Components of MP Cep
Uploaded by
ahmad hassaanComponents of MP Cep
Uploaded by
ahmad hassaanInput Device:
Input from user is received by a keypad which has four push buttons.
Figure 1 (push Button)
STOP/Clear:
If the microwave is in on condition, this button turns it off and pauses the timer count down. If
you are setting the timer, this button clears the time to 00:00. Useful if you have made some
mistake during setting.
START:
If you have paused the timer to open the oven and check the status of food, this button will
resume the timer. After time is setup you need to press this to turn the microwave.
Increment:
Increment time, by press 1 time to increase the 30 sec.
Pause:
Pause the circuit on the spot.
Led:
Check the circuit working
AVR Microcontroller:
ATmega16 is high performance microcontroller from the Atmel’s Mega AVR family. Atmega16
is a 40 pin microcontroller based on enhanced RISC (Reduced Instruction.
Data sheet:
Figure 2(Data sheet)
Dc motor:
DC Motor is a device which transforms electrical energy into mechanical energy specifically; a
DC motor uses DC current to convert electrical energy into mechanical energy. The direction of
the motor is controlled by reversing the current.
Figure 3(Dc Motor)
Power supply:
This provides 5v regulated DC power to the microcontroller. It receives input 12V DC from
a 12V adapter.
Resistor:
In this circuit we use the resiters to limit the flow of current.
Output Device:
LCD Display:
A 16×2 alphanumeric LCD Module is used as the main output device. It can display numbers,
alphabets and few symbols. It can show two line and each line can have 16 characters. The
backlight enables the text to be visible even in dark.
Buzzer:
A buzzer beeps when the system receive input from the user and the input is successfully
processed.
