Scribd
Upload
3 views

Problem 2

Uploaded by

manish74618877
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

Problem 2

Uploaded by

manish74618877
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Problem 2:-

#include <DHT.h>

#define DHTPIN 2

#define PIRPIN 3

#define LIGHTPIN 4

#define FANPIN 5

#define BUZZERPIN 6

#define DHTTYPE DHT11

#define TEMP_THRESHOLD 30

DHT dht(DHTPIN, DHTTYPE);

void setup() {

// Initialize pins

pinMode(PIRPIN, INPUT);

pinMode(LIGHTPIN, OUTPUT);

pinMode(FANPIN, OUTPUT);

pinMode(BUZZERPIN, OUTPUT);

Serial.begin(9600);

dht.begin();

void loop() {

// Read PIR sensor to check for motion

int motionState = digitalRead(PIRPIN);

// Read temperature from DHT11 sensor

float temperature = dht.readTemperature();


if (isnan(temperature)) {

Serial.println("Failed to read temperature!");

return;

Serial.print("Temperature: ");

Serial.print(temperature);

Serial.println(" °C");

if (motionState == HIGH)

digitalWrite(LIGHTPIN, HIGH);

Serial.println("Motion detected! Light ON.");

} else {

digitalWrite(LIGHTPIN, LOW);

Serial.println("No motion detected. Light OFF.");

if (temperature > 25) {

digitalWrite(FANPIN, HIGH);

Serial.println("Fan ON.");

} else {

digitalWrite(FANPIN, LOW);

Serial.println("Fan OFF.");

if (motionState == HIGH && temperature > TEMP_THRESHOLD) {

digitalWrite(BUZZERPIN, HIGH);

Serial.println("ALARM! High temperature with motion detected!");

} else {

digitalWrite(BUZZERPIN, LOW);

delay(2000);

You might also like