Computer Quiz

1. A device that can convert digital signal to analog signal is-

(1) a packet
(2) Modem
(3) Switch
(4) Router
(5) None of these

2. A network that requires human interventions to route signals is –

(1) bus network
(2) ring network
(3) star network
(4) T-switched network
(5) None of these

3. A dot-matrix printer-
(1) is an input-output device
(2) is an output device only
(3) is an input device only
(4) only 2 & 3
(5) None of these

4. Which of the following is true?

(1) Plotters are not available for microcomputer systems
(2) Micro-computer are not programmed like conventional computers
(3) Mini-computers are task-oriented
(4) The contents of ROM are easily changed
(5) None of these

5. ROM is composed of-

(1) Magnetic cores
(2) Micro-processors
(3) Photoelectric cells
(4) Floppy disks
(5) None of these

6. The computer code for interchange of information between terminals is-

(1) ASCII
(2) BCD
(3) BCDIC
(4) Hollerith
(5) None of these

7. A temporary storage area, attached to the CPU, for I/O operations, is a-

(1) Channel
(2) Buffer
(3) Register
(4) Core
(5) None of these

8. A characteristic of the ASCII code is

(1) its limitation to a maximum of 96 character configuration
(2) its use of the zone codes 1010, 1011 and 1100
(3) its independence from Hollerith code
(4) All of these
(5) None of these

9. A term used interchangeably with diskette is-

(1) Disk cartridge
(2) Disk pack
(3) Floppy disk
(4) Packette disk
(5) None of these

10. The daily processing of corrections to customer accounts best exemplifies the processing mode of
(1) batch processing
(2) real-time processing
(3) time-sharing
(4) off-line processing
(5) None of these

11. Computers can be classified in which of the following hierarchical orders?

(1) PC, Large, Super Micro, Super Computer
(2) Super Micro, PC, Large, Super Computer
(3) PC, Super Micro, Large, Super Computer
(4) Large, Super Micro, Super Computer, PC
(5) None of these

12. Consider the following statements about Internet facility:

I. It serves as the largest one-line information system.
II. It provides the most dependable and latest mode for sending E-mail.
III. Recurring expenditure on communication E-mail is very high.
IV. It is often misused and has triggered cyber-crimes.
Which of these statements are correct?
(1) I, II and IV
(2) I and IV
(3) II, III and IV
(4) II and III
(5) All are correct

13. Compiler is the-

(1) name given to the computer operator
(2) part of the digital machine to store the information
(3) translator of source program to object program
(4) part of arithmetic logic unit
(5) operator of Boolean Algebra

14. Main memory is-

(1) Random Access Memory
(2) Read only Memory
(3) Serial Access Memory
(4) All of The above
(5) None of these

15. Which of the following is the smallest and fastest computer imitating brain working?
(1) Supercomputer
(2) Quantum Computer
(3) Param-10,000
(4) IBM chips
(5) None of these

16. To locate a data items for storage is-

(1) Field
(2) Feed
(3) Database
(4) Fetch
(5) None of the above

17. A type of line printer that uses an embossed steel band to form the letters printed on the paper is-
(1) Golf ball printer
(2) Dot-matrix printer
(3) Laser printer
(4) Band printer
(5) None of the above

18. A software used to convert source program instructions to object instruction is known as
(1) Compiler
(2) Assembler
(3) Interpreter
(4) Language processor
(5) None of the above

19. Which of the following statement is wrong?

(1) Windows XP is an operating system
(2) Linux is owned and sold by Microsoft
(3) Photoshop is a graphical design tool by Adobe
(4) Linux is free and open source software
(5) None of these

20. Which one of the following is not an application software package?

(1) Red hat Linux
(2) Microsoft Office
(3) Adobe PageMaker
(4) Open Office
(5)None of these

1. 2
2. 4
3. 2
4. 3
5. 2
6. 1
7. 2
8. 3
9. 3
10. 1

Read more: http://www.bankersadda.com/2015/03/computer-quiz_9.html#ixzz4bTmqCVsb Computer :

Quiz
1. If you use shortcut key F11 to create a chart on chart sheet then it creates
1.Three dimensional line chart
2.Three dimensional column chart
3.Two dimensional bar chart
4.Two dimensional column chart.
5. None of these

2. The popular DOS based spreadsheet package is

1. Word
2. Lotus1-2-3
3. Smart cell
4. Excel
5. None of these

3. A slide-title master pair is

1. A slide master and title master for a specific design template
2. A title area and text area of a specific slide
3. A slide master and title master merged into single slide.
4. None of the above
5. None of these

4. How to select one hyperlink after another during a slide presentation?

1. Press Alt + shift
2. Press ctrl + H
3. Press Tab
4. Press ctrl + K
5. None of these

5. What can you print?

1. An entire worksheet
2. A single worksheet
3. A range of cells by range name
4. All of the above
5. None of these

6. Motion path is a
1. Method of moving items on a slide
2. Method of advancing slides
3. Type of animation entrance effect
4. All of the above
5. None of these

7. How can one create only horizontal page break?

1. By first selecting a row below the row where you want the page break to occur.
2. By selecting a cell in column A.
3. By selecting a cell in row1.
4. Both 1 and 2
5. None of these

8. How can you link excel worksheet data to a word document?

1. With a hyperlink
2. With a copy and paste buttons on the standard toolbar.
3. With a right drag method
4. With a copy and paste special command
5. None of these

9. Trigger in the context of animation is nothing but

1. An item on the slide that performs an action when clicked.
2. The name of a motion path
3. An action button that advances to the next slide.
4. None of the above
5. None of these

10. In what way the material that consists of text and numbers be best
presented?
1. A bullet slide
2. A title slide
3. A table slide
4. None of the above
5. None of these

11. Choose the correct answer for the statement “You can create hyperlinks from
excel work book to”
1. A web page on the internet
2. A web page on company internet
3. Other office 97 application documents
4. All of the above
5.None of these

12. The toolbar that provide different options in various master views is
1. Formatting toolbar
2. Drawing toolbar
3. Standard toolbar
4. Common task toolbar
5. None of these

13. If a person wants to have a same look of all the slides in the presentation then
he/she should use
1. Add a slide option
2. A presentation design template
3. The slide layout option
4. Outline view
5. None of these

14. How can you edit an embedded organization chart object?

1. By double clicking the organization chart object.
2. By right clicking the chart object, then clinking edit MS-organization chart object.
3. By clicking edit object
4. Both 1 and 2
5. None of these

15. What is the advantage of using a spreadsheet?

1. Automatic calculations
2. Calculations are automatically updated if data is changed.
3. More flexibility
4. All of the above
5. None of these
16. We can add two kinds of sound effects files to the presentation of Microsoft
PowerPoint and they are
1. .wav and .jpg
2. .wav and .gif
3. .wav and .mid
4. .jpg and .gif
5. None of these

17. The shortcut key to select more than one slide in a presentation is
1. Shift + click each slide
2. Shift + drag each slide
3. Ctrl + click each slide
4. Alt + click each slide
5. None of these

18. In an electronic database, when the words or phrases is being searched and if
found then it is called
1. IT
2. Bug
3. Hit
4. Default
5. None of these

19. To a PowerPoint show one can add the file with extension
1. .jpg
2. .giv
3. .wav
4. All of the above
5. None of these

20. What do you mean by auto clipart?

1. That scans presentation for incorrect spelling in word arts objects
2. That scans presentation for incorrect spelling in your words on each slide
3. That automatically places clipart in your presentation
4. All of the above
5. None of these

Read more: http://www.bankersadda.com/2015/03/computer-quiz.html#ixzz4bTmuZxh9 SATURDAY, 28

FEBRUARY 2015

Computer Quiz
1. The vast network of computers that connects millions of people all over the world is called _____.

1) LAN

2) Web

3) Hypertext

4) Internet

5) None of these
2. The property that, when classes are arranged in a hierarchy, each class assumes the attributes and
methods of its ancestors is _______.

1) generalization

2) inheritance

3) encapsulation

4) information hiding

5) None of these

3. The software component of an expert system that draws conclusions is the _____.

1) user interface

2) database

3) inference engine

4) I/O controller

5) model base

4. The attributes and methods for each object are stored in _______.

1) an object instance

2) an object connection

3) an assembly structure

4) an object repository

5) None of these

5. An E-R diagram is a graphic method of presenting ____.

1) primary keys and their relationships

2) primary keys and their relationships to instances

3) entity classes and their relationships

4) entity classes and their relationships to primary keys

5) None of these

6. ________ is an invalid type of database key.

1) Structured primary key

2) Atomic primary key

3) Primary key

4) Composite primary key

5) None of these

7. A processor that collects the transmissions from several communications media and sends them over a
single line that operates at a higher capacity is called ______.

1) multiplexor

2) bridge

3) hub

4) router

5) None of these

8. Bandwidth refers to _______.

1) the cost of the cable required to implement a WAN

2) the cost of the cable required to implement a LAN

3) the amount of information a peer-to-peer network can store

4) the amount of information a communications medium can transfer in a given amount of time

5) None of these

9. _________ is a primary key of one file that also appears in another file.

1) Physical key

2) Primary key

3) Foreign key
4) Logical key

5) None of these

10. The technique that extends storage capacities of main memory beyond the actual size of the main
memory is called _______.

1) multitasking

2) virtual storage

3) multiprocessing

4) multiprogramming

5) switching

11. Customers, facilities, knowledge workers, business information, communication infrastructure and
computer equipment are all considerations in a good _______ plan.

1) Hacker

2) Disaster recovery

3) Security

4) Risk management

5) None of these

12. Which of the following correctly defines the term E-Banking?

A) It is the short form of Efficient Banking which means providing all banking related services to the
customers in minimum required time during their visit to the branch.

B) E-Banking is providing banking facilities to all the customers through ATMs only which restricts their
visits to a bank branch to a bare minimum.

C) E-Banking implies provisions of banking products and services through electronic delivery channels
like ATMs, Phone, internet, mobile phones etc.

1) Only A

2) Only B

3) Only C
4) Only A & B

5) Only A & C

13. SMTP, FTP and DNS are applications of the ____ layer.

1) data link

2) network

3) transport

4) application

5) None of these

14. In a database, information should be organised and accessed according to which of the following?

1) Physical position

2) Logical structure

3) Data dictionary

4) Physical structure

5) None of these

15. Traffic in a VPN is not ______.

1) invisible from public networks

2) logically separated from other traffic

3) accessible from unauthorised public networks

4) restricted to a single protocol in IP Sec

5) None of these

16. A ________ is not a form of Biometrics.

1) fingerprint

2) password

3) retina scan
4) breath scan

5) None of these

17. A compiler ______.

1) translates machine language into a high level language

2) translates one statement at a time as the program executes

3) translates two statements at a time as the program executes

4) produces object code

5) is less sophisticated than an assembler

18. References to each file on a disk are stored in a ______.

1) file allocation table

2) root allocation table

3) linking directory

4) root directory

5) directory allocation table

19. A sender must not be able to deny that he sent a specific message when he in fact did. This is an
aspect of security called ______.

1) privacy

2) authentication

3) integrity

4) non-repudiation

5) None of these

20. _______ is an access method in which collisions are entirely avoided.

1) CSMA

2) CSMA/CD
3) CSMA/CA

4) All of these

5) None of these

1. 4 2. 2 3. 3 4. 4 5. 3

6. 1 7. 1 8. 4 9. 3 10. 2

11. 4 12. 3 13. 4 14. 2 15. 2

16. 2 17. 4 18. 1 19. 4 20. 5

Read more: http://www.bankersadda.com/2015/02/computer-quiz_28.html#ixzz4bTmyhiz6 Computer:

Quiz
1. __________________ applications refers to those applications in which text, sound, graphics,
motion video and animation are all combined.
a.) Animation
b.) Multimedia
c.) Maxmedia
d.) Flash
e.) None of these

2. A language that refers to the way people think mathematically is called as __________
a.) Functional language
b.) Cross-platform language
c.) Event driven programming language
d.) None of these

3. When you are typing the text in a document, you would need to hit the enter key at the end of
every ____________.
a.) Line
b.) Sentence
c.) Paragraph
d.) Word
e.) File

4. ___________________ is a set of rules that tell the computer what to do.

a.) Procedural language
b.) Natural language
c.) Command language
d.) Programming language
e.) Instructions

5. The programs and data processed by the CPU are stored in _______________
a.) Internal Memory
b.) External Memory
c.) Mass Memory
d.) Non-volatile memory
e.) None of these

6. _____________ refers to a set of characters of a particular design.

a.) Calligraph
b.) Typeface
c.) Keyface
d.) Formation
e.) None of these

7. ___________ is the detailed written description of the programming cycle and the program
accompanied by the test results and a printout of the program.
a.) Output
b.) Spec Sheets
c.) Documentation
d.) Report
e.) Detail sheet

8. In a slide presentation, a typical slide does not have ___________

a.) Photo images, charts, graphs
b.) Clip arts
c.) Audio Clips
d.) Content
e.) Full motion video

9. In ____________, a file is transferred from another computer to your computer.

a.) Copy
b.) Upload
c.) Download
d.) Upgrade
e.) RSS

10. ____________ in a computer is used for calculation and comparison.

a.) ALU
b.) ROM
c.) CPU
d.) Control Unit
e.) None of these

11. _____________ is a talk that can be automatically downloaded over the Internet and is
available in Digital Format.
a.) Wiki
b.) Show
c.) Podcast
d.) Blog
e.) Movie

12. _____________ displays each slide of the PPT as a thumbnail and is used to re-arrange them.
a.) Slide Show
b.) Slide Display
c.) Slide Design
d.) Slide Layout
e.) Slide Sorter
13. _____________ are the parallel electrical conducting lines that link different components on
the mother board.
a.) Buses
b.) Conductors
c.) Assemblies
d.) Connectors
e.) None of these

14. The mirror image of the whole hard disk including the OS, applications, files and data is
created by a ______________________.
a.) Utility program
b.) Driver
c.) Backup software
d.) OS
e.) None of these.

15. _______________ is a point and draw device.

a.) Scanner
b.) Printer
c.) Mouse
d.) Keyboard
e.) CD- ROM

16. Which of the following deals with data organised in rows and columns?
a.) Matrix
b.) Spreadsheet
c.) Word document
d.) PPT
e.) MS Paint

17. If you want to find the Paste Special option, you would use the Clipboard group on the tab of
PowerPoint _____________.
a.) Home
b.) Slideshow
c.) Page Layout
d.) Design
e.) Insert

18. _________ are usually downloaded into the folder carrying Temporary Internet Files and are
written into the computer by the websites you visit.
a.) Anonymous Files
b.) Cookies
c.) Banner Ads
d.) Images
e.) History

19. _______________ refers to the letter and number of the intersecting column and row.
a.) Cell address
b.) Cell location
c.) Cell position
d.) Cell column
e.) Cell row

20. In a pull down menu if you see that a command appears faded, it means that ____________
a.) the command is not applicable to this document.
b.) the command is not accessible at the moment.
c.) there are no keystrokes equivalent to those commands.
d.) None of these
e.) All of these

Answers
1.B
2.A
3. C
4. D
5. D
6.B
7. B
8.E
9.C
10. A
11.C
12.E
13.A
14. C
15.C
16. B
17. B
18.B
19.A
20B

Read more: http://www.bankersadda.com/2015/02/computer-quiz_23.html#ixzz4bTn25lZV Computer:

quiz
1.Which of the following controls the way in which the computer system functions
and provides a means by which users can interact with the computer?
(a) O/S
(b) Motherboard
(c) Platform
(d) I/O gateway
(e) None of these

2.Which of the following is the process of transferring software programme from

a secondary storage media into the hard disc?
(a) Storage
(b) Updating
(c) Upload
(d) installation
(e) None of these

3.For large network which topology is used?

(a) Star
(b) Ring
(c) Bus
(d) Mesh
(e) None of these

4. The time consumed by a piece of equipment’s operation is called

(a) Access time
(b) Real time
(c) Live time
(d) Effective tim
(e) None of these

5. The operating system is the most common type of ____________ software.

(a) Communication
(b) System software
(c) Word-processing software
(d) Spreadsheet software
(e) None of these

6. A VDU is used as
(a) Input device only
(b) Output device only
(c) Both (a) & (b)
(d) Neither (a) nor (b)
(e) Voice data translation device only

7. Which of the following is specially designed computer chips that reside inside
other devices, such as your car or your electronic thermostat etc.?
(a) Robotic computers
(b) Mainframe computers
(c) Embedded computers
(d) Peripheral computers
(e) None of these

8. The steps and tasks needed to process data, such as responses to questions or
clicking an icon, are called __________.
(a) The O/S
(b) Instructions
(c) Data flow
(d) Application software
(e) None of these

9. Which of the following storage medium stores instructions or data temporarily

during processing?
(a) Cache
(b) ROM
(c) EPROM
(d) RAM
(e) None of these

10.Which of the following is not a database object?

(a) Table
(b) Queries
(c) Reports
(d) Relationship
(e) All of the above

11. The type of input includes

(a) Programme
(b) Data
(c) Commands
(d) User response
(e) All of the above

12. The first layer in OSI reference model is

(a) Network
(b) Physical
(c) Application
(d) Data link
(e) None of these

13.The two broad categories of software are generally

(a) Word processing and spreadsheet
(b) Transaction and application
(c) Windows and Mac OS
(d) System and application
(e) None of these

14.Which of the following is not a language of DBMS?

(a) PASCAL
(b) PLI
(c) DML
(d) DDL
(e) All of the above

15. The case that holds all the physical parts of the computer is called
(a) System unit
(b) Platform
(c) Integrated platform
(d) Mainframe
(e) None of these

Answers
1. A
2. D
3. D
4. D
5. B
6. B
7. B
7. C
8. B
9. A
10.D
11. E
12. B
13. D
14. A
15. A

Read more: http://www.bankersadda.com/2015/02/computer-quiz_14.html#ixzz4bTn5KIcz