GENERAL NOTES :

- All dimensions are in millimeters.

- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside

6 2 4 3 diameter.
- The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.
A

n 2810
9758.1

°
65

C
2458.1

7 1

5
16 16 NUT DIN 934 - M27 CL 8
15 16 SPRING WASHER DIN 128 - A27 St
14 16 WASHER DIN 125 - A 28 St
13 16 HEXAGON BOLT DIN 933 - M27 x 80 CL 8.8
12 24 HEXAGON BOLT DIN 933 - M8 x 22 CL 8.8
A
8 B C 14 11 48 NUT DIN 934 - M8 CL 8
1:5 10 48 SPRING WASHER DIN 128 - A8 St
1:5 1:5 9 24 HEXAGON BOLT DIN 933 - M8 x 30 CL 8.8
8 48 WASHER DIN 125 - A 8,4 St
7 1 BIN ACTIVATORS
6 1 RAILING 208-0101-0010-0
5 1 MINIMUM SWITCH
4 2 MAXIMUM SWITCH
3 1 PRESSURE RELIEF VALVE
2 1 FILTER
1 1 SILO WELDING 208-0101-0001-0
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION

IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION.

R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT

BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision

İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

4423,005 kg A1 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
12 11 10 9 10 11 8 13 16 15 ÇİZEN / Drawn by

KONTROL / Check.
Halil İbrahim KORKMAZ
Haktan İbrahim YILMAZ
20.07.2023
DIN ISO'ya göre
Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
Phone: 00 90 (216) 290 07 47
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1 : 30 MISIR GYPROC
4 4 Project Name

MONTAJ ADI
Company

AKIŞ ŞEMASI No
Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name Drawing Nr. 208-0101-0000-0

Form Revizyon No:1 / Tarih:15.02.2023

 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
A
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
A-A - Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
9 5
4 decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.
80

40
B B

1340
4

60
120

4 10

1480

60
120

5
8

1480

60
1
120

9035.8

9035.8
5 8
1480

60
60
120

2
1480

1
6
120

°
65

1735.8

50°

1165.8
6
70

n 1250
n 1250
A

13 14 17
7

18
3046
11 15 16
2846
2546 18 1 Half Coupling Threaded - Class 3000 1/2 x 1/2 (BSP THREAD) 208-0101-4009-0 ASME B16.11
17 1 PLATE 208-0101-1033-0 St 37
16 1 PLATE 208-0101-1032-0 St 37
15 1 PLATE 208-0101-1020-0 St 37
14 1 PLATE 208-0101-1031-0 St 37
13 1 PLATE 208-0101-1030-0 St 37
514
30° 12 12 PLATE 208-0101-1025-0 St 37
30° 11 4 CONNECTING FOOT 208-0101-0008-0
°
30 10 1 PLATE 208-0101-1024-0 St 37
9 4 LIFTING APPARATUS 208-0101-0009-0
30

8 2 PLATE 208-0101-1021-0 St 37
°

7 1 Coupling Threaded - Class 3000 1 x 1 (BSP THREAD) 208-0101-4006-0 ASME B16.11

30°

6 12 PLATE 208-0101-1026-0 St 37
5 1 SILO TOP CLOSING 208-0101-0002-0
4 2 NPU 80 PROFILE 208-0101-3002-0 St 37
30°

2546

2846

3046

3 1 PLATE 208-0101-1002-0 St 37

B-B
30°

2 1 PLATE 208-0101-1001-0 St 37
1 10 NPU 120 PROFILE 208-0101-3001-0 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME
30°

R5 FOR QUOTATION
R4 FOR INFORMATION
30

12
°

1509

IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION.

R3 FOR APPROVAL
°
30 R2 FOR MANUFACTURING
6

10° 2 0° R1 FOR CONSTRUCTION

REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT

BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

57.5

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

5 6 MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision

İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

4318,195 kg A1 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
148 ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
1 20 KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
DIN ISO 2768-1 m,
498 ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
Fax : 00 90 (216) 290 43 83

514 ÖLÇEK / Scale PROJE ADI ŞİRKET

1 : 30 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
SILO WELDING 208-0101-0001-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

316
215

230
3
651 4 6

750

30°

598

450

0
104.6

300
325

n 275 2 5 1
600

6 1 Coupling Threaded - Class 3000 3/4 x 3/4 (BSP THREAD) 208-0101-4007-0 ASME B16.11 Steel
5 1 Coupling Threaded - Class 3000 1 x 1 (BSP THREAD) 208-0101-4006-0 ASME B16.11 Steel
1050 4 1 MATERIAL INLET FLANGE 208-0101-0007-0
3 1 MANHOLE 208-0101-0004-0
2 1 SILO FILTER FLANGE 208-0101-0003-0
1 1 PLATE 208-0101-1003-0 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION

IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION.

R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT

BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision

İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

272,841 kg A2 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1 : 15 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
SILO TOP CLOSING 208-0101-0002-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
15°
approve all dimensions before manufacturing and to report
7.5° missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

0
77
82

n
9 n

A A

A-A 2 1
5

2 1 PLATE 208-0101-1005-0 St 37
205

1 1 PLATE 208-0101-1004-0 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION
n 770 IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION. R3 FOR APPROVAL
FOR MANUFACTURING
n 780 R2
R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT
BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

21,715 kg A3 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1: 10 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
SILO FILTER FLANGE 208-0101-0003-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
6 - Max. permissible tolerances ovality %0.2 of the inside
diameter.
n 770 - The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

M12
220

n 710

3 7 4 5 2 1
7 1 MANHOLE BOTTOM HOLE 208-0101-0006-0
6 1 MANHOLE TOP COVER 208-0101-0005-0
5 2 STUD BOLTS 208-0101-4002-0 DIN 976-1 M12x140 St37
4 4 SHAFT-1 208-0101-1016-0 St37
3 4 PIPE Ø26,9x3,2 208-0101-3003-0 DIN 2441 St37
2 8 SPLIT PIN 208-0101-4003-0 DIN 94 5x32 St37
1 2 WING NUT 208-0101-4004-0 DIN 315 M12 St37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION
IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION. R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT
BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

69,140 kg A3 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1: 10 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
MANHOLE 208-0101-0004-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
888
diameter.
848 - The manufacturing company is obliged to check and
A 8 approve all dimensions before manufacturing and to report
5 missing or incorrect dimensions to ENTE project department.

5
- Longitudinal and circumferential seams shall not cross.

133.8
- Each longitudinal sheet plate welding shall be sequenced.

5
- All sheet weldings shall be seal weld. manufacturer shall
A decide welding method and welding groove accordingly.
n 20 - Full penetrant is required.
- Magnetic test is required for weld joints.

436.3

64
75 0
n

77 6
n 66
160
2
n 160
64

2 5 6 3 4 1

6 1 5mm EPDM GASKET 208-0101-4001-0

5 1 PLATE 208-0101-1010-0 St37
4 4 PLATE 208-0101-1009-0 St37
3 2 PLATE 208-0101-1008-0 St37
2 1 PLATE 208-0101-1007-0 St37
1 1 PLATE 208-0101-1006-0 St37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION
IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION. R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT
BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
5

A-A
İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

37,242 kg A3 1/1 1
20

İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre
n 666 Haktan İbrahim YILMAZ Phone: 00 90 (216) 290 07 47
KONTROL / Check.
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
n 752 ÖLÇEK / Scale PROJE ADI ŞİRKET
1: 10 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
MANHOLE TOP COVER 208-0101-0005-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
n 710
diameter.
- The manufacturing company is obliged to check and

5
approve all dimensions before manufacturing and to report

20
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
220

- Each longitudinal sheet plate welding shall be sequenced.

- All sheet weldings shall be seal weld. manufacturer shall

40
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

3 2 1

134
31
82

5 4
345

280
151

697

5 2 PLATE 208-0101-1015-0 St37

151

4 4 1 PLATE 208-0101-1014-0 St37

8

280

3 8 PLATE 208-0101-1013-0 St37

2 2 PLATE 208-0101-1012-0 St37
82

1 1 PLATE 208-0101-1011-0 St37

MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
31

R4 FOR INFORMATION
IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION. R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT
BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

29,619 kg A3 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1: 10 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
MANHOLE BOTTOM HOLE 208-0101-0006-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
45° - Unspecified Weld Thickness A=0.8*s.
22. 5° - Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
n 22 - Magnetic test is required for weld joints.

n2 0 .3
40 16
n

n 168.3

n 285
4
24

200

2 1 PN 16 DN150 FLANS 208-0101-4008-0 DIN 1092-1 St 37

1 1 PIPE Ø168.3 x 4 208-0101-3004-0 DIN 2441 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION
IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION. R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT
BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

10,386 kg A3 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1:2 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
MATERIAL INLET FLANGE 208-0101-0007-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

570

590
3
83.6 190 190 83.6
63
20

20 20

1 2

3 1 PLATE 208-0101-1017-0 St 37
2 1 PLATE 208-0101-1019-0 St 37
1 3 PLATE 208-0101-1018-0 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
30
80

R4 FOR INFORMATION

IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION.

R3 FOR APPROVAL
R2 FOR MANUFACTURING
135 135
R1 FOR CONSTRUCTION
64.1 480 64.1 REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT

BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
608.2

İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

88,011 kg A2 1/1 4
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1:5 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
CONNECTING FOOT 208-0101-0008-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

n 60
250

2 1
2 1 PLATE 208-0101-1022-0 St 37
58

1 1 PLATE 208-0101-1023-0 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION
131

15

IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION. R3 FOR APPROVAL

R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
AS BUILT
58

REV.NO REVİZYON AÇIKLMA - Revision Explanation

BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision
İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

6,923 kg A3 1/1 4
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1:2 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
LIFTING APPARATUS 208-0101-0009-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023
 GENERAL NOTES :
- All dimensions are in millimeters.
- Unspecified Weld Thickness A=0.8*s.
- Max. permissible tolerances ovality %0.2 of the inside
diameter.
- The manufacturing company is obliged to check and
approve all dimensions before manufacturing and to report
missing or incorrect dimensions to ENTE project department.
- Longitudinal and circumferential seams shall not cross.
- Each longitudinal sheet plate welding shall be sequenced.
- All sheet weldings shall be seal weld. manufacturer shall
decide welding method and welding groove accordingly.
- Full penetrant is required.
- Magnetic test is required for weld joints.

1170
620
75
60
60
120 8 9 4 7 5 6

30°

30
°
30

°
04
n 29

29
n

47
.7
30°

30°
30°

30°

9 2 PLATE 208-0101-1034-0 St 37
8 1 PIPE Ø 33.7 x 2 208-0101-3009-0 DIN 2441 St 37
7 1 PIPE Ø 33.7 x 2 208-0101-3008-0 DIN 2441 St 37
6 11 PIPE Ø 33.7 x 2 208-0101-3007-0 DIN 2441 St 37
1 3 5 10 PIPE Ø 33.7 x 2 208-0101-3006-0 DIN 2441 St 37
°
30

4 2 PIPE Ø 33.7 x 2 208-0101-3005-0 DIN 2441 St 37

30
°

3 1 PLATE 208-0101-1028-0 St 37
2 1 PLATE 208-0101-1027-0 St 37
1 12 PLATE 208-0101-1026-0 St 37
MON.NR. ADET PARÇA ADI RESİM NO. STANDART NO. MALZEME

R5 FOR QUOTATION
R4 FOR INFORMATION
30° 30°

IT CAN NOT BE USED OR COPIED WITHOUT WRITTEN PERMISSSION.

R3 FOR APPROVAL
R2 FOR MANUFACTURING

R1 FOR CONSTRUCTION
REV.NO REVİZYON AÇIKLMA - Revision Explanation AS BUILT

BU TASARIMIN KULLANIM HAKKI ENTE A.Ş. AİTTİR.

THIS DRAWING IS SOLELY BELONG TO ENTE A.Ş.

MALZEME - Material BOYA KODU / Paint Code AĞIRLIK / Weight Page Size Sayfa / Sheet ADET - Quantity REVİZYON - Revision

İZİNSİZ KULLANILAMAZ VE KOPYALANAMAZ.

91,118 kg A2 1/1 1
İSİM / Name TARİH / Date Genel Tolerans Barbaros Mah. Mor Sümbül Sok. No:5/310
general tolerance
ÇİZEN / Drawn by Halil İbrahim KORKMAZ 20.07.2023 Deluxia Palace Ataşehir- İSTANBUL-TÜRKİYE
DIN ISO'ya göre Phone: 00 90 (216) 290 07 47
KONTROL / Check. Haktan İbrahim YILMAZ
DIN ISO 2768-1 m, Fax : 00 90 (216) 290 43 83
ONAY / Appr. Süleyman DEĞER DIN ISO 2768-2 K
ÖLÇEK / Scale PROJE ADI ŞİRKET
1 : 15 Project Name MISIR GYPROC Company

MONTAJ ADI AKIŞ ŞEMASI No

Assembly Name
50 m³ SILO FLOW SHEET Nr. 200BH01

PARÇA ADI RESİM NO

Part Name
RAILING 208-0101-0010-0
Drawing Nr.
Form Revizyon No:1 / Tarih:15.02.2023