Scribd
Upload
22 views4 pages

JVS JRC Relay

Uploaded by

Bhanu Chander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views4 pages

JVS JRC Relay

Uploaded by

Bhanu Chander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Powering Innovation

Four Pole, Non-Directional, IDMT 3 O/C + 1 E/F Relay With


Inst. Highset For Both O/C And E/F Elements
JRC 068

JVS ELECTRONICS PVT. LTD.


#121,Manchanayakanahalli,
Bangalore Mysore Highway, Bidadi,
Ramanagara District - 562 109, Karnataka, India
+91 94808 26272, +91 94808 26260
[email protected], www.jvselectronics.in
Four Pole, Non-Directional, IDMT 3 O/C + 1 E/F Relay With
Inst. Highset For Both O/C And E/F Elements
JRC 068
FEATURES
 So�ware based design
 Programmable �me current characteris�cs
 Choice of four IDMT curves
 Draw out case

APPLICATIONS
The relay provides �me graded phase and earth
fault protec�on of Genrators, Transformers, feeder,
capacitors etc.,

PRINCIPAL OPERATION
The relay measures the line current from each of the phases and if exceeds the set threshold, then
relay extends a trip signal a�er the opera�ng �me. The relays opera�ng �me is determined by
selec�ng one of the four inverse �me current characteris�cs. The relay has facility to ac�ve /
inhibit the high set protec�on feature. The relay output contacts are self reset / hand reset type.
Relay opera�on without any fault current is determinated by trip test facility.

TECHNICAL DATA
RATINGS
Current ra�ng : 1A / 5A
Auxiliary Supply : 1) 20-60V DC
: 2) 75 – 150V AC / DC
: 3) 175 – 300V DC
: 185 – 250V AC
SETTINGS
Opera�ng characteris�cs : 1) 3.0s Normal Inverse
: 2) 1.3s Normal Inverse
: 3) 1.5s Very Inverse
: 4) 0.8s Extremely Inverse
: 5) 0.6s Extermely Inverse
Phase Overcurrent : 50% to 200% in steps of 10% or
: 20% to 140% in steps of 10%
Earth fault : 5 to 80% in steps of 5%
TMS : 0.1 to 1.0 in steps of 0.01(Seperate for O/C & E/F)
Phase Hi-set : 200% to 3200% in steps of 200%
Earth fault Hi-set : 50% to 800% in steps of 50%

OVER LOAD RATINGS


Current input : 2 �mes rated con�nuously
: 20 �mes Rated for 3s
: 40 �mes of rated for 1s

[email protected], www.jvselectronics.in
Four Pole, Non-Directional, IDMT 3 O/C + 1 E/F Relay With
Inst. Highset For Both O/C And E/F Elements
JRC 068
BURDEN
Current input : 0.2VA per phase (rated 5A)
: 0.05VA per phase (rated 1A)
Auxiliary supply : Less than 8W(Non operated)
: Less than 10W(Operated)

ACCURACY
Opera�ng value : 105% to 120% of se�ng
Drop-off / pick-up : Between 80% to 95%
Opera�ng �me : +/-5% or +/- 30ms whichever is higher
High set opera�ng value : +/-5% or +/- 30ms whichever is higher
High set opera�ng �me : Less than 30ms @ 2 �mes current se�ng
Reset Time : 160ms to 180ms

CONTACT RATINGS
Trip / Alarm : 10A at 24V DC/230V AC

CONTACTS DURABILITY
Unloaded contact : 10,000 Opera�ons
Loaded contact : 20,000 Opera�ons

MECHANICAL DESIGN
Weight : Approx. 2500 gms
Case size : 144 sq mm with depth of 232 mm
Installa�on : Flush moun�ng
Panel cutout : 138 X 138 mm

STANDARD COMPLIANCE
Accuracy test : IEC 60255-3
Insula�on test : IEC 60255-5

[email protected], www.jvselectronics.in
Four Pole, Non-Directional, IDMT 3 O/C + 1 E/F Relay With
Inst. Highset For Both O/C And E/F Elements
JRC 068

TERMINAL DIAGRAM

ORDERING INFORMATION
Relay Type : JRC 068
Current ra�ng : 1A or 5A
Aux Supply : 1) 20-60V DC
: 2) 75 – 150V AC / DC
: 3)175 – 300V DC / 185 – 250V AC

[email protected], www.jvselectronics.in

You might also like