Scribd
Upload
13 views2 pages

Technical Specification Sheet

Uploaded by

aspcbd.com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views2 pages

Technical Specification Sheet

Uploaded by

aspcbd.com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical specification sheet

for StudioRIP Droplet To Plate 24/36 systems

General
Equipment type Computer to Plate system
Brand StudioRIP
Model Droplet to Plate 24/36
Made in Romania
Country of manufacturing Romania, with many parts manufactured in other countries

Installation requirements
Power for CTP 2 plugs of 220-240V, low current
Power for the developer 1 plug of 220-240V, 20A (4 kW)
Water for the developer washing machine type ¾” external thread, ideally warm (30–40°C)
Drain for the developer 20 mm or wider, ideally on floor level, max. 40 cm height
Optional network 100/1000 Mbps UTP cable
UPS/stabilizer not supplied, highly recommended if power peaks are possible

Technology
CTP technology Inkjet CTP system
Plate loading Manual
Plate type Conventional positive UV-sensitive plate with extra inkjet coating
Ink type Water based UV-blocking dye and pigment inks
Exposure 395 nm UV LEDs
Processing steps Pre-washing / processing / washing / drying
Processing chemicals Conventional place processor (e.g. Fuji HD-P1)
Processing technology Manual plate move, automatic maintenance of chemicals and water

Plate size & thickness


Minimum size 370×450 mm
Maximum size 770×1030 mm
Accepted thicknesses 0.15–0.30 mm

Imaging quality
Resolution 1440×1440 and 2880×2880 dpi
Line screen frequency up to 175 lpi
Minimum dot size 35 microns
Registration accuracy typically 0.025 mm, max. 0.1 mm (below A2) or 0.15 mm (above A2)
Color accuracy typically ±1.5%, max. ±3%
Imaging speed
Newspaper quality 15 plates of 770×1030 mm on 85 lpi
Commercial quality 15 plates of 400x510 mm on 175 lpi
Maximum quality 8 plates of 400x510 mm on 175 lpi (extra banding suppression)
Other sizes imaging time is proportional with the plate size

RIP specification
Brand StudioRIP
Model Inkjet Edition
Input file types PDF, PS, EPS, TIFF, JPEG, BMP
Control From PC and Mac workstations

RIP PC specification
RAM 4 GB
CPU Intel N3150 Quad Core
HDD 500 GB
Monitor (optional) 15.6”, Full HD (1920×1080), capacitive touch

Sizes & weights


CTP size 143 × 107 × 122 cm
Developer size 45 × 125 × 97 cm (normal version) / 45 × 138 × 110 cm (large version)
CTP weight 160 kg
Developer weight 140 kg

You might also like