LOAD CALCULATIONS

REFERENCE

Unit weight of Concrete 25 kN/m³

Unit weight of brick (IS 875 Part-1, - 1987 ) 18 kN/m³
Unit weight of weathering course 24 kN/m³
Unit weight of floor finish 20 kN/m³
Unit weight of cement plaster 20.4 kN/m³

2.0 DEAD LOAD CALCULATION (DL)

A) Load on roof slab
Slab Thickness = 0.150 m
Weathering course Thickness = 0.100 m
a) Self weight of roof slab = 0.125*25 3.750 kN/m2
b) Weight of the finishes over roof slab for water proofing = 0.1*24 2.4 kN/m2
Total Dead Load on roof slab = 6.15 kN/m2

B) Load on floor slab

Slab Thickness = 0.150 m
Flloor finish = 0.0125 m
a) Self weight of roof slab = 3.750 kN/m2
b) weight of floor finish = 0.3 kN/m2
Total Dead Load on roof slab = 4.00 kN/m2

C) Load on Plinth beams

Depth of Beam = 0.3 m
Height of Wall (from FFL to top of tie beam) = 3.15 m
Height of Wall (from FFL to bottom of tie beam) 2.85
Wall thickness = 0.23 m
Plaster thickness (12mm in inner side & 18mm outer side) = 0.030 m
a) Brick wall load = (3.15)*0.23*18 11.799 kN/m
b) Plaster load = (3.15)*0.03*20. 1.928 kN/m
Total load on plinth beams = 4 13.7 kN/m
15% Reduction due to door/window = 11.7 kN/m

D) Load on Plinth beams

Depth of Beam = 0.30 m
Height of Wall (from FFL to top of tie beam) = 3.15 m
Height of Wall (from FFL to bottom of tie beam) 2.85
Wall thickness = 0.15 m
Plaster thickness (12mm in inner side & 18mm outer side) = 0.030 m
a) Brick wall load = 7.695 kN/m
b) Plaster load = 1.928 kN/m
Total load on plinth beams = 9.6 kN/m
15% Reduction due to door/window = 8.2 kN/m

E) Load on roof beam

Height of Wall (considered max. ht.) = 1 m
Wall thickness = 0.15 m
Plaster thickness (12mm in inner side & 18mm outer side) = 0.030 kN/m
a) Brick wall load = 5.400 kN/m
b) Plaster load = 1.224 kN/m
Total Brick wall load 6.6

F) Load on mumty beam

Height of Wall (considered max. ht.) = 0.45 m
Wall thickness = 0.15 m
Plaster thickness (12mm in inner side & 18mm outer side) = 0.030 kN/m
a) Brick wall load = 2.430 kN/m
b) Plaster load = 1.224 kN/m
Total Brick wall load 3.7
 WIND LOAD (WL)

Length (o/o) = 20.85 m

Width (o/o) = 9.95 m
Clear eave hight = 6.30 m
DEAD LOAD (DL) CALCULATION

WIND LOAD (WL)

Basic wind speed (Vb) = 47 m/s
Design wind speed (Vz) = Vbxk1xk2xk3XK4
= 60.725175 m/s
where,
k1 = probability factor (risk coefficient)
= 1.07
k2 = terrain, height and structure size factor
= 1.05
k3 = topography factor
= 1
k4. = Importance factor for cyclonic region k4
= 1.15 Structure of post- cyclone importance for emergency services 1.3
(such as cyclone shelter, hospitals, schools, communications towers,etc)
Industrial structures 1.15
All others buildings 1
1.09

Wind pressure (Pz) at heght z = 0.6xVz²

= 2.21 KN/m²
Where
Design wind pressure (Pd) = KdxKaxKcxPz > 0.7xPz Kd = Wind directionality factor 0.9
1.79 KN/m² 1.79 1.54877 Ka = Area averaging factor 1.00
Kc = Combination factor 0.9

PRESURE COEFFICIENTS:~
Encloser condition of the building = Semi closed
Internal pressure coeff.(Cpi) = 0.50 Enclosed 0.2
Semi closed 0.5
h/w = 0.63 OPEN 0.7
= 1/2<h/w<=3/2
l/w = 2.10
= 3/2<=l/w<4
External pressure coeff.(Cpe) for Wall From "Table 5" IS 875 Part 3:
Coeff. For Wall
Wind Side A B C D
0 degree 0.70 -0.30 -0.70 -0.70
90 degree -0.50 -0.50 0.70 -0.10

WIND LOAD:
C/C dist. b/w "A" & "B" = 4.150 m
C/C dist. b/w "B" & "C" = 4.250 m
C/C dist. b/w "C" & "D" = 3.930 m
C/C dist. b/w "D" & "E" = 4.370 m
C/C dist. b/w "E" & "F" = 4.150 m

C/C dist. b/w "1" & "2" = 3.73 m

C/C dist. b/w "2" & "3" = 2.45 m
C/C dist. b/w "3" & "4" = 3.815 m
 WX+(+cpi)
WALLS
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) -1.00 (Cpe-Cpi) -1.00

Force on Column on Grid "A" = -3.72 kN/m Force on Column on Grid "A" = -3.72 kN/m
Force on Column on Grid "B" = -7.53 kN/m Force on Column on Grid "B" = -7.53 kN/m
Force on Column on Grid "C" = -7.33 kN/m Force on Column on Grid "C" = -7.33 kN/m
Force on Column on Grid "D" = -7.44 kN/m Force on Column on Grid "D" = -7.44 kN/m
Force on Column on Grid "E" = -7.63 kN/m Force on Column on Grid "E" = -7.63 kN/m
Force on Column on Grid "F" = -3.72 kN/m Force on Column on Grid "F" = -3.72 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m

LOAD ON WALL "C" LOAD ON WALL "D"

(Cpe-Cpi) 0.20 (Cpe-Cpi) -0.60

Force on Column on Grid "1" = 0.67 kN/m Force on Column on Grid "1" = -2.01 kN/m
Force on Column on Grid "2" = 1.11 kN/m Force on Column on Grid "2" = -3.32 kN/m
Force on Column on Grid "3" = 1.12 kN/m Force on Column on Grid "3" = -3.37 kN/m
Force on Column on Grid "4" = 0.68 kN/m Force on Column on Grid "4" = -2.05 kN/m

WX+(-cpi)
WALLS
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) 0.00 (Cpe-Cpi) 0.00

Force on Column on Grid "A" = 0.00 kN/m Force on Column on Grid "A" = 0.00 kN/m
Force on Column on Grid "B" = 0.00 kN/m Force on Column on Grid "B" = 0.00 kN/m
Force on Column on Grid "C" = 0.00 kN/m Force on Column on Grid "C" = 0.00 kN/m
Force on Column on Grid "D" = 0.00 kN/m Force on Column on Grid "D" = 0.00 kN/m
Force on Column on Grid "E" = 0.00 kN/m Force on Column on Grid "E" = 0.00 kN/m
Force on Column on Grid "F" = 0.00 kN/m Force on Column on Grid "F" = 0.00 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m

LOAD ON WALL "C" LOAD ON WALL "D"

(Cpe-Cpi) 1.20 (Cpe-Cpi) 0.40

Force on Column on Grid "1" = 4.01 kN/m Force on Column on Grid "1" = 1.34 kN/m
Force on Column on Grid "2" = 6.65 kN/m Force on Column on Grid "2" = 2.22 kN/m
Force on Column on Grid "3" = 6.74 kN/m Force on Column on Grid "3" = 2.93 kN/m
Force on Column on Grid "4" = 4.10 kN/m Force on Column on Grid "4" = 1.37 kN/m
ROOF AT "H" ROOF AT "L"
(Cpe-Cpi) 0.00 (Cpe-Cpi) 0.00

Force on Roof on Grid "A" = 0.00 kN/m Force on Roof on Grid "A" = 0.00 kN/m
Force on Roof on Grid "B" = 0.00 kN/m Force on Roof on Grid "B" = 0.00 kN/m
Force on Roof on Grid "C" = 0.00 kN/m Force on Roof on Grid "C" = 0.00 kN/m
Force on Roof on Grid "D" = 0.00 kN/m Force on Roof on Grid "D" = 0.00 kN/m
Force on Roof on Grid "E" = 0.00 kN/m Force on Roof on Grid "E" = 0.00 kN/m
Force on Roof on Grid "F" = 0.00 kN/m Force on Roof on Grid "F" = 0.00 kN/m
Force on Roof on Grid "G" = 0.00 kN/m Force on Roof on Grid "G" = 0.00 kN/m
Force on Roof on Grid "H" = 0.00 kN/m Force on Roof on Grid "H" = 0.00 kN/m

"-WX+CPI"
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) -1.00 (Cpe-Cpi) -1.00

Force on Column on Grid "A" = -3.72 kN/m Force on Column on Grid "A" = -3.72 kN/m
Force on Column on Grid "B" = -7.53 kN/m Force on Column on Grid "B" = -7.53 kN/m
Force on Column on Grid "C" = -7.33 kN/m Force on Column on Grid "C" = -7.33 kN/m
Force on Column on Grid "D" = -7.44 kN/m Force on Column on Grid "D" = -7.44 kN/m
Force on Column on Grid "E" = -7.63 kN/m Force on Column on Grid "E" = -7.63 kN/m
Force on Column on Grid "F" = -3.72 kN/m Force on Column on Grid "F" = -3.72 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m

LOAD ON WALL "C" LOAD ON WALL "C"

(Cpe-Cpi) -0.60 (Cpe-Cpi) 0.20
Force on Column on Grid "1" = -2.01 kN/m Force on Column on Grid "1" = 0.67 kN/m
Force on Column on Grid "2" = -3.32 kN/m Force on Column on Grid "2" = 1.11 kN/m
Force on Column on Grid "3" = -3.37 kN/m Force on Column on Grid "3" = 1.12 kN/m
Force on Column on Grid "4" = -2.05 kN/m Force on Column on Grid "4" = 0.68 kN/m
"-WX-CPI"
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) 0.00 (Cpe-Cpi) 0.00

Force on Column on Grid "A" = 0.00 kN/m Force on Column on Grid "A" = 0.00 kN/m
Force on Column on Grid "B" = 0.00 kN/m Force on Column on Grid "B" = 0.00 kN/m
Force on Column on Grid "C" = 0.00 kN/m Force on Column on Grid "C" = 0.00 kN/m
Force on Column on Grid "D" = 0.00 kN/m Force on Column on Grid "D" = 0.00 kN/m
Force on Column on Grid "E" = 0.00 kN/m Force on Column on Grid "E" = 0.00 kN/m
Force on Column on Grid "F" = 0.00 kN/m Force on Column on Grid "F" = 0.00 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m
LOAD ON WALL "C" LOAD ON WALL "C"
(Cpe-Cpi) 0.40 (Cpe-Cpi) 1.20
Force on Column on Grid "1" = 1.34 kN/m Force on Column on Grid "1" = 4.01 kN/m
Force on Column on Grid "2" = 2.22 kN/m Force on Column on Grid "2" = 6.65 kN/m
Force on Column on Grid "3" = 2.25 kN/m Force on Column on Grid "3" = 6.74 kN/m
Force on Column on Grid "4" = 1.37 kN/m Force on Column on Grid "4" = 4.10 kN/m
WZ+(+cpi)
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) 0.20 (Cpe-Cpi) -0.80
Force on Column on Grid "A" = 0.74 kN/m Force on Column on Grid "A" = -2.97 kN/m
Force on Column on Grid "B" = 1.51 kN/m Force on Column on Grid "B" = -6.02 kN/m
Force on Column on Grid "C" = 1.47 kN/m Force on Column on Grid "C" = -5.86 kN/m
Force on Column on Grid "D" = 1.49 kN/m Force on Column on Grid "D" = -5.95 kN/m
Force on Column on Grid "E" = 1.53 kN/m Force on Column on Grid "E" = -6.11 kN/m
Force on Column on Grid "F" = 0.74 kN/m Force on Column on Grid "F" = -2.97 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m
LOAD ON WALL "C" LOAD ON WALL "D"
(Cpe-Cpi) -1.20 (Cpe-Cpi) -1.20
Force on Column on Grid "1" = -4.01 kN/m Force on Column on Grid "1" = -4.01 kN/m
Force on Column on Grid "2" = -6.65 kN/m Force on Column on Grid "2" = -6.65 kN/m
Force on Column on Grid "3" = -6.74 kN/m Force on Column on Grid "3" = -6.74 kN/m
Force on Column on Grid "4" = -4.10 kN/m Force on Column on Grid "4" = -4.10 kN/m

WZ+(-cpi)
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) 1.20 (Cpe-Cpi) 0.20
Force on Column on Grid "A" = 4.46 kN/m Force on Column on Grid "A" = 0.74 kN/m
Force on Column on Grid "B" = 9.03 kN/m Force on Column on Grid "B" = 1.51 kN/m
Force on Column on Grid "C" = 8.80 kN/m Force on Column on Grid "C" = 1.47 kN/m
Force on Column on Grid "D" = 8.92 kN/m Force on Column on Grid "D" = 1.49 kN/m
Force on Column on Grid "E" = 9.16 kN/m Force on Column on Grid "E" = 1.53 kN/m
Force on Column on Grid "F" = 4.46 kN/m Force on Column on Grid "F" = 0.74 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m
LOAD ON WALL "C" LOAD ON WALL "D"
(Cpe-Cpi) -0.20 (Cpe-Cpi) -0.20
Force on Column on Grid "1" = -0.67 kN/m Force on Column on Grid "1" = -0.67 kN/m
Force on Column on Grid "2" = -1.11 kN/m Force on Column on Grid "2" = -1.11 kN/m
Force on Column on Grid "3" = -1.12 kN/m Force on Column on Grid "3" = -1.12 kN/m
Force on Column on Grid "4" = -0.68 kN/m Force on Column on Grid "4" = -0.68 kN/m

WZ-+(CPI)
LOAD ON WALL "A" LOAD ON WALL "B"
(Cpe-Cpi) -0.80 (Cpe-Cpi) 0.20
Force on Column on Grid "A" = -2.97 kN/m Force on Column on Grid "A" = 0.74 kN/m
Force on Column on Grid "B" = -6.02 kN/m Force on Column on Grid "B" = 1.51 kN/m
Force on Column on Grid "C" = -5.86 kN/m Force on Column on Grid "C" = 1.47 kN/m
Force on Column on Grid "D" = -5.95 kN/m Force on Column on Grid "D" = 1.49 kN/m
Force on Column on Grid "E" = -6.11 kN/m Force on Column on Grid "E" = 1.53 kN/m
Force on Column on Grid "F" = -2.97 kN/m Force on Column on Grid "F" = 0.74 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m
LOAD ON WALL "C" LOAD ON WALL "D"
(Cpe-Cpi) -1.20 (Cpe-Cpi) -1.20

Force on Column on Grid "1" = -4.01 kN/m Force on Column on Grid "1" = -4.01 kN/m
Force on Column on Grid "2" = -6.65 kN/m Force on Column on Grid "2" = -6.65 kN/m
Force on Column on Grid "3" = -6.74 kN/m Force on Column on Grid "3" = -6.74 kN/m
Force on Column on Grid "4" = -4.10 kN/m Force on Column on Grid "4" = -4.10 kN/m

WZ--(CPI)

LOAD ON WALL "A" LOAD ON WALL "B"

(Cpe-Cpi) 0.20 (Cpe-Cpi) 1.20
Force on Column on Grid "A" = 0.74 kN/m Force on Column on Grid "A" = 4.46 kN/m
Force on Column on Grid "B" = 1.51 kN/m Force on Column on Grid "B" = 9.03 kN/m
Force on Column on Grid "C" = 1.47 kN/m Force on Column on Grid "C" = 8.80 kN/m
Force on Column on Grid "D" = 1.49 kN/m Force on Column on Grid "D" = 8.92 kN/m
Force on Column on Grid "E" = 1.53 kN/m Force on Column on Grid "E" = 9.16 kN/m
Force on Column on Grid "F" = 0.74 kN/m Force on Column on Grid "F" = 4.46 kN/m
Force on Column on Grid "G" = 0.00 kN/m Force on Column on Grid "G" = 0.00 kN/m
Force on Column on Grid "H" = 0.00 kN/m Force on Column on Grid "H" = 0.00 kN/m
LOAD ON WALL "C" LOAD ON WALL "D"
(Cpe-Cpi) -0.20 (Cpe-Cpi) -0.20

Force on Column on Grid "1" = -0.67 kN/m Force on Column on Grid "1" = -0.67 kN/m
Force on Column on Grid "2" = -1.11 kN/m Force on Column on Grid "2" = -1.11 kN/m
Force on Column on Grid "3" = -1.12 kN/m Force on Column on Grid "3" = -1.12 kN/m
Force on Column on Grid "4" = -0.68 kN/m Force on Column on Grid "4" = -0.68 kN/m
Note:
1) -Ve value means, load applied
away from structure and vice-versa.
Seismic parameters considered are:
Zone = 0.3 (Zone factor for zone
RF = 5.0 (Response reduction
I = 1.5 (Importance factor)
SS = 1 (Soil type)
Damping = 0.05
Height of the building = 6.3 m
Width of the building = 9.95 m
Length of the building = 20.85 m
Fundamental natural ( As per cl. 6.2 IS
period of vibration Ta 0.09 h/ √d 1893 Part-1 : 2016 )
where, d is the base dimension of the building at the plinth
h = height of the building
Time Period in X, Ta (0.09xh)/√20.85 = 0.124 sec.
Time Period in Z, Ta (0.09xh)/√9.95= 0.179sec.
Staad 3D Model
Foundation Design

Support Node No
Plinth Beam and Column
Design

Beam Node No
 Plinth Beam Section Size

Plinth Beam Force Summary

Column Section Size

Column No
Column Forces Summary
 Support Reaction For F1 Grouping
Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m My kN-m Mz kN-m
166 101 1DL+1LL 0.264 427.792 -2.668 -2.306 0.007 -0.296
166 102 1DL+1WL +X -7.476 375.945 -2.654 -2.403 0.007 10.983
166 103 1DL+1WL -X 7.72 371.287 -2.47 -2.102 -0.02 -11.338
166 104 1DL+1WL +Z 0.106 394.104 -13.86 -20.395 0.224 -0.11
166 105 1DL+1WL -Z 0.065 352.535 8.2 15.885 -0.255 -0.075
166 106 1DL+1EQL +X -37.5 388.0 -3.0 -2.9 -0.1 55.7
166 107 1DL+1EQL -X 37.8 359.4 -2.1 -1.4 0.1 -56.0
166 108 1DL+1EQL +Z 0.314 447.702 -30.802 -48.817 0.452 -0.384
166 109 1DL+1EQL -Z -0.052 299.775 25.769 44.462 -0.44 0.067
166 110 1DL+.8LL+.8WL+X -5.848 418.746 -2.748 -2.461 0.007 8.645
166 111 1DL+.8LL+.8WL -X 6.309 415.019 -2.601 -2.22 -0.014 -9.211
166 112 1DL+.8LL+.8WL+Z 0.217 433.273 -11.713 -16.854 0.181 -0.229
166 113 1DL+.8LL+.8WL -Z 0.185 400.018 5.935 12.17 -0.202 -0.201
166 114 1DL+.8LL+.8EQL +X -29.885 428.417 -2.993 -2.864 -0.1 44.438
166 115 1DL+.8LL+.8EQL -X 30.36 405.545 -2.283 -1.697 0.113 -44.975
166 116 1DL+.8LL+.8EQL+Z 0.384 476.152 -25.266 -39.592 0.363 -0.449
166 117 1DL+.8LL+.8EQL -Z 0.091 357.81 19.99 35.032 -0.35 -0.088
172 101 1DL+1LL -0.315 406.054 3.73 3.267 0.015 0.273
172 102 1DL+1WL +X -6.816 363.818 3.525 2.992 -0.087 9.78
172 103 1DL+1WL -X 6.935 359.765 3.707 3.291 0.059 -10.391
172 104 1DL+1WL +Z -0.314 341.227 -6.834 -14.419 0.241 0.273
172 105 1DL+1WL -Z -0.259 383.991 15.375 21.991 -0.242 0.213
172 106 1DL+1EQL +X -34.402 375.061 3.214 2.484 -0.13 50.84
172 107 1DL+1EQL -X 33.762 349.306 4.109 3.949 0.154 -50.256
172 108 1DL+1EQL +Z -0.471 286.664 -24.825 -43.603 0.46 0.488
172 109 1DL+1EQL -Z -0.2 437.7 32.1 50.0 -0.4 0.1
172 110 1DL+.8LL+.8WL+X -5.513 398.588 3.607 3.077 -0.065 7.867
172 111 1DL+.8LL+.8WL -X 5.488 395.345 3.752 3.316 0.052 -8.269
172 112 1DL+.8LL+.8WL+Z -0.311 380.514 -4.681 -10.852 0.198 0.261
172 113 1DL+.8LL+.8WL -Z -0.268 414.726 13.086 18.276 -0.189 0.214
172 114 1DL+.8LL+.8EQL +X -27.582 407.581 3.358 2.67 -0.099 40.715
172 115 1DL+.8LL+.8EQL -X 26.949 386.978 4.074 3.843 0.129 -40.162
172 116 1DL+.8LL+.8EQL+Z -0.437 336.864 -19.074 -34.199 0.373 0.434
172 117 1DL+.8LL+.8EQL -Z -0.195 457.696 26.506 40.712 -0.344 0.12
174 101 1DL+1LL -0.219 446.051 -2.503 -2.2 0.001 0.177
174 102 1DL+1WL +X -7.517 389.846 -2.402 -2.132 0.007 11.013
174 103 1DL+1WL -X 7.185 396.899 -2.339 -2.03 -0.034 -10.856
174 104 1DL+1WL +Z -0.321 418.143 -14.769 -22.028 0.056 0.308
174 105 1DL+1WL -Z -0.309 364.644 9.711 18.244 -0.1 0.279
174 106 1DL+1EQL +X -37.009 369.835 -2.507 -2.306 -0.115 55.32
174 107 1DL+1EQL -X 36.47 416.332 -2.217 -1.829 0.115 -54.865
174 108 1DL+1EQL +Z -0.1 494.9 -33.2 -53.0 0.2 0.1
174 109 1DL+1EQL -Z -0.4 291.232 28.487 48.905 -0.211 0.391
174 110 1DL+.8LL+.8WL+X -6.027 432.868 -2.506 -2.225 0.006 8.816
174 111 1DL+.8LL+.8WL -X 5.735 438.51 -2.456 -2.144 -0.026 -8.679
174 112 1DL+.8LL+.8WL+Z -0.27 455.505 -12.4 -18.142 0.046 0.252
174 113 1DL+.8LL+.8WL -Z -0.261 412.706 7.184 14.076 -0.079 0.228
174 114 1DL+.8LL+.8EQL +X -29.62 416.859 -2.59 -2.364 -0.091 44.261
174 115 1DL+.8LL+.8EQL -X 29.163 454.056 -2.359 -1.983 0.093 -43.887
174 116 1DL+.8LL+.8EQL+Z -0.124 516.938 -27.154 -42.952 0.169 0.057
174 117 1DL+.8LL+.8EQL -Z -0.333 353.976 22.205 38.604 -0.168 0.318
180 101 1DL+1LL 1 402.15 2.912 2.525 -0.005 -0.841
180 102 1DL+1WL +X -5.293 358.59 2.823 2.434 -0.078 8.431
180 103 1DL+1WL -X 8.03 361.202 2.888 2.539 0.048 -11.344
180 104 1DL+1WL +Z 0.932 335.781 -8.713 -16.888 0.026 -0.8
180 105 1DL+1WL -Z 0.918 385.867 15.984 23.57 -0.101 -0.781
180 106 1DL+1EQL +X -32.458 351.883 2.714 2.257 -0.135 49.174
180 107 1DL+1EQL -X 34.239 367.588 3.013 2.743 0.124 -50.657
180 108 1DL+1EQL +Z 0.812 273.895 -28.337 -48.784 0.184 -0.626
180 109 1DL+1EQL -Z 1.0 445.6 34.1 53.8 -0.2 -0.9
180 110 1DL+.8LL+.8WL+X -3.968 392.75 2.87 2.467 -0.063 6.517
180 111 1DL+.8LL+.8WL -X 6.69 394.84 2.922 2.551 0.038 -9.303
180 112 1DL+.8LL+.8WL+Z 1.011 374.503 -6.359 -12.991 0.02 -0.868
180 113 1DL+.8LL+.8WL -Z 1 414.572 13.398 19.376 -0.082 -0.852
180 114 1DL+.8LL+.8EQL +X -25.701 387.385 2.782 2.326 -0.109 39.112
180 115 1DL+.8LL+.8EQL -X 27.657 399.949 3.022 2.714 0.098 -40.753
180 116 1DL+.8LL+.8EQL+Z 0.915 324.994 -22.058 -38.508 0.146 -0.729
180 117 1DL+.8LL+.8EQL -Z 1.041 462.34 27.863 43.547 -0.157 -0.913
182 101 1DL+1LL 0.35 451.984 -2.398 -2.068 -0.006 -0.288
182 102 1DL+1WL +X -6.799 402.067 -2.206 -1.854 0.006 10.378
182 103 1DL+1WL -X 7.857 394.191 -2.267 -1.954 -0.035 -11.449
182 104 1DL+1WL +Z 0.32 421.53 -14.567 -21.721 -0.09 -0.22
182 105 1DL+1WL -Z 0.405 369.602 9.878 18.481 0.081 -0.335
182 106 1DL+1EQL +X -36.215 423.681 -2.092 -1.667 -0.118 54.648
182 107 1DL+1EQL -X 37.018 372.531 -2.416 -2.199 0.109 -55.321
182 108 1DL+1EQL +Z 0.4 500.2 -33.2 -53.1 -0.2 -0.4
182 109 1DL+1EQL -Z 0.403 296.008 28.715 49.242 0.171 -0.308
182 110 1DL+.8LL+.8WL+X -5.4 444.377 -2.33 -1.978 0.003 8.274
182 111 1DL+.8LL+.8WL -X 6.325 438.077 -2.379 -2.058 -0.03 -9.188
182 112 1DL+.8LL+.8WL+Z 0.296 459.948 -12.219 -17.871 -0.074 -0.205
182 113 1DL+.8LL+.8WL -Z 0.364 418.406 7.337 14.29 0.063 -0.296
182 114 1DL+.8LL+.8EQL +X -28.933 461.669 -2.239 -1.828 -0.096 43.69
182 115 1DL+.8LL+.8EQL -X 29.654 420.749 -2.499 -2.254 0.085 -44.285
182 116 1DL+.8LL+.8EQL+Z 0.4 522.9 -27.1 -43.0 -0.1 -0.3
182 117 1DL+.8LL+.8EQL -Z 0.361 359.53 22.406 38.899 0.135 -0.275
188 101 1DL+1LL -0.215 400.908 0.808 0.721 -0.004 0.256
188 102 1DL+1WL +X -6.236 359.097 0.809 0.777 -0.079 9.256
188 103 1DL+1WL -X 7.047 355.9 0.745 0.674 0.054 -10.485
188 104 1DL+1WL +Z -0.049 334.856 -10.692 -18.492 -0.076 0.076
188 105 1DL+1WL -Z -0.096 383.76 13.934 21.863 0.079 0.146
188 106 1DL+1EQL +X -33.345 367.447 0.925 0.965 -0.133 49.98
188 107 1DL+1EQL -X 33.141 347.798 0.592 0.425 0.126 -49.669
188 108 1DL+1EQL +Z -0.147 271.643 -30.52 -50.754 -0.165 0.222
188 109 1DL+1EQL -Z -0.057 443.602 32.037 52.144 0.158 0.089
188 110 1DL+.8LL+.8WL+X -5.099 393.431 0.839 0.781 -0.064 7.517
188 111 1DL+.8LL+.8WL -X 5.527 390.873 0.788 0.698 0.042 -8.276
188 112 1DL+.8LL+.8WL+Z -0.15 374.038 -8.362 -14.634 -0.062 0.173
188 113 1DL+.8LL+.8WL -Z -0.187 413.161 11.339 17.65 0.062 0.228
188 114 1DL+.8LL+.8EQL +X -26.787 400.11 0.931 0.932 -0.107 40.095
188 115 1DL+.8LL+.8EQL -X 26.402 384.392 0.665 0.499 0.099 -39.623
188 116 1DL+.8LL+.8EQL+Z -0.228 323.467 -24.225 -40.443 -0.133 0.289
188 117 1DL+.8LL+.8EQL -Z -0.156 461.034 25.821 41.874 0.125 0.183
190 101 1DL+1LL -0.391 433.111 -2.499 -2.102 -0.003 0.416
190 102 1DL+1WL +X -7.597 375.288 -2.217 -1.759 -0.004 11.093
190 103 1DL+1WL -X 7.555 380.816 -2.4 -2.061 -0.031 -11.188
190 104 1DL+1WL +Z -0.368 397.774 -13.507 -19.879 -0.227 0.43
190 105 1DL+1WL -Z -0.236 357.013 8.414 16.171 0.258 0.256
190 106 1DL+1EQL +X -37.8 361.5 -1.9 -1.3 -0.1 56.1
190 107 1DL+1EQL -X 37.3 395.0 -2.8 -2.7 0.1 -55.5
190 108 1DL+1EQL +Z -0.32 452.559 -30.852 -48.961 -0.433 0.322
190 109 1DL+1EQL -Z -0.214 303.962 26.158 45.015 0.429 0.253
190 110 1DL+.8LL+.8WL+X -6.23 419.763 -2.365 -1.905 -0.004 9.034
190 111 1DL+.8LL+.8WL -X 5.891 424.185 -2.512 -2.146 -0.026 -8.79
190 112 1DL+.8LL+.8WL+Z -0.447 437.752 -11.397 -16.401 -0.182 0.504
190 113 1DL+.8LL+.8WL -Z -0.342 405.143 6.14 12.439 0.206 0.365
190 114 1DL+.8LL+.8EQL +X -30.401 408.714 -2.121 -1.504 -0.108 45.019
190 115 1DL+.8LL+.8EQL -X 29.668 435.568 -2.816 -2.648 0.103 -44.239
190 116 1DL+.8LL+.8EQL+Z -0.409 481.579 -25.273 -39.666 -0.348 0.418
190 117 1DL+.8LL+.8EQL -Z -0.324 362.702 20.335 35.514 0.343 0.363
196 101 1DL+1LL -0.034 429.189 0.854 0.801 -0.002 0.143
196 102 1DL+1WL +X -6.268 382.533 0.916 0.964 -0.08 9.293
196 103 1DL+1WL -X 7.447 387.234 0.736 0.667 0.063 -10.846
196 104 1DL+1WL +Z 0.048 364.584 -9.484 -16.526 -0.243 0.013
196 105 1DL+1WL -Z -0.072 406.244 12.573 19.639 0.211 0.167
196 106 1DL+1EQL +X -34.028 369.56 1.215 1.461 -0.146 50.602
196 107 1DL+1EQL -X 33.949 399.456 0.358 0.04 0.148 -50.338
196 108 1DL+1EQL +Z 0.003 308.944 -27.944 -46.452 -0.378 0.104
196 109 1DL+1EQL -Z -0.082 460.073 29.517 47.952 0.379 0.16
196 110 1DL+.8LL+.8WL+X -5.018 418.672 0.944 0.962 -0.066 7.47
196 111 1DL+.8LL+.8WL -X 5.954 422.433 0.801 0.724 0.048 -8.642
196 112 1DL+.8LL+.8WL+Z 0.035 404.313 -7.376 -13.03 -0.196 0.046
196 113 1DL+.8LL+.8WL -Z -0.061 437.641 10.27 15.902 0.167 0.168
196 114 1DL+.8LL+.8EQL +X -27.226 408.294 1.183 1.359 -0.119 40.516
196 115 1DL+.8LL+.8EQL -X 27.155 432.211 0.498 0.223 0.117 -40.235
196 116 1DL+.8LL+.8EQL+Z -0.001 359.801 -22.144 -36.971 -0.304 0.118
196 117 1DL+.8LL+.8EQL -Z -0.07 480.704 23.825 38.553 0.301 0.163
10.00 DESIGN OF FOUNDATION
10.10 DESIGN OF ISOLATED FOUNDATION :F1

DATA :
Footing Designation = F1
Column Size : Bx = 0.35 m
By = 0.35 m Material Properties :
2
Loads : Axial Load, P = 523 kN fck = 25 N/mm
2
Moment, Mx = -43 kN.m fy = 500 N/mm
Moment, My = 1 kN.m
Lateral Load, Sx = 1 kN.m
Lateral Load, Sy = -27 kN.m
Net Safe Bearing Capacity of Soil = 120 kN/m2 at 3.0 m depth
Safe Bearing Capacity of Soil = = 180 kN/m2
Safe Bearing Capacity of Soil in EQ Case = 225 kN/m2
Depth of Foundation = 3 m
Unit Weight of Soil = 20 kN/m3
Unit Weight of Concrete = 25 kN/m3
Clear Cover to concrete = 50 mm
PCC Thickness = 100 mm Thk.

PROPORTIONING OF BASE SIZE :

Provide the dimensions of footing as follow :
Lx = 2.5 m
Ly = 2.5 m OK
Thickness of footing D = 0.50 m d1 = 0.50 m
d = 0.50 m check for taperd footing
Total axial load including self-weight of footing & soil weight above top of footing .

Axial Load, P = 907.5 kN

Moment, Mx = -43 kN.m My
Moment, My = 1 kN.m Y

By
X
Ly
P Mx

Bx

LX

d d

d
d1
Factored values of loads :
Load Factor = 1.5
Axial Load, P = 784.5 kN
Moment, Mx = -64.5 kN.m
Moment, My = 1.5 kN.m

PRESSURE DISTRIBUTION AT BASE :

2
161 ** Y 162 ** 150.86 kN/m

150 151
2 162 kN/m2
X 150.9 kN/m

100.2 101 1.08 m 151 kN/m2

128 ** 129 **
2
150 kN/m
149.7
kN/m2 151 kN/m
2

1.08 m

**Values of Base Pressure due to load intensity including self weight for SBC check

Total downward load

Weight of soil = 306.4 kN

Weight of Column = 0 kN (Already Considered in STAAD)
Weight of Footing = 78.13 kN

Total downward load= 384.5 kN

Check for overturning

Overturning check about x axis
Mo = -43 + -27 x 3 = 124 kN-m
MR = 384.5 x 1.25 + 523 x 1.25
= 1134.375 kN-m
FOS = 9.1482 > 1.5 Safe
Overturning check about y axis
Mo = 1 + 1 x 3 = 4 kN-m
MR = 384.5 x 1.25 + 523 x 1.25
= 1134.375 kN-m
FOS = 283.59375 > 1.5 Safe

Check for sliding

Total resulatant horizontal force= SQRT(Sx^2+Sz^2) = 27.02 kN µ= 0.45

15.115 > 1.5 OK

Design Coefficients:-

xumax/d = 0.46
j = 0.807
R = 3.325
Design of section :

Across the axis X : Distribution Reinforcement Across the axis Y : Main Reinforcement

B.M. at face of column = 87 kN.m B.M. at face of column = 87 kN.m

Effective depth required = 0.162 m Effective depth required = 0.162 m

Provided total depth = 0.5 m Provided total depth = 0.50 m

Effective depth, dx = 0.432 m OK Effective depth, dy = 0.44 m OK

REINFORCEMENT AT BOTTOM :

Reinforcement Along the Axis X : Reinforcement Along the Axis Y :

Section at face of column : Section at face of column :

Bending moment = 87 kN.m Bending moment = 87 kN.m
2 2
Area of steel required = 574.33 mm Area of steel required = 559 mm
2 2
Min steel requried (0.12%) = 600 mm Min steel requried (0.12%) = 600 mm

Required reinforcement along x direction = 600 mm2

Required 12 mm dia @ 188 mm c/c
Provided 12 mm dia @ 125 mm c/c = 904.32 mm2 OK

Required reinforcement along y direction = 600 mm2

Required 12 mm dia @ 188 mm c/c
Provided 12 mm dia @ 125 mm c/c = 904.32 mm2 OK

CHECK FOR PUNCHING SHEAR :

2
Average presure intensity = 126 kN/m

The critical section for punching shear is at distance equal to half effective depth distance from
face of column.

Punching shear force = 708 kN

Depth of section = 0.50 m
Efffective depth of section = 0.44 m
Shear stress = 0.51 N/mm2
0.22

0.782 m

2.50 m

0.22

0.782 m

2.50 m

Permissible punching shear stress

= k s x tc
where, ks = 1.00
tc = 1.25 N/mm2
> 0.51. Hence, Safe against punching shear
CHECK FOR ONE-WAY SHEAR :

The critical section for one way shear is at distance equal to effective depth distance from face
of column.

Across the axis X Across the axis Y

Distance of section from face of column = 0.432 m = 0.444 m

Length of projection = 0.643 m = 0.631 m
Max. pressure intensity = 150.9 kN/m2 = 150.9 kN/m
2

Pressure intensity at the section = 150.6 kN/m2 = 150.9 kN/m

2

Bending moment = 31.2 kN.m = 30.0 kN.m

Shear force = 97 kN = 95 kN
Effective depth of section = 0.432 m = 0.444 m
2
Shear stress = 224 kN/m = 214 kN/m2
2 2
= 0.224 N/mm = 0.214 N/mm
Percentage of reinforcement provided = 0.209 % 0.204 %
Permissible shear stress, τc = 0.337 N/mm2 OK 0.333 N/mm
2
OK
(From Table - 19 of IS 456 : 2000 )

CHECK FOR ONE-WAY SHEAR ON SLOPE FOOTING

One-way shear force = 216.9 kN = 216.9 kN

Area of truncate rectangle = 1.3 m2 = 1.3 m2
The shear stress = 166.8 kN/m2 = 166.8 kN/m2
= 0.167 N/mm2 OK = 0.167 OK

Summary :

Column Size : Bx x By = 350 x 350 mm

Footing Size : Lx x Ly = 2500 x 2500 mm
Depth of footing :Df = 0.500 m

Footing Reinforcement :
Reinforcement Along Lx = 12 dia bar @ 125 mm c/c
Reinforcement Along Ly = 12 dia bar @ 125 mm c/c

Y
350

X
2500

350

100 mm P.C.C.
100 mm P.C.C. 2500

12 dia bar @
125 mm c/c

0.500
100 mm P.C.C.

12 dia bar @ 125 mm c/c

 Support Reaction For F2 Grouping
Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m My kN-m Mz kN-m
158 101 1DL+1LL 3.129 261.048 -3.187 -2.74 -0.003 -2.863
158 102 1DL+1WL +X -2.162 225.316 -3.457 -3.238 0.03 6.327
158 103 1DL+1WL -X 9.185 247.76 -3.003 -2.5 -0.049 -12.646
158 104 1DL+1WL +Z 3.226 252.689 -11.971 -16.982 0.201 -2.89
158 105 1DL+1WL -Z 3.189 218.913 5.362 11.456 -0.243 -2.851
158 106 1DL+1EQL +X -25.779 168.309 -4.236 -4.504 -0.187 45.341
158 107 1DL+1EQL -X 32.262 303.746 -1.992 -0.859 0.184 -51.195
158 108 1DL+1EQL +Z 3.363 297.682 -27.771 -43.242 0.374 -3.105
158 109 1DL+1EQL -Z 3.12 174.374 21.543 37.879 -0.376 -2.748
158 110 1DL+.8LL+.8WL+X -1.171 247.475 -3.447 -3.174 0.023 4.527
158 111 1DL+.8LL+.8WL -X 7.906 265.43 -3.083 -2.583 -0.041 -10.651
158 112 1DL+.8LL+.8WL+Z 3.139 269.373 -10.259 -14.169 0.159 -2.846
158 113 1DL+.8LL+.8WL -Z 3.109 242.352 3.608 8.582 -0.196 -2.815
158 114 1DL+.8LL+.8EQL +X
-20.065 201.869 -4.07 -4.187 -0.151 35.739
158 115 1DL+.8LL+.8EQL -X26.368 310.219 -2.275 -1.271 0.146 -41.49
158 116 1DL+.8LL+.8EQL+Z 3.249 305.368 -22.898 -35.177 0.298 -3.018
158 117 1DL+.8LL+.8EQL -Z 3.054 206.721 16.553 29.72 -0.303 -2.733
164 101 1DL+1LL 3.478 241.205 4.282 3.834 0.002 -3.089
164 102 1DL+1WL +X -1.113 215.85 3.933 3.266 -0.116 4.793
164 103 1DL+1WL -X 9.137 236.625 4.407 4.03 0.094 -12.334
164 104 1DL+1WL +Z 3.445 208.163 -4.116 -10.145 0.223 -3.049
164 105 1DL+1WL -Z 3.497 243.018 13.303 18.367 -0.223 -3.115
164 106 1DL+1EQL +X -22.885 161.78 3.153 2.003 -0.228 40.669
164 107 1DL+1EQL -X 29.777 288.896 5.422 5.67 0.233 -46.749
164 108 1DL+1EQL +Z 3.322 161.792 -20.505 -36.846 0.372 -2.861
164 109 1DL+1EQL -Z 3.569 288.885 29.079 44.519 -0.367 -3.218
164 110 1DL+.8LL+.8WL+X -0.175 230.441 4 3.378 -0.093 3.186
164 111 1DL+.8LL+.8WL -X 8.025 247.061 4.379 3.989 0.075 -10.515
164 112 1DL+.8LL+.8WL+Z 3.472 224.292 -2.44 -7.35 0.178 -3.087
164 113 1DL+.8LL+.8WL -Z 3.513 252.176 11.495 15.459 -0.178 -3.14
164 114 1DL+.8LL+.8EQL +X
-17.593 187.185 3.375 2.368 -0.182 31.888
164 115 1DL+.8LL+.8EQL -X24.537 288.878 5.19 5.302 0.187 -38.047
164 116 1DL+.8LL+.8EQL+Z 3.373 187.195 -15.551 -28.711 0.297 -2.936
164 117 1DL+.8LL+.8EQL -Z 3.57 288.869 24.116 36.38 -0.293 -3.222
198 101 1DL+1LL -3.095 275.005 -3.171 -2.674 0.01 2.841
198 102 1DL+1WL +X -8.97 260.788 -2.758 -2.063 0.017 12.32
198 103 1DL+1WL -X 2.389 238.296 -3.213 -2.803 -0.063 -6.66
198 104 1DL+1WL +Z -3.287 266.562 -11.765 -16.604 -0.205 3.034
198 105 1DL+1WL -Z -3.178 232.905 5.419 11.589 0.248 2.871
198 106 1DL+1EQL +X -32.229 317.913 -1.985 -0.808 -0.178 51.175
198 107 1DL+1EQL -X 25.822 182.153 -4.213 -4.426 0.193 -45.37
198 108 1DL+1EQL +Z -3.224 311.898 -27.991 -43.564 -0.355 2.916
198 109 1DL+1EQL -Z -3.182 188.167 21.793 38.33 0.371 2.889
198 110 1DL+.8LL+.8WL+X -7.73 278.615 -2.884 -2.22 0.017 10.387
198 111 1DL+.8LL+.8WL -X 1.357 260.622 -3.248 -2.812 -0.047 -4.797
198 112 1DL+.8LL+.8WL+Z -3.184 283.234 -10.09 -13.853 -0.161 2.958
198 113 1DL+.8LL+.8WL -Z -3.097 256.309 3.658 8.702 0.201 2.829
198 114 1DL+.8LL+.8EQL +X
-26.337 324.315 -2.265 -1.216 -0.139 41.471
198 115 1DL+.8LL+.8EQL -X20.104 215.707 -4.048 -4.11 0.158 -35.764
198 116 1DL+.8LL+.8EQL+Z-3.133 319.503 -23.07 -35.421 -0.281 2.864
198 117 1DL+.8LL+.8EQL -Z -3.1 220.518 16.757 30.095 0.3 2.843
204 101 1DL+1LL -3.952 242.531 4.177 3.784 0 3.612
204 102 1DL+1WL +X -8.829 236.205 4.537 4.354 -0.124 11.552
204 103 1DL+1WL -X 1.429 215.36 4.062 3.589 0.087 -5.583
204 104 1DL+1WL +Z -3.843 209.696 -4.052 -9.902 -0.212 3.45
204 105 1DL+1WL -Z -3.935 244.541 13.269 18.41 0.242 3.587
204 106 1DL+1EQL +X -30.264 290.375 5.313 5.609 -0.224 47.287
204 107 1DL+1EQL -X 22.442 163.029 3.059 1.967 0.224 -40.177
204 108 1DL+1EQL +Z -3.891 162.519 -20.915 -37.346 -0.382 3.539
204 109 1DL+1EQL -Z -3.93 290.885 29.286 44.922 0.382 3.571
204 110 1DL+.8LL+.8WL+X -7.879 246.967 4.46 4.237 -0.099 9.998
204 111 1DL+.8LL+.8WL -X 0.328 230.292 4.08 3.625 0.069 -3.709
204 112 1DL+.8LL+.8WL+Z -3.89 225.76 -2.412 -7.168 -0.17 3.517
204 113 1DL+.8LL+.8WL -Z -3.963 253.636 11.446 15.482 0.193 3.626
204 114 1DL+.8LL+.8EQL +X
-25.026 290.303 5.08 5.241 -0.179 38.587
204 115 1DL+.8LL+.8EQL -X17.138 188.427 3.277 2.328 0.179 -31.385
204 116 1DL+.8LL+.8EQL+Z-3.928 188.019 -15.902 -29.123 -0.306 3.588
204 117 1DL+.8LL+.8EQL -Z -3.96 290.711 24.259 36.691 0.305 3.613
10.00 DESIGN OF FOUNDATION
10.10 DESIGN OF ISOLATED FOUNDATION :F2

DATA :
Footing Designation = F2
Column Size : Bx = 0.35 m
By = 0.35 m Material Properties :
2
Loads : Axial Load, P = 324 kN fck = 25 N/mm
2
Moment, Mx = 52 kN.m fy = 500 N/mm
Moment, My = 1 kN.m
Lateral Load, Sx = 1 kN.m
Lateral Load, Sy = 33 kN.m
Net Safe Bearing Capacity of Soil = 120 kN/m2 at 3.0 m depth
Safe Bearing Capacity of Soil = = 180 kN/m2
Safe Bearing Capacity of Soil in EQ Case = 225 kN/m2
Depth of Foundation = 3 m
Unit Weight of Soil = 20 kN/m3
Unit Weight of Concrete = 25 kN/m3
Clear Cover to concrete = 50 mm
PCC Thickness = 100 mm Thk.

PROPORTIONING OF BASE SIZE :

Provide the dimensions of footing as follow :
Lx = 2 m
Ly = 2 m OK
Thickness of footing D = 0.40 m d1 = 0.40 m
d = 0.40 m check for taperd footing
Total axial load including self-weight of footing & soil weight above top of footing .

Axial Load, P = 565.63 kN

Moment, Mx = 52 kN.m My
Moment, My = 1 kN.m Y

By
X
Ly
P Mx

Bx

LX

d d

d
d1
Factored values of loads :
Load Factor = 1.5
Axial Load, P = 486 kN
Moment, Mx = 78 kN.m
Moment, My = 1.5 kN.m

PRESSURE DISTRIBUTION AT BASE :

102 ** Y 103 ** 64.13 kN/m2

62 64
2 181 kN/m2
X 132.9 kN/m

178.9 181 0.83 m 181 kN/m2

180 ** 181 **
2
180 kN/m
178.9
kN/m2 181 kN/m
2

0.83 m

**Values of Base Pressure due to load intensity including self weight for SBC check

Total downward load

Weight of soil = 201.6 kN

Weight of Column = 0 kN (Already Considered in STAAD)
Weight of Footing = 40 kN

Total downward load= 241.6 kN

Check for overturning

Overturning check about x axis
Mo = 52 + 33 x 3 = 151 kN-m
MR = 241.6 x 1.00 + 324 x 1
= 565.63 kN-m
FOS = 3.7459 > 1.5 Safe
Overturning check about y axis
Mo = 1 + 1 x 3 = 4 kN-m
MR = 241.6 x 1 + 324 x 1
= 565.63 kN-m
FOS = 141.4075 > 1.5 Safe

Check for sliding

Total resulatant horizontal force= SQRT(Sx^2+Sz^2) = 33.02 kN µ= 0.45

7.7096 > 1.5 OK

Design Coefficients:-

xumax/d = 0.46
j = 0.807
R = 3.325
Design of section :

Across the axis X : Distribution Reinforcement Across the axis Y : Main Reinforcement

B.M. at face of column = 62 kN.m B.M. at face of column = 56 kN.m

Effective depth required = 0.136 m Effective depth required = 0.130 m

Provided total depth = 0.4 m Provided total depth = 0.40 m

Effective depth, dx = 0.332 m OK Effective depth, dy = 0.34 m OK

REINFORCEMENT AT BOTTOM :

Reinforcement Along the Axis X : Reinforcement Along the Axis Y :

Section at face of column : Section at face of column :

Bending moment = 62 kN.m Bending moment = 56 kN.m
2 2
Area of steel required = 528.11 mm Area of steel required = 465 mm
2 2
Min steel requried (0.12%) = 480 mm Min steel requried (0.12%) = 480 mm

Required reinforcement along x direction = 528.105 mm2

Required 12 mm dia @ 214 mm c/c
Provided 12 mm dia @ 175 mm c/c = 645.94 mm2 OK

Required reinforcement along y direction = 480 mm2

Required 12 mm dia @ 236 mm c/c
Provided 12 mm dia @ 175 mm c/c = 645.94 mm2 OK

CHECK FOR PUNCHING SHEAR :

2
Average presure intensity = 122 kN/m

The critical section for punching shear is at distance equal to half effective depth distance from
face of column.

Punching shear force = 429 kN

Depth of section = 0.40 m
Efffective depth of section = 0.34 m
Shear stress = 0.46 N/mm2
0.17

0.682 m

2.00 m

0.17

0.682 m

2.00 m

Permissible punching shear stress

= k s x tc
where, ks = 1.00
tc = 1.25 N/mm2
> 0.46. Hence, Safe against punching shear
CHECK FOR ONE-WAY SHEAR :

The critical section for one way shear is at distance equal to effective depth distance from face
of column.

Across the axis X Across the axis Y

Distance of section from face of column = 0.332 m = 0.344 m

Length of projection = 0.493 m = 0.481 m
Max. pressure intensity = 181.1 kN/m2 = 181.1 kN/m
2
2 2
Pressure intensity at the section = 180.6 kN/m = 153.0 kN/m
Bending moment = 22.0 kN.m = 19.9 kN.m
Shear force = 89 kN = 80 kN
Effective depth of section = 0.332 m = 0.344 m
Shear stress = 269 kN/m2 = 234 kN/m2
= 0.269 N/mm2 = 0.234 N/mm
2

Percentage of reinforcement provided = 0.195 % 0.188 %

Permissible shear stress, τc = 0.327 N/mm2 OK 0.322 N/mm
2
OK
(From Table - 19 of IS 456 : 2000 )

CHECK FOR ONE-WAY SHEAR ON SLOPE FOOTING

One-way shear force = 154.0 kN = 154.0 kN

Area of truncate rectangle = 0.9 m2 = 0.9 m2
The shear stress = 179.0 kN/m2 = 179.0 kN/m2
= 0.179 N/mm2 OK = 0.179 OK

Summary :

Column Size : Bx x By = 350 x 350 mm

Footing Size : Lx x Ly = 2000 x 2000 mm
Depth of footing :Df = 0.400 m

Footing Reinforcement :
Reinforcement Along Lx = 12 dia bar @ 175 mm c/c
Reinforcement Along Ly = 12 dia bar @ 175 mm c/c

Y
350

X
2000

350

100 mm P.C.C.
100 mm P.C.C. 2000

12 dia bar @
175 mm c/c

0.400
100 mm P.C.C.

12 dia bar @ 175 mm c/c

 Support Reaction For F3 Grouping
Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m My kN-m Mz kN-m
160 101 1DL+1LL 1.421 285.237 1.808 1.64 0.016 -1.352
160 102 1DL+1WL +X -4 248.29 1.332 0.964 -0.005 8.227
160 103 1DL+1WL -X8.026 271.151 1.935 1.837 -0.006 -11.98
160 104 1DL+1WL +Z1.545 266.551 -9.803 -15.102 0.118 -1.434
160 105 1DL+1WL -Z1.507 251.331 13.676 18.717 -0.094 -1.377
160 106 1DL+1EQL-26.393
+X 191.894 0.309 -0.515 -0.15 45.03
160 107 1DL+1EQL 29.448
-X 326.169 3.263 3.755 0.175 -47.846
160 108 1DL+1EQL +Z1.575 286.638 -31.168 -46.255 0.194 -1.476
160 109 1DL+1EQL -Z1.48 231.424 34.74 49.495 -0.168 -1.34
160 110 1DL+.8LL+.8WL+X
-2.98 271.403 1.441 1.112 0.001 6.345
160 111 1DL+.8LL+.8WL
6.641-X 289.691 1.923 1.809 0 -9.821
160 112 1DL+.8LL+.8WL+Z
1.456 286.012 -7.467 -11.741 0.099 -1.384
160 113 1DL+.8LL+.8WL
1.426-Z 273.836 11.316 15.314 -0.071 -1.339
160 114 1DL+.8LL+.8EQL
-20.894+X 226.286 0.622 -0.072 -0.115 35.787
160 115 1DL+.8LL+.8EQL
23.779-X 333.706 2.985 3.344 0.145 -38.514
160 116 1DL+.8LL+.8EQL+Z
1.48 302.082 -24.559 -36.664 0.16 -1.418
160 117 1DL+.8LL+.8EQL
1.404-Z 257.91 28.167 39.936 -0.13 -1.309
162 101 1DL+1LL 2.212 323.945 -2.634 -2.27 0.019 -1.995
162 102 1DL+1WL +X-3.122 285.323 -3.183 -3.01 -0.113 7.327
162 103 1DL+1WL -X8.639 308.155 -2.562 -2.119 0.071 -12.424
162 104 1DL+1WL +Z2.205 289.005 -14.473 -19.229 0.114 -1.966
162 105 1DL+1WL -Z2.227 303.145 9.05 14.627 -0.104 -1.995
162 106 1DL+1EQL-25.316
+X 228.909 -4.216 -4.496 -0.159 43.777
162 107 1DL+1EQL 29.729
-X 363.112 -1.224 -0.192 0.189 -47.704
162 108 1DL+1EQL +Z2.162 270.297 -35.739 -50.278 0.198 -1.896
162 109 1DL+1EQL -Z2.252 321.723 30.3 45.59 -0.169 -2.031
162 110 1DL+.8LL+.8WL+X
-2.052 309.808 -3.022 -2.818 -0.084 5.444
162 111 1DL+.8LL+.8WL
7.357-X 328.073 -2.526 -2.105 0.063 -10.357
162 112 1DL+.8LL+.8WL+Z
2.21 312.754 -12.054 -15.793 0.097 -1.99
162 113 1DL+.8LL+.8WL
2.228-Z 324.066 6.764 11.292 -0.077 -2.013
162 114 1DL+.8LL+.8EQL
-19.807+X 264.677 -3.848 -4.007 -0.121 34.604
162 115 1DL+.8LL+.8EQL
24.229-X 372.039 -1.455 -0.563 0.157 -38.581
162 116 1DL+.8LL+.8EQL+Z
2.175 297.788 -29.067 -40.632 0.165 -1.934
162 117 1DL+.8LL+.8EQL
2.247-Z 338.928 23.764 36.062 -0.129 -2.043
168 101 1DL+1LL -0.016 359.793 1.879 1.66 0.006 -0.028
168 102 1DL+1WL +X-8.27 302.73 1.678 1.383 -0.007 11.943
168 103 1DL+1WL -X8.081 298.099 1.926 1.741 -0.014 -12.002
168 104 1DL+1WL +Z-0.15 309.796 -12.857 -19.571 0.127 0.104
168 105 1DL+1WL -Z-0.188 291.292 17.257 23.734 -0.148 0.155
168 106 1DL+1EQL-36.395
+X 314.427 1.258 0.779 -0.133 53.89
168 107 1DL+1EQL 36.059
-X 286.897 2.469 2.523 0.144 -53.635
168 108 1DL+1EQL +Z
-0.133 333.142 -36 -53.428 0.266 0.074
168 109 1DL+1EQL -Z
-0.204 268.182 39.728 56.73 -0.254 0.182
168 110 1DL+.8LL+.8WL+X
-6.528 349.621 1.727 1.444 -0.004 9.455
168 111 1DL+.8LL+.8WL
6.553
-X 345.916 1.926 1.73 -0.01 -9.701
168 112 1DL+.8LL+.8WL+Z
-0.032 355.274 -9.901 -15.319 0.103 -0.015
168 113 1DL+.8LL+.8WL
-0.063
-Z 340.471 14.19 19.324 -0.117 0.025
168 114 1DL+.8LL+.8EQL
-29.028+X 358.979 1.392 0.96 -0.105 43.013
168 115 1DL+.8LL+.8EQL
28.935-X 336.954 2.36 2.356 0.117 -43.007
168 116 1DL+.8LL+.8EQL+Z
-0.018 373.951 -28.415 -42.405 0.214 -0.04
168 117 1DL+.8LL+.8EQL
-0.075-Z 321.982 32.167 45.721 -0.202 0.047
170 101 1DL+1LL 0.354 418.7 -3.026 -2.671 0.003 -0.332
170 102 1DL+1WL +X-7.521 360.87 -3.275 -2.986 -0.076 11.137
170 103 1DL+1WL -X8.474 355.982 -3.033 -2.635 0.057 -12.277
170 104 1DL+1WL +Z0.312 350.17 -18.103 -24.236 0.126 -0.283
170 105 1DL+1WL -Z0.336 367.479 12.055 19.107 -0.141 -0.309
170 106 1DL+1EQL-35.355
+X 373.316 -3.686 -3.583 -0.154 52.645
170 107 1DL+1EQL 35.978
-X 344.107 -2.498 -1.859 0.158 -53.198
170 108 1DL+1EQL +Z0.244 327.788 -41.026 -57.863 0.253 -0.193
170 109 1DL+1EQL -Z0.379 389.635 34.841 52.421 -0.249 -0.36
170 110 1DL+.8LL+.8WL+X
-5.921 408.429 -3.185 -2.893 -0.06 8.81
170 111 1DL+.8LL+.8WL
6.875
-X 404.518 -2.992 -2.612 0.046 -9.921
170 112 1DL+.8LL+.8WL+Z
0.346 399.868 -15.047 -19.893 0.101 -0.326
170 113 1DL+.8LL+.8WL
0.365
-Z 413.716 9.079 14.781 -0.112 -0.347
170 114 1DL+.8LL+.8EQL
-28.188+X 418.385 -3.514 -3.371 -0.122 42.017
170 115 1DL+.8LL+.8EQL
28.878-X 395.019 -2.564 -1.991 0.127 -42.658
170 116 1DL+.8LL+.8EQL+Z
0.291 381.963 -33.386 -46.795 0.203 -0.254
170 117 1DL+.8LL+.8EQL
0.399-Z 431.441 27.308 41.432 -0.198 -0.387
176 101 1DL+1LL -0.082 408.369 1.417 1.229 0.002 0.072
176 102 1DL+1WL +X-7.762 341.845 1.351 1.155 -0.011 11.455
176 103 1DL+1WL -X8.008 348.31 1.447 1.287 -0.016 -11.947
176 104 1DL+1WL +Z-0.121 354.906 -14.707 -22.02 0.024 0.111
176 105 1DL+1WL -Z-0.129 335.695 18.638 25.992 -0.049 0.125
176 106 1DL+1EQL-35.478
+X 323.002 1.166 0.911 -0.124 53.122
176 107 1DL+1EQL 35.231
-X 366.81 1.654 1.563 0.128 -52.891
176 108 1DL+1EQL +Z
-0.116 370.986 -39.963 -59.008 0.106 0.096
176 109 1DL+1EQL -Z
-0.131 318.826 42.783 61.483 -0.103 0.135
176 110 1DL+.8LL+.8WL+X
-6.201 393.227 1.368 1.165 -0.008 9.153
176 111 1DL+.8LL+.8WL
6.415
-X 398.399 1.445 1.271 -0.012 -9.569
176 112 1DL+.8LL+.8WL+Z
-0.088 403.676 -11.478 -17.375 0.02 0.077
176 113 1DL+.8LL+.8WL
-0.095
-Z 388.308 15.198 21.034 -0.038 0.088
176 114 1DL+.8LL+.8EQL
-28.374+X 378.153 1.22 0.97 -0.098 42.486
176 115 1DL+.8LL+.8EQL
28.194-X 413.199 1.611 1.492 0.103 -42.325
176 116 1DL+.8LL+.8EQL+Z
-0.084 416.54 -31.683 -46.965 0.086 0.065
176 117 1DL+.8LL+.8EQL
-0.096-Z 374.813 34.514 49.427 -0.081 0.096
178 101 1DL+1LL -0.122 416.392 -1.73 -1.549 0.005 0.129
178 102 1DL+1WL +X-7.584 357.629 -1.849 -1.667 -0.085 11.155
178 103 1DL+1WL -X7.854 361.136 -1.751 -1.532 0.053 -11.738
178 104 1DL+1WL +Z-0.186 348.141 -18.211 -25.148 0.047 0.179
178 105 1DL+1WL -Z-0.176 370.769 15.205 22.926 -0.05 0.176
178 106 1DL+1EQL-35.054
+X 348.682 -2.036 -1.912 -0.137 52.419
178 107 1DL+1EQL 34.666
-X 369.819 -1.541 -1.254 0.145 -52.025
178 108 1DL+1EQL +Z
-0.253 317.16 -43.327 -61.976 0.123 0.264
178 109 1DL+1EQL -Z
-0.135 401.341 39.751 58.81 -0.115 0.13
178 110 1DL+.8LL+.8WL+X
-6.048 403.666 -1.79 -1.623 -0.066 8.909
178 111 1DL+.8LL+.8WL
6.302-X 406.472 -1.712 -1.515 0.044 -9.406
178 112 1DL+.8LL+.8WL+Z
-0.13 396.075 -14.88 -20.407 0.04 0.128
178 113 1DL+.8LL+.8WL
-0.122-Z 414.178 11.853 18.052 -0.038 0.126
178 114 1DL+.8LL+.8EQL
-28.024+X 396.508 -1.94 -1.819 -0.108 41.92
178 115 1DL+.8LL+.8EQL
27.752-X 413.418 -1.544 -1.293 0.118 -41.635
178 116 1DL+.8LL+.8EQL+Z
-0.183 371.291 -34.973 -49.87 0.1 0.196
178 117 1DL+.8LL+.8EQL
-0.089-Z 438.636 31.489 46.758 -0.09 0.089
184 101 1DL+1LL 0.087 415.448 1.257 1.128 0 -0.028
184 102 1DL+1WL +X-7.436 354.693 1.322 1.237 -0.014 11.158
184 103 1DL+1WL -X8.287 347.436 1.227 1.107 -0.018 -12.203
184 104 1DL+1WL +Z0.123 360.168 -14.74 -21.918 -0.046 -0.061
184 105 1DL+1WL -Z0.135 341.682 18.568 26.02 0.042 -0.078
184 106 1DL+1EQL-35.108
+X 375.115 1.517 1.495 -0.125 52.834
184 107 1DL+1EQL -X35.37 326.789 0.983 0.778 0.126 -52.977
184 108 1DL+1EQL +Z0.147 377.293 -40.284 -59.347 -0.078 -0.088
184 109 1DL+1EQL -Z0.115 324.612 42.784 61.62 0.079 -0.056
184 110 1DL+.8LL+.8WL+X
-5.958 405.542 1.313 1.211 -0.011 8.947
184 111 1DL+.8LL+.8WL6.62
-X 399.736 1.237 1.106 -0.015 -9.742
184 112 1DL+.8LL+.8WL+Z
0.089 409.921 -11.536 -17.314 -0.037 -0.028
184 113 1DL+.8LL+.8WL
0.099-Z 395.133 15.11 21.037 0.034 -0.041
184 114 1DL+.8LL+.8EQL
-28.095+X 421.879 1.469 1.417 -0.1 42.288
184 115 1DL+.8LL+.8EQL
28.287-X 383.219 1.042 0.843 0.1 -42.361
184 116 1DL+.8LL+.8EQL+Z
0.109 423.621 -31.972 -47.257 -0.063 -0.049
184 117 1DL+.8LL+.8EQL
0.083-Z 381.477 34.483 49.517 0.063 -0.024
186 101 1DL+1LL 0.797 407.266 -0.003 0.01 -0.002 -0.641
186 102 1DL+1WL +X-6.443 351.199 0.014 0.079 -0.083 10.135
186 103 1DL+1WL -X8.951 347.015 -0.083 -0.053 0.05 -12.72
186 104 1DL+1WL +Z 0.91 339.274 -16.355 -23.385 -0.05 -0.76
186 105 1DL+1WL -Z 0.86 360.778 17.023 24.614 0.044 -0.698
186 106 1DL+1EQL-33.873
+X 361.811 0.211 0.339 -0.139 51.41
186 107 1DL+1EQL -X35.62 336.473 -0.331 -0.386 0.137 -52.833
186 108 1DL+1EQL +Z0.904 306.678 -41.765 -60.658 -0.09 -0.735
186 109 1DL+1EQL -Z0.843 391.605 41.645 60.611 0.088 -0.689
186 110 1DL+.8LL+.8WL+X
-5.041 397.287 0.045 0.085 -0.067 8.022
186 111 1DL+.8LL+.8WL
7.275-X 393.94 -0.033 -0.021 0.039 -10.262
186 112 1DL+.8LL+.8WL+Z
0.842 387.748 -13.05 -18.686 -0.041 -0.694
186 113 1DL+.8LL+.8WL
0.802-Z 404.95 13.653 19.713 0.034 -0.645
186 114 1DL+.8LL+.8EQL
-26.984+X 405.777 0.203 0.293 -0.112 41.042
186 115 1DL+.8LL+.8EQL
28.61-X 385.506 -0.231 -0.287 0.109 -42.353
186 116 1DL+.8LL+.8EQL+Z
0.837 361.671 -33.378 -48.505 -0.073 -0.674
186 117 1DL+.8LL+.8EQL
0.788-Z 429.612 33.35 48.511 0.069 -0.637
192 101 1DL+1LL -0.081 368.944 1.503 1.385 0.003 0.165
192 102 1DL+1WL +X-7.615 306.193 1.661 1.627 -0.014 11.308
192 103 1DL+1WL -X8.696 311.656 1.414 1.271 -0.021 -12.604
192 104 1DL+1WL +Z0.041 317.61 -12.982 -19.475 -0.124 0.045
192 105 1DL+1WL -Z 0.08 299.544 16.955 23.564 0.151 -0.007
192 106 1DL+1EQL-36.064
+X 292.799 2.077 2.226 -0.135 53.692
192 107 1DL+1EQL 36.187
-X 325.074 0.897 0.523 0.142 -53.656
192 108 1DL+1EQL +Z0.046 341.605 -36.656 -54.105 -0.236 0.041
192 109 1DL+1EQL -Z0.076 276.267 39.629 56.854 0.242 -0.004
192 110 1DL+.8LL+.8WL+X
-6.194 354.748 1.639 1.585 -0.011 9.167
192 111 1DL+.8LL+.8WL
6.855
-X 359.118 1.442 1.3 -0.017 -9.962
192 112 1DL+.8LL+.8WL+Z
-0.069 363.882 -10.075 -15.296 -0.099 0.157
192 113 1DL+.8LL+.8WL
-0.038
-Z 349.429 13.874 19.135 0.121 0.115
192 114 1DL+.8LL+.8EQL
-28.953+X 344.032 1.972 2.065 -0.108 43.075
192 115 1DL+.8LL+.8EQL
28.847-X 369.853 1.028 0.702 0.113 -42.803
192 116 1DL+.8LL+.8EQL+Z
-0.065 383.078 -29.014 -43 -0.188 0.154
192 117 1DL+.8LL+.8EQL
-0.041-Z 330.807 32.014 45.767 0.194 0.118
194 101 1DL+1LL -0.232 429.265 -0.435 -0.338 -0.004 0.308
194 102 1DL+1WL +X-7.613 365.818 -0.329 -0.138 -0.088 11.157
194 103 1DL+1WL -X8.339 371.458 -0.576 -0.494 0.054 -12.22
194 104 1DL+1WL +Z-0.164 360.133 -15.267 -21.538 -0.127 0.209
194 105 1DL+1WL -Z-0.215 377.304 14.717 21.542 0.166 0.283
194 106 1DL+1EQL-35.751
+X 351.564 0.091 0.465 -0.153 53.082
194 107 1DL+1EQL 35.356
-X 385.234 -1.099 -1.246 0.147 -52.563
194 108 1DL+1EQL +Z
-0.171 336.997 -38.722 -55.939 -0.275 0.229
194 109 1DL+1EQL -Z
-0.224 399.801 37.714 55.158 0.27 0.29
194 110 1DL+.8LL+.8WL+X
-6.157 415.028 -0.309 -0.146 -0.072 9.017
194 111 1DL+.8LL+.8WL
6.604
-X 419.539 -0.507 -0.431 0.042 -9.685
194 112 1DL+.8LL+.8WL+Z
-0.199 410.48 -12.259 -17.267 -0.103 0.258
194 113 1DL+.8LL+.8WL
-0.239
-Z 424.216 11.728 17.197 0.131 0.317
194 114 1DL+.8LL+.8EQL
-28.668+X 403.624 0.027 0.336 -0.124 42.556
194 115 1DL+.8LL+.8EQL
28.218-X 430.56 -0.925 -1.033 0.116 -41.959
194 116 1DL+.8LL+.8EQL+Z
-0.204 391.97 -31.023 -44.787 -0.222 0.274
194 117 1DL+.8LL+.8EQL
-0.246-Z 442.214 30.125 44.09 0.214 0.323
200 101 1DL+1LL -1.551 285.285 1.928 1.79 -0.005 1.518
200 102 1DL+1WL +X-7.727 269.911 2.356 2.421 -0.026 11.431
200 103 1DL+1WL -X4.307 247 1.752 1.547 -0.029 -8.782
200 104 1DL+1WL +Z-1.671 266.459 -9.432 -14.587 -0.124 1.597
200 105 1DL+1WL -Z-1.631 251.426 13.853 18.948 0.102 1.539
200 106 1DL+1EQL-29.587
+X 326.446 3.371 3.888 -0.165 48.021
200 107 1DL+1EQL 26.285
-X 191.893 0.439 -0.351 0.161 -44.884
200 108 1DL+1EQL +Z
-1.682 286.989 -31.371 -46.57 -0.17 1.608
200 109 1DL+1EQL -Z
-1.621 231.35 35.182 50.107 0.166 1.529
200 110 1DL+.8LL+.8WL+X
-6.431 288.655 2.284 2.307 -0.024 9.418
200 111 1DL+.8LL+.8WL
3.195
-X 270.327 1.801 1.608 -0.026 -6.753
200 112 1DL+.8LL+.8WL+Z
-1.587 285.894 -7.146 -11.299 -0.102 1.551
200 113 1DL+.8LL+.8WL
-1.555
-Z 273.867 11.482 15.529 0.079 1.505
200 114 1DL+.8LL+.8EQL
-23.92+X 333.884 3.097 3.481 -0.135 38.69
200 115 1DL+.8LL+.8EQL
20.778-X 226.241 0.751 0.09 0.126 -35.634
200 116 1DL+.8LL+.8EQL+Z
-1.595 302.318 -24.697 -36.885 -0.139 1.559
200 117 1DL+.8LL+.8EQL
-1.546-Z 257.807 28.545 40.456 0.13 1.496
202 101 1DL+1LL -2.788 321.833 -2.301 -1.935 -0.007 2.583
202 102 1DL+1WL +X-8.651 304.674 -1.929 -1.351 -0.105 12.071
202 103 1DL+1WL -X3.118 281.785 -2.55 -2.243 0.077 -7.689
202 104 1DL+1WL +Z-2.741 287.194 -13.88 -18.522 -0.112 2.492
202 105 1DL+1WL -Z-2.795 301.038 9.432 15.036 0.112 2.573
202 106 1DL+1EQL-30.307
+X 361.199 -0.903 0.125 -0.182 48.293
202 107 1DL+1EQL 24.757
-X 226.816 -3.872 -4.147 0.175 -43.202
202 108 1DL+1EQL +Z
-2.746 268.507 -35.71 -50.391 -0.173 2.51
202 109 1DL+1EQL -Z
-2.804 319.508 30.934 46.369 0.167 2.581
202 110 1DL+.8LL+.8WL+X
-7.486 324.802 -1.951 -1.422 -0.087 10.196
202 111 1DL+.8LL+.8WL
1.929
-X 306.49 -2.448 -2.136 0.058 -5.612
202 112 1DL+.8LL+.8WL+Z
-2.757 310.818 -11.512 -15.158 -0.093 2.532
202 113 1DL+.8LL+.8WL
-2.801
-Z 321.893 7.138 11.688 0.087 2.597
202 114 1DL+.8LL+.8EQL
-24.811+X 370.021 -1.13 -0.241 -0.149 39.174
202 115 1DL+.8LL+.8EQL
19.241-X 262.515 -3.506 -3.659 0.137 -34.023
202 116 1DL+.8LL+.8EQL+Z
-2.762 295.868 -28.976 -40.654 -0.142 2.547
202 117 1DL+.8LL+.8EQL
-2.809-Z 336.668 24.34 36.754 0.13 2.604
10.00 DESIGN OF FOUNDATION
10.10 DESIGN OF ISOLATED FOUNDATION :F3

DATA :
Footing Designation = F3
Column Size : Bx = 0.35 m
By = 0.35 m Material Properties :
2
Loads : Axial Load, P = 442 kN fck = 25 N/mm
2
Moment, Mx = 45 kN.m fy = 500 N/mm
Moment, My = 1 kN.m
Lateral Load, Sx = 1 kN.m
Lateral Load, Sy = 30 kN.m
Net Safe Bearing Capacity of Soil = 120 kN/m2 at 3.0 m depth
Safe Bearing Capacity of Soil = = 180 kN/m2
Safe Bearing Capacity of Soil in EQ Case = 225 kN/m2
Depth of Foundation = 3 m
Unit Weight of Soil = 20 kN/m3
Unit Weight of Concrete = 25 kN/m3
Clear Cover to concrete = 50 mm
PCC Thickness = 100 mm Thk.

PROPORTIONING OF BASE SIZE :

Provide the dimensions of footing as follow :
Lx = 2.2 m
Ly = 2.2 m OK
Thickness of footing D = 0.40 m d1 = 0.40 m
d = 0.40 m check for taperd footing
Total axial load including self-weight of footing & soil weight above top of footing .

Axial Load, P = 735.71 kN

Moment, Mx = 45 kN.m My
Moment, My = 1 kN.m Y

By
X
Ly
P Mx

Bx

LX

d d

d
d1
Factored values of loads :
Load Factor = 1.5
Axial Load, P = 663 kN
Moment, Mx = 67.5 kN.m
Moment, My = 1.5 kN.m

PRESSURE DISTRIBUTION AT BASE :

126 ** Y 127 ** 99.79 kN/m2

98 100
2 178 kN/m2
X 143.9 kN/m

174.2 176 0.93 m 176 kN/m2

177 ** 178 **
2
175 kN/m
174.2
kN/m2 176 kN/m
2

0.93 m

**Values of Base Pressure due to load intensity including self weight for SBC check

Total downward load

Weight of soil = 245.3 kN

Weight of Column = 0 kN (Already Considered in STAAD)
Weight of Footing = 48.4 kN

Total downward load= 293.7 kN

Check for overturning

Overturning check about x axis
Mo = 45 + 30 x 3 = 135 kN-m
MR = 293.7 x 1.10 + 442 x 1.1
= 809.281 kN-m
FOS = 5.9947 > 1.5 Safe
Overturning check about y axis
Mo = 1 + 1 x 3 = 4 kN-m
MR = 293.7 x 1.1 + 442 x 1.1
= 809.281 kN-m
FOS = 202.32025 > 1.5 Safe

Check for sliding

Total resulatant horizontal force= SQRT(Sx^2+Sz^2) = 30.02 kN µ= 0.45

11.03 > 1.5 OK

Design Coefficients:-

xumax/d = 0.46
j = 0.807
R = 3.325
Design of section :

Across the axis X : Distribution Reinforcement Across the axis Y : Main Reinforcement

B.M. at face of column = 75 kN.m B.M. at face of column = 71 kN.m

Effective depth required = 0.150 m Effective depth required = 0.146 m

Provided total depth = 0.4 m Provided total depth = 0.40 m

Effective depth, dx = 0.332 m OK Effective depth, dy = 0.34 m OK

REINFORCEMENT AT BOTTOM :

Reinforcement Along the Axis X : Reinforcement Along the Axis Y :

Section at face of column : Section at face of column :

Bending moment = 75 kN.m Bending moment = 71 kN.m
2 2
Area of steel required = 644.84 mm Area of steel required = 585 mm
2 2
Min steel requried (0.12%) = 480 mm Min steel requried (0.12%) = 480 mm

Required reinforcement along x direction = 644.84 mm2

Required 12 mm dia @ 175 mm c/c
Provided 12 mm dia @ 150 mm c/c = 753.6 mm2 OK

Required reinforcement along y direction = 585.405 mm2

Required 12 mm dia @ 193 mm c/c
Provided 12 mm dia @ 150 mm c/c = 753.6 mm2 OK

CHECK FOR PUNCHING SHEAR :

2
Average presure intensity = 137 kN/m

The critical section for punching shear is at distance equal to half effective depth distance from
face of column.

Punching shear force = 599 kN

Depth of section = 0.40 m
Efffective depth of section = 0.34 m
Shear stress = 0.64 N/mm2
0.17

0.682 m

2.20 m

0.17

0.682 m

2.20 m

Permissible punching shear stress

= k s x tc
where, ks = 1.00
tc = 1.25 N/mm2
> 0.64. Hence, Safe against punching shear
CHECK FOR ONE-WAY SHEAR :

The critical section for one way shear is at distance equal to effective depth distance from face
of column.

Across the axis X Across the axis Y

Distance of section from face of column = 0.332 m = 0.344 m

Length of projection = 0.593 m = 0.581 m
Max. pressure intensity = 175.9 kN/m2 = 175.9 kN/m
2
2 2
Pressure intensity at the section = 175.4 kN/m = 155.8 kN/m
Bending moment = 30.9 kN.m = 28.6 kN.m
Shear force = 104 kN = 96 kN
Effective depth of section = 0.332 m = 0.344 m
Shear stress = 314 kN/m2 = 280 kN/m2
= 0.314 N/mm2 = 0.280 N/mm
2

Percentage of reinforcement provided = 0.227 % 0.219 %

Permissible shear stress, τc = 0.35 N/mm2 OK 0.344 N/mm
2
OK
(From Table - 19 of IS 456 : 2000 )

CHECK FOR ONE-WAY SHEAR ON SLOPE FOOTING

One-way shear force = 203.1 kN = 203.1 kN

Area of truncate rectangle = 0.9 m2 = 0.9 m2
The shear stress = 225.7 kN/m2 = 225.7 kN/m2
= 0.226 N/mm2 OK = 0.226 OK

Summary :

Column Size : Bx x By = 350 x 350 mm

Footing Size : Lx x Ly = 2200 x 2200 mm
Depth of footing :Df = 0.400 m

Footing Reinforcement :
Reinforcement Along Lx = 12 dia bar @ 150 mm c/c
Reinforcement Along Ly = 12 dia bar @ 150 mm c/c

Y
350

X
2200

350

100 mm P.C.C.
100 mm P.C.C. 2200

12 dia bar @
150 mm c/c

0.400
100 mm P.C.C.

12 dia bar @ 150 mm c/c

 01 January 2025 16:56

PAGE NO. 1

****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.00.00.15 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JAN 1, 2025 *
* Time= 16:56:33 *
* *
* Licensed to: only @ ::LAVTeam:: (R) *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.STD
2. START JOB INFORMATION
3. ENGINEER DATE 05-JUN-18
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 158 75.5002 -3.00001 19.5; 159 75.5002 -0.300001 19.5
9. 160 75.5002 -3.00001 15.685; 161 75.5002 -0.300001 15.685
10. 162 75.5002 -3.00001 13.28; 163 75.5002 -0.300001 13.28
11. 164 75.5002 -3.00001 9.54998; 165 75.5002 -0.300001 9.54998
12. 166 79.6502 -3.00001 19.5; 167 79.6502 -0.300001 19.5
13. 168 79.6502 -3.00001 15.685; 169 79.6502 -0.300001 15.685
14. 170 79.6502 -3.00001 13.28; 171 79.6502 -0.300001 13.28
15. 172 79.6502 -3.00001 9.54998; 173 79.6502 -0.300001 9.54998
16. 174 83.9002 -3.00001 19.5; 175 83.9002 -0.300001 19.5
17. 176 83.9002 -3.00001 15.685; 177 83.9002 -0.300001 15.685
18. 178 83.9002 -3.00001 13.28; 179 83.9002 -0.300001 13.28
19. 180 83.9002 -3.00001 9.54998; 181 83.9002 -0.300001 9.54998
20. 182 87.8302 -3.00001 19.5; 183 87.8302 -0.300001 19.5
21. 184 87.8302 -3.00001 15.685; 185 87.8302 -0.300001 15.685
22. 186 87.8302 -3.00001 13.28; 187 87.8302 -0.300001 13.28
23. 188 87.8302 -3.00001 9.54998; 189 87.8302 -0.300001 9.54998
24. 190 92.2002 -3.00001 19.5; 191 92.2002 -0.300001 19.5
25. 192 92.2002 -3.00001 15.685; 193 92.2002 -0.300001 15.685
26. 194 92.2002 -3.00001 13.28; 195 92.2002 -0.300001 13.28
27. 196 92.2002 -3.00001 9.54998; 197 92.2002 -0.300001 9.54998
28. 198 96.3502 -3.00001 19.5; 199 96.3502 -0.300001 19.5
29. 200 96.3502 -3.00001 15.685; 201 96.3502 -0.300001 15.685
30. 202 96.3502 -3.00001 13.28; 203 96.3502 -0.300001 13.28
31. 204 96.3502 -3.00001 9.54998; 205 96.3502 -0.300001 9.54998
32. 206 75.5002 2.85001 19.5; 207 75.5002 2.85001 15.685
33. 208 75.5002 2.85001 13.28; 209 75.5002 2.85001 9.54998
34. 210 79.6502 2.85001 19.5; 211 79.6502 2.85001 15.685
35. 212 79.6502 2.85001 13.28; 213 79.6502 2.85001 9.54998
36. 214 83.9002 2.85001 19.5; 215 83.9002 2.85001 15.685
37. 216 83.9002 2.85001 13.28; 217 83.9002 2.85001 9.54998
38. 218 87.8302 2.85001 19.5; 219 87.8302 2.85001 15.685

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 1 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 2

39. 220 87.8302 2.85001 13.28; 221 87.8302 2.85001 9.54998

40. 222 92.2002 2.85001 19.5; 223 92.2002 2.85001 15.685
41. 224 92.2002 2.85001 13.28; 225 92.2002 2.85001 9.54998
42. 226 96.3502 2.85001 19.5; 227 96.3502 2.85001 15.685
43. 228 96.3502 2.85001 13.28; 229 96.3502 2.85001 9.54998
44. 230 75.5002 6.00001 19.5; 231 75.5002 6.00001 15.685
45. 232 75.5002 6.00001 13.28; 233 75.5002 6.00001 9.54998
46. 234 79.6502 6.00001 19.5; 235 79.6502 6.00001 15.685
47. 236 79.6502 6.00001 13.28; 237 79.6502 6.00001 9.54998
48. 238 83.9002 6.00001 19.5; 239 83.9002 6.00001 15.685
49. 240 83.9002 6.00001 13.28; 241 83.9002 6.00001 9.54998
50. 242 87.8302 6.00001 19.5; 243 87.8302 6.00001 15.685
51. 244 87.8302 6.00001 13.28; 245 87.8302 6.00001 9.54998
52. 246 92.2002 6.00001 19.5; 247 92.2002 6.00001 15.685
53. 248 92.2002 6.00001 13.28; 249 92.2002 6.00001 9.54998
54. 250 96.3502 6.00001 19.5; 251 96.3502 6.00001 15.685
55. 252 96.3502 6.00001 13.28; 253 96.3502 6.00001 9.54998
56. 254 83.9002 8.85002 19.5; 255 83.9002 8.85002 15.685; 256 87.8302 8.85002 19.5
57. 257 87.8302 8.85002 15.685; 258 75.5002 2.85001 20.7; 259 79.6502 2.85001 20.7
58. 260 83.9002 2.85001 20.7; 261 87.8302 2.85001 20.7; 262 92.2002 2.85001 20.7
59. 263 96.3502 2.85001 20.7; 264 79.6502 2.85001 8.34998
60. 265 83.9002 2.85001 8.34998; 266 87.8302 2.85001 8.34998
61. 267 92.2002 2.85001 8.34998; 268 75.5002 -0.300001 12.11
62. 269 79.6502 -0.300001 12.11; 270 77.1002 -0.300001 15.685
63. 271 77.1002 -0.300001 13.28; 272 77.1002 -0.300001 12.11
64. 273 85.9002 -0.300001 13.28; 274 85.9002 -0.300001 9.54998
65. 275 83.9002 -0.300001 11.98; 276 85.9002 -0.300001 11.98
66. 277 90.2002 -0.300001 13.28; 278 90.2002 -0.300001 9.54998
67. 279 92.7002 -0.300001 13.28; 280 92.7002 -0.300001 9.54998
68. 281 92.7002 -0.300001 12.05; 282 96.3502 -0.300001 12.05
69. 283 94.7502 -0.300001 15.685; 284 94.7502 -0.300001 13.28
70. 285 94.7502 -0.300001 12.05; 286 75.5002 2.85001 12.11
71. 287 77.1002 2.85001 12.11; 288 77.1002 2.85001 15.685
72. 289 77.1002 2.85001 13.28; 290 79.6502 2.85001 12.11
73. 292 94.7502 2.85001 12.05; 293 94.7502 2.85001 15.685
74. 294 94.7502 2.85001 13.28; 295 96.3502 2.85001 12.05
75. 296 92.2002 2.85001 12.05; 297 85.8652 2.85001 9.54998
76. 298 85.8652 2.85001 13.28
77. MEMBER INCIDENCES
78. 288 158 159; 289 160 161; 290 162 163; 291 164 165; 292 166 167; 293 168 169
79. 294 170 171; 295 172 173; 296 174 175; 297 176 177; 298 178 179; 299 180 181
80. 300 182 183; 301 184 185; 302 186 187; 303 188 189; 304 190 191; 305 192 193
81. 306 194 195; 307 196 197; 308 198 199; 309 200 201; 310 202 203; 311 204 205
82. 312 159 167; 313 167 175; 314 175 183; 315 183 191; 316 191 199; 317 161 270
83. 318 169 177; 319 177 185; 320 185 193; 321 193 283; 322 163 271; 323 171 179
84. 324 179 273; 325 187 277; 326 195 279; 327 165 173; 328 173 181; 329 181 274
85. 330 189 278; 331 197 280; 332 159 161; 333 161 163; 334 163 268; 335 167 169
86. 336 169 171; 337 171 269; 338 175 177; 339 177 179; 340 179 275; 341 183 185
87. 342 185 187; 343 187 189; 344 191 193; 345 193 195; 346 195 197; 347 199 201
88. 348 201 203; 349 203 282; 350 159 206; 351 161 207; 352 163 208; 353 165 209
89. 354 167 210; 355 169 211; 356 171 212; 357 173 213; 358 175 214; 359 177 215
90. 360 179 216; 361 181 217; 362 183 218; 363 185 219; 364 187 220; 365 189 221
91. 366 191 222; 367 193 223; 368 195 224; 369 197 225; 370 199 226; 371 201 227
92. 372 203 228; 373 205 229; 374 206 210; 375 210 214; 376 214 218; 377 218 222
93. 378 222 226; 379 207 288; 380 211 215; 381 215 219; 382 219 223; 383 223 293
94. 384 208 289; 385 212 216; 386 216 298; 387 220 224; 388 224 294; 389 209 213

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 2 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 3

95. 390 213 217; 391 217 297; 392 221 225; 393 225 229; 394 206 207; 395 207 208
96. 396 208 286; 397 210 211; 398 211 212; 399 212 290; 400 214 215; 401 215 216
97. 402 216 217; 403 218 219; 404 219 220; 405 220 221; 406 222 223; 407 223 224
98. 408 224 296; 409 226 227; 410 227 228; 411 228 295; 412 206 230; 413 207 231
99. 414 208 232; 415 209 233; 416 210 234; 417 211 235; 418 212 236; 419 213 237
100. 420 214 238; 421 215 239; 422 216 240; 423 217 241; 424 218 242; 425 219 243
101. 426 220 244; 427 221 245; 428 222 246; 429 223 247; 430 224 248; 431 225 249
102. 432 226 250; 433 227 251; 434 228 252; 435 229 253; 436 230 234; 437 234 238
103. 438 238 242; 439 242 246; 440 246 250; 441 231 235; 442 235 239; 443 239 243
104. 444 243 247; 445 247 251; 446 232 236; 447 236 240; 448 240 244; 449 244 248
105. 450 248 252; 451 233 237; 452 237 241; 453 241 245; 454 245 249; 455 249 253
106. 456 230 231; 457 231 232; 458 232 233; 459 234 235; 460 235 236; 461 236 237
107. 462 238 239; 463 239 240; 464 240 241; 465 242 243; 466 243 244; 467 244 245
108. 468 246 247; 469 247 248; 470 248 249; 471 250 251; 472 251 252; 473 252 253
109. 474 238 254; 475 239 255; 476 242 256; 477 243 257; 478 254 256; 479 255 257
110. 480 254 255; 481 256 257; 482 258 259; 483 259 260; 484 261 262; 485 262 263
111. 486 206 258; 487 210 259; 488 214 260; 489 218 261; 490 222 262; 491 226 263
112. 492 264 265; 493 266 267; 494 213 264; 495 217 265; 496 221 266; 497 225 267
113. 498 268 165; 499 269 173; 500 268 272; 501 270 169; 502 271 171; 503 270 271
114. 504 272 269; 505 271 272; 506 273 187; 507 274 189; 508 273 276; 509 275 181
115. 510 276 274; 511 275 276; 512 277 195; 513 278 197; 514 277 278; 515 279 284
116. 516 280 205; 517 279 281; 518 281 280; 519 282 205; 520 281 285; 521 283 201
117. 522 284 203; 523 283 284; 524 285 282; 525 284 285; 526 286 209; 527 286 287
118. 528 288 211; 529 289 212; 530 288 289; 531 290 213; 532 287 290; 533 289 287
119. 534 292 296; 535 293 227; 536 294 228; 537 293 294; 538 295 229; 539 292 295
120. 540 294 292; 541 296 225; 542 297 221; 543 298 220; 544 298 297
121. START GROUP DEFINITION
122. MEMBER
123. FLOOR
124. JOINT
125. END GROUP DEFINITION

** WARNING: NO VALID GROUPS IN GROUP DEFINITION DATA **

126. DEFINE MATERIAL START
127. ISOTROPIC CONCRETE
128. E 2.17184E+07
129. POISSON 0.17
130. DENSITY 23.5615
131. ALPHA 5.5E-06
132. DAMP 0.05
133. END DEFINE MATERIAL
134. MEMBER PROPERTY AMERICAN
135. 288 TO 311 350 TO 373 412 TO 435 474 TO 477 PRIS YD 0.35 ZD 0.35
136. 374 TO 411 436 TO 473 478 TO 497 526 TO 544 PRIS YD 0.45 ZD 0.3
137. MEMBER PROPERTY AMERICAN
138. 500 503 TO 505 508 510 511 514 517 518 520 523 TO 525 PRIS YD 0.3 ZD 0.3
139. 312 TO 349 498 499 501 502 506 507 509 512 513 515 516 519 521 -
140. 522 PRIS YD 0.5 ZD 0.3
141. CONSTANTS
142. BETA 90 MEMB 288 TO 311 350 TO 373 412 TO 435 474 TO 477
143. MATERIAL CONCRETE ALL
144. SUPPORTS
145. 158 160 162 164 166 168 170 172 174 176 178 180 182 184 186 188 190 192 194 -
146. 196 198 200 202 204 FIXED
147. MEMBER RELEASE
148. 482 TO 485 492 493 500 503 505 508 511 514 517 520 523 525 527 530 533 537 -

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 3 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 4

149. 540 544 START MY MZ

150. 482 TO 485 492 493 503 TO 505 510 511 514 518 523 TO 525 530 532 TO 534 537 -
151. 539 540 544 END MY MZ
152. DEFINE 1893 LOAD
153. ZONE 0.3 RF 5 I 1.5 SS 1 ST 1 DM 0.05 DT 3
154. JOINT WEIGHT
155. 159 WEIGHT 67.455
156. 161 WEIGHT 76.891
157. 163 WEIGHT 109.731
158. 165 WEIGHT 74.388
159. 167 WEIGHT 106.745
160. 169 WEIGHT 66.463
161. 171 WEIGHT 116.065
162. 173 WEIGHT 111.438
163. 175 WEIGHT 96.779
164. 177 WEIGHT 67.696
165. 179 WEIGHT 111.158
166. 181 WEIGHT 113.168
167. 183 WEIGHT 97.816
168. 185 WEIGHT 73.992
169. 187 WEIGHT 94.289
170. 189 WEIGHT 110.273
171. 191 WEIGHT 107.03
172. 193 WEIGHT 75.467
173. 195 WEIGHT 124.431
174. 197 WEIGHT 137.061
175. 199 WEIGHT 67.025
176. 201 WEIGHT 77.827
177. 203 WEIGHT 106.998
178. 205 WEIGHT 74.788
179. 206 WEIGHT 116.606
180. 207 WEIGHT 110.033
181. 208 WEIGHT 143.13
182. 209 WEIGHT 89.568
183. 210 WEIGHT 212.454
184. 211 WEIGHT 145.028
185. 212 WEIGHT 186.246
186. 213 WEIGHT 186.137
187. 214 WEIGHT 169.089
188. 215 WEIGHT 143.024
189. 216 WEIGHT 178.389
190. 217 WEIGHT 180.897
191. 218 WEIGHT 172.48
192. 219 WEIGHT 144.515
193. 220 WEIGHT 181.361
194. 221 WEIGHT 183.77
195. 222 WEIGHT 215.126
196. 223 WEIGHT 145.345
197. 224 WEIGHT 188.915
198. 225 WEIGHT 188.763
199. 226 WEIGHT 131.928
200. 227 WEIGHT 107.542
201. 228 WEIGHT 143.487
202. 229 WEIGHT 89.847
203. 230 WEIGHT 64.188
204. 231 WEIGHT 86.219

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 4 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 5

205. 232 WEIGHT 82.121

206. 233 WEIGHT 64.117
207. 234 WEIGHT 122.724
208. 235 WEIGHT 139.609
209. 236 WEIGHT 135.653
210. 237 WEIGHT 121.581
211. 238 WEIGHT 110.95
212. 239 WEIGHT 123.698
213. 240 WEIGHT 120.087
214. 241 WEIGHT 105.586
215. 242 WEIGHT 113.282
216. 243 WEIGHT 126.273
217. 244 WEIGHT 122.526
218. 245 WEIGHT 107.949
219. 246 WEIGHT 124.155
220. 247 WEIGHT 141.321
221. 248 WEIGHT 137.104
222. 249 WEIGHT 123.157
223. 250 WEIGHT 63.749
224. 251 WEIGHT 86.264
225. 252 WEIGHT 81.683
226. 253 WEIGHT 63.911
227. 254 WEIGHT 62.615
228. 255 WEIGHT 62.469
229. 256 WEIGHT 62.569
230. 257 WEIGHT 62.417
231. LOAD 1 LOADTYPE SEISMIC TITLE EQ X
232. 1893 LOAD X 1
233. LOAD 2 LOADTYPE SEISMIC TITLE EQ IN Z
234. 1893 LOAD Z 1
235. LOAD 3 LOADTYPE DEAD TITLE DL
236. SELFWEIGHT Y -1
237. ONEWAY LOAD
238. YRANGE 2.85 2.85 ONE -4 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

239. YRANGE 6 6 ONE -6.15 GY

240. YRANGE 8.85 8.85 ONE -6.15 GY
241. MEMBER LOAD
242. 312 TO 316 327 TO 334 347 TO 349 374 TO 378 389 TO 396 409 TO 411 491 498 -
243. 507 513 516 519 526 538 542 UNI GY -11.7
244. 323 325 335 337 TO 342 344 379 381 383 385 TO 387 397 399 TO 406 408 499 500 -
245. 503 TO 505 508 TO 512 514 517 518 520 523 TO 525 527 528 530 TO 535 537 539 -

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 5 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 6

246. 540 TO 541 543 544 UNI GY -8.2

247. 478 TO 481 UNI GY -3.7
248. 436 TO 440 451 TO 458 471 TO 473 UNI GY -6.6
249. LOAD 4 LOADTYPE LIVE TITLE LL
250. ONEWAY LOAD
251. YRANGE 2.85 2.85 ONE -3 GY
252. YRANGE 6 6 ONE -1.5 GY
253. YRANGE 8.85 8.85 ONE -2.5 GY
254. LOAD 5 LOADTYPE WIND TITLE WIND LOAD +X
255. MEMBER LOAD
256. 353 415 UNI GX 4.01
257. 352 414 UNI GX 6.65
258. 351 413 UNI GX 6.74
259. 350 412 474 475 UNI GX 4.1
260. LOAD 6 LOADTYPE WIND TITLE WIND LOAD IN -X
261. MEMBER LOAD
262. 370 373 432 435 467 476 477 UNI GX -4.01
263. 372 434 UNI GX -6.65
264. 371 433 UNI GX -6.74
265. LOAD 7 LOADTYPE WIND TITLE WIND LOAD IN +Z
266. MEMBER LOAD
267. 369 431 UNI GZ 9.16
268. 373 435 475 UNI GZ 4.46
269. 365 427 UNI GZ 8.92
270. 361 423 UNI GZ 8.8
271. 357 419 UNI GZ 9.03
272. 353 415 UNI GZ 4.46
273. LOAD 8 LOADTYPE WIND TITLE WIND LOAD IN -Z
274. MEMBER LOAD
275. 366 428 UNI GZ -9.16
276. 370 432 474 476 UNI GZ -4.46
277. 362 424 UNI GZ -8.92
278. 358 420 UNI GZ -8.8
279. 354 416 UNI GZ -9.03
280. 350 412 UNI GZ -4.46
281. *LOAD COMB FOR SERVICEBILITY
282. LOAD COMB 101 1DL+1LL
283. 3 1.0 4 1.0
284. LOAD COMB 102 1DL+1WL +X
285. 3 1.0 5 1.0
286. LOAD COMB 103 1DL+1WL -X
287. 3 1.0 6 1.0
288. LOAD COMB 104 1DL+1WL +Z
289. 3 1.0 7 1.0
290. LOAD COMB 105 1DL+1WL -Z
291. 3 1.0 8 1.0
292. LOAD COMB 106 1DL+1EQL +X
293. 3 1.0 1 1.0
294. LOAD COMB 107 1DL+1EQL -X
295. 3 1.0 1 -1.0
296. LOAD COMB 108 1DL+1EQL +Z
297. 3 1.0 2 1.0
298. LOAD COMB 109 1DL+1EQL -Z

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 6 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 7

299. 3 1.0 2 -1.0

300. LOAD COMB 110 1DL+.8LL+.8WL+X
301. 3 1.0 4 0.8 5 0.8
302. LOAD COMB 111 1DL+.8LL+.8WL -X
303. 3 1.0 4 0.8 6 0.8
304. LOAD COMB 112 1DL+.8LL+.8WL+Z
305. 3 1.0 4 0.8 7 0.8
306. LOAD COMB 113 1DL+.8LL+.8WL -Z
307. 3 1.0 4 0.8 8 0.8
308. LOAD COMB 114 1DL+.8LL+.8EQL +X
309. 3 1.0 4 0.8 1 0.8
310. LOAD COMB 115 1DL+.8LL+.8EQL -X
311. 3 1.0 4 0.8 1 -0.8
312. LOAD COMB 116 1DL+.8LL+.8EQL+Z
313. 3 1.0 4 0.8 2 0.8
314. LOAD COMB 117 1DL+.8LL+.8EQL -Z
315. 3 1.0 4 0.8 2 -0.8
316. *LOAD COMB FOR COLLASPE
317. LOAD COMB 201 1.5DL+1.5LL
318. 3 1.5 4 1.5
319. LOAD COMB 202 1.5DL+1.5WL +X
320. 3 1.5 5 1.5
321. LOAD COMB 203 1.5DL+1.5WL -X
322. 3 1.5 6 1.5
323. LOAD COMB 204 1.5DL+1.5WL +Z
324. 3 1.5 7 1.5
325. LOAD COMB 205 1.5DL+1.5WL -Z
326. 3 1.5 8 1.5
327. LOAD COMB 206 1.5DL+1.5EQL +X
328. 3 1.5 1 1.5
329. LOAD COMB 207 1.5DL+1.5EQL -X
330. 3 1.5 1 -1.5
331. LOAD COMB 208 1.5DL+1.5EQL +Z
332. 3 1.5 2 1.5
333. LOAD COMB 209 1.5DL+1.5EQL -Z
334. 3 1.5 2 -1.5
335. LOAD COMB 210 .9DL+1.5WL +X
336. 3 0.9 5 1.5
337. LOAD COMB 211 .9DL+1.5WL -X
338. 3 0.9 6 1.5
339. LOAD COMB 212 .9DL+1.5WL +Z
340. 3 0.9 7 1.5
341. LOAD COMB 213 .9DL+1.5WL -Z
342. 3 0.9 8 1.5
343. LOAD COMB 214 .9DL+1.5EQL +X
344. 3 0.9 1 1.5
345. LOAD COMB 215 .9DL+1.5EQL -X
346. 3 0.9 1 -1.5
347. LOAD COMB 216 .9DL+1.5EQL +Z
348. 3 0.9 2 1.5
349. LOAD COMB 217 .9DL+1.5EQL -Z
350. 3 0.9 2 -1.5
351. LOAD COMB 218 1.2DL+1.2LL+1.2WL+X
352. 3 1.2 4 1.2 5 1.2
353. LOAD COMB 219 1.2DL+1.2LL+1.2WL -X
354. 3 1.2 4 1.2 6 1.2

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 7 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 8

355. LOAD COMB 220 1.2DL+1.2LL+1.2WL+Z

356. 3 1.2 4 1.2 7 1.2
357. LOAD COMB 221 1.2DL+1.2LL+1.2WL -Z
358. 3 1.2 4 1.2 8 1.2
359. LOAD COMB 222 1.2DL+1.2LL+1.2EQL +X
360. 3 1.2 4 1.2 1 1.2
361. LOAD COMB 223 1.2DL+1.2LL+1.2EQL -X
362. 3 1.2 4 1.2 1 -1.2
363. LOAD COMB 224 1.2DL+1.2LL+1.2EQL+Z
364. 3 1.2 4 1.2 2 1.2
365. LOAD COMB 225 1.2DL+1.2LL+1.2EQL -Z
366. 3 1.2 4 1.2 2 -1.2
367. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 140 NUMBER OF MEMBERS 257

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 24

Using 64-bit analysis engine.

SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 8, TOTAL DEGREES OF FREEDOM = 696

TOTAL LOAD COMBINATION CASES = 42 SO FAR.

**WARNING: IF THIS UBC/IBC ANALYSIS HAS TENSION/COMPRESSION

OR REPEAT LOAD OR RE-ANALYSIS OR SELECT OPTIMIZE, THEN EACH
UBC/IBC CASE SHOULD BE FOLLOWED BY PERFORM ANALYSIS & CHANGE.

*********************************************************
* UNITS - KN METE *
* TIME PERIOD FOR X 1893 LOADING = 0.47902 SEC *
* SA/G PER 1893= 2.088, LOAD FACTOR= 1.000 *
* FACTOR V PER 1893 AT GL= 0.0939 X 8836.63 *
* FACTOR V PER 1893 AT 30 M= 0.0470 X 8836.63 *
* FACTOR V PER 1893= 0.0892 X 8836.63 *
* *
*********************************************************

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 8 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 9

*********************************************************
* UNITS - KN METE *
* TIME PERIOD FOR Z 1893 LOADING = 0.47902 SEC *
* SA/G PER 1893= 2.088, LOAD FACTOR= 1.000 *
* FACTOR V PER 1893 AT GL= 0.0939 X 8836.63 *
* FACTOR V PER 1893 AT 30 M= 0.0470 X 8836.63 *
* FACTOR V PER 1893= 0.0892 X 8836.63 *
* *
*********************************************************

368. LOAD LIST 201 TO 225

369. START CONCRETE DESIGN
CONCRETE DESIGN
370. CODE INDIAN
371. RATIO 2.5 MEMB 288 TO 311 350 TO 373 412 TO 435 474 TO 477
372. FYSEC 500000 ALL
373. FYMAIN 500000 ALL
374. FC 25000 ALL
375. CLEAR 0.04 MEMB 288 TO 311 350 TO 373 412 TO 435 474 TO 477
376. CLEAR 0.025 MEMB 312 TO 349 374 TO 411 436 TO 473 478 TO 544
377. RATIO 1.3 MEMB 312 TO 349 374 TO 411 436 TO 473 478 TO 544
378. TORSION 0 MEMB 312 TO 349 374 TO 411 436 TO 473 478 TO 544
379. DESIGN BEAM 312 TO 349 498 TO 525

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 9 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 10

BEAM

====================================================
IS 456 - 2000 B E A M D E S I G N R E S U L T S
====================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 312 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4150.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1037.5 mm 2075.0 mm 3112.5 mm 4150.0 mm
----------------------------------------------------------------------------
TOP 738.19 270.10 0.00 237.15 676.76
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 491.08 358.48 237.15 237.15 345.73

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1037.5 mm 2075.0 mm 3112.5 mm 4150.0 mm
----------------------------------------------------------------------------
TOP 10-10d 4-10d 4-10d 4-10d 9-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 7-10d 5-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 632.5 mm AWAY FROM START SUPPORT

VY = 76.81 MX = -0.45 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 634.4 mm AWAY FROM END SUPPORT

VY = -82.16 MX = -0.12 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 10 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 11

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 313 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4250.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 590.88 237.15 0.00 237.15 584.46
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 264.87 237.15 237.15 237.15 286.51

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 2-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 69.47 MX = -0.17 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -68.10 MX = -0.01 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 314 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3930.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 11 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 12

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 982.5 mm 1965.0 mm 2947.5 mm 3930.0 mm
----------------------------------------------------------------------------
TOP 598.80 237.15 0.00 237.15 604.21
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 321.31 236.64 236.64 236.64 320.97

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 982.5 mm 1965.0 mm 2947.5 mm 3930.0 mm
----------------------------------------------------------------------------
TOP 8-10d 4-10d 4-10d 4-10d 8-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 70.85 MX = -0.10 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM END SUPPORT

VY = -71.17 MX = 0.08 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 315 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4370.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1092.5 mm 2185.0 mm 3277.5 mm 4370.0 mm
----------------------------------------------------------------------------
TOP 587.99 237.15 0.00 237.15 595.01
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 275.43 237.15 237.15 237.15 253.82

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 12 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 13

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1092.5 mm 2185.0 mm 3277.5 mm 4370.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 2-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 68.04 MX = 0.00 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -69.42 MX = 0.15 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 316 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4150.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1037.5 mm 2075.0 mm 3112.5 mm 4150.0 mm
----------------------------------------------------------------------------
TOP 684.34 237.15 0.00 270.17 737.45
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 345.75 237.15 237.15 359.37 493.27

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 13 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 14

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1037.5 mm 2075.0 mm 3112.5 mm 4150.0 mm
----------------------------------------------------------------------------
TOP 9-10d 4-10d 4-10d 4-10d 10-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 5-10d 4-10d 4-10d 5-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 634.4 mm AWAY FROM START SUPPORT

VY = 82.54 MX = 0.18 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 632.5 mm AWAY FROM END SUPPORT

VY = -76.67 MX = 0.51 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 317 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1600.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 638.58 482.74 342.78 237.15 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 500.19 426.81 355.82 294.82 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 14 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 15

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 6-12d 5-12d 4-12d 3-12d 3-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 7-10d 6-10d 5-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 63.56 MX = -0.14 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 318 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4250.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 426.91 237.15 0.00 237.15 409.87
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 330.89 237.15 237.15 237.15 358.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 4-12d 3-12d 3-12d 3-12d 4-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 4-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 15 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 16

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 42.49 MX = 0.11 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -40.05 MX = 0.22 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 319 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3930.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 982.5 mm 1965.0 mm 2947.5 mm 3930.0 mm
----------------------------------------------------------------------------
TOP 442.91 237.15 0.00 237.15 446.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 378.94 237.15 237.15 237.15 379.50

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 982.5 mm 1965.0 mm 2947.5 mm 3930.0 mm
----------------------------------------------------------------------------
TOP 4-12d 3-12d 3-12d 3-12d 4-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 4-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 46.00 MX = 0.12 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -46.17 MX = 0.11 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 16 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 17

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 320 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4370.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1092.5 mm 2185.0 mm 3277.5 mm 4370.0 mm
----------------------------------------------------------------------------
TOP 404.18 237.15 0.00 237.15 423.27
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 351.73 237.15 237.15 237.15 323.45

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1092.5 mm 2185.0 mm 3277.5 mm 4370.0 mm
----------------------------------------------------------------------------
TOP 4-12d 3-12d 3-12d 3-12d 4-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 4-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 38.95 MX = -0.13 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -41.48 MX = -0.02 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 321 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2550.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 17 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 18

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 532.19 311.01 237.15 0.00 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 392.29 270.54 236.64 236.64 236.64

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 7-10d 4-10d 4-10d 4-10d 4-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 59.94 MX = -0.24 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 322 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1600.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 634.50 474.91 332.35 237.15 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 485.60 415.70 348.93 292.76 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 18 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 19

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 6-12d 5-12d 3-12d 3-12d 3-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 7-10d 6-10d 5-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 65.28 MX = 0.00 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 323 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4250.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 509.13 237.15 0.00 237.15 516.16
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 271.78 237.15 237.15 237.15 284.39

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 7-10d 4-10d 4-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 19 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 20

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 58.89 MX = -0.53 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM END SUPPORT

VY = -58.67 MX = -0.40 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 324 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2000.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 545.65 358.60 236.64 236.64 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 321.25 260.58 236.64 236.64 236.64

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 7-10d 5-10d 4-10d 4-10d 4-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 63.57 MX = -0.77 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 20 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 21

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 325 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2370.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 592.5 mm 1185.0 mm 1777.5 mm 2370.0 mm
----------------------------------------------------------------------------
TOP 586.22 328.17 237.15 237.15 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.76 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 592.5 mm 1185.0 mm 1777.5 mm 2370.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 3-16d 3-16d 2-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 69.92 MX = 0.15 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

*** WARNING:LENGTH TO DEPTH RATIO FOR MEMBER 326 IS LESS THAN 2.5.
DEEP BEAM IS NOT DESIGNED. ASSUMING IT TO BE A PART OF A
CONTINUOUS BEAM AND AWAY FROM THE CRITICAL SECTION FOR
ENHANCED SHEAR, ORDINARY SHEAR CHECK IS PERFORMED.,
OTHERWISE PROVIDE ENSH AND RENSH PARAMETERS ***

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 21 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 22

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 326 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 500.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 125.0 mm 250.0 mm 375.0 mm 500.0 mm
----------------------------------------------------------------------------
TOP 714.70 615.26 523.47 439.67 358.58
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 296.63 296.65 296.41 295.90 295.12

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 125.0 mm 250.0 mm 375.0 mm 500.0 mm
----------------------------------------------------------------------------
TOP 10-10d 8-10d 7-10d 6-10d 5-10d
REINF. 2 layer(s) 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 632.5 mm AWAY FROM START SUPPORT

VY = -87.96 MX = 0.78 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 327 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4150.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 22 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 23

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1037.5 mm 2075.0 mm 3112.5 mm 4150.0 mm
----------------------------------------------------------------------------
TOP 648.34 236.64 0.00 236.64 613.22
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 435.34 333.36 236.64 236.64 296.92

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1037.5 mm 2075.0 mm 3112.5 mm 4150.0 mm
----------------------------------------------------------------------------
TOP 6-12d 3-12d 3-12d 3-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 71.95 MX = 0.08 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -77.43 MX = 0.42 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 328 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4250.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 533.12 237.15 0.00 237.15 564.17
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 23 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 24

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1062.5 mm 2125.0 mm 3187.5 mm 4250.0 mm
----------------------------------------------------------------------------
TOP 5-12d 3-12d 3-12d 3-12d 5-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 64.14 MX = 0.10 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -65.69 MX = 0.26 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 329 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2000.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 623.16 363.43 237.15 237.15 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 249.40 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 24 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 25

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 8-10d 5-10d 4-10d 4-10d 4-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 81.06 MX = 1.01 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 330 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2370.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 592.5 mm 1185.0 mm 1777.5 mm 2370.0 mm
----------------------------------------------------------------------------
TOP 632.78 340.82 237.15 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 592.5 mm 1185.0 mm 1777.5 mm 2370.0 mm
----------------------------------------------------------------------------
TOP 6-12d 4-12d 3-12d 3-12d 3-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 25 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 26

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 77.69 MX = -0.06 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

*** WARNING:LENGTH TO DEPTH RATIO FOR MEMBER 331 IS LESS THAN 2.5.
DEEP BEAM IS NOT DESIGNED. ASSUMING IT TO BE A PART OF A
CONTINUOUS BEAM AND AWAY FROM THE CRITICAL SECTION FOR
ENHANCED SHEAR, ORDINARY SHEAR CHECK IS PERFORMED.,
OTHERWISE PROVIDE ENSH AND RENSH PARAMETERS ***

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 331 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 500.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 125.0 mm 250.0 mm 375.0 mm 500.0 mm
----------------------------------------------------------------------------
TOP 735.48 632.35 531.08 443.86 361.06
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 253.43 259.67 264.78 268.75 271.58

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 125.0 mm 250.0 mm 375.0 mm 500.0 mm
----------------------------------------------------------------------------
TOP 10-10d 9-10d 7-10d 6-10d 5-10d
REINF. 2 layer(s) 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 632.5 mm AWAY FROM START SUPPORT

VY = -88.89 MX = -1.63 LD= 207
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 26 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 27

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 332 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3815.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 588.55 236.64 0.00 236.64 521.27
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 425.20 329.32 236.64 236.64 280.58

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 2-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 68.40 MX = 0.78 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -73.24 MX = 0.80 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 333 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 27 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 28

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 475.49 237.15 237.15 237.15 499.16
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 317.63 236.64 0.00 236.64 302.20

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 7-10d 4-10d 4-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 70.17 MX = -0.60 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM END SUPPORT

VY = -73.84 MX = -0.57 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

*** WARNING:LENGTH TO DEPTH RATIO FOR MEMBER 334 IS LESS THAN 2.5.
DEEP BEAM IS NOT DESIGNED. ASSUMING IT TO BE A PART OF A
CONTINUOUS BEAM AND AWAY FROM THE CRITICAL SECTION FOR
ENHANCED SHEAR, ORDINARY SHEAR CHECK IS PERFORMED.,
OTHERWISE PROVIDE ENSH AND RENSH PARAMETERS ***

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 334 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1170.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 28 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 29

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 292.5 mm 585.0 mm 877.5 mm 1170.0 mm
----------------------------------------------------------------------------
TOP 613.70 415.78 244.74 237.15 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 244.82 256.50

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 292.5 mm 585.0 mm 877.5 mm 1170.0 mm
----------------------------------------------------------------------------
TOP 8-10d 6-10d 4-10d 4-10d 4-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 102.48 MX = -0.60 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 335 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3815.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 626.79 267.20 237.15 237.15 552.21
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 527.81 362.37 237.15 237.15 354.35

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 29 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 30

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 8-10d 4-10d 4-10d 4-10d 8-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 7-10d 5-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 67.99 MX = 0.16 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM END SUPPORT

VY = -73.98 MX = 0.11 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 336 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 507.79 261.68 237.15 261.62 509.20
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 402.46 236.64 0.00 236.64 399.24

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 30 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 31

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 7-10d 4-10d 4-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 3-12d 3-12d 3-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 71.81 MX = -0.30 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM END SUPPORT

VY = -72.23 MX = -0.31 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

*** WARNING:LENGTH TO DEPTH RATIO FOR MEMBER 337 IS LESS THAN 2.5.
DEEP BEAM IS NOT DESIGNED. ASSUMING IT TO BE A PART OF A
CONTINUOUS BEAM AND AWAY FROM THE CRITICAL SECTION FOR
ENHANCED SHEAR, ORDINARY SHEAR CHECK IS PERFORMED.,
OTHERWISE PROVIDE ENSH AND RENSH PARAMETERS ***

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 337 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1170.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 292.5 mm 585.0 mm 877.5 mm 1170.0 mm
----------------------------------------------------------------------------
TOP 625.48 441.50 276.20 236.64 236.64
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 321.34 296.12 266.24 259.51 246.35

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 31 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 32

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 292.5 mm 585.0 mm 877.5 mm 1170.0 mm
----------------------------------------------------------------------------
TOP 8-10d 6-10d 4-10d 4-10d 4-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 98.73 MX = 0.21 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 338 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3815.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 700.22 297.96 237.15 237.15 601.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 585.48 390.17 235.62 235.62 395.80

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 9-10d 4-10d 4-10d 4-10d 8-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 3-16d 3-16d 3-16d 3-16d 3-16d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 32 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 33

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 634.4 mm AWAY FROM START SUPPORT

VY = 72.62 MX = -0.06 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM END SUPPORT

VY = -78.23 MX = -0.11 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 339 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 577.97 265.61 235.62 265.64 581.97
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 442.50 236.64 0.00 236.64 434.57

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 3-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 3-12d 3-12d 3-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 85.70 MX = 0.09 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -86.80 MX = 0.07 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 33 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 34

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 340 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1300.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 325.0 mm 650.0 mm 975.0 mm 1300.0 mm
----------------------------------------------------------------------------
TOP 642.88 456.55 291.16 237.15 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 384.91 329.90 269.84 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 325.0 mm 650.0 mm 975.0 mm 1300.0 mm
----------------------------------------------------------------------------
TOP 6-12d 5-12d 3-12d 3-12d 3-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 5-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 88.98 MX = -0.51 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 341 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3815.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 34 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 35

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 700.83 299.37 237.15 237.15 610.79
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 590.47 392.31 235.62 235.62 394.37

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 9-10d 4-10d 4-10d 4-10d 8-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 3-16d 3-16d 3-16d 3-16d 3-16d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 634.4 mm AWAY FROM START SUPPORT

VY = 72.46 MX = 0.06 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM END SUPPORT

VY = -78.90 MX = 0.14 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 342 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 599.87 265.87 0.00 237.15 526.97
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 439.18 237.15 237.15 246.29 472.65

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 35 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 36

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 2-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 6-10d 4-10d 4-10d 4-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 91.05 MX = -0.71 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -82.08 MX = -0.67 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 343 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3730.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 932.5 mm 1865.0 mm 2797.5 mm 3730.0 mm
----------------------------------------------------------------------------
TOP 527.26 236.64 236.64 330.10 655.73
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 455.44 236.64 236.64 358.86 629.28

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 36 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 37

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 932.5 mm 1865.0 mm 2797.5 mm 3730.0 mm
----------------------------------------------------------------------------
TOP 5-12d 3-12d 3-12d 3-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-12d 3-12d 3-12d 4-12d 6-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM START SUPPORT

VY = 63.25 MX = 0.42 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -60.57 MX = 0.38 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 344 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3815.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 627.02 269.34 237.15 237.15 567.02
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 534.19 364.90 237.15 237.15 351.01

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 37 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 38

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 8-10d 4-10d 4-10d 4-10d 8-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 7-10d 5-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 67.59 MX = -0.23 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM END SUPPORT

VY = -74.97 MX = -0.15 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 345 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 535.56 259.81 237.15 237.15 431.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 389.43 237.15 0.00 237.15 459.75

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 38 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 39

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 7-10d 4-10d 4-10d 4-10d 6-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 4-10d 4-10d 4-10d 6-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 80.32 MX = 0.25 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM END SUPPORT

VY = 74.30 MX = 0.25 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 346 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3730.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 932.5 mm 1865.0 mm 2797.5 mm 3730.0 mm
----------------------------------------------------------------------------
TOP 463.11 237.15 237.15 297.00 599.16
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 417.29 235.62 235.62 323.85 563.94

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 39 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 40

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 932.5 mm 1865.0 mm 2797.5 mm 3730.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 3-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 3-12d 3-12d 3-12d 5-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 57.42 MX = -0.02 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -56.49 MX = 0.02 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 347 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3815.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 588.15 236.64 0.00 236.64 528.04
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 432.90 334.56 236.64 236.64 282.29

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 40 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 41

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 953.7 mm 1907.5 mm 2861.2 mm 3815.0 mm
----------------------------------------------------------------------------
TOP 3-16d 3-16d 2-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM START SUPPORT

VY = 68.40 MX = -0.77 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -74.04 MX = -0.75 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 348 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 485.10 237.15 237.15 237.15 498.54
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 320.50 236.64 0.00 236.64 310.97

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 41 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 42

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 7-10d 4-10d 4-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM START SUPPORT

VY = 71.54 MX = 0.79 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM END SUPPORT

VY = -73.64 MX = 0.81 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

*** WARNING:LENGTH TO DEPTH RATIO FOR MEMBER 349 IS LESS THAN 2.5.
DEEP BEAM IS NOT DESIGNED. ASSUMING IT TO BE A PART OF A
CONTINUOUS BEAM AND AWAY FROM THE CRITICAL SECTION FOR
ENHANCED SHEAR, ORDINARY SHEAR CHECK IS PERFORMED.,
OTHERWISE PROVIDE ENSH AND RENSH PARAMETERS ***

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 349 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1230.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 307.5 mm 615.0 mm 922.5 mm 1230.0 mm
----------------------------------------------------------------------------
TOP 611.95 411.49 239.25 237.15 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 238.68 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 42 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 43

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 307.5 mm 615.0 mm 922.5 mm 1230.0 mm
----------------------------------------------------------------------------
TOP 8-10d 6-10d 4-10d 4-10d 4-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM START SUPPORT

VY = 98.65 MX = 0.51 LD= 208
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 498 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2560.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 640.0 mm 1280.0 mm 1920.0 mm 2560.0 mm
----------------------------------------------------------------------------
TOP 236.64 0.00 236.64 326.34 644.47
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 256.37 236.64 294.93 343.90 397.81

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 640.0 mm 1280.0 mm 1920.0 mm 2560.0 mm
----------------------------------------------------------------------------
TOP 3-12d 3-12d 3-12d 3-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 4-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 43 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 44

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -79.53 MX = -0.59 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 499 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2560.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 640.0 mm 1280.0 mm 1920.0 mm 2560.0 mm
----------------------------------------------------------------------------
TOP 237.15 0.00 237.15 375.31 693.07
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 246.50 237.15 306.47 403.58 504.44

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 640.0 mm 1280.0 mm 1920.0 mm 2560.0 mm
----------------------------------------------------------------------------
TOP 4-10d 4-10d 4-10d 5-10d 9-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 4-10d 4-10d 4-10d 6-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 634.4 mm AWAY FROM END SUPPORT

VY = -78.49 MX = 0.21 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 44 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 45

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 500 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1600.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 134.64 134.64 253.76 355.54 436.22

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 4-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 501 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2550.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 237.15 0.00 237.15 308.30 529.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 236.64 236.64 236.64 269.51 390.77

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 45 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 46

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 4-10d 4-10d 4-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 640.0 mm AWAY FROM END SUPPORT

VY = -59.89 MX = 0.02 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 502 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2550.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 237.15 0.00 237.15 328.44 578.58
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 286.67 237.15 237.15 250.67 355.09

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 3-16d 2-16d 3-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 46 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 47

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -66.77 MX = 0.13 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 503 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 135.15 135.15 135.15 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 504 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2550.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 47 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 48

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 348.68 351.63 289.35 168.58 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 637.5 mm 1275.0 mm 1912.5 mm 2550.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 5-10d 4-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 505 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1170.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 292.5 mm 585.0 mm 877.5 mm 1170.0 mm
----------------------------------------------------------------------------
TOP 135.15 135.15 135.15 135.15 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 135.15 135.15 135.15 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 48 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 49

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 292.5 mm 585.0 mm 877.5 mm 1170.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 506 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1930.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 482.5 mm 965.0 mm 1447.5 mm 1930.0 mm
----------------------------------------------------------------------------
TOP 0.00 237.15 237.15 396.08 596.56
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 245.84 296.58

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 482.5 mm 965.0 mm 1447.5 mm 1930.0 mm
----------------------------------------------------------------------------
TOP 2-16d 3-16d 3-16d 3-16d 3-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 637.0 mm AWAY FROM END SUPPORT

VY = -68.22 MX = -0.79 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 49 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 50

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 507 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1930.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 482.5 mm 965.0 mm 1447.5 mm 1930.0 mm
----------------------------------------------------------------------------
TOP 0.00 237.15 237.15 406.71 685.04
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 482.5 mm 965.0 mm 1447.5 mm 1930.0 mm
----------------------------------------------------------------------------
TOP 4-10d 4-10d 4-10d 6-10d 9-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 634.4 mm AWAY FROM END SUPPORT

VY = -85.85 MX = 1.18 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 508 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1300.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 50 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 51

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 325.0 mm 650.0 mm 975.0 mm 1300.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 134.64 134.64 215.26 307.88 388.13

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 325.0 mm 650.0 mm 975.0 mm 1300.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 4-10d 5-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 509 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2430.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 607.5 mm 1215.0 mm 1822.5 mm 2430.0 mm
----------------------------------------------------------------------------
TOP 237.15 237.15 237.15 427.17 750.91
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 235.62 235.62 341.11 461.11 583.51

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 51 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 52

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 607.5 mm 1215.0 mm 1822.5 mm 2430.0 mm
----------------------------------------------------------------------------
TOP 4-10d 4-10d 4-10d 6-10d 10-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 3-16d 3-16d 3-16d 3-16d 3-16d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 632.5 mm AWAY FROM END SUPPORT

VY = -81.14 MX = -0.45 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 510 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2430.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 607.5 mm 1215.0 mm 1822.5 mm 2430.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 332.84 330.69 270.11 156.93 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 607.5 mm 1215.0 mm 1822.5 mm 2430.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 52 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 53

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 511 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2000.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 135.15 135.15 135.15 135.15 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 135.15 148.42 135.15 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 512 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2000.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 0.00 237.15 237.15 381.07 620.98
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 53 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 54

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 4-10d 4-10d 4-10d 5-10d 8-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 636.9 mm AWAY FROM END SUPPORT

VY = -76.01 MX = 0.25 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 513 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2000.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 0.00 237.15 237.15 376.04 637.35
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 237.15 237.15 237.15 237.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 500.0 mm 1000.0 mm 1500.0 mm 2000.0 mm
----------------------------------------------------------------------------
TOP 3-12d 3-12d 3-12d 4-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 54 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 55

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -81.20 MX = 0.10 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 514 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3730.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 932.5 mm 1865.0 mm 2797.5 mm 3730.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 184.61 250.25 184.61 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 932.5 mm 1865.0 mm 2797.5 mm 3730.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 4-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 515 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2050.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 55 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 56

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 512.5 mm 1025.0 mm 1537.5 mm 2050.0 mm
----------------------------------------------------------------------------
TOP 358.00 237.15 237.15 0.00 237.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 295.27 237.15 237.15 237.15 300.65

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 512.5 mm 1025.0 mm 1537.5 mm 2050.0 mm
----------------------------------------------------------------------------
TOP 5-10d 4-10d 4-10d 4-10d 4-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 4-10d 4-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 516 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3650.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 912.5 mm 1825.0 mm 2737.5 mm 3650.0 mm
----------------------------------------------------------------------------
TOP 361.64 237.15 237.15 276.90 677.39
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 272.06 236.64 236.64 354.91 437.61

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 56 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 57

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 912.5 mm 1825.0 mm 2737.5 mm 3650.0 mm
----------------------------------------------------------------------------
TOP 4-12d 3-12d 3-12d 3-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 4-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -73.14 MX = -1.31 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 517 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1230.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 307.5 mm 615.0 mm 922.5 mm 1230.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 135.15 260.82 383.18 498.66

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 307.5 mm 615.0 mm 922.5 mm 1230.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 4-10d 5-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 57 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 58

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 518 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2500.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 452.13 424.96 333.84 188.52 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 4-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 519 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2500.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 236.64 335.14 655.02
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 257.84 236.64 301.37 346.13 400.20

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 58 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 59

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-12d 3-12d 3-12d 3-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 4-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -81.27 MX = 0.54 LD= 209
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 520 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2050.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 512.5 mm 1025.0 mm 1537.5 mm 2050.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 134.64 174.92 264.68 316.66 327.83

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 512.5 mm 1025.0 mm 1537.5 mm 2050.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 59 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 60

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 521 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1600.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 237.15 237.15 342.44 483.46 639.69
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 237.15 295.64 356.77 427.54 501.10

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 3-12d 3-12d 4-12d 5-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 5-10d 6-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -63.71 MX = -0.08 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 522 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1600.0 mm SIZE: 300.0 mm X 500.0 mm COVER: 30.0 mm

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 60 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 61

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 237.15 237.15 341.37 493.21 658.42
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 242.12 297.95 350.12 413.64 480.92

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 3-12d 3-12d 4-12d 5-12d 6-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 4-10d 5-10d 6-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c @ 170 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 639.0 mm AWAY FROM END SUPPORT

VY = -67.16 MX = 0.93 LD= 206
Provide 2 Legged 8d @ 170 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 523 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2405.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 135.15 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 135.15 135.15 135.15 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 61 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 62

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 601.3 mm 1202.5 mm 1803.8 mm 2405.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 524 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1600.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 432.33 368.50 281.75 175.39 134.64

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 400.0 mm 800.0 mm 1200.0 mm 1600.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 4-12d 3-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 62 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 63

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 525 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1230.0 mm SIZE: 300.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 307.5 mm 615.0 mm 922.5 mm 1230.0 mm
----------------------------------------------------------------------------
TOP 135.15 135.15 135.15 135.15 135.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 135.15 139.80 146.65 139.80 135.15

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 307.5 mm 615.0 mm 922.5 mm 1230.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------

============================================================================

********************END OF BEAM DESIGN RESULTS********************

380. DESIGN COLUMN 288 TO 311 350 TO 373 412 TO 435 474 TO 477

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 63 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 64

COLUMN

=========================================================
IS 456 - 2000 C O L U M N D E S I G N R E S U L T S
=========================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 288 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 158 SHORT COLUMN

REQD. STEEL AREA : 1085.86 Sq.mm.

REQD. CONCRETE AREA: 121414.14 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1773.11 Muz1 : 74.95 Muy1 : 74.95

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 158 Puz : 1835.23 Muz : 86.40 Muy : 86.40 IR: 0.87
============================================================================

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 64 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 65

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 289 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 160 SHORT COLUMN

REQD. STEEL AREA : 991.72 Sq.mm.

REQD. CONCRETE AREA: 121508.28 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1738.86 Muz1 : 77.51 Muy1 : 77.51

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 160 Puz : 1835.23 Muz : 95.57 Muy : 95.57 IR: 0.81
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 290 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 162 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 65 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 66

REQD. STEEL AREA : 956.20 Sq.mm.

REQD. CONCRETE AREA: 121543.80 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1725.94 Muz1 : 78.69 Muy1 : 78.69

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 162 Puz : 1835.23 Muz : 99.18 Muy : 99.18 IR: 0.79
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 291 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 164 SHORT COLUMN

REQD. STEEL AREA : 892.59 Sq.mm.

REQD. CONCRETE AREA: 111573.73 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (0.74%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1702.80 Muz1 : 65.30 Muy1 : 65.30

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 164 Puz : 1707.24 Muz : 67.46 Muy : 67.46 IR: 0.96

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 66 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 67

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 292 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 166 SHORT COLUMN

REQD. STEEL AREA : 1107.21 Sq.mm.

REQD. CONCRETE AREA: 121392.79 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1780.87 Muz1 : 90.70 Muy1 : 90.70

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 166 Puz : 1835.23 Muz : 107.94 Muy : 107.94 IR: 0.84
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 293 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 168 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 67 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 68

REQD. STEEL AREA : 1196.67 Sq.mm.

REQD. CONCRETE AREA: 121303.33 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1813.42 Muz1 : 88.97 Muy1 : 88.97

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 168 Puz : 1835.23 Muz : 98.82 Muy : 98.82 IR: 0.90
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 294 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 170 SHORT COLUMN

REQD. STEEL AREA : 1164.37 Sq.mm.

REQD. CONCRETE AREA: 121335.62 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1801.67 Muz1 : 90.98 Muy1 : 90.98

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 170 Puz : 1835.23 Muz : 104.13 Muy : 104.13 IR: 0.87

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 68 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 69

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 295 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 172 SHORT COLUMN

REQD. STEEL AREA : 900.00 Sq.mm.

REQD. CONCRETE AREA: 112499.94 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (0.74%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1705.50 Muz1 : 81.71 Muy1 : 81.71

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 172 Puz : 1707.24 Muz : 83.08 Muy : 83.08 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 296 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 174 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 69 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 70

REQD. STEEL AREA : 1075.50 Sq.mm.

REQD. CONCRETE AREA: 121424.50 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1769.34 Muz1 : 89.61 Muy1 : 89.61

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 174 Puz : 1835.23 Muz : 108.29 Muy : 108.29 IR: 0.82
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 297 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 176 SHORT COLUMN

REQD. STEEL AREA : 1322.78 Sq.mm.

REQD. CONCRETE AREA: 121177.22 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1859.29 Muz1 : 97.33 Muy1 : 97.33

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 176 Puz : 1871.79 Muz : 99.43 Muy : 99.43 IR: 0.97

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 70 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 71

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 298 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 178 SHORT COLUMN

REQD. STEEL AREA : 1337.17 Sq.mm.

REQD. CONCRETE AREA: 121162.83 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1864.52 Muz1 : 97.24 Muy1 : 97.24

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 178 Puz : 1871.79 Muz : 98.73 Muy : 98.73 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 299 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 180 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 71 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 72

REQD. STEEL AREA : 1016.95 Sq.mm.

REQD. CONCRETE AREA: 121483.05 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1748.04 Muz1 : 78.83 Muy1 : 78.83

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 180 Puz : 1835.23 Muz : 95.81 Muy : 95.81 IR: 0.82
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 300 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 182 SHORT COLUMN

REQD. STEEL AREA : 1078.95 Sq.mm.

REQD. CONCRETE AREA: 121421.05 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1770.59 Muz1 : 89.80 Muy1 : 89.80

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 182 Puz : 1835.23 Muz : 108.39 Muy : 108.39 IR: 0.82

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 72 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 73

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 301 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 184 SHORT COLUMN

REQD. STEEL AREA : 1328.28 Sq.mm.

REQD. CONCRETE AREA: 121171.72 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1861.29 Muz1 : 97.79 Muy1 : 97.79

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 184 Puz : 1871.79 Muz : 99.73 Muy : 99.73 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 302 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 186 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 73 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 74

REQD. STEEL AREA : 1327.33 Sq.mm.

REQD. CONCRETE AREA: 121172.66 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1860.94 Muz1 : 96.32 Muy1 : 96.32

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 186 Puz : 1871.79 Muz : 98.19 Muy : 98.19 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 303 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 188 SHORT COLUMN

REQD. STEEL AREA : 1058.81 Sq.mm.

REQD. CONCRETE AREA: 121441.20 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1763.27 Muz1 : 80.52 Muy1 : 80.52

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 188 Puz : 1835.23 Muz : 95.54 Muy : 95.54 IR: 0.84

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 74 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 75

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 304 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 190 SHORT COLUMN

REQD. STEEL AREA : 1108.49 Sq.mm.

REQD. CONCRETE AREA: 121391.52 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1781.34 Muz1 : 90.77 Muy1 : 90.77

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 190 Puz : 1835.23 Muz : 107.95 Muy : 107.95 IR: 0.84
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 305 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 192 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 75 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 76

REQD. STEEL AREA : 1199.99 Sq.mm.

REQD. CONCRETE AREA: 121300.02 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1814.62 Muz1 : 89.57 Muy1 : 89.57

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 192 Puz : 1835.23 Muz : 99.52 Muy : 99.52 IR: 0.89
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 306 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 194 SHORT COLUMN

REQD. STEEL AREA : 1116.35 Sq.mm.

REQD. CONCRETE AREA: 121383.65 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1784.20 Muz1 : 89.43 Muy1 : 89.43

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 194 Puz : 1835.23 Muz : 104.89 Muy : 104.89 IR: 0.85

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 76 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 77

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 307 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 196 SHORT COLUMN

REQD. STEEL AREA : 919.56 Sq.mm.

REQD. CONCRETE AREA: 121580.45 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1712.61 Muz1 : 83.30 Muy1 : 83.30

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 196 Puz : 1835.23 Muz : 108.43 Muy : 108.43 IR: 0.76
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 308 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 198 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 77 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 78

REQD. STEEL AREA : 1062.06 Sq.mm.

REQD. CONCRETE AREA: 121437.94 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1764.45 Muz1 : 74.94 Muy1 : 74.94

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 198 Puz : 1835.23 Muz : 87.84 Muy : 87.84 IR: 0.85
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 309 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 200 SHORT COLUMN

REQD. STEEL AREA : 1003.78 Sq.mm.

REQD. CONCRETE AREA: 121496.22 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1743.25 Muz1 : 78.03 Muy1 : 78.03

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 200 Puz : 1835.23 Muz : 95.54 Muy : 95.54 IR: 0.82

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 78 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 79

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 310 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 202 SHORT COLUMN

REQD. STEEL AREA : 979.05 Sq.mm.

REQD. CONCRETE AREA: 121520.95 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1734.26 Muz1 : 79.54 Muy1 : 79.54

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 202 Puz : 1835.23 Muz : 98.95 Muy : 98.95 IR: 0.80
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 311 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2700.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 204 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 79 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 80

REQD. STEEL AREA : 887.41 Sq.mm.

REQD. CONCRETE AREA: 110925.69 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (0.74%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1700.92 Muz1 : 65.18 Muy1 : 65.18

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 204 Puz : 1707.24 Muz : 67.60 Muy : 67.60 IR: 0.96
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 350 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 207 END JOINT: 206 SHORT COLUMN

REQD. STEEL AREA : 945.99 Sq.mm.

REQD. CONCRETE AREA: 121554.01 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1722.23 Muz1 : 83.28 Muy1 : 83.28

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 207
END JOINT: 206 Puz : 1835.23 Muz : 106.48 Muy : 106.48 IR: 0.77

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 80 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 81

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 351 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 209 END JOINT: 207 SHORT COLUMN

REQD. STEEL AREA : 1375.91 Sq.mm.

REQD. CONCRETE AREA: 121124.09 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1878.61 Muz1 : 98.10 Muy1 : 98.10

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 209
END JOINT: 207 Puz : 1963.22 Muz : 109.30 Muy : 109.30 IR: 0.90
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 352 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 208 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 81 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 82

REQD. STEEL AREA : 1448.09 Sq.mm.

REQD. CONCRETE AREA: 121051.91 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1904.87 Muz1 : 102.11 Muy1 : 102.11

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 208 Puz : 1963.22 Muz : 110.23 Muy : 110.23 IR: 0.92
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 353 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 207 END JOINT: 209 SHORT COLUMN

REQD. STEEL AREA : 1038.36 Sq.mm.

REQD. CONCRETE AREA: 121461.64 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1755.83 Muz1 : 85.24 Muy1 : 85.24

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 207
END JOINT: 209 Puz : 1835.23 Muz : 103.43 Muy : 103.43 IR: 0.82

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 82 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 83

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 354 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 167 SHORT COLUMN

REQD. STEEL AREA : 1339.95 Sq.mm.

REQD. CONCRETE AREA: 121160.05 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1865.53 Muz1 : 96.42 Muy1 : 96.42

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 167 Puz : 1871.79 Muz : 97.72 Muy : 97.72 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 355 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 169 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 83 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 84

REQD. STEEL AREA : 1510.61 Sq.mm.

REQD. CONCRETE AREA: 120989.39 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1927.61 Muz1 : 100.34 Muy1 : 100.34

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 169 Puz : 1963.22 Muz : 106.44 Muy : 106.44 IR: 0.94
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 356 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 171 SHORT COLUMN

REQD. STEEL AREA : 1659.40 Sq.mm.

REQD. CONCRETE AREA: 120840.59 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.48%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1981.73 Muz1 : 114.34 Muy1 : 114.34

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 171 Puz : 2036.35 Muz : 120.24 Muy : 120.24 IR: 0.94

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 84 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 85

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 357 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 173 SHORT COLUMN

REQD. STEEL AREA : 1153.95 Sq.mm.

REQD. CONCRETE AREA: 121346.05 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1797.87 Muz1 : 87.41 Muy1 : 87.41

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 173 Puz : 1835.23 Muz : 99.25 Muy : 99.25 IR: 0.88
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 358 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 175 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 85 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 86

REQD. STEEL AREA : 1310.78 Sq.mm.

REQD. CONCRETE AREA: 121189.22 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1854.92 Muz1 : 95.25 Muy1 : 95.25

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 175 Puz : 1871.79 Muz : 97.79 Muy : 97.79 IR: 0.97
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 359 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 177 SHORT COLUMN

REQD. STEEL AREA : 1694.48 Sq.mm.

REQD. CONCRETE AREA: 120805.52 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.48%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1994.49 Muz1 : 110.84 Muy1 : 110.84

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 177 Puz : 2036.35 Muz : 115.48 Muy : 115.48 IR: 0.96

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 86 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 87

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 360 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 179 SHORT COLUMN

REQD. STEEL AREA : 1777.04 Sq.mm.

REQD. CONCRETE AREA: 120722.96 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.48%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 2024.52 Muz1 : 111.69 Muy1 : 111.69

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 179 Puz : 2036.35 Muz : 112.82 Muy : 112.82 IR: 0.99
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 361 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 181 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 87 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 88

REQD. STEEL AREA : 1061.41 Sq.mm.

REQD. CONCRETE AREA: 121438.59 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1764.21 Muz1 : 83.97 Muy1 : 83.97

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 181 Puz : 1835.23 Muz : 100.11 Muy : 100.11 IR: 0.83
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 362 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 183 SHORT COLUMN

REQD. STEEL AREA : 1302.10 Sq.mm.

REQD. CONCRETE AREA: 121197.90 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1851.77 Muz1 : 94.98 Muy1 : 94.98

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 183 Puz : 1871.79 Muz : 97.89 Muy : 97.89 IR: 0.97

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 88 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 89

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 363 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 185 SHORT COLUMN

REQD. STEEL AREA : 1706.40 Sq.mm.

REQD. CONCRETE AREA: 120793.60 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.48%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1998.83 Muz1 : 111.39 Muy1 : 111.39

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 185 Puz : 2036.35 Muz : 115.57 Muy : 115.57 IR: 0.96
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 364 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 187 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 89 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 90

REQD. STEEL AREA : 1732.20 Sq.mm.

REQD. CONCRETE AREA: 120767.80 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.48%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 2008.21 Muz1 : 110.10 Muy1 : 110.10

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 187 Puz : 2036.35 Muz : 113.07 Muy : 113.07 IR: 0.97
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 365 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 189 SHORT COLUMN

REQD. STEEL AREA : 1050.34 Sq.mm.

REQD. CONCRETE AREA: 121449.66 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1760.19 Muz1 : 82.80 Muy1 : 82.80

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 189 Puz : 1835.23 Muz : 99.11 Muy : 99.11 IR: 0.83

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 90 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 91

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 366 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 191 SHORT COLUMN

REQD. STEEL AREA : 1347.36 Sq.mm.

REQD. CONCRETE AREA: 121152.64 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1868.23 Muz1 : 96.81 Muy1 : 96.81

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 191 Puz : 1871.79 Muz : 97.81 Muy : 97.81 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 367 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 193 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 91 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 92

REQD. STEEL AREA : 1507.65 Sq.mm.

REQD. CONCRETE AREA: 120992.34 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1926.53 Muz1 : 100.30 Muy1 : 100.30

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 217
END JOINT: 193 Puz : 1963.22 Muz : 106.52 Muy : 106.52 IR: 0.94
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 368 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 224 SHORT COLUMN

REQD. STEEL AREA : 1591.08 Sq.mm.

REQD. CONCRETE AREA: 120908.91 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1956.88 Muz1 : 111.51 Muy1 : 111.51

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 224 Puz : 1963.22 Muz : 114.29 Muy : 114.29 IR: 0.97

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 92 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 93

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 369 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 197 SHORT COLUMN

REQD. STEEL AREA : 1126.49 Sq.mm.

REQD. CONCRETE AREA: 121373.51 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1787.89 Muz1 : 86.29 Muy1 : 86.29

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 197 Puz : 1835.23 Muz : 99.36 Muy : 99.36 IR: 0.86
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 370 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 206 END JOINT: 226 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 93 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 94

REQD. STEEL AREA : 922.49 Sq.mm.

REQD. CONCRETE AREA: 121577.51 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1713.68 Muz1 : 83.48 Muy1 : 83.48

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 206
END JOINT: 226 Puz : 1835.23 Muz : 108.52 Muy : 108.52 IR: 0.76
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 371 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 209 END JOINT: 227 SHORT COLUMN

REQD. STEEL AREA : 1385.37 Sq.mm.

REQD. CONCRETE AREA: 121114.63 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1882.05 Muz1 : 98.41 Muy1 : 98.41

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 209
END JOINT: 227 Puz : 1963.22 Muz : 109.23 Muy : 109.23 IR: 0.90

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 94 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 95

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 372 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 228 SHORT COLUMN

REQD. STEEL AREA : 1484.25 Sq.mm.

REQD. CONCRETE AREA: 121015.75 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1918.02 Muz1 : 103.55 Muy1 : 103.55

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 228 Puz : 1963.22 Muz : 110.22 Muy : 110.22 IR: 0.94
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 373 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 206 END JOINT: 229 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 95 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 96

REQD. STEEL AREA : 1059.10 Sq.mm.

REQD. CONCRETE AREA: 121440.90 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1763.37 Muz1 : 86.14 Muy1 : 86.14

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 206
END JOINT: 229 Puz : 1835.23 Muz : 103.47 Muy : 103.47 IR: 0.83
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 412 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 207 END JOINT: 230 SHORT COLUMN

REQD. STEEL AREA : 1146.47 Sq.mm.

REQD. CONCRETE AREA: 121353.53 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1795.15 Muz1 : 77.20 Muy1 : 77.20

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 207
END JOINT: 230 Puz : 1835.23 Muz : 85.64 Muy : 85.64 IR: 0.90

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 96 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 97

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 413 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 209 END JOINT: 231 SHORT COLUMN

REQD. STEEL AREA : 1215.54 Sq.mm.

REQD. CONCRETE AREA: 121284.46 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1820.28 Muz1 : 80.60 Muy1 : 80.60

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 209
END JOINT: 231 Puz : 1835.23 Muz : 86.00 Muy : 86.00 IR: 0.93
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 414 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 232 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 97 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 98

REQD. STEEL AREA : 1302.39 Sq.mm.

REQD. CONCRETE AREA: 121197.61 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1851.87 Muz1 : 83.81 Muy1 : 83.81

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 232 Puz : 1871.79 Muz : 86.46 Muy : 86.46 IR: 0.97
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 415 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 207 END JOINT: 233 SHORT COLUMN

REQD. STEEL AREA : 1072.85 Sq.mm.

REQD. CONCRETE AREA: 121427.15 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1768.38 Muz1 : 73.61 Muy1 : 73.61

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 207
END JOINT: 233 Puz : 1835.23 Muz : 85.48 Muy : 85.48 IR: 0.86

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 98 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 99

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 416 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 234 SHORT COLUMN

REQD. STEEL AREA : 1042.72 Sq.mm.

REQD. CONCRETE AREA: 121457.28 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1757.41 Muz1 : 70.95 Muy1 : 70.95

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 234 Puz : 1835.23 Muz : 84.02 Muy : 84.02 IR: 0.84
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 417 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 235 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 99 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 100

REQD. STEEL AREA : 1053.24 Sq.mm.

REQD. CONCRETE AREA: 121446.76 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1761.24 Muz1 : 72.76 Muy1 : 72.76

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 235 Puz : 1835.23 Muz : 85.57 Muy : 85.57 IR: 0.84
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 418 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 236 SHORT COLUMN

REQD. STEEL AREA : 1043.02 Sq.mm.

REQD. CONCRETE AREA: 121456.98 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1757.52 Muz1 : 70.85 Muy1 : 70.85

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 236 Puz : 1835.23 Muz : 83.88 Muy : 83.88 IR: 0.84

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 100 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 101

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 419 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 237 SHORT COLUMN

REQD. STEEL AREA : 743.96 Sq.mm.

REQD. CONCRETE AREA: 92994.83 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (0.66%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1648.74 Muz1 : 55.72 Muy1 : 55.72

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 237 Puz : 1670.67 Muz : 59.71 Muy : 59.71 IR: 0.93
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 420 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 238 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 101 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 102

REQD. STEEL AREA : 836.61 Sq.mm.

REQD. CONCRETE AREA: 104576.32 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (0.74%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1682.44 Muz1 : 62.74 Muy1 : 62.74

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 238 Puz : 1707.24 Muz : 67.65 Muy : 67.65 IR: 0.92
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 421 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 239 SHORT COLUMN

REQD. STEEL AREA : 1037.47 Sq.mm.

REQD. CONCRETE AREA: 121462.52 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1755.51 Muz1 : 74.17 Muy1 : 74.17

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 239 Puz : 1835.23 Muz : 88.32 Muy : 88.32 IR: 0.84

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 102 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 103

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 422 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 240 SHORT COLUMN

REQD. STEEL AREA : 1387.11 Sq.mm.

REQD. CONCRETE AREA: 121112.89 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1882.69 Muz1 : 85.53 Muy1 : 85.53

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 240 Puz : 1963.22 Muz : 98.79 Muy : 98.79 IR: 0.86
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 423 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 241 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 103 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 104

REQD. STEEL AREA : 770.44 Sq.mm.

REQD. CONCRETE AREA: 96304.80 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (0.66%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1658.37 Muz1 : 53.84 Muy1 : 53.84

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 241 Puz : 1670.67 Muz : 56.07 Muy : 56.07 IR: 0.96
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 424 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 242 SHORT COLUMN

REQD. STEEL AREA : 843.20 Sq.mm.

REQD. CONCRETE AREA: 105400.05 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (0.74%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1684.84 Muz1 : 63.16 Muy1 : 63.16

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 242 Puz : 1707.24 Muz : 67.75 Muy : 67.75 IR: 0.93

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 104 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 105

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 425 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 217 END JOINT: 243 SHORT COLUMN

REQD. STEEL AREA : 1043.29 Sq.mm.

REQD. CONCRETE AREA: 121456.71 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1757.62 Muz1 : 76.67 Muy1 : 76.67

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 243 Puz : 1835.23 Muz : 88.54 Muy : 88.54 IR: 0.84
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 426 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 244 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 105 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 106

REQD. STEEL AREA : 1406.36 Sq.mm.

REQD. CONCRETE AREA: 121093.64 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.31%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1889.69 Muz1 : 86.57 Muy1 : 86.57

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 244 Puz : 1963.22 Muz : 98.96 Muy : 98.96 IR: 0.87
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 427 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 245 SHORT COLUMN

REQD. STEEL AREA : 785.79 Sq.mm.

REQD. CONCRETE AREA: 98224.34 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (0.66%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1663.96 Muz1 : 54.81 Muy1 : 54.81

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 245 Puz : 1670.67 Muz : 56.27 Muy : 56.27 IR: 0.97

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 106 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 107

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 428 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 246 SHORT COLUMN

REQD. STEEL AREA : 1054.81 Sq.mm.

REQD. CONCRETE AREA: 121445.19 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1761.81 Muz1 : 71.59 Muy1 : 71.59

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 246 Puz : 1835.23 Muz : 84.09 Muy : 84.09 IR: 0.85
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 429 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 215 END JOINT: 247 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 107 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 108

REQD. STEEL AREA : 1028.19 Sq.mm.

REQD. CONCRETE AREA: 121471.81 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1752.13 Muz1 : 71.77 Muy1 : 71.77

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 215
END JOINT: 247 Puz : 1835.23 Muz : 85.82 Muy : 85.82 IR: 0.83
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 430 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 216 END JOINT: 248 SHORT COLUMN

REQD. STEEL AREA : 1054.75 Sq.mm.

REQD. CONCRETE AREA: 121445.25 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1761.79 Muz1 : 71.52 Muy1 : 71.52

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 216
END JOINT: 248 Puz : 1835.23 Muz : 84.01 Muy : 84.01 IR: 0.85

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 108 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 109

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 431 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 214 END JOINT: 249 SHORT COLUMN

REQD. STEEL AREA : 754.38 Sq.mm.

REQD. CONCRETE AREA: 94297.81 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (0.66%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 255 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1652.53 Muz1 : 56.30 Muy1 : 56.30

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 214
END JOINT: 249 Puz : 1670.67 Muz : 59.78 Muy : 59.78 IR: 0.94
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 432 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 206 END JOINT: 250 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 109 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 110

REQD. STEEL AREA : 1127.48 Sq.mm.

REQD. CONCRETE AREA: 121372.52 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1788.25 Muz1 : 76.24 Muy1 : 76.24

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 206
END JOINT: 250 Puz : 1835.23 Muz : 85.55 Muy : 85.55 IR: 0.88
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 433 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 209 END JOINT: 251 SHORT COLUMN

REQD. STEEL AREA : 1203.92 Sq.mm.

REQD. CONCRETE AREA: 121296.08 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1816.05 Muz1 : 80.12 Muy1 : 80.12

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 209
END JOINT: 251 Puz : 1835.23 Muz : 86.07 Muy : 86.07 IR: 0.93

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 110 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 111

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 434 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 252 SHORT COLUMN

REQD. STEEL AREA : 1319.19 Sq.mm.

REQD. CONCRETE AREA: 121180.81 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.11%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1857.98 Muz1 : 84.52 Muy1 : 84.52

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 252 Puz : 1871.79 Muz : 86.42 Muy : 86.42 IR: 0.98
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 435 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3150.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 206 END JOINT: 253 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 111 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 112

REQD. STEEL AREA : 1070.79 Sq.mm.

REQD. CONCRETE AREA: 121429.21 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1767.63 Muz1 : 73.49 Muy1 : 73.49

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 206
END JOINT: 253 Puz : 1835.23 Muz : 85.44 Muy : 85.44 IR: 0.86
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 474 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2850.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 254 SHORT COLUMN

REQD. STEEL AREA : 958.22 Sq.mm.

REQD. CONCRETE AREA: 121541.78 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1726.68 Muz1 : 67.39 Muy1 : 67.39

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 254 Puz : 1835.23 Muz : 84.67 Muy : 84.67 IR: 0.79

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 112 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 113

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 475 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2850.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 209 END JOINT: 255 SHORT COLUMN

REQD. STEEL AREA : 1034.47 Sq.mm.

REQD. CONCRETE AREA: 121465.53 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1754.41 Muz1 : 71.10 Muy1 : 71.10

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 209
END JOINT: 255 Puz : 1835.23 Muz : 84.66 Muy : 84.66 IR: 0.84
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 476 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2850.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 208 END JOINT: 256 SHORT COLUMN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 113 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 114

REQD. STEEL AREA : 950.52 Sq.mm.

REQD. CONCRETE AREA: 121549.48 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1723.88 Muz1 : 67.00 Muy1 : 67.00

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 208
END JOINT: 256 Puz : 1835.23 Muz : 84.65 Muy : 84.65 IR: 0.79
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 477 D E S I G N R E S U L T S

M25 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2850.0 mm CROSS SECTION: 350.0 mm X 350.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 209 END JOINT: 257 SHORT COLUMN

REQD. STEEL AREA : 1026.72 Sq.mm.

REQD. CONCRETE AREA: 121473.28 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.03%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 300 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1751.59 Muz1 : 70.71 Muy1 : 70.71

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 209
END JOINT: 257 Puz : 1835.23 Muz : 84.66 Muy : 84.66 IR: 0.83

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 114 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 115

============================================================================

********************END OF COLUMN DESIGN RESULTS********************

381. CONCRETE TAKE

382. END CONCRETE DESIGN

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 115 of 116

 01 January 2025 16:56

STAAD SPACE -- PAGE NO. 116

************** CONCRETE TAKE OFF **************

(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.

TOTAL VOLUME OF CONCRETE = 51.9 CU.METER

BAR DIA WEIGHT

(in mm) (in New)
-------- --------
8 9055
10 5082
12 9278
16 6199
20 12249
------------
*** TOTAL= 41862

383. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= JAN 1,2025 TIME= 16:56:38 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2017 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

C:\Users\hp\Desktop\Aakash\APPROV~1\Staad\TYPEB~1\Type B.anl Page 116 of 116