAL SETUP] [1.AUTO RANGE MAX]
on menu.
2
Set [1.AUTO RANGE MAX] .
30m 50m 100m 200m 300m Max. Depth

TO SET CLEAN ECHO

Clean Echo
Compared previous reflected signal with current reflected signal, the weakest reflected signal is
shown. Non-synchronized noise like interference with other boat’s fish finder, air bubbles, electric
noise, mechanical noise, etc. is eliminated and clear display less noise is shown.

1 Select [9.SOUNDER] [8.OTHERS] [6.SPECIAL

SETUP] [2. CLEAN ECHO] on menu.

Set [2.CLEAN ECHO].

2 OFF, WEAK, STRONG

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

94
TO SET STC

STC
This suppress sensitivity shallower than approx. 100m and eliminate reflected signal
from plankton and air bubble.
When STC is set to ON, sensitivity near sea surface decreases. When you increases
sensitivity for shallow water, set STC to OFF.

1 Select [9.SOUNDER] [8.OTHERS] [6.SPECIAL

SETUP] [3. STC] on menu.

2 Set [3.STC].
WEAK, MEDIUM, STRONG OFF: Canceled

TO SET TRANSMITTING OUTPUT

Transmitting Output
2 ranks of transmitting output (Low or High) can be selected.

1 Select [9.SOUNDER] [8.OTHERS] [6.SPECIAL

SETUP] [4. OUTPUT POWER] on menu.

2 Set [4. OUTPUT POWER].

HIGH, LOW

It is normally set to “HIGH”. However, when it may

give noise interference to other boats, decrease
output power.

Please refer to [HOW TO OPERATE MENU] ( page 14) for operation of menu.

95
 LIST OF FISH FINDER MENU AND MEANING
Menu item Meaning of setting
9. SOUNDER
1. DISPLAY Switch single frequency display on dual frequency
simultaneous display.
It is shown when LOW+HIGH is selected only.
600W-200kHz, 1.2kW-200kHz or 3.0kW-200kHz does
LOW only low freq. HIGH only high freq.
not have dual frequency function. LOW HIGH Low freq. on left screen and high
freq. on right screen
HIGH LOW High freq. on left screen and low
2. SWEEP Set sounding rates per one sweep. (Sweep/Sounding
SPEED rate x2, x3, 1/1, 1/2, 1/4, 1/8, Freeze: Stop sweep
3. AUTO Adjust range automatically so that bottom is shown at
RANGE optimum position of screen.
RANGE Change the range automatically.
SHIFT Move the displayed range automatically.
OFF Not used.
4. AUTO Adjust sensitivity automatically.
GAIN LOW Keep sensitivity low.
HIGH Keep sensitivity high.
OFF Not used.
5.EXPANSION 1. EXP.MODE Enlarge display
BOTTOM LOCK: Bottom contour is indicated as a straight line and
expansion view of certain area from it’s contour is shown.

AUTO EXP Enlarge up or down in the center of bottom.

MANUAL EXP Enlarge up or down in the center of option bottom.

OFF Cancel expansion mode.
2. EXP. RATE Set expansion rate when expansion mode is set.
x2 2 times x4 4 times x8 8times
6. A-MODE Indicate the strength of reflected signal.
ON Used OFF Not used
7. COLOR 1. BACK Set background color of screen.
SET COLOR BLACK BLUE WHITE DARK BLUE
2. COLOR Strength of reflected signal is shown in 7 ranks of
CONFIGURATION color except for background color 0 6 7ranks 1
3. CLUTTER Eliminate from the weakest signal (color) in turn.
0 12 ranks
8. OTHERS 1. UNIT Set the unit of depth readout.
METERS, FATHOMS, FEET, BRAZAS
2. SCALE Indicate line on depth scale.
LINE ON Indicated OFF Not indicated
3. SUPER When depth range changes, it writes whole previous image
RANGE recorded on screen after change. ON Used OFF Not used
4. TEMP Indicate water temp. graph (Water temp. sensor is
GRAPH option.)ON Indicated OFF Not indicated
5. SPECIAL 1. AUTO RANGE Set Maximum depth of Auto Range.
SETUP MAX 30m,50m,100m, 200m,300m,Max. Depth
2. CLEAN ECHO Show clear display less noise.
STRONG Used WEAK Used OFF Not used
3. STC Eliminate reflection like plankton and air bubble.
WEAK MEDIUM STRONG OFF Canceled
4. OUTPUT POWER Switch transmitting output.
HIGH LOW
is at factory setting.
96
97
 REFERENCE
DIMENSIONAL DRAWING ································································ 98
WIRING DIAGRAM ········································································ 100
CONNECTING DIAGRAM ······························································· 101
CAUTION WHEN OTHER GPS RECEIVER THAN STANDARD SUPPLIED
IS CONNECTED ······································································· 101
INSTALLATION OF MAIN UNIT ······················································ 102
INSTALLATION OF MAIN UNIT ONTO DASHBOARD························· 104
INSTALLATION OF TRANSDUCDER ················································ 108
1. THRU-HULL INSTALLATION ···················································· 108
INSTALLATION OF WATER TEMP. SENSOR······································ 109
STANDARD COMPOSITION ·····························································110
OPTIONAL PARTS···········································································111
GENERAL INFORMATION OF FISH FINDER ·····································112
TROUBLE SHOOTING·····································································114
SPECIFICATIONS ···········································································117
 DIMENSIONAL DRAWING

<HE-7301II, HE-7302II>

Drawing of holes for installing the bracket

<HE-1501, HE-1502>
WIRING DIAGRAM
 CONNECTOR DIAGRAM

CAUTION WHEN NOT STNDARD GPS RECEIVER IS USED

When other GPS receiver than standard HONDEX supplied one is connected with the unit,
you should conform geodesic system of GPS receiver with unit’s.
Select [8.OTHERS] [8. INITIAL] [7. SPECIAL MENU] [2. GPS GEODESIC SYSTEM]
and adjust with geodesic system of GPS receiver.
 INSTALLTION OF MAIN UNIT

Do not install in a simple method.

It causes to accident like human damage.
Please install correctly according to following procedure.

<HE-7301II, HE-7302II>

Procedure of installing main unit

Installation of main unit
1 Decision of place you install
While the bracket is mounted with unit, you decide the place you install and put the
mark.
Keep enough space behind the unit to connect with cables.
2 Installation of bracket
Install the bracket with supplied screws into four outside holes.
Face two oblique portions of both edges of bracket to rear of the unit.
3 Installation of unit
Install the unit referring to the below figure.
<HE-1501, HE-1502>

Procedure of installing main unit

Installation of main unit
1 Decision of place you install
While the bracket is mounted with unit, you decide the place you install and put the
mark.
Keep enough space behind the unit to connect with cables.
2 Installation of bracket
Install the bracket with supplied screws into eight outside holes.
3 Installation of unit
Install the unit referring to the below figure.
1). Fix the Fitting Metal by Hexagon bolt to the unit, then screw the Clamping knobs
with washers to the both side of the unit loosely.
2). Put the unit to slit of the bracket. with fitting the gap of the clamping knob.
3). Screw other 2 clamping knobs thru the bracket and the fitting metal.

Fitting Hexagon Bolt

Metal M8 x 12

Clamping Knob

with Washer

Bracket
 INSTALLATION OF MAIN UNIT ONTO DASHBOARD

Do not install in a simple method.

It causes to accident like human damage.
Please install correctly according to following procedure.

<10.4 inch models>

You can install the main unit onto the panel with screws through four holes of unit as
below.

Lid for installing onto

dashboard (4 points)

Please make hole on the panel referring to below dimensional drawing.

Take off four lids put on holes. Pull them toward front side. Then
lids are removed.

Put main unit into hole drilled on

the panel.

Open for panel

Fix the unit with tapping screws Put four lids onto the unit again.
M4x30.
<15 inch models>

Please make hole on the panel referring to below dimensional drawing.

INSTALLATION OF TRANSDUCER

Work on board is too unstable and risky.

Installation and maintenance of transducer should be done after
you land and fix the boat. Unless you keep it, human damage
resulting in serious wound will occur.

Installation inside hull with adhesive should be done while you ventilate well
inside the boat. Volatile gas from solvent or etc. causes to toxic symptoms.
Perfect waterproof treatment should be done when you install the transducer
through hull. If waterproof is not sufficient, it causes to marine disaster because
water comes in.

When you work using electric tools, please keep your hands dry.
If your hands are wet, it causes to electric shock.

INSTALLATION OF TRANSDUCER (Thru-hull)

1 Make an approx. 25mm hole on the bottom. (Do not install on the aluminum boat.
It may cause to corrosion.)
2 Insert screw of transducer into hole and fix with cork packing, one washer and one
nut. (Another one cork packing is reserve.)
Put the seal at joint point for waterproof.
When bottom of boat is tilted, install the transducer after putting block.
Size and figure of transducer differs depending on output power.
INSTALLATION OF WATER TEMP. SENSOR

Work on boat is too unstable and risky.

Installation and temperature of water temperature sensor should be done after
you land and fix the boat.
Unless you keep it, human damage resulting in serious wound will occur.

When you work using electric tools, please keep your hands dry.
It caused to electric shock.
STANDARD COMPOSITION
I
OPTIONAL PARTS
GENERAL INFORMATION OF FISH FINDER
TROUBLE SHOOTING
SPECIFICATIONS

Display 10.4 inch TFT color LCD

Display Style Portrait/Landscape
Number of pixel 640 × 480
Display

Operating Voltage DC11V 35V

Dimension Landscape 254.5(H) 268(W) 152(D) mm
Portrait 284(H) 268(W) 152(D) mm
Weight Approx.4.8

Accuracy (Position) 10m 2DRMS HDOP 3 (SA off)

Accuracy (Speed) 1m/s RMS HDOP 3 (SA off)
GPS Receiver

Receiving Frequency 1,575.42MHz±1MHz

Receiving Method Multi-channel (Receiving: 18 channels)
Responsibility Maximum Velocity 350km/h, Acceleration 1G
Sensitivity Less 130dBm
Receiving Code C A code

Chart Presentation Mercator Projection

Chart Scale 0.005 500NM
Track Display Memory Interval (Time) 1sec 5sec 10sec 20sec 30sec 1min 2min 5min 10min 20min

Track Display Memory Interval (Distance) 0.01 0.02 0.05 0.1 0.2 0.5 1 2NM km
Color of Track Line 7 colors Red, Yellow, Green, Magenta, White, Cyan, Blue
Track Display Memory Capacity 32,000 points
Waypoint Memory 1,000 points
Event Mark Memory 24,000 points
Plotter

Route Memory 20 routes

Land Full Paint
Map Turning
User Self Mapping
L/L Present Position
L/L Cursor
Boat Speed & Direction
Distance & Bearing to Waypoint.
Distance & Bearing to Cursor

Depth Line Full Paint Less than 100m Less than 1,000m more than 1,000m
Map Data C-Map NT+, MAX
Fish Finder is for HE-7301 , HE-1501 only.
28, 32/40, 36/65, 40/75, 50, 50/55, 85/90,
Frequency KHz
200, 50&200
600W 1.2kW 1.8kW 2.5kW 3.0kW
Power Output W
depends on freq.
Depth Range 0 2,000m
Auto Range OFF Range Shift
Auto Gain OFF Low High
A-Mode OFF ON
Fish Alarm OFF Small Large
Fish Finder

Water Temp. Alarm OFF Within Range Out of Range

Depth Alarm OFF Within Range Out of Range
Expansion Mode OFF Bottom Lock Auto Exp. Manual Exp.
Expansion Rate x2 x4 x8
Sweep Speed 6 steps Freeze
Background Color 4 colors Black Blue White Dark Blue
Color Configuration 7 kinds
Depth Unit meters, fathoms, feet, brazas
Scale Line OFF ON
Super Range OFF ON
STC OFF Weak Medium Strong
Output Power Low High

Remote CR04
Simple Remote CR05

GPS Receiver GP-16(H)

Thru-hull type TC02CS TCK01
Water Temp. Sensor
Transom type TC02ES TCT01
Optional Parts

Water Temp. Sensor

EK11
Extension Cable
Remote Extension Cable EK21
Monitor Power Supply Extension Cable 5P-5P 3m
RGB Cable 10m
RGB Extension Cable
10.4” LCD Monitor HE-7301M, HE-7302M
15” LCD Monitor HE1501M, HE-1502M